summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-15gpio: rcar: Add R-Car V3U (R8A779A0) supportGeert Uytterhoeven
Add support for the GPIO controller block in the R-Car V3U (R8A779A0) SoC, which is very similar to the block found on other R-Car Gen3 SoCs. However, this block has a new General Input Enable Register (INEN), whose reset state is to have all inputs disabled. Enable input for all available pins in probe and resume, to support the use of the General Input Register (INDT) for reading pin state at all times. This preserves backwards compatibility with other R-Car Gen3 SoCs, as recommended by the Hardware Manual. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: rcar: Optimize GPIO pin state read on R-Car Gen3Geert Uytterhoeven
Currently, the R-Car GPIO driver treats R-Car Gen2 and R-Car Gen3 GPIO controllers the same. However, there exist small differences, like the behavior of the General Input Register (INDT): - On R-Car Gen1, R-Car Gen2, and RZ/G1, INDT only reflects the state of an input pin if the GPIO is configured for input, - On R-Car Gen3 and RZ/G2, INDT always reflects the state of the input pins. Hence to accommodate all variants, the driver does not use the INDT register to read the status of a GPIO line when configured for output, at the expense of doing 2 or 3 register reads instead of 1. Given register accesses are slow, change the .get() and .get_multiple() callbacks to always use INDT to read pin state on SoCs where this is supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15dt-bindings: gpio: rcar: Add r8a779a0 supportGeert Uytterhoeven
Document the compatible value for the GPIO block in the Renesas R-Car V3U (R8A779A0) SoC. While this GPIO block is mostly compatible with GPIO blocks on R-Car Gen3 SoCs, there are small differences, and one of the new registers needs to be configured differently from its initial reset state. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: bd7xxxx: use helper variable for pdev->devBartosz Golaszewski
Using a helper local variable to store the address of &pdev->dev adds to readability and allows us to avoid unnecessary line breaks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
2021-02-15gpio: tegra: Convert to gpio_irq_chipThierry Reding
Convert the Tegra GPIO driver to use the gpio_irq_chip infrastructure. This allows a bit of boiler plate to be removed and while at it enables support for hierarchical domains, which is useful to support PMC wake events on Tegra210 and earlier. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driverNobuhiro Iwamatsu
Add the GPIO node in Toshiba Visconti5 SoC-specific DT file. And enable the GPIO node in TMPV7708 RM main board's board-specific DT file. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15MAINTAINERS: Add entries for Toshiba Visconti GPIO controllerNobuhiro Iwamatsu
Add entries for Toshiba Visconti GPIO Controller binding and driver. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: visconti: Add Toshiba Visconti GPIO supportNobuhiro Iwamatsu
Add the GPIO driver for Toshiba Visconti ARM SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15dt-bindings: gpio: Add bindings for Toshiba Visconti GPIO ControllerNobuhiro Iwamatsu
Add bindings for the Toshiba Visconti GPIO Controller. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15dt-bindings: gpio: Add compatible string for AM64 SoCAswath Govindraju
Add compatible string for AM64 SoC in device tree binding of davinci GPIO modules as the same IP is used. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: bd7xxxx: Do not depend on parent driver dataMatti Vaittinen
The ROHM BD70528 and BD71828 GPIO drivers only need the regmap pointer from parent. Regmap can be obtained via dev_get_regmap() so do not require parent to populate driver data for that. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: Kconfig: Update help description for GPIO_RCAR configLad Prabhakar
The gpio-rcar driver also supports RZ/G SoC's, update the description to reflect this. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: sl28cpld: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: rcar: Remove redundant compatible valuesLad Prabhakar
The mandatory compatible values 'renesas,rcar-gen{1,2,3}-gpio' have been already added to all the respective R-Car Gen{1,2,3} SoC DTSI files, remove the redundant device specific values from the driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15docs: gpio: intro: Improve HTML formattingJonathan Neuschäfer
Currently the HTML output for Documentation/driver-api/gpio/intro.rst doesn't look right. The lines that start with LOW or HIGH are formatted in bold, while the next line after each is not bold. With this patch, the HTML looks better. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15docs: gpio: Fix formatting in description of gpiod_*_array_* functionsJonathan Neuschäfer
The gpiod_*_array_* functions take four arguments, not three. Additionally, the formatting of the "value_bitmap" line results in misformatted HTML, so fix that. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: fix spelling mistake in Kconfig "supprot" -> "support"Colin Ian King
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15lib/vsprintf: no_hash_pointers prints all addresses as unhashedTimur Tabi
If the no_hash_pointers command line parameter is set, then printk("%p") will print pointers as unhashed, which is useful for debugging purposes. This change applies to any function that uses vsprintf, such as print_hex_dump() and seq_buf_printf(). A large warning message is displayed if this option is enabled. Unhashed pointers expose kernel addresses, which can be a security risk. Also update test_printf to skip the hashed pointer tests if the command-line option is set. Signed-off-by: Timur Tabi <timur@kernel.org> Acked-by: Petr Mladek <pmladek@suse.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Marco Elver <elver@google.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210214161348.369023-4-timur@kernel.org
2021-02-15kselftest: add support for skipped testsTimur Tabi
Update the kselftest framework to allow client drivers to specify that some tests were skipped. Signed-off-by: Timur Tabi <timur@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Acked-by: Marco Elver <elver@google.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210214161348.369023-3-timur@kernel.org
2021-02-15lib: use KSTM_MODULE_GLOBALS macro in kselftest driversTimur Tabi
Instead of defining the total/failed test counters manually, test drivers that are clients of kselftest should use the macro created for this purpose. Signed-off-by: Timur Tabi <timur@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Marco Elver <elver@google.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210214161348.369023-2-timur@kernel.org
2021-02-15mmc: sdhci-esdhc-imx: fix kernel panic when remove moduleFrank Li
In sdhci_esdhc_imx_remove() the SDHCI_INT_STATUS in read. Under some circumstances, this may be done while the device is runtime suspended, triggering the below splat. Fix the problem by adding a pm_runtime_get_sync(), before reading the register, which will turn on clocks etc making the device accessible again. [ 1811.323148] mmc1: card aaaa removed [ 1811.347483] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 1811.354988] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core [last unloaded: mmc_core] [ 1811.365726] CPU: 0 PID: 3464 Comm: rmmod Not tainted 5.10.1-sd-99871-g53835a2e8186 #5 [ 1811.373559] Hardware name: Freescale i.MX8DXL EVK (DT) [ 1811.378705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 1811.384723] pc : sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.391090] lr : platform_drv_remove+0x2c/0x50 [ 1811.395536] sp : ffff800012c7bcb0 [ 1811.398855] x29: ffff800012c7bcb0 x28: ffff00002c72b900 [ 1811.404181] x27: 0000000000000000 x26: 0000000000000000 [ 1811.409497] x25: 0000000000000000 x24: 0000000000000000 [ 1811.414814] x23: ffff0000042b3890 x22: ffff800009127120 [ 1811.420131] x21: ffff00002c4c9580 x20: ffff0000042d0810 [ 1811.425456] x19: ffff0000042d0800 x18: 0000000000000020 [ 1811.430773] x17: 0000000000000000 x16: 0000000000000000 [ 1811.436089] x15: 0000000000000004 x14: ffff000004019c10 [ 1811.441406] x13: 0000000000000000 x12: 0000000000000020 [ 1811.446723] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f [ 1811.452040] x9 : fefefeff6364626d x8 : 7f7f7f7f7f7f7f7f [ 1811.457356] x7 : 78725e6473607372 x6 : 0000000080808080 [ 1811.462673] x5 : 0000000000000000 x4 : 0000000000000000 [ 1811.467990] x3 : ffff800011ac1cb0 x2 : 0000000000000000 [ 1811.473307] x1 : ffff8000091214d4 x0 : ffff8000133a0030 [ 1811.478624] Call trace: [ 1811.481081] sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.487098] platform_drv_remove+0x2c/0x50 [ 1811.491198] __device_release_driver+0x188/0x230 [ 1811.495818] driver_detach+0xc0/0x14c [ 1811.499487] bus_remove_driver+0x5c/0xb0 [ 1811.503413] driver_unregister+0x30/0x60 [ 1811.507341] platform_driver_unregister+0x14/0x20 [ 1811.512048] sdhci_esdhc_imx_driver_exit+0x1c/0x3a8 [sdhci_esdhc_imx] [ 1811.518495] __arm64_sys_delete_module+0x19c/0x230 [ 1811.523291] el0_svc_common.constprop.0+0x78/0x1a0 [ 1811.528086] do_el0_svc+0x24/0x90 [ 1811.531405] el0_svc+0x14/0x20 [ 1811.534461] el0_sync_handler+0x1a4/0x1b0 [ 1811.538474] el0_sync+0x174/0x180 [ 1811.541801] Code: a9025bf5 f9403e95 f9400ea0 9100c000 (b9400000) [ 1811.547902] ---[ end trace 3fb1a3bd48ff7be5 ]--- Signed-off-by: Frank Li <Frank.Li@nxp.com> Cc: stable@vger.kernel.org # v4.0+ Link: https://lore.kernel.org/r/20210210181933.29263-1-Frank.Li@nxp.com [Ulf: Clarified the commit message a bit] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-15mmc: host: Retire MMC_GOLDFISHRoman Kiryanov
Android Studio Emulator no longer uses this driver, so let's drop it. Signed-off-by: Roman Kiryanov <rkir@google.com> Link: https://lore.kernel.org/r/20210209190850.16647-1-rkir@google.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-15mmc: cb710: Use new tasklet APIEmil Renner Berthing
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/20210208134551.39696-1-kernel@esmil.dk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-15mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failureShirley Her
Force chip enter L0 power state during SDR104 HW tuning to avoid tuning failure Signed-off-by: Shirley Her <shirley.her@bayhubtech.com> Link: https://lore.kernel.org/r/20210206014051.3418-1-shirley.her@bayhubtech.com Fixes: 7b7d897e8898 ("mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-15Merge branch 'edac-misc' into edac-updates-for-v5.12Borislav Petkov
2021-02-15ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setupTakashi Iwai
HP Spectre x360 14 model (PCI SSID 103c:87f7) seems requiring a unique setup for its external amp: the GPIO0 needs to be toggled on and off shortly at each device initialization via runtime PM. This patch implements that workaround as well as the model option string, so that users with other devices may try the same workaround more easily. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210633 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210215082540.4520-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-02-15Merge branch 'for-next' into for-linusTakashi Iwai
Unification of 5.12-devel branches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-02-15xen-blkback: fix error handling in xen_blkbk_map()Jan Beulich
The function uses a goto-based loop, which may lead to an earlier error getting discarded by a later iteration. Exit this ad-hoc loop when an error was encountered. The out-of-memory error path additionally fails to fill a structure field looked at by xen_blkbk_unmap_prepare() before inspecting the handle which does get properly set (to BLKBACK_INVALID_HANDLE). Since the earlier exiting from the ad-hoc loop requires the same field filling (invalidation) as that on the out-of-memory path, fold both paths. While doing so, drop the pr_alert(), as extra log messages aren't going to help the situation (the kernel will log oom conditions already anyway). This is XSA-365. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15xen-scsiback: don't "handle" error by BUG()Jan Beulich
In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15xen-netback: don't "handle" error by BUG()Jan Beulich
In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15xen-blkback: don't "handle" error by BUG()Jan Beulich
In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15xen/arm: don't ignore return errors from set_phys_to_machineStefano Stabellini
set_phys_to_machine can fail due to lack of memory, see the kzalloc call in arch/arm/xen/p2m.c:__set_phys_to_machine_multi. Don't ignore the potential return error in set_foreign_p2m_mapping, returning it to the caller instead. This is part of XSA-361. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Cc: stable@vger.kernel.org Reviewed-by: Julien Grall <jgrall@amazon.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15Xen/gntdev: correct error checking in gntdev_map_grant_pages()Jan Beulich
Failure of the kernel part of the mapping operation should also be indicated as an error to the caller, or else it may assume the respective kernel VA is okay to access. Furthermore gnttab_map_refs() failing still requires recording successfully mapped handles, so they can be unmapped subsequently. This in turn requires there to be a way to tell full hypercall failure from partial success - preset map_op status fields such that they won't "happen" to look as if the operation succeeded. Also again use GNTST_okay instead of implying its value (zero). This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()Jan Beulich
We may not skip setting the field in the unmap structure when GNTMAP_device_map is in use - such an unmap would fail to release the respective resources (a page ref in the hypervisor). Otoh the field doesn't need setting at all when GNTMAP_device_map is not in use. To record the value for unmapping, we also better don't use our local p2m: In particular after a subsequent change it may not have got updated for all the batch elements. Instead it can simply be taken from the respective map's results. We can additionally avoid playing this game altogether for the kernel part of the mappings in (x86) PV mode. This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()Jan Beulich
We should not set up further state if either mapping failed; paying attention to just the user mapping's status isn't enough. Also use GNTST_okay instead of implying its value (zero). This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15Xen/x86: don't bail early from clear_foreign_p2m_mapping()Jan Beulich
Its sibling (set_foreign_p2m_mapping()) as well as the sibling of its only caller (gnttab_map_refs()) don't clean up after themselves in case of error. Higher level callers are expected to do so. However, in order for that to really clean up any partially set up state, the operation should not terminate upon encountering an entry in unexpected state. It is particularly relevant to notice here that set_foreign_p2m_mapping() would skip setting up a p2m entry if its grant mapping failed, but it would continue to set up further p2m entries as long as their mappings succeeded. Arguably down the road set_foreign_p2m_mapping() may want its page state related WARN_ON() also converted to an error return. This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-14mailbox: tegra-hsp: Set lockdep class dynamicallyMikko Perttunen
On Tegra194, due to both BPMP and TCU using mailboxes, we get a lockdep spew at boot. Both are using different instances of HSP, so this is harmless. As such give each HSP instance a different lockdep class. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14mailbox: sprd: correct definition of SPRD_OUTBOX_FIFO_FULLMagnum Shan
According to the specification, bit[2] represents SPRD_OUTBOX_FIFO_FULL, not bit[0], so correct it. Fixes: ca27fc26cd22 ("mailbox: sprd: Add Spreadtrum mailbox driver") Signed-off-by: Magnum Shan <magnum.shan@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14mailbox: arm_mhuv2: make remove callback return voidUwe Kleine-König
My build tests failed to catch that amba driver that would have needed adaption in commit 3fd269e74f2f ("amba: Make the remove callback return void"). Change the remove function to make the driver build again. Reported-by: kernel test robot <lkp@intel.com> Fixes: 3fd269e74f2f ("amba: Make the remove callback return void") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14mailbox: arm_mhuv2: Fix sparse warningsViresh Kumar
This patch fixes a bunch of sparse warnings in the newly added arm_mhuv2 driver. drivers/mailbox/arm_mhuv2.c:506:24: warning: incorrect type in argument 1 (different address spaces) drivers/mailbox/arm_mhuv2.c:506:24: expected void const volatile [noderef] __iomem *addr drivers/mailbox/arm_mhuv2.c:506:24: got unsigned int [usertype] * drivers/mailbox/arm_mhuv2.c:547:42: warning: incorrect type in argument 2 (different address spaces) drivers/mailbox/arm_mhuv2.c:547:42: expected unsigned int [usertype] *reg drivers/mailbox/arm_mhuv2.c:547:42: got unsigned int [noderef] __iomem * drivers/mailbox/arm_mhuv2.c:625:42: warning: incorrect type in argument 2 (different address spaces) drivers/mailbox/arm_mhuv2.c:625:42: expected unsigned int [usertype] *reg drivers/mailbox/arm_mhuv2.c:625:42: got unsigned int [noderef] __iomem * drivers/mailbox/arm_mhuv2.c:972:24: warning: dereference of noderef expression drivers/mailbox/arm_mhuv2.c:973:22: warning: dereference of noderef expression drivers/mailbox/arm_mhuv2.c:993:25: warning: dereference of noderef expression drivers/mailbox/arm_mhuv2.c:1026:24: warning: dereference of noderef expression drivers/mailbox/arm_mhuv2.c:1027:22: warning: dereference of noderef expression drivers/mailbox/arm_mhuv2.c:1048:17: warning: dereference of noderef expression Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14mailbox: qcom: Add support for SDX55 APCS IPCManivannan Sadhasivam
In SDX55, the IPC bits are located in the APCS GCC block. Also, this block can provide clock functionality. Hence, add support for IPC with correct offset and name of the clock provider. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14dt-bindings: mailbox: Add binding for SDX55 APCSManivannan Sadhasivam
Add devicetree YAML binding for SDX55 APCS GCC block. The APCS block acts as the mailbox controller and also provides a clock output and takes 3 clock sources (pll, aux, ref) as input. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14mailbox: omap: Add support for K3 AM64x SoCsSuman Anna
The AM64x SoC contains a Mailbox IP instance with multiple clusters in the MAIN domain, and is a variant of the IP on current AM65x and J721E SoCs. The AM64x SoC has only 8 clusters with no interrupts routed to the A53 core on the first 2 clusters. The interrupt outputs from the IP do not go through any Interrupt Routers and are hard-wired to each processor, with only couple of interrupts from each cluster reaching the A53 core. The IP is also not built with the K3 safety feature in hardware. Add the support for this IP through a new compatible. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14dt-bindings: mailbox: omap: Update binding for AM64x SoCsSuman Anna
Update the existing OMAP Mailbox binding to include the info for AM64x SoCs. There are some minor IP integration differences between the AM64x SoCs and the previous AM65x and J721E SoC families. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14mailbox: qcom: Add SC8180X apcs compatibleBjorn Andersson
The Qualcomm SC8180X platform has a APSS block exposing the usual IPC bits, add a compatible for this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14dt-bindings: mailbox: qcom: Add SC8180X APCS compatibleBjorn Andersson
Add compatible for the Qualcomm SC8180x APCS block to the Qualcomm APCS binding. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-15pinctrl: mediatek: Fix trigger type setting follow for unexpected interruptHailong Fan
When flipping the polarity will be generated interrupt under certain circumstances, but GPIO external signal has not changed. Then, mask the interrupt before polarity setting, and clear the unexpected interrupt after trigger type setting completed. Remove mtk_eint_flip_edge: because mtk_eint_unmask already calls it. Signed-off-by: Hailong Fan <hailong.fan@mediatek.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Link: https://lore.kernel.org/r/20210125041753.2214-1-hailong.fan@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-14lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid()Andy Shevchenko
There is a specific API to treat raw data as GUID, i.e. export_guid() and import_guid(). Use them instead of guid_copy() with explicit casting. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-14lightnvm: fix unnecessary NULL check warningsTian Tao
Remove NULL checks before vfree() to fix these warnings: ./drivers/lightnvm/pblk-gc.c:27:2-7: WARNING: NULL check before some freeing functions is not needed. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-14Merge branch 'mvpp2-next'David S. Miller
Stefan Chulski says: ==================== net: mvpp2: Minor non functional driver code improvements The patch series contains minor code improvements and did not change any functionality. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 12:02:54 +0000