summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-10hv: export current Hyper-V clocksourceVitaly Kuznetsov
As a preparation to implementing Hyper-V PTP device supporting .getcrosststamp we need to export a reference to the current Hyper-V clocksource in use (MSR or TSC page). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10Drivers: hv: Fix the bug in generating the guest IDK. Y. Srinivasan
Fix the bug in the generation of the guest ID. Without this fix the host side telemetry code is broken. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Fixes: 352c9624242d ("Drivers: hv: vmbus: Move the definition of generate_guest_id()") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10misc: panel: Abstract temporary backlight handlingGeert Uytterhoeven
Currently the periodic scan timer is used for three purposes, entangling keypad and display handling, which are both optional: 1. Scanning the keypad, 2. Flashing the backlight when a key is pressed, 3. Disabling temporary backlighting after a fixed period of time. Abstract the second purpose using a new lcd_poke() function. Make the non-periodic temporary backlight handling independent from keypad handling by converting it to a delayed workqueue. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10misc: panel: Add lcd_home() helperGeert Uytterhoeven
Add a helper function to move the cursor to the home position, so callers no longer need access to internal state. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10misc: panel: Remove always-true check from panel_detach()Geert Uytterhoeven
panel_detach() already verified that pptr is a valid pointer. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10misc: panel: Move all suboptions into a big if sectionGeert Uytterhoeven
All 18 suboptions related to the panel driver have individual dependencies on PANEL. Replace them by a single "if PANEL / endif # PANEL" section for easier dependency management. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10misc: panel: Remove reference to misc device supportGeert Uytterhoeven
As of commit 7c5763b8453a9487 ("drivers: misc: Remove MISC_DEVICES config option"), misc device support no longer needs to be enabled manually. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10misc: panel: Remove unused LCD_FLAG_S and LCD_FLAG_IDGeert Uytterhoeven
These definitions were never used in any publicly available version since (at least) 2004. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10misc: panel: Remove PANEL_VERSIONGeert Uytterhoeven
Hardcoded driver versions are so pre-git. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10misc: panel: Fix LCD_FLAG_F/LCD_FLAG_N exchangeGeert Uytterhoeven
LCD_FLAG_F is the font flag, LCD_FLAG_N is the two-lines flag. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10w1: ds2405: use module_w1_family to simplify the codeWei Yongjun
module_w1_family() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10w1: ds2490: use kmemdup rather than duplicating its implementationWei Yongjun
Use kmemdup rather than duplicating its implementation. Generated by: scripts/coccinelle/api/memdup.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10fpga zynq: Use the scatterlist interfaceJason Gunthorpe
This allows the driver to avoid a high order coherent DMA allocation and memory copy. With this patch it can DMA directly from the kernel pages that the bitfile is stored in. Since this is now a gather DMA operation the driver uses the ISR to feed the chips DMA queue with each entry from the SGL. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10fpga: Add scatterlist based programmingJason Gunthorpe
Requiring contiguous kernel memory is not a good idea, this is a limited resource and allocation can fail under normal work loads. This introduces a .write_sg op that supporting drivers can provide to DMA directly from dis-contiguous memory and a new entry point fpga_mgr_buf_load_sg that users can call to directly provide page lists. The full matrix of compatibility is provided, either the linear or sg interface can be used by the user with a driver supporting either interface. A notable change for drivers is that the .write op can now be called multiple times. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10fpga zynq: Check the bitstream for validityJason Gunthorpe
There is no sense in sending a bitstream we know will not work, and with the variety of options for bitstream generation in Xilinx tools it is not terribly clear what the correct input should be. This is particularly important for Zynq since auto-correction was removed from the driver and the Zynq hardware only accepts a bitstream format that is different from what the Xilinx tools typically produce. Worse, the hardware provides no indication why the bitstream fails, it simply times out if the input is wrong. The best option here is to have the kernel print a message informing the user they are using a malformed bistream and programming failure isn't for any of the myriad of other reasons. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10fpga zynq: Check for errors after completing DMAJason Gunthorpe
The completion did not check the interrupt status to see if any error bits were asserted, check error bits and dump some registers if things went wrong. A few fixes are needed to make this work, the IXR_ERROR_FLAGS_MASK was wrong, it included the done bits, which shows a bug in mask/unmask_irqs which were using the wrong bits, simplify all of this stuff. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10mei: remove support for broken parallel readAlexander Usyskin
Parallel reads from multiple threads on a file descriptor are not well defined and racy. It is safer to return to original behavior and simply fail the additional read. The solution is to remove request for next read credit. Cc: <stable@vger.kernel.org> #4.9 Fixes: ff1586a7ea57 ("mei: enqueue consecutive reads") Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10drivers/fsi: add driver to device matchesJeremy Kerr
Driver bind to devices based on the engine types & (optional) versions. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Chris Bostic <cbostic@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10drivers/fsi: Add device & driver definitionsJeremy Kerr
Add structs for fsi devices & drivers, and struct device conversion functions. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Chris Bostic <cbostic@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10drivers/fsi: Add empty fsi bus definitionsJeremy Kerr
This change adds the initial (empty) fsi bus definition, and introduces drivers/fsi/. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Chris Bostic <cbostic@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Enable MSI supportJan Kiszka
Use pci_alloc_irq_vectors to enable MSI when available. At least the XR17V352 supports this. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Move register defines from uapi header to consumer siteJan Kiszka
None of these registers is relevant for the userspace API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10Merge branches 'iommu/fixes', 'arm/exynos', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel
'arm/mediatek', 'arm/core', 'x86/vt-d' and 'core' into next
2017-02-10serial: pci: Remove unused pci_boards entriesJan Kiszka
Became obsolete with the split-out of 8250_exar. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Move Commtech adapters to 8250_exar as wellJan Kiszka
Those are Exar-based, too. With the required refactoring of the code to fit into 8250_exar, we automatically fix the same issue pci_xr17v35x_setup had before: 8XMODE, FCTL, TXTRG and RXTRG were always only set for port 0. Now they are initialized for the correct target port by using port.membase. Now we can also cleanly fix the blacklist of 8250_pci so that all Commtech devices are rejected and 8250_exar can handle them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Fix feature control register constantsJan Kiszka
According to the XR17V352 manual, bit 4 is IrDA control and bit 5 for 485. Fortunately, no driver used them so far. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Fix initialization of EXAR registers for ports > 0Jan Kiszka
So far, pci_xr17v35x_setup always initialized 8XMODE, FCTR & Co. for port 0 because it used the address of that port instead of moving the pointer according to the port number. Fix this and remove the unneeded temporary ioremap by moving default_setup up and reusing the membase it fills into the port structure. Fixes: 14faa8cce88e ("tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: exar: Fix mapping of port I/O resourcesJan Kiszka
pcim_iomap_table only returns the table of mapping, it does not perform them. For that, we need to call pcim_iomap, but only if that mapping was not done before. Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: sh-sci: fix hardware RX trigger level settingUlrich Hecht
1. Do not set the RX trigger level for software timeout devices on reset; there is no timeout by default, and data will rot. 2. Do set the RX trigger level for hardware timeout devices when set via sysfs attribute. Fixes SCIFA-type serial consoles. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10tty/serial: atmel: ensure state is restored after suspendingAlexandre Belloni
When going to suspend, the UART registers may be lost because the power to VDDcore is cut. This is not an issue in the normal case but when no_console_suspend is used, we need to restore the registers in order to get a functional console. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10serial: 8250_dw: Avoid "too much work" from bogus rx timeout interruptDouglas Anderson
On a Rockchip rk3399-based board during suspend/resume testing, we found that we could get the console UART into a state where it would print this to the console a lot: serial8250: too much work for irq42 Followed eventually by: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 11s! Upon debugging I found that we're in this state: iir = 0x000000cc lsr = 0x00000060 It appears that somehow we have a RX Timeout interrupt but there is no actual data present to receive. When we're in this state the UART driver claims that it handled the interrupt but it actually doesn't really do anything. This means that we keep getting the interrupt over and over again. Normally we don't actually need to do anything special to handle a RX Timeout interrupt. We'll notice that there is some data ready and we'll read it, which will end up clearing the RX Timeout. In this case we have a problem specifically because we got the RX TImeout without any data. Reading a bogus byte is confirmed to get us out of this state. It's unclear how exactly the UART got into this state, but it is known that the UART lines are essentially undriven and unpowered during suspend, so possibly during resume some garbage / half transmitted bits are seen on the line and put the UART into this state. The UART on the rk3399 is a DesignWare based 8250 UART. From mailing list posts, it appears that other people have run into similar problems with DesignWare based IP. Presumably this problem is unique to that IP, so I have placed the workaround there to avoid possibly of accidentally triggering bad behavior on other IP. Also note the RX Timeout behaves very differently in the DMA case, for for now the workaround is only applied to the non-DMA case. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10vfio/type1: Fix error return code in vfio_iommu_type1_attach_group()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 5d704992189f ("vfio/type1: Allow transparent MSI IOVA allocation") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10staging: bcm2835-audio: Make internal symbols staticSimon Sandström
Fixes sparse warnings: warning: symbol 'xxx' was not declared. Should it be static? Signed-off-by: Simon Sandström <simon@nikanor.nu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10staging: bcm2835-audio: Fixed initialization of global to "false"Abhijit Naik
bcm2835-vchiq.c: fixing ERROR: do not initialise globals to false Instead of explicitly initializing global variable force_bulk to "false", declared force_bulk as static variable. Signed-off-by: Abhijit Naik <abhijitnaik27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10staging: wlan_ng: fix logical continuation alignmentFrans Klaver
It appears that our coding style prefers that logical continuations have the operator at the end of the line. Fix that. While at it, stick the 'if' after 'else' where it belongs. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10staging:vt6656:baseband.h: fix function definition argument without ↵Arushi Singhal
identifier name issue Function definitions arguments should also have an identifier name as reported by checkpatch.pl. Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10staging: rtl8192u: Adding a blank line after declarationssimran singhal
This patch fixes the checkpatch warning by adding a blank line after declarations. WARNING: Missing a blank line after declarations Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10Staging: rtl8192e: remove redundant null check on array algColin Ian King
u.crypt.alg is an array of u8 integers and hence the null check on this array is redundant and can be removed. Detected with CoverityScan, CID#146583 ("Array compared against 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10staging: fsl-mc: update MAINTAINERSStuart Yoder
Add Laurentiu Tudor as a second maintainer and update Stuart Yoder's email address. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10iommu: Remove iommu_register_instance interfaceJoerg Roedel
And also move its remaining functionality to iommu_device_register() and 'struct iommu_device'. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10iommu/exynos: Make use of iommu_device_register interfaceJoerg Roedel
Register Exynos IOMMUs to the IOMMU core and make them visible in sysfs. This patch does not add the links between IOMMUs and translated devices yet. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10Merge tag 'irqchip-fixes-4.10' of ↵Thomas Gleixner
git://git.infradead.org/users/jcooper/linux into irq/urgent Pull irqchip fixes for v4.10 from Jason Cooper - keystone: Fix scheduling while atomic for realtime - mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
2017-02-10irqdesc: Add a resource managed version of irq_alloc_descs()Bartosz Golaszewski
Add a devres flavor of __devm_irq_alloc_descs() and corresponding helper macros. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Link: http://lkml.kernel.org/r/1486729403-21132-1-git-send-email-bgolaszewski@baylibre.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10mtd: spi-nor: cqspi: remove redundant dead code on error return checkColin Ian King
Checking for ret < 0 is redundant because a previous check on ret being non-zero already handles the ret < 0 case. Remove the redundant code. Found by CoverityScan, CID#1398863, CID#1398864 Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10Documentation: mtk-quadspi: update DT bindingsGuochun Mao
Add "mediatek,mt2701-nor" for nor flash node's compatible. Signed-off-by: Guochun Mao <guochun.mao@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READYunhui Cui
There are some read modes for flash, such as NORMAL, FAST, QUAD, DDR QUAD. These modes will use the identical lut table base So rename SEQID_QUAD_READ to SEQID_READ. Signed-off-by: Yunhui Cui <B56489@freescale.com> Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd:fsl-quadspi:use the property fields of SPI-NORYunhui Cui
We can get the read/write/erase opcode from the spi nor framework directly. This patch uses the information stored in the SPI-NOR to remove the hardcode in the fsl_qspi_init_lut(). Signed-off-by: Yunhui Cui <B56489@freescale.com> Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: Add support for gd25q16Kamal Dasu
Add GigaDevice GD25Q16 (16M-bit) to supported list. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: Fix S3AN addressing calculationRicardo Ribalda
The page calculation under spi_nor_s3an_addr_convert() was wrong. On Default Address Mode we need to perform a divide by page_size. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: aspeed: fix compile warning in aspeed_smc_read_from_ahb()Cédric Le Goater
The first argument of ioread32_rep() and ioread8_rep is not const. Change aspeed_smc_read_from_ahb() prototype to fix compile warning : drivers/mtd/spi-nor/aspeed-smc.c: In function 'aspeed_smc_read_from_ahb': drivers/mtd/spi-nor/aspeed-smc.c:212:16: warning: passing argument 1 of 'ioread32_rep' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ioread32_rep(src, buf, len >> 2); Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
generated by cgit (git 2.34.1) at 2025-09-23 23:14:50 +0000