| Age | Commit message (Collapse) | Author |
|---|
|
Bareudp reads the inner IP header to get the ECN value. Therefore, it
needs to ensure that it's part of the skb's linear data.
This is similar to the vxlan and geneve fixes for that same problem:
* commit f7789419137b ("vxlan: Pull inner IP header in vxlan_rcv().")
* commit 1ca1ba465e55 ("geneve: make sure to pull inner header in
geneve_rx()")
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Justin sent a patch to use strscpy_pad() instead of strncpy()
on the name field. Simon rightly asked why the _pad() version
is used, and looking closer name seems completely unused,
the last code which referred to it was removed in
commit 8391c4aab1aa ("caif: Bugfixes in CAIF netdevice for close and flow control")
Link: https://lore.kernel.org/20240909-strncpy-net-caif-chnl_net-c-v1-1-438eb870c155@google.com
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Justin Stitt <justinstitt@google.com>
Link: https://patch.msgid.link/20240911015228.1555779-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The uAPI headers for IPX were deleted 3 years ago in
commit 6c9b40844751 ("net: Remove net/ipx.h and uapi/linux/ipx.h header files")
Delete the leftover defines from libc-compat.h
Link: https://patch.msgid.link/20240911002142.1508694-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-09-11
We've added 12 non-merge commits during the last 16 day(s) which contain
a total of 20 files changed, 228 insertions(+), 30 deletions(-).
There's a minor merge conflict in drivers/net/netkit.c:
00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to dev->lltx")
d96608794889 ("netkit: Disable netpoll support")
The main changes are:
1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used
to easily parse skbs in BPF programs attached to tracepoints,
from Philo Lu.
2) Add a cond_resched() point in BPF's sock_hash_free() as there have
been several syzbot soft lockup reports recently, from Eric Dumazet.
3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which
got noticed when zero copy ice driver started to use it,
from Maciej Fijalkowski.
4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs
up via netif_receive_skb_list() to better measure latencies,
from Daniel Xu.
5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann.
6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but
instead gather the actual value via /proc/sys/net/core/max_skb_frags,
also from Maciej Fijalkowski.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
sock_map: Add a cond_resched() in sock_hash_free()
selftests/bpf: Expand skb dynptr selftests for tp_btf
bpf: Allow bpf_dynptr_from_skb() for tp_btf
tcp: Use skb__nullable in trace_tcp_send_reset
selftests/bpf: Add test for __nullable suffix in tp_btf
bpf: Support __nullable argument suffix for tp_btf
bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv
selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob
xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc()
tcp_bpf: Remove an unused parameter for bpf_tcp_ingress()
bpf, sockmap: Correct spelling skmsg.c
netkit: Disable netpoll support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://patch.msgid.link/20240911211525.13834-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Prevent a possible int overflow in wq offsets [guc] (Nikita Zhandarovich)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZuKTN2XngNhBB3z3@linux
|
|
Add a LIBBPF_API function to retrieve the token_fd from a bpf_object.
Without this accessor, if user needs a token FD they have to get it
manually via bpf_token_create, even though a token might have been
already created by bpf_object__load.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240913001858.3345583-1-ihor.solodrai@pm.me
|
|
Willem de Bruijn says:
====================
selftests/net: packetdrill: netns and two imports
From: Willem de Bruijn <willemb@google.com>
1/3: run in nets, as discussed, and add missing CONFIGs
2/3: import tcp/zerocopy
3/3: import tcp/slow_start
====================
Link: https://patch.msgid.link/20240912005317.1253001-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Same import process as previous tests.
Also add CONFIG_NET_SCH_FQ to config, as one test uses that.
Same test process as previous tests. Both with and without debug mode.
Recording the steps once:
make mrproper
vng --build \
--config tools/testing/selftests/net/packetdrill/config \
--config kernel/configs/debug.config
vng -v --run . --user root --cpus 4 -- \
make -C tools/testing/selftests TARGETS=net/packetdrill run_tests
Link: https://github.com/linux-netdev/nipa/wiki/How-to-run-netdev-selftests-CI-style#how-to-build
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240912005317.1253001-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Same as initial tests, import verbatim from
github.com/google/packetdrill, aside from:
- update `source ./defaults.sh` path to adjust for flat dir
- add SPDX headers
- remove author statements if any
- drop blank lines at EOF (new)
Also import set_sysctls.py, which many scripts depend on to set
sysctls and then restore them later. This is no longer strictly needed
for namespacified sysctl. But not all sysctls are namespacified, and
doesn't hurt if they are.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240912005317.1253001-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Run packetdrill tests inside netns.
They may change system settings, such as sysctl.
Also expand config with a few more needed CONFIGs.
Link: https://lore.kernel.org/netdev/20240910152640.429920be@kernel.org/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240912005317.1253001-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.11-2024-09-11:
amdgpu:
- Avoid races between set_drr() functions and dc_state_destruct()
- Fix regerssion related to zpos
- Fix regression related to overlay cursor
- SMU 14.x updates
- JPEG fixes
- Silence an UBSAN warning
amdkfd:
- Fetch cacheline size from IP discovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911170528.838655-1-alexander.deucher@amd.com
|
|
David Arinzon says:
====================
ENA driver metrics changes
This patchset contains an introduction of new metrics
available to ENA users.
====================
Link: https://patch.msgid.link/20240909084704.13856-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENA currently supports the following customer metrics:
- `bw_in_allowance_exceeded`
- `bw_out_allowance_exceeded`
- `conntrack_allowance_exceeded`
- `linklocal_allowance_exceeded`
- `pps_allowance_exceeded`
This patch adds a new metric named:
`conntrack_allowance_available`.
Information about these metrics is available in [1].
In addition, the interface between the driver and the
device has been upgraded to allow more flexibility and
expendability to additional metrics in the future.
[1]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-network-performance-ena.html#network-performance-metrics
Signed-off-by: Ron Beider <rbeider@amazon.com>
Signed-off-by: Shahar Itzko <itzko@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20240909084704.13856-3-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENA Express metrics, called `ena_srd` are exposed to
customers via `ethtool`.
The metrics allow customers to check the configuration
(mode), tx/rx counters as well as resource utilization.
The documentation is also updated to provide a general
explanation about ENA Express as well as links for further
information about metrics and configurations.
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20240909084704.13856-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the calculation of packet signatures by adding the offset into a page
in the read or write data payload when hashing the pages from it.
Fixes: 39bc58203f04 ("cifs: Add a function to Hash the contents of an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One build fix for 32-bit arches using the Qualcomm PLL driver. It's
cheaper to use a comparison here instead of a division so we just do
that to fix the build"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: clk-alpha-pll: Simplify the zonda_pll_adjust_l_val()
|
|
This error path was missed when converting away from
xe_display_pm_resume with second argument.
Fixes: 66a0f6b9f5fc ("drm/xe/display: handle HPD polling in display runtime suspend/resume")
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905150052.174895-2-maarten.lankhorst@linux.intel.com
(cherry picked from commit 474f64cb988a410db8a0b779d6afdaa2a7fc5759)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Wa_15016589081 applies to xe2_hpg renderCS
V2(Gustavo)
- rename bit macro
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904101333.2049655-1-tejas.upadhyay@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 9db969b36b2fbca13ad4088aff725ebd5e8142f5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When we fail to map a BO in the GGTT, we release our GGTT node
placeholder, but leave stale bo->ggtt_node pointer to it, which
triggers an assert immediately followed by a crash, due to UAF:
[ ] xe 0000:00:02.0: [drm] Assertion `bo->ggtt_node->base.size == bo->size` failed!
[ ] WARNING: CPU: 4 PID: 126 at drivers/gpu/drm/xe/xe_ggtt.c:689 xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] RIP: 0010:xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] ? __warn+0x88/0x190
[ ] ? xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] ? report_bug+0x1c3/0x1d0
[ ] ? handle_bug+0x42/0x70
[ ] ? exc_invalid_op+0x14/0x70
[ ] ? asm_exc_invalid_op+0x16/0x20
[ ] ? xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] ? xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] xe_ttm_bo_destroy+0x11f/0x260 [xe]
[ ] ? ttm_bo_release+0x31c/0x350 [ttm]
[ ] ? __mutex_unlock_slowpath+0x35/0x270
[ ] __xe_bo_create_locked+0x4a0/0x550 [xe]
[ ] ? mark_held_locks+0x49/0x80
[ ] xe_bo_create_pin_map_at+0x37/0x200 [xe]
[ ] xe_bo_create_pin_map+0x11/0x20 [xe]
While around, for similar reason, also don't keep an error pointer
if we fail to allocate ggtt_node placeholder.
Fixes: 34e804220f69 ("drm/xe: Make xe_ggtt_node struct independent")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906220348.1836-1-michal.wajdeczko@intel.com
(cherry picked from commit f2710d95724ebbfa35d6d4b82017eeab70994509)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Fix memleak caused by missing xe_vm_put
Fixes: 852856e3b6f6 ("drm/xe: Use reserved copy engine for user binds on faulting devices")
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240901044227.1177211-1-dhirschfeld@habana.ai
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 249df8cbecf0ab4877eab66cae857748631831a9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The 'runtime_status' field is an implementation detail of the
power management code, so a device driver should not normally
touch this:
drivers/gpu/drm/xe/xe_pm.c: In function 'xe_pm_suspending_or_resuming':
drivers/gpu/drm/xe/xe_pm.c:606:26: error: 'struct dev_pm_info' has no member named 'runtime_status'
606 | return dev->power.runtime_status == RPM_SUSPENDING ||
| ^
drivers/gpu/drm/xe/xe_pm.c:607:27: error: 'struct dev_pm_info' has no member named 'runtime_status'
607 | dev->power.runtime_status == RPM_RESUMING;
| ^
drivers/gpu/drm/xe/xe_pm.c:608:1: error: control reaches end of non-void function [-Werror=return-type]
Add an #ifdef check to avoid the build regression.
Fixes: ad92f5231261 ("drm/xe: Suppress missing outer rpm protection warning")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909202521.1018439-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 1c129ed07de47684ff2471e32b52fa823533aa06)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Pull block fix from Jens Axboe:
"Just a single fix for a deadlock issue that can happen if someone
attempts to change the root disk IO scheduler with a module that
requires loading from disk.
Changing the scheduler freezes the queue while that operation is
happening, hence causing a deadlock"
* tag 'block-6.11-20240912' of git://git.kernel.dk/linux:
block: Prevent deadlocks when switching elevators
|
|
Fix driver not allocating memory for struct btintel_data which is used
to store internal data.
Fixes: 6e65a09f9275 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
- Fix clearing status register bits for chips supporting older
PMBus versions
* tag 'hwmon-for-v6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus) Conditionally clear individual status bits for pmbus rev >= 1.2
|
|
Instead of custom approach this allows to print escaped strings
via %*pE extension. With this the unknown ID will be printed
as a string. Nonetheless, leave hex values to be printed as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20240911201903.2886874-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20240911194627.2885506-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"A fix for a NULL worker->pool deref bug which can be triggered when a
worker is created and then destroyed immediately"
* tag 'wq-for-6.11-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Clear worker->pool in the worker thread context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Two fixes for smp_processor_id() calls in preemptible sections: one
if the perf driver, and one in the fence.i prctl.
* tag 'riscv-for-linus-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Disable preemption while handling PR_RISCV_CTX_SW_FENCEI_OFF
drivers: perf: Fix smp_processor_id() use in preemptible code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
There is a recently notified BT regression with no fix yet. I do not
think a fix will land in the next week.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in
nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock"
* tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
net: libwx: fix number of Rx and Tx descriptors
net: dsa: felix: ignore pending status of TAS module when it's disabled
net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
selftests: mptcp: include net_helper.sh file
selftests: mptcp: include lib.sh file
selftests: mptcp: join: restrict fullmesh endp on 1st sf
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER
dt-bindings: net: tja11xx: fix the broken binding
selftests: net: csum: Fix checksums for packets with non-zero padding
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
virtio_net: disable premapped mode by default
Revert "virtio_net: big mode skip the unmap check"
Revert "virtio_net: rx remove premapped failover code"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-wmi: Disable OOBE that interferes with backlight control
- panasonic-laptop: Two fixes to SINF array handling
* tag 'platform-drivers-x86-v6.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Disable OOBE experience on Zenbook S 16
platform/x86: panasonic-laptop: Allocate 1 entry extra in the sinf array
platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
|
|
As Jann points out, PFN mappings are special, because unlike normal
memory mappings, there is no lifetime information associated with the
mapping - it is just a raw mapping of PFNs with no reference counting of
a 'struct page'.
That's all very much intentional, but it does mean that it's easy to
mess up the cleanup in case of errors. Yes, a failed mmap() will always
eventually clean up any partial mappings, but without any explicit
lifetime in the page table mapping itself, it's very easy to do the
error handling in the wrong order.
In particular, it's easy to mistakenly free the physical backing store
before the page tables are actually cleaned up and (temporarily) have
stale dangling PTE entries.
To make this situation less error-prone, just make sure that any partial
pfn mapping is torn down early, before any other error handling.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Cleanup from Brent Lu and add HDMI-In capture supports from Balamurugan C.
|
|
Do not raise a WARN if we are likely within suspending or resuming
path. This is likely this false positive:
rpm_status: 0000:03:00.0 status=RPM_SUSPENDING
console: xe_bo_evict_all (called from suspend)
xe_sched_job_create: dev=0000:03:00.0, ...
xe_sched_job_exec: dev=0000:03:00.0, ...
xe_pm_runtime_put: dev=0000:03:00.0, ...
xe_sched_job_run: dev=0000:03:00.0, ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
console: xe 0000:03:00.0: [drm] Missing outer runtime
PM protection
console: xe_guc_ct_send+0x15/0x50 [xe]
console: guc_exec_queue_run_job+0x1509/0x3950 [xe]
[snip]
console: drm_sched_run_job_work+0x649/0xc20
At this point, BOs are getting evicted from VRAM with rpm
usage-counter = 2, but rpm status = SUSPENDING.
The xe->pm_callback_task won't be equal 'current' because this call is
coming from a work queue.
So, pm_runtime_get_if_active() will be called and return 0 because rpm
status != ACTIVE (but equal SUSPENDING or RESUMING).
v2: Still get the reference even on non suspending/resuming
path (Jonathan, Brost).
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905140215.56404-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit cb85e39dc5d1717fab82810984cce0e54712a3c2)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Update the table of program types in the libbpf documentation with the
recently added program types.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240912095944.6386-1-donald.hunter@gmail.com
|
|
The node ptr can point to an already freed ptr, if we hit the path with
an already allocated node. We later dereference that pointer with:
xe_gt_assert(gt, !xe_ggtt_node_allocated(node));
which is a potential UAF. Fix this by not stashing the ptr for node.
Also since it is likely a bad idea to leave config->ggtt_region pointing
to a stale ptr, also set that to NULL by calling
pf_release_vf_config_ggtt() instead of pf_release_ggtt().
Fixes: 34e804220f69 ("drm/xe: Make xe_ggtt_node struct independent")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828104341.180111-2-matthew.auld@intel.com
(cherry picked from commit 89076b5a8b4e0a01040585e156a0b014cd472fd3)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
In the function mt7986_afe_pcm_dev_probe, when get irq
failed, the function platform_get_irq() logs an error
message, so remove redundant one here.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240912084110.1854-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Requesting transfers of the exact same size of wMaxPacketSize may result
in ZPL/short-transfer since the USB stack cannot handle it as we are
limiting the buffer size to be the same as wMaxPacketSize.
Also, in terms of throughput this change has the same effect to
interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput
by increasing the frame size" had for the bulk endpoint, so users of the
advertisement bearer (e.g. BT Mesh) may benefit from this change.
Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
|
|
Add 2 USB HW IDs for MT7925 (0xe118/e) to ensure proper recognition.
These HW IDs are extracted from Windows driver inf file:
https://dlcdnets.asus.com/pub/ASUS/nb/Image/Driver/Bluetooth/39389/Bluetooth_DCH_MediaTek_B_V1.1037.0.433Sub2_39389.exe?model=H7606WV
Patch has been tested successfully on an Asus ProArt P16 model H7606WV.
Controller is recognized devices pair successfully.
Signed-off-by: Michael Burch <me@michaelburch.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
CYW4373 devices soldered onto the PCB (non-removable),
use a UART connection for Bluetooth and the advertised btsdio
support as an SDIO function should be ignored.
Signed-off-by: Scott Ehlert <ehlert@battelle.org>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Buffers can get registered with io_uring, which allows to skip the
repeated pin_pages, unpin/unref pages for each O_DIRECT operation. This
reduces the overhead of O_DIRECT IO.
However, registrering buffers can take some time. Normally this isn't an
issue as it's done at initialization time (and hence less critical), but
for cases where rings can be created and destroyed as part of an IO
thread pool, registering the same buffers for multiple rings become a
more time sensitive proposition. As an example, let's say an application
has an IO memory pool of 500G. Initial registration takes:
Got 500 huge pages (each 1024MB)
Registered 500 pages in 409 msec
or about 0.4 seconds. If we go higher to 900 1GB huge pages being
registered:
Registered 900 pages in 738 msec
which is, as expected, a fully linear scaling.
Rather than have each ring pin/map/register the same buffer pool,
provide an io_uring_register(2) opcode to simply duplicate the buffers
that are registered with another ring. Adding the same 900GB of
registered buffers to the target ring can then be accomplished in:
Copied 900 pages in 17 usec
While timing differs a bit, this provides around a 25,000-40,000x
speedup for this use case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Can be done in one of two ways:
1) Regular file descriptor, just fget()
2) Registered ring, index our own table for that
In preparation for adding another register use of needing to get a ctx
from a file descriptor, abstract out this helper and use it in the main
register syscall as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Adds test suite for integer based power function which performs integer
exponentiation.
The test suite is designed to verify that the implementation of int_pow
correctly computes the power of a given base raised to a given exponent.
The tests check various scenarios and edge cases to ensure the accuracy
and reliability of the exponentiation function.
Updated commit with test information at commit time: Shuah Khan
Signed-off-by: Luis Felipe Hernandez <luis.hernandez093@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The fallback S/G buffer allocation for x86 used the addresses deduced
from the page allocations blindly. It broke the allocations on IOMMU
and made us to work around with a hackish DMA ops check.
For cleaning up those messes, this patch switches to the proper DMA
mapping API usages with the standard sg-table instead.
By introducing the sg-table, the address table isn't needed, but for
keeping the original allocation sizes for freeing, replace it with the
array keeping the number of pages.
The get_addr callback is changed to use the existing one for
non-contiguous buffers. (Also it's the reason sg_table is put at the
beginning of struct snd_dma_sg_fallback.)
And finally, the hackish workaround that checks the DMA ops is
dropped now.
Link: https://patch.msgid.link/20240912155227.4078-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The x86 WC page allocation assumes incorrectly the DMA address
directly taken from the page. Also it checks the DMA ops
inappropriately for switching to the own method.
This patch rewrites the stuff to use the proper DMA mapping API
instead.
Link: https://patch.msgid.link/20240912155227.4078-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Specify shortnames for the following Logitech Devices: Rally bar, Rally
bar mini, Tap, MeetUp and Huddle.
Signed-off-by: Joshua Pius <joshuapius@chromium.org>
Link: https://patch.msgid.link/20240912152635.1859737-1-joshuapius@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
compile_commands.json is used by clangd[1] to provide code navigation
and completion functionality to editors. See [2] for an example
configuration that includes this functionality for VSCode.
It can currently be built manually when using kunit.py, by running:
./scripts/clang-tools/gen_compile_commands.py -d .kunit
With this change however, it's built automatically so you don't need to
manually keep it up to date.
Unlike the manual approach, having make build the compile_commands.json
means that it appears in the build output tree instead of at the root of
the source tree, so you'll need to add --compile-commands-dir=.kunit to
your clangd args for it to be found. This might turn out to be pretty
annoying, I'm not sure yet. If so maybe we can later add some hackery to
kunit.py to work around it.
[1] https://clangd.llvm.org/
[2] https://github.com/FlorentRevest/linux-kernel-vscode
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Negative i_size is never supported, although crafted images with inodes
having negative i_size will NOT lead to security issues in our current
codebase:
The following image can verify this (gzip+base64 encoded):
H4sICCmk4mYAA3Rlc3QuaW1nAGNgGAWjYBSMVPDo4dcH3jP2aTED2TwMKgxMUHHNJY/SQDQX
LxcDIw3tZwXit44MDNpQ/n8gQJZ/vxjijosPuSyZ0DUDgQqcZoKzVYFsDShbHeh6PT29ktTi
Eqz2g/y2pBFiLxDMh4lhs5+W4TAKRsEoGAWjYBSMglEwCkYBPQAAS2DbowAQAAA=
Mark as bad inodes for such corrupted inodes explicitly.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240912083538.3011860-1-hsiangkao@linux.alibaba.com
|
|
Error out if {en,de}encoded size of a pcluster is unsupported:
Maximum supported encoded size (of a pcluster): 1 MiB
Maximum supported decoded size (of a pcluster): 12 MiB
Users can still choose to use supported large configurations (e.g.,
for archival purposes), but there may be performance penalties in
low-memory scenarios compared to smaller pclusters.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240912074156.2925394-1-hsiangkao@linux.alibaba.com
|
|
This patch aims to allocate bvpages and short-lived compressed pages
from the reserved pool first.
After applying this patch, there are three benefits.
1. It reduces the page allocation time.
The bvpages and short-lived compressed pages account for about 4% of
the pages allocated from the system in the multi-app launch benchmarks
[1]. It reduces the page allocation time accordingly and lowers the
likelihood of blockage by page allocation in low memory scenarios.
2. The pages in the reserved pool will be allocated on demand.
Currently, bvpages and short-lived compressed pages are short-lived
pages allocated from the system, and the pages in the reserved pool all
originate from short-lived pages. Consequently, the number of reserved
pool pages will increase to z_erofs_rsv_nrpages over time.
With this patch, all short-lived pages are allocated from the reserved
pool first, so the number of reserved pool pages will only increase when
there are not enough pages. Thus, even if z_erofs_rsv_nrpages is set to
a large number for specific reasons, the actual number of reserved pool
pages may remain low as per demand. In the multi-app launch benchmarks
[1], z_erofs_rsv_nrpages is set at 256, while the number of reserved
pool pages remains below 64.
3. When erofs cache decompression is disabled
(EROFS_ZIP_CACHE_DISABLED), all pages will *only* be allocated from
the reserved pool for erofs. This will significantly reduce the memory
pressure from erofs.
[1] For additional details on the multi-app launch benchmarks, please
refer to commit 0f6273ab4637 ("erofs: add a reserved buffer pool for lz4
decompression").
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240906121110.3701889-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
