summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-24net: dsa: b53: serialize access to the ARL tableVladimir Oltean
The b53 driver performs non-atomic transactions to the ARL table when adding, deleting and reading FDB and MDB entries. Traditionally these were all serialized by the rtnl_lock(), but now it is possible that DSA calls ->port_fdb_add and ->port_fdb_del without holding that lock. So the driver must have its own serialization logic. Add a mutex and hold it from all entry points (->port_fdb_{add,del,dump}, ->port_mdb_{add,del}). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: mscc: ocelot: serialize access to the MAC tableVladimir Oltean
DSA would like to remove the rtnl_lock from its SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE handlers, and the felix driver uses the same MAC table functions as ocelot. This means that the MAC table functions will no longer be implicitly serialized with respect to each other by the rtnl_mutex, we need to add a dedicated lock in ocelot for the non-atomic operations of selecting a MAC table row, reading/writing what we want and polling for completion. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: dsa: sja1105: serialize access to the dynamic config interfaceVladimir Oltean
The sja1105 hardware seems as concurrent as can be, but when we create a background script that adds/removes a rain of FDB entries without the rtnl_mutex taken, then in parallel we do another operation like run 'bridge fdb show', we can notice these errors popping up: sja1105 spi2.0: port 2 failed to read back entry for 00:01:02:03:00:40 vid 0: -ENOENT sja1105 spi2.0: port 2 failed to add 00:01:02:03:00:40 vid 0 to fdb: -2 sja1105 spi2.0: port 2 failed to read back entry for 00:01:02:03:00:46 vid 0: -ENOENT sja1105 spi2.0: port 2 failed to add 00:01:02:03:00:46 vid 0 to fdb: -2 Luckily what is going on does not require a major rework in the driver. The sja1105_dynamic_config_read() function sends multiple SPI buffers to the peripheral until the operation completes. We should not do anything until the hardware clears the VALID bit. But since there is no locking (i.e. right now we are implicitly serialized by the rtnl_mutex, but if we remove that), it might be possible that the process which performs the dynamic config read is preempted and another one performs a dynamic config write. What will happen in that case is that sja1105_dynamic_config_read(), when it resumes, expects to see VALIDENT set for the entry it reads back. But it won't. This can be corrected by introducing a mutex for serializing SPI accesses to the dynamic config interface which should be atomic with respect to each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: dsa: sja1105: wait for dynamic config command completion on writes tooVladimir Oltean
The hardware manual says that software should attempt a new dynamic config access (be it a a write or a read-back) only while the VALID bit is cleared. The VALID bit is set by software to 1, and it remains set as long as the hardware is still processing the request. Currently the driver only polls for the command completion only for reads, because that's when we need the actual data read back. Writes have been more or less "asynchronous", although this has never been an observable issue. This change makes sja1105_dynamic_config_write poll the VALID bit as well, to absolutely ensure that a follow-up access to the static config finds the VALID bit cleared. So VALID means "work in progress", while VALIDENT means "entry being read is valid". On reads we check the VALIDENT bit too, while on writes that bit is not always defined. So we need to factor it out of the loop, and make the loop provide back the unpacked command structure, so that sja1105_dynamic_config_read can check the VALIDENT bit. The change also attempts to convert the open-coded loop to use the read_poll_timeout macro, since I know this will come up during review. It's more code, but hey, it uses read_poll_timeout! Tested on SJA1105T, SJA1105S, SJA1110A. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: macb: Use mdio child node for MDIO bus if it existsSean Anderson
This allows explicitly specifying which children are present on the mdio bus. Additionally, it allows for non-phy MDIO devices on the bus. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24dt-bindings: net: macb: Add mdio bus child nodeSean Anderson
This adds an optional mdio bus child node. If present, the mac will look for PHYs there instead of directly under the top-level node. This eliminates any ambiguity about whether child nodes are PHYs, and allows the MDIO bus to contain non-PHY devices. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: bcmgenet: Add support for 7712 16nm internal EPHYFlorian Fainelli
The 16nm internal EPHY that is present in 7712 is actually a 16nm Gigabit PHY which has been forced to operate in 10/100 mode. Its controls are therefore via the EXT_GPHY_CTRL registers and not via the EXT_EPHY_CTRL which are used for all GENETv5 adapters. Add a match on the 7712 compatible string to allow that differentiation to happen. On previous GENETv4 chips the EXT_CFG_IDDQ_GLOBAL_PWR bit was cleared by default, but this is not the case with this chip, so we need to make sure we clear it to power on the EPHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24dt-bindings: net: bcmgenet: Document 7712 bindingFlorian Fainelli
7712 includes a GENETv5 adapter with an on-chip 10/100 16nm Ethernet PHY which requires us to document that controller's integration specifically for proper driver keying. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: phy: bcm7xxx: Add EPHY entry for 7712Florian Fainelli
7712 is a 16nm process SoC with a 10/100 integrated Ethernet PHY, utilize the recently defined 16nm EPHY macro to configure that PHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: Convert more users of mdiobus_* to mdiodev_*Sean Anderson
This converts users of mdiobus to mdiodev using the following semantic patch: @@ identifier mdiodev; expression regnum; @@ - mdiobus_read(mdiodev->bus, mdiodev->addr, regnum) + mdiodev_read(mdiodev, regnum) @@ identifier mdiodev; expression regnum, val; @@ - mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val) + mdiodev_write(mdiodev, regnum, val) Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: phylink: Convert some users of mdiobus_* to mdiodev_*Sean Anderson
This refactors the phylink pcs helper functions to use mdiobus_* instead of mdiodev_*. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: mdio: Add helper functions for accessing MDIO devicesSean Anderson
This adds some helpers for accessing non-phy MDIO devices. They are analogous to phy_(read|write|modify), except that they take an mdio_device and not a phy_device. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix dma allocation failure by using ↵Yuiko Oshino
dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume failsYuiko Oshino
The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24octeontx2-af: Increase number of reserved entries in KPUKiran Kumar K
With current KPU profile, we have 2 reserved entries which can be loaded from firmware to parse custom headers. Adding changes to increase these reserved entries to 6. And also removed KPU entries for unused LTYPEs like NPC_LT_LA_IH_8_ETHER, NPC_LT_LA_IH_4_ETHER, NPC_LT_LA_IH_2_ETHER Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-23mt76: connac: fix unresolved symbols when CONFIG_PM is unsetFelix Fietkau
mt76_connac_mcu_reg_* functions are always needed by connac based drivers Fixes: 87f9bf24ea84 ("mt76: connac: move mcu reg access utility routines in mt76_connac_lib module") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: Make use of the helper macro kthread_run()Cai Huoqing
Repalce kthread_create/wake_up_process() with kthread_run() to simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: Print error message when reading EEPROM from mtd failedHauke Mehrtens
When the EEPROM data is stored on a MTD partition print an error message when reading this MTD partition failed. This is currently happening often in OpenWrt because the initial data was written with using a flash driver which ignores the error detection data and now OpenWrt uses a driver which checks it. With this patch a better error message is shown: [ 8.986988] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20201105222323 [ 9.100508] mt7915e 0000:01:00.0: reading EEPROM from mtd factory failed: -117 [ 9.144289] mt7915e: probe of 0000:01:00.0 failed with error -22 mt7915 does not work without an EEPROM, MT7922 still works. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7921: disable 4addr capabilityLorenzo Bianconi
4addr is not supported by the driver/firmware yet Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add debugfs knobs for MCU utilizationShayne Chen
Add debugfs knobs to read MCU utilization, which helps user know firmware status more easily to narrow down CPU bottleneck issues. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add WA firmware log supportShayne Chen
Support to turn on/off WA firmware log from debugfs. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: fix endiannes warning mt7915_mcu_beacon_check_capsLorenzo Bianconi
Fix the following sparse warning mt7915_mcu_beacon_check_caps routine: warning: cast to restricted __le32 warning: cast from restricted __le16 Fixes: 22dffbddf0167 ("mt76: mt7915: introduce mt7915_mcu_beacon_check_caps()") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework debugfs fixed-rate knobRyder Lee
Switch to use new mt7915_mcu_set_fixed_rate_ctrl(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework .set_bitrate_mask() to support more optionsRyder Lee
With this patch, driver can support single rate, (HE)GI and HE_LTF configuration through .set_bitrate_mask(). Tested-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: remove mt7915_mcu_add_he()Ryder Lee
Make mt7915_mcu_sta_he_tlv() as a part of mt7915_mcu_add_rate_ctrl() as firmware rate control should get HE rate information from sta_rec_he, and reduce a global function accordingly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7615: apply cached RF data for DBDCRyder Lee
Band0 and band1 share the same hardware, so band0 will stop Tx/Rx when band1 performs Rx calibration. cal_cache is introduced to solve such corner cases by moving necessary datas from channel_switch to bootup. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7615: mt7622: fix ibss and meshpointNick Hainke
commit 7f4b7920318b ("mt76: mt7615: add ibss support") introduced IBSS and commit f4ec7fdf7f83 ("mt76: mt7615: enable support for mesh") meshpoint support. Both used in the "get_omac_idx"-function: if (~mask & BIT(HW_BSSID_0)) return HW_BSSID_0; With commit d8d59f66d136 ("mt76: mt7615: support 16 interfaces") the ibss and meshpoint mode should "prefer hw bssid slot 1-3". However, with that change the ibss or meshpoint mode will not send any beacon on the mt7622 wifi anymore. Devices were still able to exchange data but only if a bssid already existed. Two mt7622 devices will never be able to communicate. This commits reverts the preferation of slot 1-3 for ibss and meshpoint. Only NL80211_IFTYPE_STATION will still prefer slot 1-3. Tested on Banana Pi R64. Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces") Signed-off-by: Nick Hainke <vincent@systemli.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211007225725.2615-1-vincent@systemli.org
2021-10-23mt76: mt7921: fix Wformat build warningRandy Dunlap
ARRAY_SIZE() is of type size_t, so the format specfier should be %zu instead of %lu. Fixes this build warning: ../drivers/net/wireless/mediatek/mt76/mt7921/main.c: In function ‘mt7921_get_et_stats’: ../drivers/net/wireless/mediatek/mt76/mt7921/main.c:1024:26: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘unsigned int’ [-Wformat=] dev_err(dev->mt76.dev, "ei: %d SSTATS_LEN: %lu", Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sean Wang <sean.wang@mediatek.com> Cc: linux-wireless@vger.kernel.org Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211022233251.29987-1-rdunlap@infradead.org
2021-10-23mt76: mt7921: fix mt7921s KconfigLorenzo Bianconi
Add missing MMC dependency in mt7921s Kconfig: ld: drivers/net/wireless/mediatek/mt76/sdio.o: in function `mt76s_rr': sdio.c:(.text+0x1263): undefined reference to `sdio_claim_host' ld: sdio.c:(.text+0x1278): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x12c8): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x1327): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x134d): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x138c): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x140f): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x1498): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x14e5): undefined reference to `sdio_release_host' ld: drivers/net/wireless/mediatek/mt76/sdio.o: in function `mt76s_wr': sdio.c:(.text+0x1599): undefined reference to `sdio_claim_host' ld: sdio.c:(.text+0x15ae): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x15f9): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x1646): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x16a5): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x16cb): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x170a): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x1782): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x17e9): undefined reference to `sdio_release_host' Fixes: 48fab5bbef409 ("mt76: mt7921: introduce mt7921s support") Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1ce6cb04ba1ab5aabd2b06b45fd8266537ef5359.1634893214.git.lorenzo@kernel.org
2021-10-22Merge tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Fix for the cgroup code not ussing irq safe stats updates, and one fix for an error handling condition in add_partition()" * tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-block: block: fix incorrect references to disk objects blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on blkg->iostat_cpu
2021-10-22Merge tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Two fixes for the max workers limit API that was introduced this series: one fix for an issue with that code, and one fixing a linked timeout regression in this series" * tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block: io_uring: apply worker limits to previous users io_uring: fix ltimeout unprep io_uring: apply max_workers limit to all future users io-wq: max_worker fixes
2021-10-22cgroup: Fix memory leak caused by missing cgroup_bpf_offlineQuanyang Wang
When enabling CONFIG_CGROUP_BPF, kmemleak can be observed by running the command as below: $mount -t cgroup -o none,name=foo cgroup cgroup/ $umount cgroup/ unreferenced object 0xc3585c40 (size 64): comm "mount", pid 425, jiffies 4294959825 (age 31.990s) hex dump (first 32 bytes): 01 00 00 80 84 8c 28 c0 00 00 00 00 00 00 00 00 ......(......... 00 00 00 00 00 00 00 00 6c 43 a0 c3 00 00 00 00 ........lC...... backtrace: [<e95a2f9e>] cgroup_bpf_inherit+0x44/0x24c [<1f03679c>] cgroup_setup_root+0x174/0x37c [<ed4b0ac5>] cgroup1_get_tree+0x2c0/0x4a0 [<f85b12fd>] vfs_get_tree+0x24/0x108 [<f55aec5c>] path_mount+0x384/0x988 [<e2d5e9cd>] do_mount+0x64/0x9c [<208c9cfe>] sys_mount+0xfc/0x1f4 [<06dd06e0>] ret_fast_syscall+0x0/0x48 [<a8308cb3>] 0xbeb4daa8 This is because that since the commit 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") root_cgrp->bpf.refcnt.data is allocated by the function percpu_ref_init in cgroup_bpf_inherit which is called by cgroup_setup_root when mounting, but not freed along with root_cgrp when umounting. Adding cgroup_bpf_offline which calls percpu_ref_kill to cgroup_kill_sb can free root_cgrp->bpf.refcnt.data in umount path. This patch also fixes the commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself"). A cgroup_bpf_offline is needed to do a cleanup that frees the resources which are allocated by cgroup_bpf_inherit in cgroup_setup_root. And inside cgroup_bpf_offline, cgroup_get() is at the beginning and cgroup_put is at the end of cgroup_bpf_release which is called by cgroup_bpf_offline. So cgroup_bpf_offline can keep the balance of cgroup's refcount. Fixes: 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211018075623.26884-1-quanyang.wang@windriver.com
2021-10-22bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch()Xu Kuohai
1. The ufd in generic_map_update_batch() should be read from batch.map_fd; 2. A call to fdget() should be followed by a symmetric call to fdput(). Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211019032934.1210517-1-xukuohai@huawei.com
2021-10-22Merge branch 'Fix up bpf_jit_limit some more'Alexei Starovoitov
Lorenz Bauer says: ==================== Fix some inconsistencies of bpf_jit_limit on non-x86 platforms. I've dropped exposing bpf_jit_current since we couldn't agree on file modes, correct names, etc. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-10-22bpf: Prevent increasing bpf_jit_limit above maxLorenz Bauer
Restrict bpf_jit_limit to the maximum supported by the arch's JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-4-lmb@cloudflare.com
2021-10-22bpf: Define bpf_jit_alloc_exec_limit for arm64 JITLorenz Bauer
Expose the maximum amount of useable memory from the arm64 JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-3-lmb@cloudflare.com
2021-10-22bpf: Define bpf_jit_alloc_exec_limit for riscv JITLorenz Bauer
Expose the maximum amount of useable memory from the riscv JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Luke Nelson <luke.r.nels@gmail.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-2-lmb@cloudflare.com
2021-10-22Merge branch 'delete-impossible-devlink-notifications'Jakub Kicinski
Leon Romanovsky says: ==================== Delete impossible devlink notifications This series is a followup to the delayed devlink notification scheme. I removed the impossible notifications together with attempt to annotate various calls in order to mark them as pre/post devlink_register(). Other notifications are called before and after delvink_register() so they weren't changed in this pathcset. ==================== Link: https://lore.kernel.org/r/cover.1634825474.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22devlink: Clean not-executed param notificationsLeon Romanovsky
The parameters are registered before devlink_register() and all the notifications are delayed. This patch removes not-possible parameters notifications along with addition of code annotation logic. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22devlink: Remove not-executed trap group notificationsLeon Romanovsky
The trap logic is registered before devlink_register() and all the notifications are delayed. This patch removes not-possible trap group notifications along with addition of code annotation logic. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22devlink: Remove not-executed trap policer notificationsLeon Romanovsky
The trap policer logic is registered before devlink_register() and all the notifications are delayed. This patch removes not-possible notifications along with addition of code annotation logic. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22devlink: Delete obsolete parameters publish APILeon Romanovsky
The change of devlink_register() to be last devlink command together with delayed notification logic made the publish API to be obsolete. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22gre/sit: Don't generate link-local addr if addr_gen_mode is ↵Stephen Suryaputra
IN6_ADDR_GEN_MODE_NONE When addr_gen_mode is set to IN6_ADDR_GEN_MODE_NONE, the link-local addr should not be generated. But it isn't the case for GRE (as well as GRE6) and SIT tunnels. Make it so that tunnels consider the addr_gen_mode, especially for IN6_ADDR_GEN_MODE_NONE. Do this in add_v4_addrs() to cover both GRE and SIT only if the addr scope is link. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Antonio Quartulli <a@unstable.cc> Link: https://lore.kernel.org/r/20211020200618.467342-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: dsa: sja1105: Add of_node_put() before returnWan Jiabing
Fix following coccicheck warning: ./drivers/net/dsa/sja1105/sja1105_main.c:1193:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before return. Early exits from for_each_available_child_of_node should decrement the node reference counter. Fixes: 9ca482a246f0 ("net: dsa: sja1105: parse {rx, tx}-internal-delay-ps properties for RGMII delays") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211021094606.7118-1-wanjiabing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22fcnal-test: kill hanging ping/nettest binaries on cleanupFlorian Westphal
On my box I see a bunch of ping/nettest processes hanging around after fcntal-test.sh is done. Clean those up before netns deletion. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211021140247.29691-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22Merge tag 'fuse-fixes-5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Syzbot discovered a race in case of reusing the fuse sb (introduced in this cycle). Fix it by doing the s_fs_info initialization at the proper place" * tag 'fuse-fixes-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: clean up error exits in fuse_fill_super() fuse: always initialize sb->s_fs_info fuse: clean up fuse_mount destruction fuse: get rid of fuse_put_super() fuse: check s_root when destroying sb
2021-10-22Merge tag 'hyperv-fixes-signed-20211022' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyper-v fix from Wei Liu: - Fix vmbus ARM64 build (Arnd Bergmann) * tag 'hyperv-fixes-signed-20211022' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyperv/vmbus: include linux/bitops.h
2021-10-22Merge branch 'sctp-enhancements-for-the-verification-tag'Jakub Kicinski
Xin Long says: ==================== sctp: enhancements for the verification tag This patchset is to address CVE-2021-3772: A flaw was found in the Linux SCTP stack. A blind attacker may be able to kill an existing SCTP association through invalid chunks if the attacker knows the IP-addresses and port numbers being used and the attacker can send packets with spoofed IP addresses. This is caused by the missing VTAG verification for the received chunks and the incorrect vtag for the ABORT used to reply to these invalid chunks. This patchset is to go over all processing functions for the received chunks and do: 1. Make sure sctp_vtag_verify() is called firstly to verify the vtag from the received chunk and discard this chunk if it fails. With some exceptions: a. sctp_sf_do_5_1B_init()/5_2_2_dupinit()/9_2_reshutack(), processing INIT chunk, as sctphdr vtag is always 0 in INIT chunk. b. sctp_sf_do_5_2_4_dupcook(), processing dupicate COOKIE_ECHO chunk, as the vtag verification will be done by sctp_tietags_compare() and then it takes right actions according to the return. c. sctp_sf_shut_8_4_5(), processing SHUTDOWN_ACK chunk for cookie_wait and cookie_echoed state, as RFC demand sending a SHUTDOWN_COMPLETE even if the vtag verification failed. d. sctp_sf_ootb(), called in many types of chunks for closed state or no asoc, as the same reason to c. 2. Always use the vtag from the received INIT chunk to make the response ABORT in sctp_ootb_pkt_new(). 3. Fix the order for some checks and add some missing checks for the received chunk. This patch series has been tested with SCTP TAHI testing to make sure no regression caused on protocol conformance. ==================== Link: https://lore.kernel.org/r/cover.1634730082.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22sctp: add vtag check in sctp_sf_ootbXin Long
sctp_sf_ootb() is called when processing DATA chunk in closed state, and many other places are also using it. The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc. When fails to verify the vtag from the chunk, this patch sets asoc to NULL, so that the abort will be made with the vtag from the received chunk later. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22sctp: add vtag check in sctp_sf_do_8_5_1_E_saXin Long
sctp_sf_do_8_5_1_E_sa() is called when processing SHUTDOWN_ACK chunk in cookie_wait and cookie_echoed state. The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc. Note that when fails to verify the vtag from SHUTDOWN-ACK chunk, SHUTDOWN COMPLETE message will still be sent back to peer, but with the vtag from SHUTDOWN-ACK chunk, as said in 5) of rfc4960#section-8.4. While at it, also remove the unnecessary chunk length check from sctp_sf_shut_8_4_5(), as it's already done in both places where it calls sctp_sf_shut_8_4_5(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 20:20:17 +0000