| Age | Commit message (Collapse) | Author |
|---|
|
The UMP Function Block info m1.0 field (represented by is_midi1 sysfs
entry) is an enumeration from 0 to 2, while the midi2 gadget driver
incorrectly copies it to the corresponding snd_ump_block_info.flags
bits as-is. This made the wrong bit flags set when m1.0 = 2.
This patch corrects the wrong interpretation of is_midi1 bits.
Fixes: 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support")
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20241127070213.8232-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When unbind and bind the device again, kernel will dump below warning:
[ 173.972130] sysfs: cannot create duplicate filename '/devices/platform/soc/4c010010.usb/software_node'
[ 173.981564] CPU: 2 UID: 0 PID: 536 Comm: sh Not tainted 6.12.0-rc6-06344-g2aed7c4a5c56 #144
[ 173.989923] Hardware name: NXP i.MX95 15X15 board (DT)
[ 173.995062] Call trace:
[ 173.997509] dump_backtrace+0x90/0xe8
[ 174.001196] show_stack+0x18/0x24
[ 174.004524] dump_stack_lvl+0x74/0x8c
[ 174.008198] dump_stack+0x18/0x24
[ 174.011526] sysfs_warn_dup+0x64/0x80
[ 174.015201] sysfs_do_create_link_sd+0xf0/0xf8
[ 174.019656] sysfs_create_link+0x20/0x40
[ 174.023590] software_node_notify+0x90/0x100
[ 174.027872] device_create_managed_software_node+0xec/0x108
...
The '4c010010.usb' device is a platform device created during the initcall
and is never removed, which causes its associated software node to persist
indefinitely.
The existing device_create_managed_software_node() does not provide a
corresponding removal function.
Replace device_create_managed_software_node() with the
device_add_software_node() and device_remove_software_node() pair to ensure
proper addition and removal of software nodes, addressing this issue.
Fixes: a9400f1979a0 ("usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241126032841.2458338-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The refcounts of the OF nodes obtained by of_get_child_by_name() calls
in anx7411_typec_switch_probe() are not decremented. Replace them with
device_get_named_child_node() calls and store the return values to the
newly created fwnode_handle fields in anx7411_data, and call
fwnode_handle_put() on them in the error path and in the unregister
functions.
Fixes: e45d7337dc0e ("usb: typec: anx7411: Use of_get_child_by_name() instead of of_find_node_by_name()")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20241126014909.3687917-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An fwnode_handle and usb_role_switch are obtained with an incremented
refcount in anx7411_typec_port_probe(), however the refcounts are not
decremented in the error path. The fwnode_handle is also not decremented
in the .remove() function. Therefore, call fwnode_handle_put() and
usb_role_switch_put() accordingly.
Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20241121023429.962848-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the current USB request was aborted, the spi thread would not respond
to any further requests. This is because the "curr_urb" pointer would
not become NULL, so no further requests would be taken off the queue.
The solution here is to set the "urb_done" flag, as this will cause the
correct handling of the URB. Also clear interrupts that should only be
expected if an URB is in progress.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20241124221430.1106080-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The i.MX95 usb-phy can work with or without orientation-switch. With
current setting, if usb-phy works without orientation-switch, the
dt-schema check will show below error:
phy@4c1f0040: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'ports' is a required property
from schema $id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml#
This will correct the behavior of referring to usb-switch.yaml.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241119105017.917833-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the clocks priv->iclk and priv->fclk were not enabled in ehci_hcd_sh_probe,
they should not be disabled in any path.
Conversely, if they was enabled in ehci_hcd_sh_probe, they must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 63c845522263 ("usb: ehci-hcd: Add support for SuperH EHCI.")
Cc: stable@vger.kernel.org # ff30bd6a6618: sh: clk: Fix clk_enable() to return 0 on NULL clk
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241121114700.2100520-1-mordan@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
User space may unload ip_set.ko while it is itself requesting a set type
backend module, leading to a kernel crash. The race condition may be
provoked by inserting an mdelay() right after the nfnl_unlock() call.
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Merely enabling compile-testing should not enable additional
functionality.
Fixes: 956ee0c5c969c9ca ("gpio: mvebu: allow building the module with COMPILE_TEST=y")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6b9e55dbf544297d5acf743f6fa473791ab10644.1733242798.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The Panther Lake SPI controllers are compatible with the Cannon Lake
controllers. Add support for following SPI controller device IDs:
- H-series: 0xe323
- P-series: 0xe423
- U-series: 0xe423
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20241204080208.1036537-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty.
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When matching erspan_opt in cls_flower, only the (version, dir, hwid)
fields are relevant. However, in fl_set_erspan_opt() it initializes
all bits of erspan_opt and its mask to 1. This inadvertently requires
packets to match not only the (version, dir, hwid) fields but also the
other fields that are unexpectedly set to 1.
This patch resolves the issue by ensuring that only the (version, dir,
hwid) fields are configured in fl_set_erspan_opt(), leaving the other
fields to 0 in erspan_opt.
Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The check for non-zero ring with RSS is only relevant for
ETHTOOL_SRXCLSRLINS command, in other cases the check tries to access
memory which was not initialized by the userspace tool. Only perform the
check in case of ETHTOOL_SRXCLSRLINS.
Without this patch, filter deletion (for example) could statistically
result in a false error:
# ethtool --config-ntuple eth3 delete 484
rmgr: Cannot delete RX class rule: Invalid argument
Cannot delete classification rule
Fixes: 9e43ad7a1ede ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in")
Link: https://lore.kernel.org/netdev/871a9ecf-1e14-40dd-bbd7-e90c92f89d47@nvidia.com/
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241202164805.1637093-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 612b1c0dec5bc7367f90fc508448b8d0d7c05414. On a
scenario with multiple threads blocking on a recvfrom(), we need to call
sock_def_readable() on every __udp_enqueue_schedule_skb() otherwise the
threads won't be woken up as __skb_wait_for_more_packets() is using
prepare_to_wait_exclusive().
Link: https://bugzilla.redhat.com/2308477
Fixes: 612b1c0dec5b ("udp: avoid calling sock_def_readable() if possible")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241202155620.1719-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make napi_hash_lock IRQ safe. It is used during the control path, and is
taken and released in napi_hash_add and napi_hash_del, which will
typically be called by calls to napi_enable and napi_disable.
This change avoids a deadlock in pcnet32 (and other any other drivers
which follow the same pattern):
CPU 0:
pcnet32_open
spin_lock_irqsave(&lp->lock, ...)
napi_enable
napi_hash_add <- before this executes, CPU 1 proceeds
spin_lock(napi_hash_lock)
[...]
spin_unlock_irqrestore(&lp->lock, flags);
CPU 1:
pcnet32_close
napi_disable
napi_hash_del
spin_lock(napi_hash_lock)
< INTERRUPT >
pcnet32_interrupt
spin_lock(lp->lock) <- DEADLOCK
Changing the napi_hash_lock to be IRQ safe prevents the IRQ from firing
on CPU 1 until napi_hash_lock is released, preventing the deadlock.
Cc: stable@vger.kernel.org
Fixes: 86e25f40aa1e ("net: napi: Add napi_config")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/netdev/85dd4590-ea6b-427d-876a-1d8559c7ad82@roeck-us.net/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241202182103.363038-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The return value of xa_store() needs to be checked. This fix adds an
error handling path that resolves the kref inconsistency on failure. As
suggested by Oliver Upton, this function does not return the error code
intentionally because the translation cache is best effort.
Fixes: 8201d1028caa ("KVM: arm64: vgic-its: Maintain a translation cache per ITS")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241130144952.23729-1-keisuke.nishimura@inria.fr
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Catalin reports that a hypervisor lying to a guest about the size
of the ASID field may result in unexpected issues:
- if the underlying HW does only supports 8 bit ASIDs, the ASID
field in a TLBI VAE1* operation is only 8 bits, and the HW will
ignore the other 8 bits
- if on the contrary the HW is 16 bit capable, the ASID field
in the same TLBI operation is always 16 bits, irrespective of
the value of TCR_ELx.AS.
This could lead to missed invalidations if the guest was lead to
assume that the HW had 8 bit ASIDs while they really are 16 bit wide.
In order to avoid any potential disaster that would be hard to debug,
prenent the migration between a host with 8 bit ASIDs to one with
wider ASIDs (the converse was obviously always forbidden). This is
also consistent with what we already do for VMIDs.
If it becomes absolutely mandatory to support such a migration path
in the future, we will have to trap and emulate all TLBIs, something
that nobody should look forward to.
Fixes: d5a32b60dc18 ("KVM: arm64: Allow userspace to change ID_AA64MMFR{0-2}_EL1")
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241203190236.505759-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Split resume into a 3rd step to handle displays when DCC is
enabled on DCN 4.0.1. Move display after the buffer funcs
have been re-enabled so that the GPU will do the move and
properly set the DCC metadata for DCN.
v2: fix fence irq resume ordering
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
dma-buf:
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128135958.GA244627@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121131810.GA54208@linux.fritz.box
|
|
With the new __counted_by annotation in clk_hw_onecell_data, the "num"
struct member must be set before accessing the "hws" array. Failing to
do so will trigger a runtime warning when enabling CONFIG_UBSAN_BOUNDS
and CONFIG_FORTIFY_SOURCE.
Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Link: https://lore.kernel.org/r/20241203142915.345523-1-lihaoyu499@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The Documentation for EN7581 had a typo and still referenced the EN7523
BUS base source frequency. This was in conflict with a different page in
the Documentration that state that the BUS runs at 300MHz (600MHz source
with divisor set to 2) and the actual watchdog that tick at half the BUS
clock (150MHz). This was verified with the watchdog by timing the
seconds that the system takes to reboot (due too watchdog) and by
operating on different values of the BUS divisor.
The correct values for source of BUS clock are 600MHz and 540MHz.
This was also confirmed by Airoha.
Cc: stable@vger.kernel.org
Fixes: 66bc47326ce2 ("clk: en7523: Add EN7581 support")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20241116105710.19748-1-ansuelsmth@gmail.com
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in
node allocations") leads a NULL pointer deference in cache_set_flush().
1721 if (!IS_ERR_OR_NULL(c->root))
1722 list_add(&c->root->list, &c->btree_cache);
>From the above code in cache_set_flush(), if previous registration code
fails before allocating c->root, it is possible c->root is NULL as what
it is initialized. __bch_btree_node_alloc() never returns NULL but
c->root is possible to be NULL at above line 1721.
This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this.
Fixes: 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations")
Signed-off-by: Liequan Che <cheliequan@inspur.com>
Cc: stable@vger.kernel.org
Cc: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20241202115638.28957-1-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit [0] breaks samples/bpf build:
$ make M=samples/bpf
...
make -C /path/to/kernel/samples/bpf/../../tools/lib/bpf \
...
EXTRA_CFLAGS=" \
...
-fsanitize=bounds \
-I/path/to/kernel/usr/include \
...
/path/to/kernel/samples/bpf/libbpf/libbpf.a install_headers
CC /path/to/kernel/samples/bpf/libbpf/staticobjs/libbpf.o
In file included from libbpf.c:29:
/path/to/kernel/tools/include/linux/err.h:35:8: error: 'inline' can only appear on functions
35 | static inline void * __must_check ERR_PTR(long error_)
| ^
The error is caused by `objtree` variable changing definition from `.`
(dot) to an absolute path:
- The variable TPROGS_CFLAGS is constructed as follows:
...
TPROGS_CFLAGS += -I$(objtree)/usr/include
- It is passed as EXTRA_CFLAGS for libbpf compilation:
$(LIBBPF): ...
...
$(MAKE) -C $(LIBBPF_SRC) RM='rm -rf' EXTRA_CFLAGS="$(TPROGS_CFLAGS)"
- Before commit [0], the line passed to libbpf makefile was
'-I./usr/include', where '.' referred to LIBBPF_SRC due to -C flag.
The directory $(LIBBPF_SRC)/usr/include does not exist and thus
was never resolved by C compiler.
- After commit [0], the line passed to libbpf makefile became:
'<output-dir>/usr/include', this directory exists and is resolved by
C compiler.
- Both 'tools/include' and 'usr/include' define files err.h and types.h.
- libbpf expects headers like 'linux/err.h' and 'linux/types.h'
defined in 'tools/include', not 'usr/include', hence the compilation
error.
This commit removes unnecessary -I flags from libbpf compilation.
(libbpf sets up the necessary includes at lib/bpf/Makefile:63).
Changes v1 [1] -> v2:
- dropped unnecessary replacement of KBUILD_OUTPUT with $(objtree)
(Andrii)
Changes v2 [2] -> v3:
- make sure --sysroot option is set for libbpf's EXTRA_CFLAGS,
if $(SYSROOT) is set (Stanislav)
[0] commit 13b25489b6f8 ("kbuild: change working directory to external module directory with M=")
[1] https://lore.kernel.org/bpf/20241202212154.3174402-1-eddyz87@gmail.com/
[2] https://lore.kernel.org/bpf/20241202234741.3492084-1-eddyz87@gmail.com/
Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20241203182222.3915763-1-eddyz87@gmail.com
|
|
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching")
Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When activating a swap file we acquire the root's snapshot drew lock and
then check if the root is dead, failing and returning with -EPERM if it's
dead but without unlocking the root's snapshot lock. Fix this by adding
the missing unlock.
Fixes: 60021bd754c6 ("btrfs: prevent subvol with swapfile from being deleted")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
The following reproducer can cause btrfs mount to fail:
dev="/dev/test/scratch1"
mnt1="/mnt/test"
mnt2="/mnt/scratch"
mkfs.btrfs -f $dev
mount $dev $mnt1
btrfs subvolume create $mnt1/subvol1
btrfs subvolume create $mnt1/subvol2
umount $mnt1
mount $dev $mnt1 -o subvol=subvol1
while mount -o remount,ro $mnt1; do mount -o remount,rw $mnt1; done &
bg=$!
while mount $dev $mnt2 -o subvol=subvol2; do umount $mnt2; done
kill $bg
wait
umount -R $mnt1
umount -R $mnt2
The script will fail with the following error:
mount: /mnt/scratch: /dev/mapper/test-scratch1 already mounted on /mnt/test.
dmesg(1) may have more information after failed mount system call.
umount: /mnt/test: target is busy.
umount: /mnt/scratch/: not mounted
And there is no kernel error message.
[CAUSE]
During the btrfs mount, to support mounting different subvolumes with
different RO/RW flags, we need to detect that and retry if needed:
Retry with matching RO flags if the initial mount fail with -EBUSY.
The problem is, during that retry we do not hold any super block lock
(s_umount), this means there can be a remount process changing the RO
flags of the original fs super block.
If so, we can have an EBUSY error during retry. And this time we treat
any failure as an error, without any retry and cause the above EBUSY
mount failure.
[FIX]
The current retry behavior is racy because we do not have a super block
thus no way to hold s_umount to prevent the race with remount.
Solve the root problem by allowing fc->sb_flags to mismatch from the
sb->s_flags at btrfs_get_tree_super().
Then at the re-entry point btrfs_get_tree_subvol(), manually check the
fc->s_flags against sb->s_flags, if it's a RO->RW mismatch, then
reconfigure with s_umount lock hold.
Reported-by: Enno Gotthold <egotthold@suse.com>
Reported-by: Fabian Vogt <fvogt@suse.com>
[ Special thanks for the reproducer and early analysis pointing to btrfs. ]
Fixes: f044b318675f ("btrfs: handle the ro->rw transition for mounting different subvolumes")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1231836
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- add lockdep annotations for io_uring/encoded read integration, inode
lock is held when returning to userspace
- properly reflect experimental config option to sysfs
- handle NULL root in case the rescue mode accepts invalid/damaged tree
roots (rescue=ibadroot)
- regression fix of a deadlock between transaction and extent locks
- fix pending bio accounting bug in encoded read ioctl
- fix NOWAIT mode when checking references for NOCOW files
- fix use-after-free in a rb-tree cleanup in ref-verify debugging tool
* tag 'for-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep warnings on io_uring encoded reads
btrfs: ref-verify: fix use-after-free after invalid ref action
btrfs: add a sanity check for btrfs root in btrfs_search_slot()
btrfs: don't loop for nowait writes when checking for cross references
btrfs: sysfs: advertise experimental features only if CONFIG_BTRFS_EXPERIMENTAL=y
btrfs: fix deadlock between transaction commits and extent locks
btrfs: fix use-after-free in btrfs_encoded_read_endio()
|
|
The quirk was initially used as a signal to set the discard_zeroes_data
queue limit because there were some use cases that relied on that
behavior. The queue limit no longer exists as every user of it has been
converted to use the write zeroes operation instead.
The quirk now means to use a discard command as an alias to a write
zeroes request. Two of the devices previously using the quirk support
the write zeroes command directly, so these don't need or want to use
discard when the desired operation is to write zeroes.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and udf fixes from Jan Kara:
"Two small UDF fixes for better handling of corrupted filesystem and a
quota fix to fix handling of filesystem freezing"
* tag 'fs_for_v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Verify inode link counts before performing rename
udf: Skip parent dir link count update if corrupted
quota: flush quota_release_work upon quota writeback
|
|
Pull xfs fixes from Carlos Maiolino:
- Use xchg() in xlog_cil_insert_pcp_aggregate()
- Fix ABBA deadlock on a race between mount and log shutdown
- Fix quota softlimit incoherency on delalloc
- Fix sparse inode limits on runt AG
- remove unknown compat feature checks in SB write valdation
- Eliminate a lockdep false positive
* tag 'xfs-fixes-6.13-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't call xfs_bmap_same_rtgroup in xfs_bmap_add_extent_hole_delay
xfs: Use xchg() in xlog_cil_insert_pcp_aggregate()
xfs: prevent mount and log shutdown race
xfs: delalloc and quota softlimit timers are incoherent
xfs: fix sparse inode limits on runt AG
xfs: remove unknown compat feature check in superblock write validation
xfs: eliminate lockdep false positives in xfs_attr_shortform_list
|
|
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access.
Fixes: bbd98fe48a43 ("igb: Fix DCA errors and do not use context index for 82576")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
SFF-8472 (section 5.4 Transceiver Compliance Codes) defines bit 6 as
BASE-BX10. Bit 6 means a value of 0x40 (decimal 64).
The current value in the source code is 0x64, which appears to be a
mix-up of hex and decimal values. A value of 0x64 (binary 01100100)
incorrectly sets bit 2 (1000BASE-CX) and bit 5 (100BASE-FX) as well.
Fixes: 1b43e0d20f2d ("ixgbe: Add 1000BASE-BX support")
Signed-off-by: Tore Amundsen <tore@amundsen.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Ernesto Castellotti <ernesto@castellotti.net>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ixgbe PF driver logs an info message when a VF attempts to negotiate an
API version which it does not support:
VF 0 requested invalid api version 6
The ixgbevf driver attempts to load with mailbox API v1.5, which is
required for best compatibility with other hosts such as the ESX VMWare PF.
The Linux PF only supports API v1.4, and does not currently have support
for the v1.5 API.
The logged message can confuse users, as the v1.5 API is valid, but just
happens to not currently be supported by the Linux PF.
Downgrade the info message to a debug message, and fix the language to
use 'unsupported' instead of 'invalid' to improve message clarity.
Long term, we should investigate whether the improvements in the v1.5 API
make sense for the Linux PF, and if so implement them properly. This may
require yet another API version to resolve issues with negotiating IPSEC
offload support.
Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Reported-by: Yifei Liu <yifei.l.liu@oracle.com>
Link: https://lore.kernel.org/intel-wired-lan/20240301235837.3741422-1-yifei.l.liu@oracle.com/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") added support for v1.5 of the PF to VF mailbox
communication API. This commit mistakenly enabled IPSEC offload for API
v1.5.
No implementation of the v1.5 API has support for IPSEC offload. This
offload is only supported by the Linux PF as mailbox API v1.4. In fact, the
v1.5 API is not implemented in any Linux PF.
Attempting to enable IPSEC offload on a PF which supports v1.5 API will not
work. Only the Linux upstream ixgbe and ixgbevf support IPSEC offload, and
only as part of the v1.4 API.
Fix the ixgbevf Linux driver to stop attempting IPSEC offload when
the mailbox API does not support it.
The existing API design choice makes it difficult to support future API
versions, as other non-Linux hosts do not implement IPSEC offload. If we
add support for v1.5 to the Linux PF, then we lose support for IPSEC
offload.
A full solution likely requires a new mailbox API with a proper negotiation
to check that IPSEC is actually supported by the host.
Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit d9028db618a6 ("idpf: convert to libeth Tx buffer completion")
inadvertently removed code that was necessary for the tx buffer cleaning
routine to iterate over all buffers associated with a packet.
When a frag is too large for a single data descriptor, it will be split
across multiple data descriptors. This means the frag will span multiple
buffers in the buffer ring in order to keep the descriptor and buffer
ring indexes aligned. The buffer entries in the ring are technically
empty and no cleaning actions need to be performed. These empty buffers
can precede other frags associated with the same packet. I.e. a single
packet on the buffer ring can look like:
buf[0]=skb0.frag0
buf[1]=skb0.frag1
buf[2]=empty
buf[3]=skb0.frag2
The cleaning routine iterates through these buffers based on a matching
completion tag. If the completion tag is not set for buf2, the loop will
end prematurely. Frag2 will be left uncleaned and next_to_clean will be
left pointing to the end of packet, which will break the cleaning logic
for subsequent cleans. This consequently leads to tx timeouts.
Assign the empty bufs the same completion tag for the packet to ensure
the cleaning routine iterates over all of the buffers associated with
the packet.
Fixes: d9028db618a6 ("idpf: convert to libeth Tx buffer completion")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Madhu chittim <madhu.chittim@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In switchdev mode the uplink VSI should receive all unmatched packets,
including VLANs. Therefore, VLAN pruning should be disabled if uplink is
in switchdev mode. It is already being done in ice_eswitch_setup_env(),
however the addition of ice_up() in commit 44ba608db509 ("ice: do
switchdev slow-path Rx using PF VSI") caused VLAN pruning to be
re-enabled after disabling it.
Add a check to ice_set_vlan_filtering_features() to ensure VLAN
filtering will not be enabled if uplink is in switchdev mode. Note that
ice_is_eswitch_mode_switchdev() is being used instead of
ice_is_switchdev_running(), as the latter would only return true after
the whole switchdev setup completes.
Fixes: 44ba608db509 ("ice: do switchdev slow-path Rx using PF VSI")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 608a5c05c39b ("virtchnl: support queue rate limit and quanta
size configuration") introduced new virtchnl ops:
- get_qos_caps
- cfg_q_bw
- cfg_q_quanta
New ops were added to ice_virtchnl_dflt_ops, in
commit 015307754a19 ("ice: Support VF queue rate limit and quanta
size configuration"), but not to the ice_virtchnl_repr_ops. Because
of that, if we get one of those messages in switchdev mode we end up
with NULL pointer dereference:
[ 1199.794701] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1199.794804] Workqueue: ice ice_service_task [ice]
[ 1199.794878] RIP: 0010:0x0
[ 1199.795027] Call Trace:
[ 1199.795033] <TASK>
[ 1199.795039] ? __die+0x20/0x70
[ 1199.795051] ? page_fault_oops+0x140/0x520
[ 1199.795064] ? exc_page_fault+0x7e/0x270
[ 1199.795074] ? asm_exc_page_fault+0x22/0x30
[ 1199.795086] ice_vc_process_vf_msg+0x6e5/0xd30 [ice]
[ 1199.795165] __ice_clean_ctrlq+0x734/0x9d0 [ice]
[ 1199.795207] ice_service_task+0xccf/0x12b0 [ice]
[ 1199.795248] process_one_work+0x21a/0x620
[ 1199.795260] worker_thread+0x18d/0x330
[ 1199.795269] ? __pfx_worker_thread+0x10/0x10
[ 1199.795279] kthread+0xec/0x120
[ 1199.795288] ? __pfx_kthread+0x10/0x10
[ 1199.795296] ret_from_fork+0x2d/0x50
[ 1199.795305] ? __pfx_kthread+0x10/0x10
[ 1199.795312] ret_from_fork_asm+0x1a/0x30
[ 1199.795323] </TASK>
Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix incorrect PHY timestamp extraction for ETH56G.
It's better to use FIELD_PREP() than manual shift.
Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
To check if PHY Clock Recovery mechanic is available for a device, there
is a need to verify if given PHY is available within the netlist, but the
netlist node type used for the search is wrong, also the search context
shall be specified.
Modify the search function to allow specifying the context in the
search.
Use the PHY node type instead of CLOCK CONTROLLER type, also use proper
search context which for PHY search is PORT, as defined in E810
Datasheet [1] ('3.3.8.2.4 Node Part Number and Node Options (0x0003)' and
'Table 3-105. Program Topology Device NVM Admin Command').
[1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true
Fixes: 91e43ca0090b ("ice: fix linking when CONFIG_PTP_1588_CLOCK=n")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commits 7999edc484ca ("virt: arm-cca-guest: TSM_REPORT support for
realm") and a06c3fad49a5 ("drivers/virt: pkvm: Add initial support for
running as a protected guest") added arm64 guest-side support for
running in CCA and pKVM confidential computing environments
respectively.
Unfortunately, these changes were not accompanied by a MAINTAINERS
entry and so aren't automatically picked up by the get_maintainer.pl
script. Since the initial support was merged via the arm64 tree, extend
the ARM64 entry to cover the two new directories.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241202145731.6422-3-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Calling the MMIO_GUARD hypercall from guests which have not been
enrolled (e.g. because they are running without pvmfw) results in
-EINVAL being returned. In this case, MMIO_GUARD is not active
and so we can simply proceed with the normal ioremap() routine.
Don't fail ioremap() if MMIO_GUARD fails; instead WARN_ON_ONCE()
to highlight that the pvm environment is slightly wonky.
Fixes: 0f1269495800 ("drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241202145731.6422-2-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Its used from trace__run(), for the 'perf trace' live mode, i.e. its
strace-like, non-perf.data file processing mode, the most common one.
The trace__run() function will set trace->host using machine__new_host()
that is supposed to give a machine instance representing the running
machine, and since we'll use perf_env__arch_strerrno() to get the right
errno -> string table, we need to use machine->env, so initialize it in
machine__new_host().
Before the patch:
(gdb) run trace --errno-summary -a sleep 1
<SNIP>
Summary of events:
gvfs-afc-volume (3187), 2 events, 0.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
pselect6 1 0 0.000 0.000 0.000 0.000 0.00%
GUsbEventThread (3519), 2 events, 0.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
poll 1 0 0.000 0.000 0.000 0.000 0.00%
<SNIP>
Program received signal SIGSEGV, Segmentation fault.
0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
478 if (env->arch_strerrno == NULL)
(gdb) bt
#0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
#1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673
#2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708
#3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747
#4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456
#5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487
#6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351
#7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404
#8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448
#9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560
(gdb)
After:
root@number:~# perf trace -a --errno-summary sleep 1
<SNIP>
pw-data-loop (2685), 1410 events, 16.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68%
ioctl 94 0 0.811 0.004 0.009 0.016 2.82%
read 188 0 0.322 0.001 0.002 0.006 5.15%
write 141 0 0.280 0.001 0.002 0.018 8.39%
timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47%
gnome-control-c (179406), 1848 events, 20.9%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
poll 222 0 959.577 0.000 4.322 21.414 11.40%
recvmsg 150 0 0.539 0.001 0.004 0.013 5.12%
write 300 0 0.442 0.001 0.001 0.007 3.29%
read 150 0 0.183 0.001 0.001 0.009 5.53%
getpid 102 0 0.101 0.000 0.001 0.008 7.82%
root@number:~#
Fixes: 54373b5d53c1f6aa ("perf env: Introduce perf_env__arch_strerrno()")
Reported-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When arm64 is configured with CONFIG_DEBUG_VIRTUAL=y, a warning is
printed from the patching code because patch_map(), e.g.
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/patching.c:45 patch_map.constprop.0+0x120/0xd00
| CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc1-00002-ge1a5d6c6be55 #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 800003c5 (Nzcv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : patch_map.constprop.0+0x120/0xd00
| lr : patch_map.constprop.0+0x120/0xd00
| sp : ffffa9bb312a79a0
| x29: ffffa9bb312a79a0 x28: 0000000000000001 x27: 0000000000000001
| x26: 0000000000000000 x25: 0000000000000000 x24: 00000000000402e8
| x23: ffffa9bb2c94c1c8 x22: ffffa9bb2c94c000 x21: ffffa9bb222e883c
| x20: 0000000000000002 x19: ffffc1ffc100ba40 x18: ffffa9bb2cf0f21c
| x17: 0000000000000006 x16: 0000000000000000 x15: 0000000000000004
| x14: 1ffff5376625b4ac x13: ffff753766a67fb8 x12: ffff753766919cd1
| x11: 0000000000000003 x10: 1ffff5376625b4c3 x9 : 1ffff5376625b4af
| x8 : ffff753766254f0a x7 : 0000000041b58ab3 x6 : ffff753766254f18
| x5 : ffffa9bb312d9bc0 x4 : 0000000000000000 x3 : ffffa9bb29bd90e4
| x2 : 0000000000000002 x1 : ffffa9bb312d9bc0 x0 : 0000000000000000
| Call trace:
| patch_map.constprop.0+0x120/0xd00 (P)
| patch_map.constprop.0+0x120/0xd00 (L)
| __aarch64_insn_write+0xa8/0x120
| aarch64_insn_patch_text_nosync+0x4c/0xb8
| arch_jump_label_transform_queue+0x7c/0x100
| jump_label_update+0x154/0x460
| static_key_enable_cpuslocked+0x1d8/0x280
| static_key_enable+0x2c/0x48
| early_randomize_kstack_offset+0x104/0x168
| do_early_param+0xe4/0x148
| parse_args+0x3a4/0x838
| parse_early_options+0x50/0x68
| parse_early_param+0x58/0xe0
| setup_arch+0x78/0x1f0
| start_kernel+0xa0/0x530
| __primary_switched+0x8c/0xa0
| irq event stamp: 0
| hardirqs last enabled at (0): [<0000000000000000>] 0x0
| hardirqs last disabled at (0): [<0000000000000000>] 0x0
| softirqs last enabled at (0): [<0000000000000000>] 0x0
| softirqs last disabled at (0): [<0000000000000000>] 0x0
| ---[ end trace 0000000000000000 ]---
The warning has been produced since commit:
3e25d5a49f99b75b ("asm-generic: add an optional pfn_valid check to page_to_phys")
... which added a pfn_valid() check into page_to_phys(), and at this
point in boot pfn_valid() will always return false because the vmemmap
has not yet been initialized and there are no valid mem_sections yet.
Before that commit, the arithmetic performed by page_to_phys() would
give the expected physical address, though it is somewhat dubious to use
vmemmap addresses before the vmemmap has been initialized.
Aside from kernel image addresses, all executable code should be
allocated from execmem (where all allocations will fall within the
vmalloc area), and so there's no need for the fallback case when
CONFIG_EXECMEM=n.
Simplify patch_map() accordingly, directly converting kernel image
addresses and removing the redundant fallback case.
Fixes: 3e25d5a49f99 ("asm-generic: add an optional pfn_valid check to page_to_phys")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241202170359.1475019-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Be specific about what fields should be accessed in the idr result and
give other guidance to the VMM on how it should generate the
vIDR. Discussion on the list, and review of the qemu implementation
understood this needs to be clearer and more detailed.
Link: https://patch.msgid.link/r/0-v1-191e5e24cec3+3b0-iommufd_smmuv3_hwinf_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Commit ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by
zone_dma_limit") and subsequent patches changed how zone_dma_limit is
calculated to allow a reduced ZONE_DMA even when RAM starts above 4GB.
Commit 122c234ef4e1 ("arm64: mm: keep low RAM dma zone") further fixed
this to ensure ZONE_DMA remains below U32_MAX if RAM starts below 4GB,
especially on platforms that do not have IORT or DT description of the
device DMA ranges. While zone boundaries calculation was fixed by the
latter commit, zone_dma_limit, used to determine the GFP_DMA flag in the
core code, was not updated. This results in excessive use of GFP_DMA and
unnecessary ZONE_DMA allocations on some platforms.
Update zone_dma_limit to match the actual upper bound of ZONE_DMA.
Fixes: ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by zone_dma_limit")
Cc: <stable@vger.kernel.org> # 6.12.x
Reported-by: Yutang Jiang <jiangyutang@os.amperecomputing.com>
Tested-by: Yutang Jiang <jiangyutang@os.amperecomputing.com>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20241125171650.77424-1-yang@os.amperecomputing.com
[catalin.marinas@arm.com: some tweaking of the commit log]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
compile-testing
Merely enabling compile-testing should not enable additional functionality.
Fixes: 0be58e0553812fcb ("irqchip/stm32mp-exti: Allow building as module")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/ef5ec063b23522058f92087e072419ea233acfe9.1733243115.git.geert+renesas@glider.be
|
|
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts the misconversions introduced by commit cdd30ebb1b9f
("module: Convert symbol namespace to string literal").
The affected descriptions refer to MODULE_IMPORT_NS() tags in general,
rather than suggesting the use of the empty string ("") as the
namespace.
Fixes: cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal"), when MODULE_IMPORT_NS() is missing, 'make nsdeps' inserts
pointless code:
MODULE_IMPORT_NS("ns");
Here, "ns" is not a namespace, but the variable in the semantic patch.
It must not be quoted. Instead, a string literal must be passed to
Coccinelle.
Fixes: cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
