| Age | Commit message (Collapse) | Author |
|---|
|
Add compatible values for the msm8916 based LG smartphones.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240623-msm8916-lg-initial-v1-1-6fbcf714d69b@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
DeviceTree validation requires a unit address on the memory node, adjust
the base to match [Ref] and use this as unit address.
The bootloader will update the information with the actual values during
boot.
Ref: https://github.com/msm8916-mainline/lk2nd/blob/main/target/msm8960/rules.mk
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20240706220041.241839-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Now working at Oracle.
Link: https://lkml.kernel.org/r/20240703092704.11571-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on
flags when freeing, yet the flags shown are not bad: PG_locked had been
set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from
deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN
symptoms implying double free by deferred split and large folio migration.
6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large
folio migration") was right to fix the memcg-dependent locking broken in
85ce2c517ade ("memcontrol: only transfer the memcg data for migration"),
but missed a subtlety of deferred_split_scan(): it moves folios to its own
local list to work on them without split_queue_lock, during which time
folio->_deferred_list is not empty, but even the "right" lock does nothing
to secure the folio and the list it is on.
Fortunately, deferred_split_scan() is careful to use folio_try_get(): so
folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable()
while the old folio's reference count is temporarily frozen to 0 - adding
such a freeze in the !mapping case too (originally, folio lock and
unmapping and no swap cache left an anon folio unreachable, so no freezing
was needed there: but the deferred split queue offers a way to reach it).
Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com
Fixes: 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
compat
On a system with Perl 5.12.1, commit 5ef6dc08cfde
("lib/build_OID_registry: don't mention the full path of the script in
output") causes the build to fail with the error below.
Bareword found where operator expected at ./lib/build_OID_registry line 41, near "s#^\Q$abs_srctree/\E##r"
syntax error at ./lib/build_OID_registry line 41, near "s#^\Q$abs_srctree/\E##r"
Execution of ./lib/build_OID_registry aborted due to compilation errors.
make[3]: *** [lib/Makefile:352: lib/oid_registry_data.c] Error 255
Ahmad Fatoum analyzed that non-destructive substitution is only supported since
Perl 5.13.2. Instead of dropping `r` and having the side effect of modifying
`$0`, introduce a dedicated variable to support older Perl versions.
Link: https://lkml.kernel.org/r/20240702223512.8329-2-pmenzel@molgen.mpg.de
Link: https://lkml.kernel.org/r/20240701155802.75152-1-pmenzel@molgen.mpg.de
Fixes: 5ef6dc08cfde ("lib/build_OID_registry: don't mention the full path of the script in output")
Link: https://lore.kernel.org/all/259f7a87-2692-480e-9073-1c1c35b52f67@molgen.mpg.de/
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A kernel warning was reported when pinning folio in CMA memory when
launching SEV virtual machine. The splat looks like:
[ 464.325306] WARNING: CPU: 13 PID: 6734 at mm/gup.c:1313 __get_user_pages+0x423/0x520
[ 464.325464] CPU: 13 PID: 6734 Comm: qemu-kvm Kdump: loaded Not tainted 6.6.33+ #6
[ 464.325477] RIP: 0010:__get_user_pages+0x423/0x520
[ 464.325515] Call Trace:
[ 464.325520] <TASK>
[ 464.325523] ? __get_user_pages+0x423/0x520
[ 464.325528] ? __warn+0x81/0x130
[ 464.325536] ? __get_user_pages+0x423/0x520
[ 464.325541] ? report_bug+0x171/0x1a0
[ 464.325549] ? handle_bug+0x3c/0x70
[ 464.325554] ? exc_invalid_op+0x17/0x70
[ 464.325558] ? asm_exc_invalid_op+0x1a/0x20
[ 464.325567] ? __get_user_pages+0x423/0x520
[ 464.325575] __gup_longterm_locked+0x212/0x7a0
[ 464.325583] internal_get_user_pages_fast+0xfb/0x190
[ 464.325590] pin_user_pages_fast+0x47/0x60
[ 464.325598] sev_pin_memory+0xca/0x170 [kvm_amd]
[ 464.325616] sev_mem_enc_register_region+0x81/0x130 [kvm_amd]
Per the analysis done by yangge, when starting the SEV virtual machine, it
will call pin_user_pages_fast(..., FOLL_LONGTERM, ...) to pin the memory.
But the page is in CMA area, so fast GUP will fail then fallback to the
slow path due to the longterm pinnalbe check in try_grab_folio().
The slow path will try to pin the pages then migrate them out of CMA area.
But the slow path also uses try_grab_folio() to pin the page, it will
also fail due to the same check then the above warning is triggered.
In addition, the try_grab_folio() is supposed to be used in fast path and
it elevates folio refcount by using add ref unless zero. We are guaranteed
to have at least one stable reference in slow path, so the simple atomic add
could be used. The performance difference should be trivial, but the
misuse may be confusing and misleading.
Redefined try_grab_folio() to try_grab_folio_fast(), and try_grab_page()
to try_grab_folio(), and use them in the proper paths. This solves both
the abuse and the kernel warning.
The proper naming makes their usecase more clear and should prevent from
abusing in the future.
peterx said:
: The user will see the pin fails, for gpu-slow it further triggers the WARN
: right below that failure (as in the original report):
:
: folio = try_grab_folio(page, page_increm - 1,
: foll_flags);
: if (WARN_ON_ONCE(!folio)) { <------------------------ here
: /*
: * Release the 1st page ref if the
: * folio is problematic, fail hard.
: */
: gup_put_folio(page_folio(page), 1,
: foll_flags);
: ret = -EFAULT;
: goto out;
: }
[1] https://lore.kernel.org/linux-mm/1719478388-31917-1-git-send-email-yangge1116@126.com/
[shy828301@gmail.com: fix implicit declaration of function try_grab_folio_fast]
Link: https://lkml.kernel.org/r/CAHbLzkowMSso-4Nufc9hcMehQsK9PNz3OSu-+eniU-2Mm-xjhA@mail.gmail.com
Link: https://lkml.kernel.org/r/20240628191458.2605553-1-yang@os.amperecomputing.com
Fixes: 57edfcfd3419 ("mm/gup: accelerate thp gup even for "pages != NULL"")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: yangge <yangge1116@126.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
IPQ SoCs dont involve RPM in managing NoC related clocks and
there is no NoC scaling. Linux itself handles these clocks.
However, these should not be exposed as just clocks and align
with other Qualcomm SoCs that handle these clocks from a
interconnect provider.
Hence include icc provider capability to the gcc node so that
peripherals can use the interconnect facility to enable these
clocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240430064214.2030013-7-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
arm64-for-6.11
Merge IPQ9574 interconnect clock DeviceTree binding to gain access to
the interconnect constants.
|
|
Add interconnect-cells to clock provider so that it can be
used as icc provider.
Add master/slave ids for Qualcomm IPQ9574 Network-On-Chip
interfaces. This will be used by the gcc-ipq9574 driver
that will for providing interconnect services using the
icc-clk framework.
Acked-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240430064214.2030013-3-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device node for video clock controller on Qualcomm
SM8150 platform.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240509-videocc-sm8150-dt-node-v4-2-e9617f65e946@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a node for the vibrator module found inside the PM6150.
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606181027.98537-3-adrian@travitia.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable download mode setting for sc7280 which can help collect
ramdump for this SoC.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240705143443.1491956-1-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to
PM6150L.
Due to hardware constraints we can only register 4 zones with
pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal.
The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-2-a4870a8d084f@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Configure the thermals for the XO_THERM thermistor connected to the
PMK8003 (which is called PMK8350 in software).
The ADC configuration for PMK8350_ADC7_AMUX_THM1_100K_PU has already
been added in the past.
The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-1-a4870a8d084f@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
By default the DSP domains are secure, add the missing
qcom,non-secure-domain property to mark them as non-secure.
Fixes: efc33c969f23 ("arm64: dts: qcom: sm6350: Add ADSP nodes")
Fixes: 8eb5287e8a42 ("arm64: dts: qcom: sm6350: Add CDSP nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240705-sm6350-fastrpc-fix-v2-1-89a43166c9bb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For Gen-1 targets like SDM845, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM845 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-9-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For Gen-1 targets like MSM8996, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8996 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-8-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For Gen-1 targets like SM6350, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6350 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-7-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For Gen-1 targets like SM6115, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6115 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-6-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For Gen-1 targets like SDM630, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM630 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: c65a4ed2ea8b ("arm64: dts: qcom: sdm630: Add USB configuration")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-5-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For Gen-1 targets like MSM8998, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8998 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-4-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For Gen-1 targets like IPQ8074, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ8074 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For Gen-1 targets like IPQ6018, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ6018 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 20bb9e3dd2e4 ("arm64: dts: qcom: ipq6018: add usb3 DT description")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The SHM bridge makes the Qualcomm RB3 and SM8150-HDK reset while probing
the RMTFS (in qcom_scm_assign_mem()). Blacklist the SHM Bridge on
corresponding platforms using SoC-level compat string. If later it's
found that the bad behaviour is limited just to the particular boards
rather than SoC, the compat strings can be adjusted.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: f86c61498a57 ("firmware: qcom: tzmem: enable SHM Bridge support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on Qualcomm RB3
Link: https://lore.kernel.org/r/20240704-shmbridge-blacklist-v1-1-14b027b3b2dc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add an initial devicetree for the Lenovo Yoga slim 7x with support for
Display, usb, keyboard, touchpad, touchscreen, PMICs, speaker audio, gpu,
NVMe and remoteprocs.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20240703-yoga-slim7x-v2-2-3b297dab8db1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the x1e80100 based Lenovo Yoga Slim 7x laptop.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240703-yoga-slim7x-v2-1-3b297dab8db1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240703-thermal-const-v1-5-6e59e139c65d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240703-thermal-const-v1-4-6e59e139c65d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240703-thermal-const-v1-3-6e59e139c65d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240703-thermal-const-v1-2-6e59e139c65d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240703-thermal-const-v1-1-6e59e139c65d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use 'return_ptr' helper for returning a pointer without cleanup for
shorter code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240703083046.95811-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the ID for the PM6350 PMIC found on e.g. SM7225 Fairphone 4.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240703-socinfo-pm6350-v1-1-e12369af3ed6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An i2c driver fix"
* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
|
|
Adds a sysfs entry for the LED on F10 above the crossed out camera icon
on 2023 Zenbooks.
Signed-off-by: Devin Bayer <dev@doubly.so>
Link: https://lore.kernel.org/r/20240628084603.217106-1-dev@doubly.so
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
-I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
cache_shape.c ...
Fixes: 5553a79387e9 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240706120833.909853-1-mpe@ellerman.id.au
|
|
|
|
Add missing selection of AUXILIARY_BUS as the driver uses aux bus to
create subdevices.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406260704.roVRkyPi-lkp@intel.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240626-yoga-fix-aux-v1-1-6aaf9099b18e@linaro.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The internal mic boost on the VAIO models VJFE-CL and VJFE-IL is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240705141012.5368-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
[syzbot reported]
BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160
sized_strscpy+0xc4/0x160
copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411
hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3877 [inline]
slab_alloc_node mm/slub.c:3918 [inline]
kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065
kmalloc include/linux/slab.h:628 [inline]
hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[Fix]
When allocating memory to strbuf, initialize memory to 0.
Reported-and-tested-by: syzbot+efde959319469ff8d4d7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_8BBB6433BC9E1C1B7B4BDF1BF52574BA8808@qq.com
Reported-and-tested-by: syzbot+01ade747b16e9c8030e0@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The method we used was predicated on the assumption that the mount
immediately following the root mount of the mount namespace would be the
rootfs mount of the namespace. That's not always the case though. For
example:
ID PARENT ID
408 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hosts /etc/hosts rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64
409 414 0:61 / /dev/shm rw,nosuid,nodev,noexec,relatime - tmpfs shm rw,size=64000k,uid=1000,gid=1000,inode64
410 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/.containerenv /run/.containerenv rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64
411 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hostname /etc/hostname rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64
412 363 0:65 / / rw,relatime - overlay overlay rw,lowerdir=/home/user1/.local/share/containers/storage/overlay/l/JS65SUCGTPCP2EEBHLRP4UCFI5:/home/user1/.local/share/containers/storage/overlay/l/DLW22KVDWUNI4242D6SDJ5GKCL [...]
413 412 0:68 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw
414 412 0:69 / /dev rw,nosuid - tmpfs tmpfs rw,size=65536k,mode=755,uid=1000,gid=1000,inode64
415 412 0:70 / /sys ro,nosuid,nodev,noexec,relatime - sysfs sysfs rw
416 414 0:71 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666
417 414 0:67 / /dev/mqueue rw,nosuid,nodev,noexec,relatime - mqueue mqueue rw
418 415 0:27 / /sys/fs/cgroup ro,nosuid,nodev,noexec,relatime - cgroup2 cgroup2 rw,nsdelegate,memory_recursiveprot
419 414 0:6 /null /dev/null rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
420 414 0:6 /zero /dev/zero rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
422 414 0:6 /full /dev/full rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
423 414 0:6 /tty /dev/tty rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
430 414 0:6 /random /dev/random rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
431 414 0:6 /urandom /dev/urandom rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
433 413 0:72 / /proc/acpi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
440 413 0:6 /null /proc/kcore ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
441 413 0:6 /null /proc/keys ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
442 413 0:6 /null /proc/timer_list ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
443 413 0:73 / /proc/scsi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
444 415 0:74 / /sys/firmware ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
445 415 0:75 / /sys/dev/block ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
446 413 0:68 /bus /proc/bus ro,nosuid,nodev,noexec,relatime - proc proc rw
447 413 0:68 /fs /proc/fs ro,nosuid,nodev,noexec,relatime - proc proc rw
448 413 0:68 /irq /proc/irq ro,nosuid,nodev,noexec,relatime - proc proc rw
449 413 0:68 /sys /proc/sys ro,nosuid,nodev,noexec,relatime - proc proc rw
450 413 0:68 /sysrq-trigger /proc/sysrq-trigger ro,nosuid,nodev,noexec,relatime - proc proc rw
364 414 0:71 /0 /dev/console rw,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666
In this mount table the root mount of the mount namespace is the mount
with id 363 (It isn't visible because it's literally just what the
rootfs mount is mounted upon and usually it's just a copy of the real
rootfs).
The rootfs mount that's mounted on the root mount of the mount namespace
is the mount with id 412. But the mount namespace contains mounts that
were created before the rootfs mount and thus have earlier mount ids. So
the first call to listmnt_next() would return the mount with the mount
id 408 and not the rootfs mount.
So we need to find the actual rootfs mount mounted on the root mount of
the mount namespace. This logic is also present in mntns_install() where
vfs_path_lookup() is used. We can't use this though as we're holding the
namespace semaphore. We could look at the children of the root mount of
the mount namespace directly but that also seems a bit out of place
while we have the rbtree. So let's just iterate through the rbtree
starting from the root mount of the mount namespace and find the mount
whose parent is the root mount of the mount namespace. That mount will
usually appear very early in the rbtree and afaik there can only be one.
IOW, it would be very strange if we ended up with a root mount of a
mount namespace that has shadow mounts.
Fixes: 0a3deb11858a ("fs: Allow listmount() in foreign mount namespace") # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Kory Maincent says:
====================
net: pse-pd: Add new PSE c33 features
This patch series adds new c33 features to the PSE API.
- Expand the PSE PI informations status with power, class and failure
reason
- Add the possibility to get and set the PSE PIs power limit
v5: https://lore.kernel.org/r/20240628-feature_poe_power_cap-v5-0-5e1375d3817a@bootlin.com
v4: https://lore.kernel.org/r/20240625-feature_poe_power_cap-v4-0-b0813aad57d5@bootlin.com
v3: https://lore.kernel.org/r/20240614-feature_poe_power_cap-v3-0-a26784e78311@bootlin.com
v2: https://lore.kernel.org/r/20240607-feature_poe_power_cap-v2-0-c03c2deb83ab@bootlin.com
v1: https://lore.kernel.org/r/20240529-feature_poe_power_cap-v1-0-0c4b1d5953b8@bootlin.com
====================
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-0-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch expands PSE callbacks with newly introduced
pi_get/set_current_limit() and pi_get_voltage() callback.
It also add the power limit ranges description in the status returned.
The only way to set ps692x0 port power limit is by configure the power
class plus a small power supplement which maximum depends on each class.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-7-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expand the c33 PSE attributes with power limit to be able to set and get
the PSE Power Interface power limit.
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth1"}}'
{'c33-pse-actual-pw': 1700,
'c33-pse-admin-state': 3,
'c33-pse-avail-pw-limit': 97500,
'c33-pse-pw-class': 4,
'c33-pse-pw-d-status': 4,
'c33-pse-pw-limit-ranges': [{'max': 18100, 'min': 15000},
{'max': 38000, 'min': 30000},
{'max': 65000, 'min': 60000},
{'max': 97500, 'min': 90000}],
'header': {'dev-index': 5, 'dev-name': 'eth1'}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-set
--json '{"header":{"dev-name":"eth1"},
"c33-pse-avail-pw-limit":19000}'
None
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-6-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch expands the status information provided by ethtool for PSE c33
with available power limit and available power limit ranges. It also adds
a call to pse_ethtool_set_pw_limit() to configure the PSE control power
limit.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-5-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch add a way to get and set the power limit of a PSE PI.
For that it uses regulator API callbacks wrapper like get_voltage() and
get/set_current_limit() as power is simply V * I.
We used mW unit as defined by the IEEE 802.3-2022 standards.
set_current_limit() uses the voltage return by get_voltage() and the
desired power limit to calculate the current limit. get_voltage() callback
is then mandatory to set the power limit.
get_current_limit() callback is by default looking at a driver callback
and fallback to extracting the current limit from _pse_ethtool_get_status()
if the driver does not set its callback. We prefer let the user the choice
because ethtool_get_status return much more information than the current
limit.
expand pse status with c33_pw_limit_ranges to return the ranges available
to configure the power limit.
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-4-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This update expands pd692x0_ethtool_get_status() callback with newly
introduced details such as the detected class, current power delivered,
and extended state information.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-3-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expand the c33 PSE attributes with PSE class, extended state information
and power consumption.
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth0"}}'
{'c33-pse-actual-pw': 1700,
'c33-pse-admin-state': 3,
'c33-pse-pw-class': 4,
'c33-pse-pw-d-status': 4,
'header': {'dev-index': 4, 'dev-name': 'eth0'}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth0"}}'
{'c33-pse-admin-state': 3,
'c33-pse-ext-state': 'mr-mps-valid',
'c33-pse-ext-substate': 2,
'c33-pse-pw-d-status': 2,
'header': {'dev-index': 4, 'dev-name': 'eth0'}}
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-2-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This update expands the status information provided by ethtool for PSE c33.
It includes details such as the detected class, current power delivered,
and extended state information.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-1-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Loss recovery undo_retrans bookkeeping had a long-standing bug where a
DSACK from a spurious TLP retransmit packet could cause an erroneous
undo of a fast recovery or RTO recovery that repaired a single
really-lost packet (in a sequence range outside that of the TLP
retransmit). Basically, because the loss recovery state machine didn't
account for the fact that it sent a TLP retransmit, the DSACK for the
TLP retransmit could erroneously be implicitly be interpreted as
corresponding to the normal fast recovery or RTO recovery retransmit
that plugged a real hole, thus resulting in an improper undo.
For example, consider the following buggy scenario where there is a
real packet loss but the congestion control response is improperly
undone because of this bug:
+ send packets P1, P2, P3, P4
+ P1 is really lost
+ send TLP retransmit of P4
+ receive SACK for original P2, P3, P4
+ enter fast recovery, fast-retransmit P1, increment undo_retrans to 1
+ receive DSACK for TLP P4, decrement undo_retrans to 0, undo (bug!)
+ receive cumulative ACK for P1-P4 (fast retransmit plugged real hole)
The fix: when we initialize undo machinery in tcp_init_undo(), if
there is a TLP retransmit in flight, then increment tp->undo_retrans
so that we make sure that we receive a DSACK corresponding to the TLP
retransmit, as well as DSACKs for all later normal retransmits, before
triggering a loss recovery undo. Note that we also have to move the
line that clears tp->tlp_high_seq for RTO recovery, so that upon RTO
we remember the tp->tlp_high_seq value until tcp_init_undo() and clear
it only afterward.
Also note that the bug dates back to the original 2013 TLP
implementation, commit 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)").
However, this patch will only compile and work correctly with kernels
that have tp->tlp_retrans, which was added only in v5.8 in 2020 in
commit 76be93fc0702 ("tcp: allow at most one TLP probe per flight").
So we associate this fix with that later commit.
Fixes: 76be93fc0702 ("tcp: allow at most one TLP probe per flight")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Kevin Yang <yyd@google.com>
Link: https://patch.msgid.link/20240703171246.1739561-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
