summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-08Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug updates from Thomas Gleixner: "A small set of updates for SMP and CPU hotplug: - Abort disabling secondary CPUs in the freezer when a wakeup is pending instead of evaluating it only after all CPUs have been offlined. - Remove the shared annotation for the strict per CPU cfd_data in the smp function call core code. - Remove the return values of smp_call_function() and on_each_cpu() as they are unconditionally 0. Fixup the few callers which actually bothered to check the return value" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Remove smp_call_function() and on_each_cpu() return values smp: Do not mark call_function_data as shared cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()
2019-07-08watchdog: renesas_wdt: Add a few cycles delayYoshihiro Shimoda
According to the hardware manual of R-Car Gen2 and Gen3, software should wait a few RLCK cycles as following: - Delay 2 cycles before setting watchdog counter. - Delay 3 cycles before disabling module clock. So, this patch adds such delays. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: gpio: add support for nowayout optionMans Rullgard
Add support for the nowayout option in the gpio watchdog driver. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08Merge branch 'core-rslib-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull Reed-Solomon library updates from Thomas Gleixner: "A cleanup and fixes series from Ferdinand Blomqvist who analyzed the original Reed-Solomon library from Phil Karn on which the kernel implementation is based on. This comes with a test module which verifies all the various corner cases for correctness" * 'core-rslib-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rslib: Make some functions static rslib: Fix remaining decoder flaws rslib: Update documentation rslib: Fix handling of of caller provided syndrome rslib: decode_rs: Code cleanup rslib: decode_rs: Fix length parameter check rslib: Fix decoding of shortened codes rslib: Add tests for the encoder and decoder
2019-07-08Merge branch 'core-debugobjects-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects updates from Thomas Gleixner: "A set of updates for debugobjects: - A series of changes to make debugobjects more scalable by introducing per cpu pools and reducing the number of lock acquisitions - debugfs cleanup" * 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobjects: Move printk out of db->lock critical sections debugobjects: Less aggressive freeing of excess debug objects debugobjects: Reduce number of pool_lock acquisitions in fill_pool() debugobjects: Percpu pool lookahead freeing/allocation debugobjects: Add percpu free pools debugobjects: No need to check return value of debugfs_create()
2019-07-08IB/mlx5: Report correctly tag matching rendezvous capabilityDanit Goldberg
Userspace expects the IB_TM_CAP_RC bit to indicate that the device supports RC transport tag matching with rendezvous offload. However the firmware splits this into two capabilities for eager and rendezvous tag matching. Only if the FW supports both modes should userspace be told the tag matching capability is available. Cc: <stable@vger.kernel.org> # 4.13 Fixes: eb761894351d ("IB/mlx5: Fill XRQ capabilities") Signed-off-by: Danit Goldberg <danitg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08docs: infiniband: add it to the driver-api booksetMauro Carvalho Chehab
While this contains some uAPI stuff, it was intended to be read by a kernel doc. So, let's not move it to a different dir, but, instead, just add it to the driver-api bookset. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08ubifs: Correctly use tnc_next() in search_dh_cookie()Richard Weinberger
Commit c877154d307f fixed an uninitialized variable and optimized the function to not call tnc_next() in the first iteration of the loop. While this seemed perfectly legit and wise, it turned out to be illegal. If the lookup function does not find an exact match it will rewind the cursor by 1. The rewinded cursor will not match the name hash we are looking for and this results in a spurious -ENOENT. So we need to move to the next entry in case of an non-exact match, but not if the match was exact. While we are here, update the documentation to avoid further confusion. Cc: Hyunchul Lee <hyc.lee@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: c877154d307f ("ubifs: Fix uninitialized variable in search_dh_cookie()") Fixes: 781f675e2d7e ("ubifs: Fix unlink code wrt. double hash lookups") Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-08Merge tag 's390-5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Improve stop_machine wait logic: replace cpu_relax_yield call in generic stop_machine function with a weak stop_machine_yield function. This is overridden on s390, which yields the current cpu to the neighbouring cpu after a couple of retries, instead of blindly giving up the cpu to the hipervisor. This significantly improves stop_machine performance on s390 in overcommitted scenarios. This includes common code changes which have been Acked by Peter Zijlstra and Thomas Gleixner. - Improve jump label transformation speed: transform jump labels without using stop_machine. - Refactoring of the vfio-ccw cp handling, simplifying the code and avoiding unneeded allocating/copying. - Various vfio-ccw fixes (ccw translation, state machine). - Add support for vfio-ap queue interrupt control in the guest. This includes s390 kvm changes which have been Acked by Christian Borntraeger. - Add protected virtualization support for virtio-ccw. - Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to remove some code which most likely isn't working at all, besides that s390 didn't even compile for !CONFIG_SMP. - Support for special flagged EP11 CPRBs for zcrypt. - Handle PCI devices with no support for new MIO instructions. - Avoid KASAN false positives in reworked stack unwinder. - Couple of fixes for the QDIO layer. - Convert s390 specific documentation to ReST format. - Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if hardware is missing. This way our modules behave like most other modules and which is also what systemd's systemd-modules-load.service expects. - Replace defconfig with performance_defconfig, so there is one config file less to maintain. - Remove the SCLP call home device driver, which was never useful. - Cleanups all over the place. * tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits) docs: s390: s390dbf: typos and formatting, update crash command docs: s390: unify and update s390dbf kdocs at debug.c docs: s390: restore important non-kdoc parts of s390dbf.rst vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1 s390/pci: correctly handle MIO opt-out s390/pci: deal with devices that have no support for MIO instructions s390: ap: kvm: Enable PQAP/AQIC facility for the guest s390: ap: implement PAPQ AQIC interception in kernel vfio: ap: register IOMMU VFIO notifier s390: ap: kvm: add PQAP interception for AQIC s390/unwind: cleanup unused READ_ONCE_TASK_STACK s390/kasan: avoid false positives during stack unwind s390/qdio: don't touch the dsci in tiqdio_add_input_queues() s390/qdio: (re-)initialize tiqdio list entries s390/dasd: Fix a precision vs width bug in dasd_feature_list() s390/cio: introduce driver_override on the css bus vfio-ccw: make convert_ccw0_to_ccw1 static vfio-ccw: Remove copy_ccw_from_iova() vfio-ccw: Factor out the ccw0-to-ccw1 transition vfio-ccw: Copy CCW data outside length calculation ...
2019-07-08xtensa: abstract 'entry' and 'retw' in assembly codeMax Filippov
Provide abi_entry, abi_entry_default, abi_ret and abi_ret_default macros that allocate aligned stack frame in windowed and call0 ABIs. Provide XTENSA_SPILL_STACK_RESERVE macro that specifies required stack frame size when register spilling is involved. Replace all uses of 'entry' and 'retw' with the above macros. This makes most of the xtensa assembly code ready for XEA3 and call0 ABI. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-07-08Merge tag 'm68k-for-v5.3-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - switch to using the generic remapping DMA allocator - defconfig updates * tag 'm68k-for-v5.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Implement arch_dma_prep_coherent() m68k: Use the generic dma coherent remap allocator m68k: defconfig: Update defconfigs for v5.2-rc1
2019-07-08Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
2019-07-08Merge branch 'vhca-tunnel' into rdma.git for-nextJason Gunthorpe
Max Gurtovoy says: ==================== Those two patches introduce VHCA tunnel mechanism to DEVX interface needed for Bluefield SOC. See extensive commit messages for more information. ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'vcha-tunnel': IB/mlx5: Implement VHCA tunnel mechanism in DEVX net/mlx5: Introduce VHCA tunnel device capability
2019-07-08tools arch x86: Sync asm/cpufeatures.h with the with the kernelArnaldo Carvalho de Melo
To pick up the changes in: 6dbbf5ec9e1e ("x86/cpufeatures: Enumerate user wait instructions") b302e4b176d0 ("x86/cpufeatures: Enumerate the new AVX512 BFLOAT16 instructions") acec0ce081de ("x86/cpufeatures: Combine word 11 and 12 into a new scattered features word") cbb99c0f5887 ("x86/cpufeatures: Add FDP_EXCPTN_ONLY and ZERO_FCS_FDS") That don't affect anything in tools/. This silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Aaron Lewis <aaronlewis@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/n/tip-y60wnyg2fuxi0hx7icruo9po@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-08IB/mlx5: Implement VHCA tunnel mechanism in DEVXMax Gurtovoy
This mechanism will allow function-A to perform operations "on behalf" of function-B via tunnel object. Function-A will have privileges for creating and using this tunnel object. For example, in the device emulation feature presented in Bluefield-1 SoC, using device emulation capability, one can present NVMe function to the host OS. Since the NVMe function doesn't have a normal command interface to the HCA HW, here is a need to create a channel that will be able to issue commands "on behalf" of this function. This channel is the VHCA_TUNNEL general object. The emulation software will create this tunnel for every managed function and issue commands via devx general cmd interface using the appropriate tunnel ID. When devX context will receive a command with non-zero vhca_tunnel_id, it will pass the command as-is down to the HCA. All the validation, security and resource tracking of the commands and the created tunneled objects is in the responsibility of the HCA FW. When a VHCA_TUNNEL object destroyed, the device will issue an internal FLR (function level reset) to the emulated function associated with this tunnel. This will destroy all the created resources using the tunnel mechanism. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08Merge remote-tracking branch 'tip/perf/core' into perf/urgentArnaldo Carvalho de Melo
To pick up fixes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-08Merge tag 'v5.2' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-08RDMA/rvt: Do not use a kernel header in the ABIJason Gunthorpe
rvt was using ib_sge as part of it's ABI, which is not allowed. Introduce a new struct with the same layout and use it instead. Fixes: dabac6e460ce ("IB/hfi1: Move receive work queue struct into uapi directory") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08KVM: arm/arm64: Initialise host's MPIDRs by reading the actual registerMarc Zyngier
As part of setting up the host context, we populate its MPIDR by using cpu_logical_map(). It turns out that contrary to arm64, cpu_logical_map() on 32bit ARM doesn't return the *full* MPIDR, but a truncated version. This leaves the host MPIDR slightly corrupted after the first run of a VM, since we won't correctly restore the MPIDR on exit. Oops. Since we cannot trust cpu_logical_map(), let's adopt a different strategy. We move the initialization of the host CPU context as part of the per-CPU initialization (which, in retrospect, makes a lot of sense), and directly read the MPIDR from the HW. This is guaranteed to work on both arm and arm64. Reported-by: Andre Przywara <Andre.Przywara@arm.com> Tested-by: Andre Przywara <Andre.Przywara@arm.com> Fixes: 32f139551954 ("arm/arm64: KVM: Statically configure the host's view of MPIDR") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-08tools: bpftool: add completion for bpftool prog "loadall"Quentin Monnet
Bash completion for proposing the "loadall" subcommand is missing. Let's add it to the completion script. Add a specific case to propose "load" and "loadall" for completing: $ bpftool prog load ^ cursor is here Otherwise, completion considers that $command is in load|loadall and starts making related completions (file or directory names, as the number of words on the command line is below 6), when the only suggested keywords should be "load" and "loadall" until one has been picked and a space entered after that to move to the next word. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08bpf: avoid unused variable warning in tcp_bpf_rtt()Arnd Bergmann
When CONFIG_BPF is disabled, we get a warning for an unused variable: In file included from drivers/target/target_core_device.c:26: include/net/tcp.h:2226:19: error: unused variable 'tp' [-Werror,-Wunused-variable] struct tcp_sock *tp = tcp_sk(sk); The variable is only used in one place, so it can be replaced with its value there to avoid the warning. Fixes: 23729ff23186 ("bpf: add BPF_CGROUP_SOCK_OPS callback that is executed on every RTT") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08bpf: cgroup: Fix build error without CONFIG_NETYueHaibing
If CONFIG_NET is not set and CONFIG_CGROUP_BPF=y, gcc building fails: kernel/bpf/cgroup.o: In function `cg_sockopt_func_proto': cgroup.c:(.text+0x237e): undefined reference to `bpf_sk_storage_get_proto' cgroup.c:(.text+0x2394): undefined reference to `bpf_sk_storage_delete_proto' kernel/bpf/cgroup.o: In function `__cgroup_bpf_run_filter_getsockopt': (.text+0x2a1f): undefined reference to `lock_sock_nested' (.text+0x2ca2): undefined reference to `release_sock' kernel/bpf/cgroup.o: In function `__cgroup_bpf_run_filter_setsockopt': (.text+0x3006): undefined reference to `lock_sock_nested' (.text+0x32bb): undefined reference to `release_sock' Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Stanislav Fomichev <sdf@fomichev.me> Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08RDMA/siw: Fix DEFINE_PER_CPU compilation when ARCH_NEEDS_WEAK_PER_CPUJason Gunthorpe
The initializer for the variable cannot be inside the macro (and zero initialization isn't needed anyhow). include/linux/percpu-defs.h:92:33: warning: '__pcpu_unique_use_cnt' initialized and declared 'extern' extern __PCPU_DUMMY_ATTRS char __pcpu_unique_##name; \ ^~~~~~~~~~~~~~ include/linux/percpu-defs.h:115:2: note: in expansion of macro 'DEFINE_PER_CPU_SECTION' DEFINE_PER_CPU_SECTION(type, name, "") ^~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/sw/siw/siw_main.c:129:8: note: in expansion of macro 'DEFINE_PER_CPU' static DEFINE_PER_CPU(atomic_t, use_cnt = ATOMIC_INIT(0)); ^~~~~~~~~~~~~~ Also the rules for PER_CPU require the variable names to be globally unique, so prefix them with siw_ Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08selftests/bpf: fix test_attach_probe map definitionAndrii Nakryiko
ef99b02b23ef ("libbpf: capture value in BTF type info for BTF-defined map defs") changed BTF-defined maps syntax, while independently merged 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") added new test using outdated syntax of maps. This patch fixes this test after corresponding patch sets were merged. Fixes: ef99b02b23ef ("libbpf: capture value in BTF type info for BTF-defined map defs") Fixes: 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08Merge branch 'bpf-sockaddr-wide-store'Daniel Borkmann
Stanislav Fomichev says: ==================== Clang can generate 8-byte stores for user_ip6 & msg_src_ip6, let's support that on the verifier side. v3: * fix comments spelling an -> and (Andrii Nakryiko) v2: * Add simple cover letter (Yonghong Song) * Update comments (Yonghong Song) * Remove [4] selftests (Yonghong Song) ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08selftests/bpf: add verifier tests for wide storesStanislav Fomichev
Make sure that wide stores are allowed at proper (aligned) addresses. Note that user_ip6 is naturally aligned on 8-byte boundary, so correct addresses are user_ip6[0] and user_ip6[2]. msg_src_ip6 is, however, aligned on a 4-byte bondary, so only msg_src_ip6[1] can be wide-stored. Cc: Andrii Nakryiko <andriin@fb.com> Cc: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08bpf: sync bpf.h to tools/Stanislav Fomichev
Sync user_ip6 & msg_src_ip6 comments. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08bpf: allow wide (u64) aligned stores for some fields of bpf_sock_addrStanislav Fomichev
Since commit cd17d7770578 ("bpf/tools: sync bpf.h") clang decided that it can do a single u64 store into user_ip6[2] instead of two separate u32 ones: # 17: (18) r2 = 0x100000000000000 # ; ctx->user_ip6[2] = bpf_htonl(DST_REWRITE_IP6_2); # 19: (7b) *(u64 *)(r1 +16) = r2 # invalid bpf_context access off=16 size=8 >From the compiler point of view it does look like a correct thing to do, so let's support it on the kernel side. Credit to Andrii Nakryiko for a proper implementation of bpf_ctx_wide_store_ok. Cc: Andrii Nakryiko <andriin@fb.com> Cc: Yonghong Song <yhs@fb.com> Fixes: cd17d7770578 ("bpf/tools: sync bpf.h") Reported-by: kernel test robot <rong.a.chen@intel.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08kbuild: compile-test exported headers to ensure they are self-containedMasahiro Yamada
Multiple people have suggested compile-testing UAPI headers to ensure they can be really included from user-space. "make headers_check" is obviously not enough to catch bugs, and we often leak unresolved references to user-space. Use the new header-test-y syntax to implement it. Please note exported headers are compile-tested with a completely different set of compiler flags. The header search path is set to $(objtree)/usr/include since exported headers should not include unexported ones. We use -std=gnu89 for the kernel space since the kernel code highly depends on GNU extensions. On the other hand, UAPI headers should be written in more standardized C, so they are compiled with -std=c90. This will emit errors if C++ style comments, the keyword 'inline', etc. are used. Please use C style comments (/* ... */), '__inline__', etc. in UAPI headers. There is additional compiler requirement to enable this test because many of UAPI headers include <stdlib.h>, <sys/ioctl.h>, <sys/time.h>, etc. directly or indirectly. You cannot use kernel.org pre-built toolchains [1] since they lack <stdlib.h>. I reused CONFIG_CC_CAN_LINK to check the system header availability. The intention is slightly different, but a compiler that can link userspace programs provide system headers. For now, a lot of headers need to be excluded because they cannot be compiled standalone, but this is a good start point. [1] https://mirrors.edge.kernel.org/pub/tools/crosstool/index.html Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2019-07-08watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedlyHoan Nguyen An
Add helper variable dev = &pdev->dev Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08dt-bindings: watchdog: add Allwinner H6 watchdogClément Péron
Allwinner H6 has a similar watchdog as the A64 which is already a compatible of the A31. This commit add the H6 compatible. Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: jz4740: Avoid starting watchdog in set_timeoutPaul Cercueil
Previously the jz4740_wdt_set_timeout() function was starting the timer unconditionally, even if it was stopped when that function was entered. Now, the timer will be restarted only if it was already running before this function is called. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: jz4740: Use register names from <linux/mfd/ingenic-tcu.h>Paul Cercueil
Use the macros from <linux/mfd/ingenic-tcu.h> instead of declaring our own. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Reflect changesJerry Hoemann
Bump driver number to reflect recent changes. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Update documentationJerry Hoemann
Update documentation to explain new module parameter kdumptimeout. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Add module parameter kdumptimeout.Jerry Hoemann
Instead of unconditionally stopping the watchdog timer after receipt of a pretimeout NMI, reprogram the timeout based upon module parameter kdumptimeout. The provides a more flexible override than the depricated allow_kdump. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Have core ping watchdog.Jerry Hoemann
Instead of stopping the hw timer during probe, have the core update the timer if the timer is already running. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Advertize max_hw_heartbeat_msJerry Hoemann
Set max_hw_heartbeat_ms instead of max_timeout so that user client can set timeout range in excess of what the underlying hardware supports. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Stop hpwdt on unregister.Jerry Hoemann
Have the WD core stop the watchdog on unregister instead of explicitly calling hpwdt_stop() in hpwdt_exit(). Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: bcm2835_wdt: Fix module autoloadStefan Wahren
The commit 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.") broke module autoloading on Raspberry Pi. So add a module alias this fix this. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: sama5d4: fix WDD value to be always set to maxEugen Hristev
WDD value must be always set to max (0xFFF) otherwise the hardware block will reset the board on the first ping of the watchdog. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08remoteproc: stm32: fix building without ARM SMCCArnd Bergmann
When compile testing this driver without SMCC support enabled, we get a link error: drivers/remoteproc/stm32_rproc.o: In function `stm32_rproc_start': stm32_rproc.c:(.text+0x776): undefined reference to `__arm_smccc_smc' drivers/remoteproc/stm32_rproc.o: In function `stm32_rproc_stop': stm32_rproc.c:(.text+0x92c): undefined reference to `__arm_smccc_smc' Make the actual call to arm_smccc_smc conditional on the Kconfig symbol controlling its implementation. Fixes: 13140de09cc2 ("remoteproc: stm32: add an ST stm32_rproc driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-08drm/komeda: Computing image enhancer internallyjames qian wang (Arm Technology China)
Enable image enhancer when the input data flow is 2x+ upscaling. Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708070000.4945-1-james.qian.wang@arm.com
2019-07-08drm/komeda: Computing layer_split internallyjames qian wang (Arm Technology China)
For layer_split no need user to enable/disable it, but compute it in komeda internally, komeda will enable it if the scaling exceed the acceptable range of scaler. Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708065923.4887-1-james.qian.wang@arm.com
2019-07-08platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"Rajat Jain
Most modern platforms already have the ACPI device "INT33A1" that could be used to attach to the driver. Switch the driver to using that and thus make the intel_pmc_core.c a pure platform_driver. Some of the legacy platforms though, may still not have this ACPI device in their ACPI tables. Thus for such platforms, move the code to manually instantiate a platform_device into a new file of its own. This would instantiate the intel_pmc_core platform device and thus attach to the driver, if the ACPI device for the same ("INT33A1") is not present in a system where it should be. This was discussed here: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1966991.html Signed-off-by: Rajat Jain <rajatja@google.com> [andy: renamed to intel_pmc_core_pltdrv.c to be in align with other drivers] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-08MAINTAINERS: maintain drm/arm drivers in drm-misc for nowDaniel Vetter
From discussions with Liviu it sounded like the komeda team would benefit a bit from more cross-review with other drivers. To make sure komeda is aligned with how similar problems are solved in other drivers (in the end everyone ends up with similar ideas on how to solve various display engine design issues). An option would be to use drm-misc as an incubator for a few kernel releases, at least until the big design items have been tackled: Aside from the four kms properties already landed that we need to take out again there's also a pile of new ones proposed already for komeda. drm-misc seems to work fairly well at encouraging these kind of cross-driver reviews and working on cross-driver infrastructure in drm core. Later on we can move all the drivers out to a dedicated arm tree again (if that's desired). Of coures that would mean Lowry and James need drm-misc commit rights (all other arm contributors have it already I think). Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-5-daniel.vetter@ffwll.ch
2019-07-08drm/komeda: Remove layer_split propertyDaniel Vetter
Properties are uapi like anything else, with all the usual rules regarding review, testcases, open source userspace ... Furthermore driver-private kms properties are highly discouraged, over the past few years we've realized we need to make a serious effort at better standardizing this stuff. Again this probably needs multiple pieces to solve this properly: - Instead of expecting userspace to compute this (and duplicating modeset code), the kernel driver should compute when it's necessary to enable layer_split mode to make a configuration possible. I.e. in komeda_plane_atomic_check() first try komeda_build_layer_data_flow() and if that fails, try komeda_build_layer_split_data_flow(), and set dflow.en_split accordingly. Assuming I understand somewhat correctly what this does. - If this is needed for validation then you want a debugfs file to force this one way or the other, or alternatively use ->atomic_print_state to dump such hidden driver-private state. Depends upon how you do your validation ofc. Fixes: a407a6509393 ("drm/komeda: Add layer split support") Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-4-daniel.vetter@ffwll.ch
2019-07-08drm/komeda: remove img_enhancement propertyDaniel Vetter
Properties are uapi like anything else, with all the usual rules regarding review, testcases, open source userspace ... Furthermore driver-private kms properties are highly discouraged, over the past few years we've realized we need to make a serious effort at better standardizing this stuff. Again this probably needs multiple pieces to solve this properly: - Instead of expecting userspace to compute this (and duplicating modeset code), the kernel driver should compute when it's possible to enable this better up/downscale mode (assuming I understood Liviu correctly on what this does) automatically. - If this is needed for validation then you want a debugfs file to force this one way or the other, or alternatively use ->atomic_print_state to dump such hidden driver-private state. Depends upon how you do your validation ofc. Fixes: 42b6f118f6d1 ("drm/komeda: Add image enhancement support") Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-3-daniel.vetter@ffwll.ch
2019-07-08drm/komeda: remove slave_planes propertyDaniel Vetter
Properties are uapi like anything else, with all the usual rules regarding review, testcases, open source userspace ... Furthermore driver-private kms properties are highly discouraged, over the past few years we've realized we need to make a serious effort at better standardizing this stuff. Again this probably needs multiple pieces to solve this properly: - To make plane configuration less surprising to userspace you propably need to virtualize planes, and reorder which logical plane you map to which physical one dynamically. Instead of exposing a komeda-specific limitation to userspace and expecting them to dtrt. I think msm and rcar-du do that already (and others), if you need people to chat with or example code. - If this is needed for validation, again ->atomic_print_state and the infrastructure around that is your friend. Fixes: 3b9dfa4ef28c ("drm/komeda: Add slave pipeline support") Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-2-daniel.vetter@ffwll.ch
2019-07-08drm/komeda: Remove clock ratio propertyDaniel Vetter
Properties are uapi like anything else, with all the usual rules regarding review, testcases, open source userspace ... Furthermore driver-private kms properties are highly discouraged, over the past few years we've realized we need to make a serious effort at better standardizing this stuff. From the discussion with Liviu the solution for these here needs multiple pieces: - For being able to reliably read the memory clock we need a DT property, plus maybe DT override snippets to fix it if it's wrong. - For exposing plane limitations to userspace there's TEST_ONLY. There is a bit a gap in telling userspace better that scaling doesn't work due to limits (atm a good strategy is to retry again without scaling when adding a plane didn't work the first time around). But that needs a more generic solution, not exposing something extremely komeda specific. - If this is needed by validation tools, you can still expose it in debugfs. We have an entire nice infrastructure for debug printing of kms objects already, see the various atomic_print_state callbacks and infrastructure around them. Fixes: 1f7f9ab7900e ("drm/komeda: Add engine clock requirement check for the downscaling") Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-1-daniel.vetter@ffwll.ch
generated by cgit (git 2.34.1) at 2025-09-22 04:32:40 +0000