| Age | Commit message (Collapse) | Author |
|---|
|
If it fails to modify QP to RTR, dip_ctx will not be attached. And
during detroying QP, the invalid dip_ctx pointer will be accessed.
Fixes: faa62440a577 ("RDMA/hns: Fix different dgids mapping to the same dip_idx")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Due to HW limitation, the three region of WQE buffer must be mapped
and set to HW in a fixed order: SQ buffer, SGE buffer, and RQ buffer.
Currently when one region is zero-hop while the other two are not,
the zero-hop region will not be mapped. This violate the limitation
above and leads to address error.
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This reverts commit 417d8c47271d5cf1a705e997065873b2a9a36fd4.
With that patch the panel in the Tentacruel ASUS Chromebook CM14
(CM1402F) flickers. There are 1 or 2 times per second a black panel.
Stable Kernel 6.11.5 and mainline 6.12-rc4 works only when reverse
that patch.
Fixes: 417d8c47271d ("drm/mediatek: dsi: Correct calculation formula of PHY Timing")
Cc: stable@vger.kernel.org
Cc: Shuijing Li <shuijing.li@mediatek.com>
Reported-by: Jens Ziller <zillerbaer@gmx.de>
Closes: https://patchwork.kernel.org/project/dri-devel/patch/20240412031208.30688-1-shuijing.li@mediatek.com/
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241212001908.6056-1-chunkuang.hu@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The last use of is_server_using_iface() was removed in 2022 by
commit aa45dadd34e4 ("cifs: change iface_list from array to sorted linked
list")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Previously, deferred file handles were reused only for read
operations, this commit extends to reusing deferred handles
for write operations. By reusing these handles we can reduce
the need for open/close operations over the wire.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since the dynamic preemption has been enabled for PREEMPT_RT we have now
CONFIG_PREEMPT and CONFIG_PREEMPT_RT set simultaneously. This affects
the vermagic strings which comes now PREEMPT with PREEMPT_RT enabled.
The PREEMPT_RT module usually can not be loaded on a PREEMPT kernel
because some symbols are missing.
However if the symbols are fine then it continues and it crashes later.
The problem is that the struct module has a different layout and the
num_exentries or init members are at a different position leading to a
crash later on. This is not necessary caught by the size check in
elf_validity_cache_index_mod() because the mem member has an alignment
requirement of __module_memory_align which is big enough keep the total
size unchanged. Therefore we should keep the string accurate instead of
removing it.
Move the PREEMPT_RT check before the PREEMPT so that it takes precedence
if both symbols are enabled.
Fixes: 35772d627b55c ("sched: Enable PREEMPT_DYNAMIC for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20241205160602.3lIAsJRT@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
|
|
Pull KVM x86 fixes from Paolo Bonzini:
- Disable AVIC on SNP-enabled systems that don't allow writes to the
virtual APIC page, as such hosts will hit unexpected RMP #PFs in the
host when running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to
determine if a guest with protected register state is in 64-bit mode
(KVM's ABI is to assume such guests only make hypercalls in 64-bit
mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix
a regression with Windows guests, and because KVM's read-only
behavior appears to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed
given the existing SPTE. This fixes a benign WARN (other than the
WARN itself) due to unexpectedly replacing a writable SPTE with a
read-only SPTE.
- Emit a warning when KVM is configured with ignore_msrs=1 and also to
hide the MSRs that the guest is looking for from the kernel logs.
ignore_msrs can trick guests into assuming that certain processor
features are present, and this in turn leads to bogus bug reports.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: let it be known that ignore_msrs is a bad idea
KVM: VMX: don't include '<linux/find.h>' directly
KVM: x86/mmu: Treat TDP MMU faults as spurious if access is already allowed
KVM: SVM: Allow guest writes to set MSR_AMD64_DE_CFG bits
KVM: x86: Play nice with protected guests in complete_hypercall_exit()
KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed feature
|
|
KVM x86 fixes for 6.13:
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
|
|
When running KVM with ignore_msrs=1 and report_ignored_msrs=0, the user has
no clue that that the guest is being lied to. This may cause bug reports
such as https://gitlab.com/qemu-project/qemu/-/issues/2571, where enabling
a CPUID bit in QEMU caused Linux guests to try reading MSR_CU_DEF_ERR; and
being lied about the existence of MSR_CU_DEF_ERR caused the guest to assume
other things about the local APIC which were not true:
Sep 14 12:02:53 kernel: mce: [Firmware Bug]: Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.
Sep 14 12:02:53 kernel: unchecked MSR access error: RDMSR from 0x852 at rIP: 0xffffffffb548ffa7 (native_read_msr+0x7/0x40)
Sep 14 12:02:53 kernel: Call Trace:
...
Sep 14 12:02:53 kernel: native_apic_msr_read+0x20/0x30
Sep 14 12:02:53 kernel: setup_APIC_eilvt+0x47/0x110
Sep 14 12:02:53 kernel: mce_amd_feature_init+0x485/0x4e0
...
Sep 14 12:02:53 kernel: [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu
Without reported_ignored_msrs=0 at least the host kernel log will contain
enough information to avoid going on a wild goose chase. But if reports
about individual MSR accesses are being silenced too, at least complain
loudly the first time a VM is started.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-ID: <20241217070539.2433-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 19 are MM and 6 are non-MM.
The usual bunch of singletons and doubletons - please see the relevant
changelogs for details"
* tag 'mm-hotfixes-stable-2024-12-21-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm: huge_memory: handle strsep not finding delimiter
alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUG
alloc_tag: fix module allocation tags populated area calculation
mm/codetag: clear tags before swap
mm/vmstat: fix a W=1 clang compiler warning
mm: convert partially_mapped set/clear operations to be atomic
nilfs2: fix buffer head leaks in calls to truncate_inode_pages()
vmalloc: fix accounting with i915
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
fork: avoid inappropriate uprobe access to invalid mm
nilfs2: prevent use of deleted inode
zram: fix uninitialized ZRAM not releasing backing device
zram: refuse to use zero sized block device as backing device
mm: use clear_user_(high)page() for arch with special user folio handling
mm: introduce cpu_icache_is_aliasing() across all architectures
mm: add RCU annotation to pte_offset_map(_lock)
mm: correctly reference merged VMA
mm: use aligned address in copy_user_gigantic_page()
mm: use aligned address in clear_gigantic_page()
mm: shmem: fix ShmemHugePages at swapout
...
|
|
My tests run an allyesconfig build and it failed with the following errors:
LD [M] samples/kfifo/dma-example.ko
ld.lld: error: undefined symbol: nec7210_board_reset
ld.lld: error: undefined symbol: nec7210_read
ld.lld: error: undefined symbol: nec7210_write
It appears that some modules call the function nec7210_board_reset()
that is defined in nec7210.c. In an allyesconfig build, these other
modules are built in. But the file that holds nec7210_board_reset()
has:
obj-m += nec7210.o
Where that "-m" means it only gets built as a module. With the other
modules built in, they have no access to nec7210_board_reset() and the build
fails.
This isn't the only function. After fixing that one, I hit another:
ld.lld: error: undefined symbol: push_gpib_event
ld.lld: error: undefined symbol: gpib_match_device_path
Where push_gpib_event() was also used outside of the file it was defined
in, and that file too only was built as a module.
Since the directory that nec7210.c is only traversed when
CONFIG_GPIB_NEC7210 is set, and the directory with gpib_common.c is only
traversed when CONFIG_GPIB_COMMON is set, use those configs as the
option to build those modules. When it is an allyesconfig, then they
will both be built in and their functions will be available to the other
modules that are also built in.
Fixes: 3ba84ac69b53e ("staging: gpib: Add nec7210 GPIB chip driver")
Fixes: 9dde4559e9395 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove stale code in usr/include/headers_check.pl
- Fix issues in the user-mode-linux Debian package
- Fix false-positive "export twice" errors in modpost
* tag 'kbuild-fixes-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: distinguish same module paths from different dump files
kbuild: deb-pkg: Do not install maint scripts for arch 'um'
kbuild: deb-pkg: add debarch for ARCH=um
kbuild: Drop support for include/asm-<arch> in headers_check.pl
|
|
Pull BPF fixes from Daniel Borkmann:
- Fix inlining of bpf_get_smp_processor_id helper for !CONFIG_SMP
systems (Andrea Righi)
- Fix BPF USDT selftests helper code to use asm constraint "m" for
LoongArch (Tiezhu Yang)
- Fix BPF selftest compilation error in get_uprobe_offset when
PROCMAP_QUERY is not defined (Jerome Marchand)
- Fix BPF bpf_skb_change_tail helper when used in context of BPF
sockmap to handle negative skb header offsets (Cong Wang)
- Several fixes to BPF sockmap code, among others, in the area of
socket buffer accounting (Levi Zim, Zijian Zhang, Cong Wang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test bpf_skb_change_tail() in TC ingress
selftests/bpf: Introduce socket_helpers.h for TC tests
selftests/bpf: Add a BPF selftest for bpf_skb_change_tail()
bpf: Check negative offsets in __bpf_skb_min_len()
tcp_bpf: Fix copied value in tcp_bpf_sendmsg
skmsg: Return copied bytes in sk_msg_memcopy_from_iter
tcp_bpf: Add sk_rmem_alloc related logic for tcp_bpf ingress redirection
tcp_bpf: Charge receive socket buffer in bpf_tcp_ingress()
selftests/bpf: Fix compilation error in get_uprobe_offset()
selftests/bpf: Use asm constraint "m" for LoongArch
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a clang build issue with mediatec vcodec
- add missing variable initialization to dib3000mb write function
* tag 'media/v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some amd-pstate driver issues:
- Detect preferred core support in amd-pstate before driver
registration to avoid initialization ordering issues (K Prateek
Nayak)
- Fix issues with with boost numerator handling in amd-pstate leading
to inconsistently programmed CPPC max performance values (Mario
Limonciello)"
* tag 'pm-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies
cpufreq/amd-pstate: Store the boost numerator as highest perf again
cpufreq/amd-pstate: Detect preferred core support before driver registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues with the user thermal thresholds feature introduced in
this development cycle (Daniel Lezcano)"
* tag 'thermal-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/thresholds: Fix boundaries and detection routine
thermal/thresholds: Fix uapi header macros leading to a compilation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
|
|
Pull smb client fixes from Steve French:
- fix regression in display of write stats
- fix rmmod failure with network namespaces
- two minor cleanups
* tag '6.13-rc3-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: fix bytes written value in /proc/fs/cifs/Stats
smb: client: fix TCP timers deadlock after rmmod
smb: client: Deduplicate "select NETFS_SUPPORT" in Kconfig
smb: use macros instead of constants for leasekey size and default cifsattrs value
|
|
Pull NFS client fixes from Trond Myklebust:
- NFS/pnfs: Fix a live lock between recalled layouts and layoutget
- Fix a build warning about an undeclared symbol 'nfs_idmap_cache_timeout'
* tag 'nfs-for-6.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
fs/nfs: fix missing declaration of nfs_idmap_cache_timeout
NFS/pnfs: Fix a live lock between recalled layouts and layoutget
|
|
Pull ceph fixes from Ilya Dryomov:
"A handful of important CephFS fixes from Max, Alex and myself: memory
corruption due to a buffer overrun, potential infinite loop and
several memory leaks on the error paths. All but one marked for
stable"
* tag 'ceph-for-6.13-rc4' of https://github.com/ceph/ceph-client:
ceph: allocate sparse_ext map only for sparse reads
ceph: fix memory leak in ceph_direct_read_write()
ceph: improve error handling and short/overflow-read logic in __ceph_sync_read()
ceph: validate snapdirname option length when mounting
ceph: give up on paths longer than PATH_MAX
ceph: fix memory leaks in __ceph_sync_read()
|
|
Since commit 13b25489b6f8 ("kbuild: change working directory to external
module directory with M="), module paths are always relative to the top
of the external module tree.
The module paths recorded in Module.symvers are no longer globally unique
when they are passed via KBUILD_EXTRA_SYMBOLS for building other external
modules, which may result in false-positive "exported twice" errors.
Such errors should not occur because external modules should be able to
override in-tree modules.
To address this, record the dump file path in struct module and check it
when searching for a module.
Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/eb21a546-a19c-40df-b821-bbba80f19a3d@nvidia.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
|
|
Stop installing Debian maintainer scripts when building a
user-mode-linux Debian package.
Debian maintainer scripts are used for e.g. requesting rebuilds of
initrd, rebuilding DKMS modules and updating of grub configuration. As
all of this is not relevant for UML but also may lead to failures while
processing the kernel hooks, do no more install maintainer scripts for
the UML package.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
'make ARCH=um bindeb-pkg' shows the following warning.
$ make ARCH=um bindeb-pkg
[snip]
GEN debian
** ** ** WARNING ** ** **
Your architecture doesn't have its equivalent
Debian userspace architecture defined!
Falling back to the current host architecture (amd64).
Please add support for um to ./scripts/package/mkdebian ...
This commit hard-codes i386/amd64 because UML is only supported for x86.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
"include/asm-<arch>" was replaced by "arch/<arch>/include/asm" a long
time ago. All assembler header files are now included using
"#include <asm/*>", so there is no longer a need to rewrite paths.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
clk_imx8mp_audiomix_reset_controller_register() in the
"if !CONFIG_RESET_CONTROLLER" branch had the first
argument missing. It is an empty function for this branch
so it wasn't immediately apparent.
Fixes: 6f0e817175c5 ("clk: imx: clk-audiomix: Add reset controller")
Cc: <stable@vger.kernel.org> # 6.12.x
Signed-off-by: Nikolaus Voss <nv@vosn.de>
Link: https://lore.kernel.org/r/20241219105447.889CB11FE@mail.steuer-voss.de
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Similarly to the previous test, we also need a test case to cover
positive offsets as well, TC is an excellent hook for this.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-5-xiyou.wangcong@gmail.com
|
|
Pull socket helpers out of sockmap_helpers.h so that they can be reused
for TC tests as well. This prepares for the next patch.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-4-xiyou.wangcong@gmail.com
|
|
As requested by Daniel, we need to add a selftest to cover
bpf_skb_change_tail() cases in skb_verdict. Here we test trimming,
growing and error cases, and validate its expected return values and the
expected sizes of the payload.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-3-xiyou.wangcong@gmail.com
|
|
skb_network_offset() and skb_transport_offset() can be negative when
they are called after we pull the transport header, for example, when
we use eBPF sockmap at the point of ->sk_data_ready().
__bpf_skb_min_len() uses an unsigned int to get these offsets, this
leads to a very large number which then causes bpf_skb_change_tail()
failed unexpectedly.
Fix this by using a signed int to get these offsets and ensure the
minimum is at least zero.
Fixes: 5293efe62df8 ("bpf: add bpf_skb_change_tail helper")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-2-xiyou.wangcong@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix a sparse warning in the arm64 signal code dealing with the user
shadow stack register, GCSPR_EL0"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/signal: Silence sparse warning storing GCSPR_EL0
|
|
bpf kselftest sockhash::test_txmsg_cork_hangs in test_sockmap.c triggers a
kernel NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000008
? __die_body+0x6e/0xb0
? __die+0x8b/0xa0
? page_fault_oops+0x358/0x3c0
? local_clock+0x19/0x30
? lock_release+0x11b/0x440
? kernelmode_fixup_or_oops+0x54/0x60
? __bad_area_nosemaphore+0x4f/0x210
? mmap_read_unlock+0x13/0x30
? bad_area_nosemaphore+0x16/0x20
? do_user_addr_fault+0x6fd/0x740
? prb_read_valid+0x1d/0x30
? exc_page_fault+0x55/0xd0
? asm_exc_page_fault+0x2b/0x30
? splice_to_socket+0x52e/0x630
? shmem_file_splice_read+0x2b1/0x310
direct_splice_actor+0x47/0x70
splice_direct_to_actor+0x133/0x300
? do_splice_direct+0x90/0x90
do_splice_direct+0x64/0x90
? __ia32_sys_tee+0x30/0x30
do_sendfile+0x214/0x300
__se_sys_sendfile64+0x8e/0xb0
__x64_sys_sendfile64+0x25/0x30
x64_sys_call+0xb82/0x2840
do_syscall_64+0x75/0x110
entry_SYSCALL_64_after_hwframe+0x4b/0x53
This is caused by tcp_bpf_sendmsg() returning a larger value(12289) than
size (8192), which causes the while loop in splice_to_socket() to release
an uninitialized pipe buf.
The underlying cause is that this code assumes sk_msg_memcopy_from_iter()
will copy all bytes upon success but it actually might only copy part of
it.
This commit changes it to use the real copied bytes.
Signed-off-by: Levi Zim <rsworktech@outlook.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241130-tcp-bpf-sendmsg-v1-2-bae583d014f3@outlook.com
|
|
Previously sk_msg_memcopy_from_iter returns the copied bytes from the
last copy_from_iter{,_nocache} call upon success.
This commit changes it to return the total number of copied bytes on
success.
Signed-off-by: Levi Zim <rsworktech@outlook.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241130-tcp-bpf-sendmsg-v1-1-bae583d014f3@outlook.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix reporting of negative temperature, current, and voltage values in
the tmp513 driver
* tag 'hwmon-for-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (tmp513) Fix interpretation of values of Temperature Result and Limit Registers
hwmon: (tmp513) Fix Current Register value interpretation
hwmon: (tmp513) Fix interpretation of values of Shunt Voltage and Limit Registers
|
|
Google Juniper and other Chromebook platforms have a very old bootloader
which populates /firmware node without proper address/size-cells leading
to warnings:
Missing '#address-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Hardware name: Google juniper sku16 board (DT)
...
Missing '#size-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:133 of_bus_n_size_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Tainted: [W]=WARN
Hardware name: Google juniper sku16 board (DT)
These platform won't receive updated bootloader/firmware, so add an
exclusion for platforms with a "coreboot" compatible node. While this is
wider than necessary, that's the easiest fix and it doesn't doesn't
matter if we miss checking other platforms using coreboot.
We may revisit this later and address with a fixup to the DT itself.
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/Z0NUdoG17EwuCigT@sashalap/
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Minor cleanups for bdev/nvme using the helpers introduced
- Revert of a deadlock fix that still needs more work
- Fix a UAF of hctx in the cpu hotplug code
* tag 'block-6.13-20241220' of git://git.kernel.dk/linux:
block: avoid to reuse `hctx` not removed from cpuhp callback list
block: Revert "block: Fix potential deadlock while freezing queue and acquiring sysfs_lock"
nvme: use blk_validate_block_size() for max LBA check
block/bdev: use helper for max block size check
|
|
support"
David Howells <dhowells@redhat.com> says:
This set of patches is primarily about two things: improving read
performance and supporting monolithic single-blob objects that have to be
read/written as such (e.g. AFS directory contents). The implementation of
the two parts is interwoven as each makes the other possible.
READ PERFORMANCE
================
The read performance improvements are intended to speed up some loss of
performance detected in cifs and to a lesser extend in afs. The problem is
that we queue too many work items during the collection of read results:
each individual subrequest is collected by its own work item, and then they
have to interact with each other when a series of subrequests don't exactly
align with the pattern of folios that are being read by the overall
request.
Whilst the processing of the pages covered by individual subrequests as
they complete potentially allows folios to be woken in parallel and with
minimum delay, it can shuffle wakeups for sequential reads out of order -
and that is the most common I/O pattern.
The final assessment and cleanup of an operation is then held up until the
last I/O completes - and for a synchronous sequential operation, this means
the bouncing around of work items just adds latency.
Two changes have been made to make this work:
(1) All collection is now done in a single "work item" that works
progressively through the subrequests as they complete (and also
dispatches retries as necessary).
(2) For readahead and AIO, this work item be done on a workqueue and can
run in parallel with the ultimate consumer of the data; for
synchronous direct or unbuffered reads, the collection is run in the
application thread and not offloaded.
Functions such as smb2_readv_callback() then just tell netfslib that the
subrequest has terminated; netfslib does a minimal bit of processing on the
spot - stat counting and tracing mostly - and then queues/wakes up the
worker. This simplifies the logic as the collector just walks sequentially
through the subrequests as they complete and walks through the folios, if
buffered, unlocking them as it goes. It also keeps to a minimum the amount
of latency injected into the filesystem's low-level I/O handling
The way netfs supports filesystems using the deprecated PG_private_2 flag
is changed: folios are flagged and added to a write request as they
complete and that takes care of scheduling the writes to the cache. The
originating read request can then just unlock the pages whatever happens.
SINGLE-BLOB OBJECT SUPPORT
==========================
Single-blob objects are files for which the content of the file must be
read from or written to the server in a single operation because reading
them in parts may yield inconsistent results. AFS directories are an
example of this as there exists the possibility that the contents are
generated on the fly and would differ between reads or might change due to
third party interference.
Such objects will be written to and retrieved from the cache if one is
present, though we allow/may need to propose multiple subrequests to do so.
The important part is that read from/write to the *server* is monolithic.
Single blob reading is, for the moment, fully synchronous and does result
collection in the application thread and, also for the moment, the API is
supplied the buffer in the form of a folio_queue chain rather than using
the pagecache.
AFS CHANGES
===========
This series makes a number of changes to the kafs filesystem, primarily in
the area of directory handling:
(1) AFS's FetchData RPC reply processing is made partially asynchronous
which allows the netfs_io_request's outstanding operation counter to
be removed as part of reducing the collection to a single work item.
(2) Directory and symlink reading are plumbed through netfslib using the
single-blob object API and are now cacheable with fscache. This also
allows the afs_read struct to be eliminated and netfs_io_subrequest to
be used directly instead.
(3) Directory and symlink content are now stored in a folio_queue buffer
rather than in the pagecache. This means we don't require the RCU
read lock and xarray iteration to access it, and folios won't randomly
disappear under us because the VM wants them back.
There are some downsides to this, though: the storage folios are no
longer known to the VM, drop_caches can't flush them, the folios are
not migrateable. The inode must also be marked dirty manually to get
the data written to the cache in the background.
(4) The vnode operation lock is changed from a mutex struct to a private
lock implementation. The problem is that the lock now needs to be
dropped in a separate thread and mutexes don't permit that.
(5) When a new directory or symlink is created, we now initialise it
locally and mark it valid rather than downloading it (we know what
it's likely to look like).
(6) We now use the in-directory hashtable to reduce the number of entries
we need to scan when doing a lookup. The edit routines have to
maintain the hash chains.
(7) Cancellation (e.g. by signal) of an async call after the rxrpc_call
has been set up is now offloaded to the worker thread as there will be
a notification from rxrpc upon completion. This avoids a double
cleanup.
SUPPORTING CHANGES
==================
To support the above some other changes are also made:
(1) A "rolling buffer" implementation is created to abstract out the two
separate folio_queue chaining implementations I had (one for read and
one for write).
(2) Functions are provided to create/extend a buffer in a folio_queue
chain and tear it down again. This is used to handle AFS directories,
but could also be used to create bounce buffers for content crypto and
transport crypto.
(3) The was_async argument is dropped from netfs_read_subreq_terminated().
Instead we wake the read collection work item by either queuing it or
waking up the app thread.
(4) We don't need to use BH-excluding locks when communicating between the
issuing thread and the collection thread as neither of them now run in
BH context.
MISCELLANY
==========
Also included are a number of new tracepoints; a split of the netfslib
write collection code to put retrying into its own file (it gets more
complicated with content encryption).
There are also some minor fixes AFS included, including fixing the AFS
directory format struct layout, reducing some directory over-invalidation
and making afs_mkdir() translate EEXIST to ENOTEMPY (which is not available
on all systems the servers support).
Finally, there's a patch to try and detect entry into the folio unlock
function with no folio_queue structs in the buffer (which isn't allowed in
the cases that can get there). This is a debugging patch, but should be
minimal overhead.
* patches from https://lore.kernel.org/r/20241216204124.3752367-1-dhowells@redhat.com: (31 commits)
netfs: Report on NULL folioq in netfs_writeback_unlock_folios()
afs: Add a tracepoint for afs_read_receive()
afs: Locally initialise the contents of a new symlink on creation
afs: Use the contained hashtable to search a directory
afs: Make afs_mkdir() locally initialise a new directory's content
netfs: Change the read result collector to only use one work item
afs: Make {Y,}FS.FetchData an asynchronous operation
afs: Fix cleanup of immediately failed async calls
afs: Eliminate afs_read
afs: Use netfslib for symlinks, allowing them to be cached
afs: Use netfslib for directories
afs: Make afs_init_request() get a key if not given a file
netfs: Add support for caching single monolithic objects such as AFS dirs
netfs: Add functions to build/clean a buffer in a folio_queue
afs: Add more tracepoints to do with tracking validity
cachefiles: Add auxiliary data trace
cachefiles: Add some subrequest tracepoints
netfs: Remove some extraneous directory invalidations
afs: Fix directory format encoding struct
afs: Fix EEXIST error returned from afs_rmdir() to be ENOTEMPTY
...
Link: https://lore.kernel.org/r/20241216204124.3752367-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It seems that it's possible to get to netfs_writeback_unlock_folios() with
an empty rolling buffer during buffered writes. This should not be
possible as the rolling buffer is initialised as the write request is set
up and thereafter maintains at least one folio_queue struct therein until
it gets destroyed. This allows lockless addition and removal of
folio_queue structs in the buffer because, unlike with a ring buffer, the
producer and consumer each only need to look at and alter one pointer into
the buffer.
Now, the rolling buffer is only used for buffered I/O operations as
netfs_collect_write_results() should only call
netfs_writeback_unlock_folios() if the request is of origin type
NETFS_WRITEBACK, NETFS_WRITETHROUGH or NETFS_PGPRIV2_COPY_TO_CACHE.
So it would seem that one of the following occurred: (1) I/O started before
the request was fully initialised, (2) the origin got switched mid-flow or
(3) the request has already been freed and this is a UAF error. I think
the last is the most likely.
Make netfs_writeback_unlock_folios() report information about the request
and subrequests if folioq is seen to be NULL to try and help debug this,
throw a warning and return.
Note that this does not try to fix the problem.
Reported-by: syzbot+af5c06208fa71bf31b16@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=af5c06208fa71bf31b16
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/ZxshMEW4U7MTgQYa@gmail.com/
Link: https://lore.kernel.org/r/20241216204124.3752367-33-dhowells@redhat.com
cc: Chang Yu <marcus.yu.56@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a tracepoint for afs_read_receive() to allow potential missed wakeups
to be debugged.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-32-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since we know what the contents of a symlink will be when we create it on
the server, initialise its contents locally too to avoid the need to
download it.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-31-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Each directory image contains a hashtable with 128 buckets to speed up
searching. Currently, kafs does not use this, but rather iterates over all
the occupied slots in the image as it can share this with readdir.
Switch kafs to use the hashtable for lookups to reduce the latency. Care
must be taken that the hash chains are acyclic.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-30-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Initialise a new directory's content when it is created by mkdir locally
rather than downloading the content from the server as we can predict what
it's going to look like.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-29-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Change the way netfslib collects read results to do all the collection for
a particular read request using a single work item that walks along the
subrequest queue as subrequests make progress or complete, unlocking folios
progressively rather than doing the unlock in parallel as parallel requests
come in.
The code is remodelled to be more like the write-side code, though only
using a single stream. This makes it more directly comparable and thus
easier to duplicate fixes between the two sides.
This has a number of advantages:
(1) It's simpler. There doesn't need to be a complex donation mechanism
to handle mismatches between the size and alignment of subrequests and
folios. The collector unlocks folios as the subrequests covering each
complete.
(2) It should cause less scheduler overhead as there's a single work item
in play unlocking pages in parallel when a read gets split up into a
lot of subrequests instead of one per subrequest.
Whilst the parallellism is nice in theory, in practice, the vast
majority of loads are sequential reads of the whole file, so
committing a bunch of threads to unlocking folios out of order doesn't
help in those cases.
(3) It should make it easier to implement content decryption. A folio
cannot be decrypted until all the requests that contribute to it have
completed - and, again, most loads are sequential and so, most of the
time, we want to begin decryption sequentially (though it's great if
the decryption can happen in parallel).
There is a disadvantage in that we're losing the ability to decrypt and
unlock things on an as-things-arrive basis which may affect some
applications.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-28-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make FS.FetchData and YFS.FetchData an asynchronous operation in that the
request is queued in AF_RXRPC and then we return to the caller rather than
waiting. Processing of the returning packets is then done inline if it's a
synchronous VFS/VM call (readdir, read_folio, sync DIO, prep for write) or
offloaded to a workqueue if asynchronous VM calls (eg. readahead, async
DIO).
This reduces the chain of workqueues invoking workqueues and cuts out some
of the overhead, driving rxrpc data extraction and netfslib read collection
from a thread that's going to block to completion anyway if possible.
The ->done() call op is also split with ->immediate_cancel() handling the
cancellation on failure to begin the call and ->done() handling the rest.
This means that the AFS async FetchData code doesn't try to terminate the
netfs subrequest twice.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-26-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If we manage to begin an async call, but fail to transmit any data on it
due to a signal, we then abort it which causes a race between the
notification of call completion from rxrpc and our attempt to cancel the
notification. The notification will be necessary, however, for async
FetchData to terminate the netfs subrequest.
However, since we get a notification from rxrpc upon completion of a call
(aborted or otherwise), we can just leave it to that.
This leads to calls not getting cleaned up, but appearing in
/proc/net/rxrpc/calls as being aborted with code 6.
Fix this by making the "error_do_abort:" case of afs_make_call() abort the
call and then abandon it to the notification handler.
Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-25-dhowells@redhat.com
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that directory and symlink reads go through netfslib, the afs_read
struct is mostly redundant with almost all data duplicated in the
netfs_io_request and netfs_io_subrequest structs that are also available
any time we're doing a fetch.
Eliminate afs_read by moving the one field we still need there to the
afs_call struct (we may be given a different amount of data than what we
asked for and have to track what remains of that) and using the
netfs_io_subrequest directly instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-24-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
