| Age | Commit message (Collapse) | Author |
|---|
|
tcp_init_mem is only called by __init tcp_init.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dash function is enabled
These two functions are used to inform dash firmware that driver is been
brought up or brought down. So call these two functions only when hardware dash
function is enabled.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In function "rtl8168_oob_notify", using function "rtl_eri_write" to access
eri register 0xe8, instead of using MAC register "ERIDR" and "ERIAR" to
access it.
For using function "rtl_eri_write" in function "rtl8168_oob_notify", need to
move down "rtl8168_oob_notify" related functions under the function
"rtl_eri_write".
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DASH function not only RTL8168DP can support, but also RTL8168EP.
So change the name of function "r8168dp_check_dash" to "r8168_check_dash".
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the name of function "rtl_w1w0_eri" to "rtl_w0w1_eri".
In this function, the local variable "val" is "write zeros then write ones".
Please see below code.
(val & ~m) | p
In this patch, change the function name from "xx_w1w0_xx" to "xx_w0w1_xx".
The changed function name is more suitable for it's behavior.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change function name from "rtl_w1w0_phy" to "rtl_w0w1_phy".
And its behavior from "write ones then write zeros" to
"write zeros then write ones".
In Realtek internal driver, bitwise operations are almost "write zeros then
write ones". For easy to port hardware parameters from Realtek internal driver
to Linux kernal driver "r8169", we would like to change this function's
behavior and its name.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For RTL8168F RTL8168FB RTL8168G RTL8168GU RTL8411 RTL8411B RTL8402 RTL8107E,
the magic packet enable bit is changed to eri 0xde bit0.
In this patch, change magic packet enable bit of these chips to eri 0xde bit0.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RTL8168FB RTL8168G RTL8168GU RTL8411 RTL8411B RTL8106EUS RTL8402 can
support get mac address from backup mac address register.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RTL8411B can support disable/enable pll function.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RTL8168G also can disable/enable pll function.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One of the error cases for vnet_start_xmit()'s "out_dropped" label
is port == NULL, so only mess with port->clean_timer when port is not NULL.
Signed-off-by: David L Stevens <david.stevens@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dsa_switch_suspend() and dsa_switch_resume() functions are only used
when PM_SLEEP is enabled, so they need #ifdef CONFIG_PM_SLEEP protection
to avoid a compiler warning.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the AppliedMicro X-Gene SOC PCIe host controller driver. The X-Gene
PCIe controller supports up to 8 lanes and GEN3 speed. The X-Gene SOC
supports up to 5 PCIe ports.
[bhelgaas: folded in MAINTAINERS and bindings updates]
Tested-by: Ming Lei <ming.lei@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> (driver)
|
|
Calling ether_setup is redundant since alloc_etherdev calls it.
Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When uhid_get_report() or uhid_set_report() are called, they emit on the
char device a UHID_GET_REPORT or UHID_SET_REPORT message. Then, the
protocol says that the user space asnwers with UHID_GET_REPORT_REPLY
or UHID_SET_REPORT_REPLY.
Unfortunatelly, the current code waits for an event of type UHID_GET_REPORT
or UHID_SET_REPORT instead of the reply one.
Add 1 to UHID_GET_REPORT or UHID_SET_REPORT to actually wait for the
reply, and validate the reply.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Building 32-bit threw a warning on kASLR enabled builds:
arch/x86/boot/compressed/aslr.c: In function ‘mem_avoid_overlap’:
arch/x86/boot/compressed/aslr.c:198:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
avoid.start = (u64)ptr;
^
This fixes the warning; unsigned long should have been used here.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20141001183632.GA11431@www.outflux.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Replace them by using the standard kernel bitmap ops. No functional
change, but makes the code a lot cleaner.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
|
|
* pci/msi:
PCI/MSI: Remove unnecessary temporary variable
PCI/MSI: Use __write_msi_msg() instead of write_msi_msg()
MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg()
PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg()
PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints
PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib
PCI/MSI: Remove unused kobject from struct msi_desc
PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()
PCI/MSI: Move D0 check into pci_msi_check_device()
PCI/MSI: Remove arch_msi_check_device()
irqchip: armada-370-xp: Remove arch_msi_check_device()
PCI/MSI/PPC: Remove arch_msi_check_device()
Conflicts:
drivers/pci/host/pcie-designware.c
|
|
* pci/host-generic:
arm64: Add architectural support for PCI
PCI: Add pci_remap_iospace() to map bus I/O resources
of/pci: Add support for parsing PCI host bridge resources from DT
of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr()
PCI: Add generic domain handling
of/pci: Fix the conversion of IO ranges into IO resources
of/pci: Move of_pci_range_to_resource() to of/address.c
ARM: Define PCI_IOBASE as the base of virtual PCI IO space
of/pci: Add pci_register_io_range() and pci_pio_to_address()
asm-generic/io.h: Fix ioport_map() for !CONFIG_GENERIC_IOMAP
Conflicts:
drivers/pci/host/pci-tegra.c
|
|
* pci/aer:
PCI/AER: Rename PCI_ERR_UNC_TRAIN to PCI_ERR_UNC_UND
PCI/AER: Add additional PCIe AER error strings
trace, RAS: Add additional PCIe AER error strings
trace, RAS: Replace bare numbers with #defines for PCIe AER error strings
* pci/virtualization:
PCI: Add ACS quirk for Intel 10G NICs
|
|
Add headset detect function
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Armada SoC family implementation of this SPI hardware module has
extended the configuration register to allow for a wider range of SPI
clock rates. Specifically the Serial Baud Rate Pre-selection bits in the
SPI Interface Configuration Register now also use bits 6 and 7 as well.
Modify the baud rate calculation to handle these differences for the
Armada case. Potentially a baud rate can be setup using a number of
different pre-scalar and scalar combinations. This code tries all
possible pre-scalar divisors (8 in total) to try and find the most
accurate set.
This change introduces (and documents) a new device tree compatible
device name "armada-370-spi" to support this.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The only use of "status" is to hold a value which is immediately returned,
so just return and remove the variable directly.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
default_restore_msi_irq() already has the struct msi_desc pointer required
by __write_msi_msg(), so call it directly instead of having write_msi_msg()
look it up from the IRQ.
No functional change.
[bhelgaas: split into separate patch]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
rtas_setup_msi_irqs() already has the struct msi_desc pointer required by
__read_msi_msg(), so call it directly instead of having read_msi_msg() look
it up from the IRQ.
No functional change.
[bhelgaas: changelog]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: linuxppc-dev@lists.ozlabs.org
|
|
Both callers of get_cached_msi_msg() start with a struct irq_data pointer,
look up the corresponding IRQ number, and pass it to get_cached_msi_msg(),
which then uses irq_get_irq_data() to look up the struct irq_data again to
call __get_cached_msi_msg().
Since we already have the struct irq_data, call __get_cached_msi_msg()
directly and skip the lookup work done by get_cached_msi_msg().
No functional change.
[bhelgaas: changelog]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Tony Luck <tony.luck@intel.com>
CC: linux-ia64@vger.kernel.org
|
|
The "msi_bus" sysfs file for bridges sets a bus flag to allow or disallow
future driver requests for MSI or MSI-X. Previously, the sysfs file
existed for endpoints but did nothing.
Add "msi_bus" support for endpoints, so an administrator can prevent the
use of MSI and MSI-X for individual devices.
Note that as for bridges, these changes only affect future driver requests
for MSI or MSI-X, so drivers may need to be reloaded.
Add documentation for the "msi_bus" sysfs file.
[bhelgaas: changelog, comments, add "subordinate", add endpoint printk,
rework bus_flags setting, make bus_flags printk unconditional]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
"msi_attrib.pos" is only used for MSI (not MSI-X), and we already cache the
MSI capability offset in "dev->msi_cap".
Remove "pos" from the struct msi_attrib and use "dev->msi_cap" directly.
[bhelgaas: changelog, fix whitespace]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After commit 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not
kobjects"), the kobject in struct msi_desc is unused.
Remove the unused struct kobject from struct msi_desc.
[bhelgaas: changelog]
Fixes: 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects")
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename pci_msi_check_device() to pci_msi_supported() for clarity. Note
that pci_msi_supported() returns true if MSI/MSI-X is supported, so code
like:
if (pci_msi_supported(...))
reads naturally.
[bhelgaas: changelog, split to separate patch, reverse sense]
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Both callers of pci_msi_check_device() check that the device is in D0
state, so move the check from the callers into pci_msi_check_device()
itself.
In pci_enable_msi_range(), note that pci_msi_check_device() never returns a
positive value any more, so the loop that called it until it returns zero
or negative is no longer necessary.
[bhelgaas: changelog, split to separate patch]
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
No architectures implement arch_msi_check_device() or the struct msi_chip
.check_device() method, so remove them.
Remove the "type" parameter to pci_msi_check_device() because it was only
used to call arch_msi_check_device() and is no longer needed.
[bhelgaas: changelog, split to separate patch]
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Move MSI checks from arch_msi_check_device() to arch_setup_msi_irqs().
This makes the code more compact and allows removing
arch_msi_check_device() from generic MSI code.
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
CC: Thomas Gleixner <tglx@linutronix.de>
|
|
Move MSI checks from arch_msi_check_device() to arch_setup_msi_irqs().
This makes the code more compact and allows removing
arch_msi_check_device() from generic MSI code.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Allow parent rate changes for i2s on rk3288
and rockchip as well as s3c24xx restart handlers.
|
|
[root@zoo ~]# perf record --filter "common_pid != PERF_PID" -a
-F option should follow a -e tracepoint option.
The -F option is for --freq, not --filter. Fix it up to show:
[root@zoo ~]# perf record --filter "common_pid != PERF_PID" -a
--filter option should follow a -e tracepoint option
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-z0yrm8stn9w3423nkov3eksg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Attempting to build the perf tool for an arm64 target results in the
following failure:
arch/arm64/util/unwind-libunwind.c: In function 'libunwind__arch_reg_id':
arch/arm64/util/unwind-libunwind.c:77:3: error: implicit declaration of function 'pr_err'
pr_err("unwind: invalid reg id %d\n", regnum);
^
arch/arm64/util/unwind-libunwind.c:77:3: error: nested extern declaration of 'pr_err'
This is due to commit 84f5d36f4866 ("perf tools: Move pr_* debug macros
into debug object") moving the pr_* macros into a new header file, but
failing to update architectures other than x86.
This patch adds the missing include, and fixes the build again.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1412076432-22045-1-git-send-email-will.deacon@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Proper CHECKSUM_COMPLETE support needs to adjust skb->csum
when we remove one header. Its done using skb_gro_postpull_rcsum()
In the case of IPv4, we know that the adjustment is not really needed,
because the checksum over IPv4 header is 0. Lets add a comment to
ease code comprehension and avoid copy/paste errors.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cxgbi_inet6addr_handler() can be called in interrupt context, so use rcu
protected list while finding netdev. This is observed as a scheduling in
atomic oops when running over ipv6.
Fixes: fc8d0590d914 ("libcxgbi: Add ipv6 api to driver")
Fixes: 759a0cc5a3e1 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api")
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
With workload that spawns and destroys many threads and processes, it
was found that perf-mem could took a long time to post-process the perf
data after the target workload had completed its operation.
The performance bottleneck was found to be the lookup and insertion of
the new DSO structures (thousands of them in this case).
In a dual-socket Ivy-Bridge E7-4890 v2 machine (30-core, 60-thread), the
perf profile below shows what perf was doing after the profiled AIM7
shared workload completed:
- 83.94% perf libc-2.11.3.so [.] __strcmp_sse42
- __strcmp_sse42
- 99.82% map__new
machine__process_mmap_event
perf_session_deliver_event
perf_session__process_event
__perf_session__process_events
cmd_record
cmd_mem
run_builtin
main
__libc_start_main
- 13.17% perf perf [.] __dsos__findnew
__dsos__findnew
map__new
machine__process_mmap_event
perf_session_deliver_event
perf_session__process_event
__perf_session__process_events
cmd_record
cmd_mem
run_builtin
main
__libc_start_main
So about 97% of CPU times were spent in the map__new() function trying
to insert new DSO entry into the DSO linked list. The whole
post-processing step took about 9 minutes.
The DSO structures are currently searched linearly. So the total
processing time will be proportional to n^2.
To overcome this performance problem, the DSO code is modified to also
put the DSO structures in a RB tree sorted by its long name in
additional to being in a simple linked list. With this change, the
processing time will become proportional to n*log(n) which will be much
quicker for large n. However, the short name will still be searched
using the old linear searching method. With that patch in place, the
same perf-mem post-processing step took less than 30 seconds to
complete.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Link: http://lkml.kernel.org/r/1412098575-27863-3-git-send-email-Waiman.Long@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.cz>
|
|
Signed type mismatches the ioctl structure, all extent calculations are
done on unsigned types.
Signed-off-by: David Sterba <dsterba@suse.cz>
|
|
We now have cb_to_delegation and to_delegation, which do the same thing
and are defined separately in different .c files. Move the
cb_to_delegation definition into a header file and eliminate the
redundant to_delegation definition.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
|
|
The wm8962 driver uses the input subsystem, but it is selected by
SND_SOC_FSL_ASOC_CARD, which can be built with CONFIG_INPUT disabled,
resulting in this link error:
ERROR: "input_event" [sound/soc/codecs/snd-soc-wm8962.ko] undefined!
ERROR: "input_register_device" [sound/soc/codecs/snd-soc-wm8962.ko] undefined!
ERROR: "devm_input_allocate_device" [sound/soc/codecs/snd-soc-wm8962.ko] undefined!
Do not force the selection of the codecs by SND_SOC_FSL_ASOC_CARD to avoid
such problem.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It turned out DMIC interface wasn't enabled/disabled runtime for active
DMIC route in the rt5640 codec driver anymore after commit
71d97a794301 ("ASoC: rt5640: Use the platform data for DMIC settings").
Since DMIC interface must be enabled explicitly either by passing platform
data to rt5640 codec driver or by calling new rt5640_dmic_enable() this
patch adds a DMI quirk flag that is used to conditionally enable DMIC
interface during sound card init time.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
|
|
There is no code enabling DMIC clock in systems that don't provide platform
data for rt5640 after commit 71d97a794301 ("ASoC: rt5640: Use the platform
data for DMIC settings").
I think it's worth to keep this static DMIC clock and alternative data pin
setting during probe time. For making possible to use DMIC from ACPI probed
machine (prior ACPI 5.1 with _DSD) this patch moves DMIC configuration to
new exported rt5640_dmic_enable() that machine drivers can call.
Please note, this patch moves DMIC configuration from i2c probe to codec
probe in case platform data for rt5640 is set.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the board is sent to suspend (deep sleep) the McASP context will be lost.
In case when suspend happens during active audio we need to save and restore
more registers, which was configured during hw_param times as well.
We need to add more config registers, AFIFO control registers and we also
need to save and restore the serializer configuration as well.
Since the number of serializers depends on the SoC we need to allocate the
memory for it based on the num_serializer for the given McASP instance.
With this patch the ongoing stream will resume after resuming from deep
sleep.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
