summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-20mac80211: properly free requested-but-not-started TX agg sessionsJohannes Berg
When deleting a station or otherwise tearing down all aggregation sessions, make sure to delete requested but not yet started ones, to avoid the following scenario: * session is requested, added to tid_start_tx[] * ieee80211_ba_session_work() runs, gets past BLOCK_BA check * ieee80211_sta_tear_down_BA_sessions() runs, locks &sta->ampdu_mlme.mtx, e.g. while deleting the station - deleting all active sessions * ieee80211_ba_session_work() continues since tear down flushes it, and calls ieee80211_tx_ba_session_handle_start() for the new session, arms the timer for it * station deletion continues to __cleanup_single_sta() and frees the session struct, while the timer is armed Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()Ben Hutchings
hwsim_new_radio_nl() now copies the name attribute in order to add a null-terminator. mac80211_hwsim_new_radio() (indirectly) copies it again into the net_device structure, so the first copy is not used or freed later. Free the first copy before returning. Fixes: ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20cfg80211: initialize regulatory keys/database laterJohannes Berg
When cfg80211 is built as a module, everything is fine, and we can keep the code as is; in fact, we have to, because there can only be a single module_init(). When cfg80211 is built-in, however, it needs to initialize before drivers (device_initcall/module_init), and thus used to be at subsys_initcall(). I'd moved it to fs_initcall() earlier, where it can remain. However, this is still too early because at that point the key infrastructure hasn't been initialized yet, so X.509 certificates can't be parsed yet. To work around this problem, load the regdb keys only later in a late_initcall(), at which point the necessary infrastructure has been initialized. Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking") Reported-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20mac80211: aggregation: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. This removes the tid mapping array and expands the tid structures to add a pointer back to the station, along with the tid index itself. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> [switch tid variables to u8, the valid range is 0-15 at most, initialize tid_tx->sta/tid properly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20nl80211: don't expose wdev->ssid for most interfacesJohannes Berg
For mesh, this is simply wrong - there's no SSID, only the mesh ID, so don't expose it at all. For (P2P) client, it's wrong, because it exposes an internal value that's only used when certain APIs are used. For AP, it's actually the only correct case, so leave that. All other interface types shouldn't be setting this anyway, so there it won't change anything. Fixes: b84e7a05f619 ("nl80211: send the NL80211_ATTR_SSID in nl80211_send_iface()") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20mac80211: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20Merge tag 'iwlwifi-for-kalle-2017-11-19' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes iwlwifi: first set of fixes for 4.15 * Support new FW API version of scan cmd (used in FW version 34); * Add a bunch of PCI IDs and fix configuration structs for A000 devices; * Fix the exported firmware name strings for 9000 and A000 devices;
2017-11-20drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding supportJyri Sarha
This patch removes DRM_TILCDC_SLAVE_COMPAT option for supporting the obsolete "ti,tilcdc,slave" device tree binding. The new of_graph based binding - that is widely used in other drm driver too - has been supported since Linux v4.2. Maintaining the the backwards dts conversion code in the DRM_TILCDC_SLAVE_COMPAT has become a nuisance for the device/of development so the we decided to drop it after Linux v4.14, the 2017 LTS. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Rob Herring <robh@kernel.org>
2017-11-20drm/tegra: sor: Reimplement pad clockThierry Reding
The current implementation of the pad clock isn't quite correct. This has the side-effect of being incompatible with the implementation for Tegra186 (provided by the BPMP) and therefore would require a massive change to the driver to cope with the differences. Instead, simply do what Tegra186 does and add some code to fallback to the old behaviour for existing device trees. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-11-20powerpc/64s/slice: Use addr limit when computing slice maskAneesh Kumar K.V
While computing slice mask for the free area we need make sure we only search in the addr limit applicable for this mmap. We update the slb_addr_limit after we request for a mmap above 128TB. But the following mmap request with hint addr below 128TB should still limit its search to below 128TB. ie. we should not use slb_addr_limit to compute slice mask in this case. Instead, we should derive high addr limit based on the mmap hint addr value. Fixes: f4ea6dcb08ea ("powerpc/mm: Enable mappings above 128TB") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-20ALSA: hda/realtek: Add headset mic support for Intel NUC Skull CanyonKai-Heng Feng
Users have been using knob "model=dell-headset-multi" on Intel Skull Canyon for a while. Add the equivalent quirk, ALC269_FIXUP_DELL1_MIC_NO_PRESENCE for Skull Canyon. BugLink: https://bugs.launchpad.net/bugs/1732034 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-19Merge tag 'ntb-4.15' of git://github.com/jonmason/ntbLinus Torvalds
Pull ntb updates from Jon Mason: "Support for the switchtec ntb and related changes. Also, a couple of bug fixes" [ The timing isn't great. I had asked people to send me pull requests before my family vacation, and this code has not even been in linux-next as far as I can tell. But Logan Gunthorpe pleaded for its inclusion because the Switchtec driver has apparently been around for a while, just never in linux-next - Linus ] * tag 'ntb-4.15' of git://github.com/jonmason/ntb: ntb: intel: remove b2b memory window workaround for Skylake NTB NTB: make idt_89hpes_cfg const NTB: switchtec_ntb: Update switchtec documentation with notes for NTB NTB: switchtec_ntb: Add memory window support NTB: switchtec_ntb: Implement scratchpad registers NTB: switchtec_ntb: Implement doorbell registers NTB: switchtec_ntb: Add link management NTB: switchtec_ntb: Add skeleton NTB driver NTB: switchtec_ntb: Initialize hardware for doorbells and messages NTB: switchtec_ntb: Initialize hardware for memory windows NTB: switchtec_ntb: Introduce initial NTB driver NTB: Add check and comment for link up to mw_count() and mw_get_align() NTB: Ensure ntb_mw_get_align() is only called when the link is up NTB: switchtec: Add link event notifier callback NTB: switchtec: Add NTB hardware register definitions NTB: switchtec: Export class symbol for use in upper layer driver NTB: switchtec: Move structure definitions into a common header ntb: update maintainer list for Intel NTB driver
2017-11-20net: vxge: Fix some indentation issuesChristophe JAILLET
Some statements are not enough or too much indented. Fix it to improve readalbility. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-20net: ena: fix race condition between device reset and link up setupNetanel Belgazal
In rare cases, ena driver would reset and re-start the device, for example, in case of misbehaving application that causes transmit timeout The first step in the reset procedure is to stop the Tx traffic by calling ena_carrier_off(). After the driver have just started the device reset procedure, device happens to send an asynchronous notification (via AENQ) to the driver than there was a link change (to link-up state). This link change is mapped to a call to netif_carrier_on() which re-activates the Tx queues, violating the assumption of no tx traffic until device reset is completed, as the reset task might still be in the process of queues initialization, leading to an access to uninitialized memory. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-199p: Fix missing commas in mount optionsTuomas Tynkkynen
Since commit c4fac9100456 ("9p: Implement show_options"), the mount options of 9p filesystems are printed out with some missing commas between the individual options: p9-scratch on /mnt/scratch type 9p (rw,dirsync,loose,access=clienttrans=virtio) Add them back. Cc: stable@vger.kernel.org # 4.13+ Fixes: c4fac9100456 ("9p: Implement show_options") Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-20ima: do not update security.ima if appraisal status is not INTEGRITY_PASSRoberto Sassu
Commit b65a9cfc2c38 ("Untangling ima mess, part 2: deal with counters") moved the call of ima_file_check() from may_open() to do_filp_open() at a point where the file descriptor is already opened. This breaks the assumption made by IMA that file descriptors being closed belong to files whose access was granted by ima_file_check(). The consequence is that security.ima and security.evm are updated with good values, regardless of the current appraisal status. For example, if a file does not have security.ima, IMA will create it after opening the file for writing, even if access is denied. Access to the file will be allowed afterwards. Avoid this issue by checking the appraisal status before updating security.ima. Cc: stable@vger.kernel.org Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-11-20Merge tag 'drm-fsl-dcu-fixes-for-v4.15' of ↵Dave Airlie
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-next Some cleanup/fixes, some noticed during testing of Noralf Trønnes rework of the suspend/resume helper. He will rebase the patchset ontop of this. * tag 'drm-fsl-dcu-fixes-for-v4.15' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume() drm/fsl-dcu: avoid disabling pixel clock twice on suspend drm/fsl-dcu: Don't set connector DPMS property
2017-11-20Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Misc fixes for 4.15. * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: drm/amd/pp: fix dpm randomly failed on Vega10 drm/amdgpu: set f_mapping on exported DMA-bufs drm/amdgpu: Properly allocate VM invalidate eng v2 drm/amd/amdgpu: if visible VRAM allocation fail, fall back to invisible try again drm/amd/amdgpu: Fix wave mask in amdgpu_debugfs_wave_read() (v2) drm/amdgpu: make AMDGPU_VA_RESERVED_SIZE 64bit drm/amdgpu/gfx9: implement wave VGPR reading drm/amdgpu: Add common golden settings for GFX9 drm/amd/powerplay: fix copy-n-paste error on vddci_buf index drm/amdgpu: Fix null pointer issue in amdgpu_cs_wait_any_fence drm/amdgpu: Remove check which is not valid for certain VBIOS
2017-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull small IDE cleanup from David Miller. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: PNP: ide: constify pnp_device_id
2017-11-19r8169: use same RTL8111EVL green settings as in vendor driverHeiner Kallweit
Adjust the code to use the same green settings as in the latest vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-19r8169: fix RTL8111EVL EEE and green settingsHeiner Kallweit
Name of functions rtl_w0w1_eri and rtl_w0w1_phy is somewhat misleading regarding order of arguments. One could assume that w0w1 means argument with bits to be reset comes before argument with bits to set. However this is not the case. So fix the order of arguments in several statements. In addition fix EEE advertisement. The current code resets the bits for 100BaseT and 1000BaseT EEE advertisement what is not what we want. I have a little of a hard time to find a proper "Fixes" line as the issue seems to have been there forever (at least it existed already when the driver was moved to the current place in 2011). The patch was tested on a Zotac Mini-PC with a RTL8111E-VL chip. Before the patch EEE was disabled, now it's properly advertised and works fine. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-19tun: fix rcu_read_lock imbalance in tun_build_skbXin Long
rcu_read_lock in tun_build_skb is used to rcu_dereference tun->xdp_prog safely, rcu_read_unlock should be done in every return path. Now I could see one place missing it, where it returns NULL in switch-case XDP_REDIRECT, another palce using rcu_read_lock wrongly, where it returns NULL in if (xdp_xmit) chunk. So fix both in this patch. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-19tcp: when scheduling TLP, time of RTO should account for current ACKNeal Cardwell
Fix the TLP scheduling logic so that when scheduling a TLP probe, we ensure that the estimated time at which an RTO would fire accounts for the fact that ACKs indicating forward progress should push back RTO times. After the following fix: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed") we had an unintentional behavior change in the following kind of scenario: suppose the RTT variance has been very low recently. Then suppose we send out a flight of N packets and our RTT is 100ms: t=0: send a flight of N packets t=100ms: receive an ACK for N-1 packets The response before df92c8394e6e that was: -> schedule a TLP for now + RTO_interval The response after df92c8394e6e is: -> schedule a TLP for t=0 + RTO_interval Since RTO_interval = srtt + RTT_variance, this means that we have scheduled a TLP timer at a point in the future that only accounts for RTT_variance. If the RTT_variance term is small, this means that the timer fires soon. Before df92c8394e6e this would not happen, because in that code, when we receive an ACK for a prefix of flight, we did: 1) Near the top of tcp_ack(), switch from TLP timer to RTO at write_queue_head->paket_tx_time + RTO_interval: if (icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) tcp_rearm_rto(sk); 2) In tcp_clean_rtx_queue(), update the RTO to now + RTO_interval: if (flag & FLAG_ACKED) { tcp_rearm_rto(sk); 3) In tcp_ack() after tcp_fastretrans_alert() switch from RTO to TLP at now + RTO_interval: if (icsk->icsk_pending == ICSK_TIME_RETRANS) tcp_schedule_loss_probe(sk); In df92c8394e6e we removed that 3-phase dance, and instead directly set the TLP timer once: we set the TLP timer in cases like this to write_queue_head->packet_tx_time + RTO_interval. So if the RTT variance is small, then this means that this is setting the TLP timer to fire quite soon. This means if the ACK for the tail of the flight takes longer than an RTT to arrive (often due to delayed ACKs), then the TLP timer fires too quickly. Fixes: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-19usbnet: ipheth: fix potential null pointer dereference in ipheth_carrier_setGustavo A. R. Silva
_dev_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _dev_ has been null checked. Addresses-Coverity-ID: 1462020 Fixes: bb1b40c7cb86 ("usbnet: ipheth: prevent TX queue timeouts when device not ready") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-19gre6: use log_ecn_error module parameter in ip6_tnl_rcv()Alexey Kodanev
After commit 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") it's not used anywhere in the module, but previously was used in ip6gre_rcv(). Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-18ntb: intel: remove b2b memory window workaround for Skylake NTBDave Jiang
The workaround code is never used because Skylake NTB does not need it. Reported-by: Allen Hubbe <allen.hubbe@dell.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: make idt_89hpes_cfg constBhumika Goyal
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec_ntb: Update switchtec documentation with notes for NTBLogan Gunthorpe
The switchtec_ntb driver has a couple requirements on the switchec's hardware configuration so we add these notes to the documentation. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec_ntb: Add memory window supportLogan Gunthorpe
The Switchtec hardware has two types of memory windows: LUTs and Direct. The first area in each BAR is for LUT windows and the remaining area is for the direct region. The total number of LUT entries is set by a configuration setting in hardware and they all must be the same size. (This is fixed by switchtec_ntb to be 64K.) switchtec_ntb enables the LUTs only for the first BAR and enables the highest power of two possible. Seeing the LUTs are at the beginning of the BAR, the direct memory window's alignment is affected. Therefore, the maximum direct memory window size can not be greater than the number of LUTs times 64K. The direct window in other BARs will not have this restriction as the LUTs will not be enabled there. LUTs will only be exposed through the NTB API if the use_lut_mw parameter is set. Seeing the Switchtec hardware, by default, configures BARs to be 4G a module parameter is given to limit the size of the advertised memory windows. Higher layers tend to allocate the maximum BAR size and this has a tendency to fail when they try to allocate 4GB of contiguous memory. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec_ntb: Implement scratchpad registersLogan Gunthorpe
Seeing there is no dedicated hardware for this, we simply add these as entries in the shared memory window. Thus, we could support any number of them but 128 seems like enough, for now. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec_ntb: Implement doorbell registersLogan Gunthorpe
Pretty straightforward implementation of doorbell registers. The shift and mask were setup in an earlier patch and this just hooks up the appropriate portion of the IDB register as the local doorbells and the opposite portion of ODB as the peer doorbells. The DB mask is protected by a spinlock to avoid concurrent read-modify-write accesses. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec_ntb: Add link managementLogan Gunthorpe
switchtec_ntb checks for a link by looking at the shared memory window. If the magic number is correct and the other side indicates their link is enabled then we take the link to be up. Whenever we change our local link status we send a msg to the other side to check whether it's up and change their status. The current status is maintained in a flag so ntb_is_link_up can return quickly. We utilize Switchtec's link status notifier to also check link changes when the switch notices a port changes state. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec_ntb: Add skeleton NTB driverLogan Gunthorpe
Add a skeleton NTB driver which will be filled out in subsequent patches. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec_ntb: Initialize hardware for doorbells and messagesLogan Gunthorpe
Set up some hardware registers and creates interrupt service routines for the doorbells and messages. There are 64 doorbells in the switch that are shared between all partitions. The upper 4 doorbells are also shared with the messages and are therefore not used. Thus, this provides 28 doorbells for each partition. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec_ntb: Initialize hardware for memory windowsLogan Gunthorpe
Add the code to initialize the memory windows in the hardware. This includes setting up the requester ID table, and figuring out which BAR corresponds to which memory window. (Seeing the switch can be configured with any number of BARs.) Also, seeing the device doesn't have hardware for scratchpads or determining the link status, we create a shared memory window that has these features. A magic number with a version component will be used to determine if the other side's driver is actually up. The shared memory window also informs the other side of the size and count of the local memory windows. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec_ntb: Introduce initial NTB driverLogan Gunthorpe
Seeing the Switchtec NTB hardware shares the same endpoint as the management endpoint we utilize the class_interface API to register an NTB driver for every Switchtec device in the system that has the NTB class code. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: Add check and comment for link up to mw_count() and mw_get_align()Logan Gunthorpe
Adds a comment and a check to ntb_mw_get_align() so that it always fails if the function is called before the link is up. Also adds a comment to ntb_mw_count() to note that it may return 0 if it is called before the link is up. This is to prevent accidental mis-use in clients that are testing on hardware that this doesn't matter for. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: Ensure ntb_mw_get_align() is only called when the link is upLogan Gunthorpe
With Switchtec hardware it's impossible to get the alignment parameters for a peer's memory window until the peer's driver has configured its windows. Strictly speaking, the link doesn't have to be up for this, but the link being up is the only way the client can tell that the other side has been configured. This patch converts ntb_transport and ntb_perf to use this function after the link goes up. This simplifies these clients slightly because they no longer have to store the alignment parameters. It also tweaks ntb_tool so that peer_mw_trans will print zero if it is run before the link goes up. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec: Add link event notifier callbackLogan Gunthorpe
In order for the Switchtec NTB code to handle link change events we create a notifier callback in the switchtec code which gets called whenever an appropriate event interrupt occurs. In order to preserve userspace's ability to follow these events, we compare the event count with a stored copy from last time we checked. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec: Add NTB hardware register definitionsLogan Gunthorpe
There are two additional regions: ctrl and dbmsg. The first is for generic NTB control and memory windows. The second is for doorbells and message registers. This patch also adds a number of related constants for using these registers. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec: Export class symbol for use in upper layer driverLogan Gunthorpe
We export the class pointer symbol and add an extern define in the Switchtec header file. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18NTB: switchtec: Move structure definitions into a common headerLogan Gunthorpe
Create the switchtec.h header in include/linux with hardware defines and the switchtec_dev structure. Both moved directly from switchtec.c. This is a prep patch for creating an NTB driver for Switchtec. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18ntb: update maintainer list for Intel NTB driverDave Jiang
Removing Jon since he no longer works at Intel. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-18clean up x86 platform driver default valuesLinus Torvalds
The updates this merge window added several bogus default enablement for new features. We don't do that. If people want new behavior, they ask for it. One 'default n' was also removed as pointless. That's great, but there were eight other ones in the same file that were left alone. Fix it up. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-18Merge tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "Lots of good bugfixes, including: - fix a number of races in the NFSv4+ state code - fix some shutdown crashes in multiple-network-namespace cases - relax our 4.1 session limits; if you've an artificially low limit to the number of 4.1 clients that can mount simultaneously, try upgrading" * tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux: (22 commits) SUNRPC: Improve ordering of transport processing nfsd: deal with revoked delegations appropriately svcrdma: Enqueue after setting XPT_CLOSE in completion handlers nfsd: use nfs->ns.inum as net ID rpc: remove some BUG()s svcrdma: Preserve CB send buffer across retransmits nfds: avoid gettimeofday for nfssvc_boot time fs, nfsd: convert nfs4_file.fi_ref from atomic_t to refcount_t fs, nfsd: convert nfs4_cntl_odstate.co_odcount from atomic_t to refcount_t fs, nfsd: convert nfs4_stid.sc_count from atomic_t to refcount_t lockd: double unregister of inetaddr notifiers nfsd4: catch some false session retries nfsd4: fix cached replies to solo SEQUENCE compounds sunrcp: make function _svc_create_xprt static SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status nfsd: use ARRAY_SIZE nfsd: give out fewer session slots as limit approaches nfsd: increase DRC cache limit nfsd: remove unnecessary nofilehandle checks nfs_common: convert int to bool ...
2017-11-18Merge tag 'platform-drivers-x86-v4.15-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: "Here is the collected material against Platform Drivers x86 subsystem. It's rather bit busy cycle for PDx86, mostly due to Dell SMBIOS driver activity For this cycle we have quite an update for the Dell SMBIOS driver including WMI work to provide an interface for SMBIOS tokens via sysfs and WMI support for 2017+ Dell laptop models. SMM dispatcher code is split into a separate driver followed by a new WMI dispatcher. The latter provides a character device interface to user space. The git history also contains a merge of immutable branch from Wolfram Sang in order to apply a dependent fix to the Intel CherryTrail Battery Management driver. Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0 support is added for Intel Skylake. Peaq WMI hotkeys driver gets its own maintainer and white list of supported models. Silead DMI is expanded to support few additional platforms. Tablet mode via GMMS ACPI method is added to support some ThinkPad tablets. new driver: - Add driver to force WMI Thunderbolt controller power status asus-wmi: - Add lightbar led support dell-laptop: - Allocate buffer before rfkill use dell-smbios: - fix string overflow - Add filtering support - Introduce dispatcher for SMM calls - Add a sysfs interface for SMBIOS tokens - only run if proper oem string is detected - Prefix class/select with cmd_ - Add pr_fmt definition to driver dell-smbios-smm: - test for WSMT dell-smbios-wmi: - release mutex lock on WMI call failure - introduce userspace interface - Add new WMI dispatcher driver dell-smo8800: - remove redundant assignments to byte_data dell-wmi: - don't check length returned - clean up wmi descriptor check - increase severity of some failures - Do not match on descriptor GUID modalias - Label driver as handling notifications dell-*wmi*: - Relay failed initial probe to dependent drivers dell-wmi-descriptor: - check if memory was allocated - split WMI descriptor into it's own driver fujitsu-laptop: - Fix radio LED detection - Don't oops when FUJ02E3 is not presnt hp_accel: - Add quirk for HP ProBook 440 G4 hp-wmi: - Fix tablet mode detection for convertibles ideapad-laptop: - Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list intel_cht_int33fe: - Update fusb302 type string, add properties - make a couple of local functions static - Work around BIOS bug on some devices intel-hid: - Power button suspend on Dell Latitude 7275 intel_ips: - Convert timers to use timer_setup() - Remove FSF address from GPL notice - Remove unneeded fields and label - Keep pointer to struct device - Use PCI_VDEVICE() macro - Switch to new PCI IRQ allocation API - Simplify error handling via devres API intel_pmc_ipc: - Revert Use MFD framework to create dependent devices - Use MFD framework to create dependent devices - Use spin_lock to protect GCR updates - Use devm_* calls in driver probe function intel_punit_ipc: - Fix resource ioremap warning intel_telemetry: - Remove useless default in Kconfig - Add needed inclusion - cleanup redundant headers - Fix typos - Fix load failure info intel_telemetry_debugfs: - Use standard ARRAY_SIZE() macro intel_turbo_max_3: - Add Skylake platform intel-wmi-thunderbolt: - Silence error cases mlx-platform: - make a couple of structures static peaq_wmi: - Fix missing terminating entry for peaq_dmi_table peaq-wmi: - Remove unnecessary checks from peaq_wmi_exit - Add DMI check before binding to the WMI interface - Revert Blacklist Lenovo ideapad 700-15ISK - Blacklist Lenovo ideapad 700-15ISK silead_dmi: - Add silead, home-button property to some tablets - Add entry for the Digma e200 tablet - Fix GP-electronic T701 entry - Add entry for the Chuwi Hi8 Pro tablet sony-laptop: - Drop variable assignment in sony_nc_setup_rfkill() - Fix error handling in sony_nc_setup_rfkill() thinkpad_acpi: - Implement tablet mode using GMMS method tools/wmi: - add a sample for dell smbios communication over WMI wmi: - release mutex on module acquistion failure - create userspace interface for drivers - Don't allow drivers to get each other's GUIDs - Add new method wmidev_evaluate_method - Destroy on cleanup rather than unregister - Cleanup exit routine in reverse order of init - Sort include list" * tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits) platform/x86: silead_dmi: Add silead, home-button property to some tablets platform/x86: dell-laptop: Allocate buffer before rfkill use platform/x86: dell-*wmi*: Relay failed initial probe to dependent drivers platform/x86: dell-wmi-descriptor: check if memory was allocated platform/x86: Revert intel_pmc_ipc: Use MFD framework to create dependent devices platform/x86: dell-smbios-wmi: release mutex lock on WMI call failure platform/x86: wmi: release mutex on module acquistion failure platform/x86: dell-smbios: fix string overflow platform/x86: intel_pmc_ipc: Use MFD framework to create dependent devices platform/x86: intel_punit_ipc: Fix resource ioremap warning platform/x86: dell-smo8800: remove redundant assignments to byte_data platform/x86: hp-wmi: Fix tablet mode detection for convertibles platform/x86: intel_ips: Convert timers to use timer_setup() platform/x86: sony-laptop: Drop variable assignment in sony_nc_setup_rfkill() platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill() tools/wmi: add a sample for dell smbios communication over WMI platform/x86: dell-smbios-wmi: introduce userspace interface platform/x86: wmi: create userspace interface for drivers platform/x86: dell-smbios: Add filtering support platform/x86: dell-smbios-smm: test for WSMT ...
2017-11-18platform/x86: silead_dmi: Add silead, home-button property to some tabletsHans de Goede
Add "silead,home-button" property to entries for tablets which have a capacitive home button (typically a windows logo on the front). This new property is checked for by the new capacitive home button support in the silead touchscreen driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc updates from David Miller: 1) Add missing cmpxchg64() for 32-bit sparc. 2) Timer conversions from Allen Pais and Kees Cook. 3) vDSO support, from Nagarathnam Muthusamy. 4) Fix sparc64 huge page table walks based upon bug report by Al Viro, from Nitin Gupta. 5) Optimized fls() for T4 and above, from Vijay Kumar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix page table walk for PUD hugepages sparc64: Convert timers to user timer_setup() sparc64: convert mdesc_handle.refcnt from atomic_t to refcount_t sparc/led: Convert timers to use timer_setup() sparc64: Use sparc optimized fls and __fls for T4 and above sparc64: SPARC optimized __fls function sparc64: SPARC optimized fls function sparc64: Define SPARC default __fls function sparc64: Define SPARC default fls function vDSO for sparc sparc32: Add cmpxchg64(). sbus: char: Move D7S_MINOR to include/linux/miscdevice.h sparc: time: Remove unneeded linux/miscdevice.h include sparc64: mmu_context: Add missing include files
2017-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Revert regression inducing change to the IPSEC template resolver, from Steffen Klassert. 2) Peeloffs can cause the wrong sk to be waken up in SCTP, fix from Xin Long. 3) Min packet MTU size is wrong in cpsw driver, from Grygorii Strashko. 4) Fix build failure in netfilter ctnetlink, from Arnd Bergmann. 5) ISDN hisax driver checks pnp_irq() for errors incorrectly, from Arvind Yadav. 6) Fix fealnx driver build failure on MIPS, from Huacai Chen. 7) Fix into leak in SCTP, the scope_id of socket addresses is not always filled in. From Eric W. Biederman. 8) MTU inheritance between physical function and representor fix in nfp driver, from Dirk van der Merwe. 9) Fix memory leak in rsi driver, from Colin Ian King. 10) Fix expiration and generation ID handling of cached ipv4 redirect routes, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) net: usb: hso.c: remove unneeded DRIVER_LICENSE #define ibmvnic: fix dma_mapping_error call ipvlan: NULL pointer dereference panic in ipvlan_port_destroy route: also update fnhe_genid when updating a route cache route: update fnhe_expires for redirect when the fnhe exists sctp: set frag_point in sctp_setsockopt_maxseg correctly rsi: fix memory leak on buf and usb_reg_buf net/netlabel: Add list_next_rcu() in rcu_dereference(). nfp: remove false positive offloads in flower vxlan nfp: register flower reprs for egress dev offload nfp: inherit the max_mtu from the PF netdev nfp: fix vlan receive MAC statistics typo nfp: fix flower offload metadata flag usage virto_net: remove empty file 'virtio_net.' net/sctp: Always set scope_id in sctp_inet6_skb_msgname fealnx: Fix building error on MIPS isdn: hisax: Fix pnp_irq's error checking for setup_teles3 isdn: hisax: Fix pnp_irq's error checking for setup_sedlbauer_isapnp isdn: hisax: Fix pnp_irq's error checking for setup_niccy isdn: hisax: Fix pnp_irq's error checking for setup_ix1micro ...
2017-11-17Merge tag 'hwlock-v4.15' of git://github.com/andersson/remoteprocLinus Torvalds
Pull hwspinlock update from Bjorn Andersson: "This changes the HWSPINLOCK core Kconfig option to bool, to aid when other core code depends on it" * tag 'hwlock-v4.15' of git://github.com/andersson/remoteproc: hwspinlock: Change hwspinlock to a bool
generated by cgit (git 2.34.1) at 2025-09-11 05:12:20 +0000