summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-13kmsg_dump: constrain mtdoops and ramoops to perform their actions only for ↵Seiji Aguchi
KMSG_DUMP_PANIC This series aims to develop logging facility for enterprise use. It is important to save kernel messages reliably on enterprise system because they are helpful for diagnosing system. This series add kmsg_dump() to the paths loosing kernel messages. The use case is the following. [Use case of reboot/poweroff/halt/emergency_restart] My company has often experienced the followings in our support service. - Customer's system suddenly reboots. - Customers ask us to investigate the reason of the reboot. We recognize the fact itself because boot messages remain in /var/log/messages. However, we can't investigate the reason why the system rebooted, because the last messages don't remain. And off course we can't explain the reason. We can solve above problem with this patch as follows. Case1: reboot with command - We can see "Restarting system with command:" or ""Restarting system.". Case2: halt with command - We can see "System halted.". Case3: poweroff with command - We can see " Power down.". Case4: emergency_restart with sysrq. - We can see "Sysrq:" outputted in __handle_sysrq(). Case5: emergency_restart with softdog. - We can see "Initiating system reboot" in watchdog_fire(). So, we can distinguish the reason of reboot, poweroff, halt and emergency_restart. If customer executed reboot command, you may think the customer should know the fact. However, they often claim they don't execute the command when they rebooted system by mistake. No message remains on the current Linux kernel, so we can't show the proof to the customer. This patch improves this situation. This patch: Alters mtdoops and ramoops to perform their actions only for KMSG_DUMP_PANIC, KMSG_DUMP_OOPS and KMSG_DUMP_KEXEC because they would like to log crashes only. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Reviewed-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13uml: use simple_write_to_buffer()Akinobu Mita
Simplify write file operation for mmapper by using simple_write_to_buffer(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13uml: mmapper_kern needs MODULE_LICENSERandy Dunlap
Add missing MODULE_LICENSE(): WARNING: modpost: missing MODULE_LICENSE() in arch/um/drivers/mmapper_kern.o Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Greg Lonnon <glonnon@ridgerun.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13arch/um/drivers/line.c: safely iterate over list of winch handlersWill Newton
unregister_winch() should use list_for_each_safe(), as it can delete from the list. Signed-off-by: Will Newton <will.newton@gmail.com> Cc: richard -rw- weinberger <richard.weinberger@gmail.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13um: mark CONFIG_HIGHMEM as brokenRichard Weinberger
Currently CONFIG_HIGHMEM is broken on User Mode Linux. I'm not sure if it worked ever. It doesn't compile and this breaks randomconfig testing. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13drivers/video/backlight/l4f00242t03.c: fix reset sequenceAlberto Panizzo
The reset command is part of the init sequence and it take effect only if the lcd is powered. The effect of the bug was that the sequence: set lcd power_state to FB_BLANK_POWERDOWN set lcd power_state to FB_BLANK_UNBLANK Did not produced a complete reboot of the LCD which was showing fuzzy colours. This was not experienced before implementing correctly all the LCD power states with the patch [1]. Since before the patch [1] the regulators were not touched and the LCD shutdown was reached with a register write. After the patch [1] a complete boot sequence with an initial reset is needed for the display every time the LCD is powered up. drivers-video-backlight-l4f00242t03c-full-implement-fb-power-states-for-this-lcd.patch Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13drivers/video/backlight/l4f00242t03.c: prevent unbalanced calls to regulator ↵Alberto Panizzo
enable/disable Otherwise a double call to: $ echo 4 > /sys/class/lcd/l4f00242t03/lcd_power Will, the first power down the lcd and regulators correctly and the second produce an unbalanced call to regulator disable. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13drivers/video/backlight/l4f00242t03.c: full implement fb power states for ↵Alberto Panizzo
this lcd Complete the support of fb power states managing correctly the regulators bound to this driver. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13drivers/video/backlight/l4f00242t03.c: make 1-bit signed field unsignedMariusz Kozlowski
Fixes sparse warning: drivers/video/backlight/l4f00242t03.c:28:21: error: dubious one-bit signed bitfield Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: add output inversion option to backlight triggerJanusz Krzysztofik
Extend the LED backlight tirgger driver with an option that allows for inverting the trigger output polarity. With the invertion option provided, I (ab)use the backlight trigger for driving a LED that indicates LCD display blank condtition on my Amstrad Delta videophone. Since the machine has no dedicated power LED, it was not possible to distinguish if the display was blanked, or the machine was turned off, without touching it. The invert sysfs control is patterned after a similiar function of the GPIO trigger driver. [akpm@linux-foundation.org: make output match input, tighten input checking] [akpm@linux-foundation.org: make output match input, tighten input checking] Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds-lp5521: modify the way of setting led device nameArun Murthy
Currently the led device name is fetched from the device_type in I2C_BOARD_INFO which comes from the platform data. This name is in turn used to create an entry in sysfs. If there exists two or more lp5521 on a particular platform, the device_type in I2C_BOARD_INFO has to be the same, else lp5521 driver probe wont be called and if used so, results in run time warning "cannot create sysfs with same name" and hence a failure. The name that is used to create sysfs entry is to be passed by the struct led_platform_data. Hence adding an element of type const char * and change in lp5521 driver to use this name in creating the led device if present else use the name obtained by I2C_BOARD_INFO. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: lp5521: fix circular lockingSamu Onkalo
Driver contained possibility for circular locking. One lock is held by sysfs-core and another one by the driver itself. This happened when the driver created or removed sysfs entries dynamically. There is no real need to do those operations. Now all the sysfs entries are created at probe and removed at removal. Engine load sysfs entries are now visible all the time. However, access to the entries fails if the engine is disabled or running. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: lp5523: fix circular lockingSamu Onkalo
Driver contained possibility for circular locking. One lock is held by sysfs-core and another one by the driver itself. This happened when the driver created or removed sysfs entries dynamically. There is no real need to do those operations. Now all the sysfs entries are created at probe and removed at removal. Engine load and mux configuration sysfs entries are now visible all the time. However, access to the entries fails if the engine is disabled or running. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: leds-lp5523: modify the way of setting led device nameSamu Onkalo
Currently all leds channels begins with string lp5523. Patch adds a possibility to provide name via platform data. This makes it possible to have several chips without overlapping sysfs names. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: leds-pca9532 cleanupsAxel Lin
- Remove unneeded input_free_device() after input_unregister_device(). - Add pca9532_destroy_devices() function for destroy devices. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13drivers/leds/leds-lp5521.c: fix potential buffer overflowVasiliy Kulikov
The code doesn't check first sscanf() return value. If first sscanf() failed then c contains some garbage. It might lead to reading uninitialised stack data in the second sscanf() call. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13fs/ext4/inode.c: use pr_warn_ratelimited()Andrew Morton
pr_warning_ratelimited() doesn't exist. Also include printk.h, which defines these things. Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13omap4: Fix ULPI PHY init for ES1.0 SDPTony Lindgren
Commit 6aa85a5ae610106d89e50c7e1f760c56d12f9bc4 (omap4: 4430sdp: enable the ehci port on 4430SDP) added code to enable EHCI support on 4430sdp board. Looks like the ULPI pin does not seem to be muxed properly on ES1.0 SDP and this causes the system to reboot when the ULPI PHY is enabled. Fix this by muxing the pin, this is the same setting for both ES1.0 and ES2.0. Also add checking for gpio_request. Cc: Keshava Munegowda <keshava_mgowda@ti.com Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-13firewire: ohci: fix compilation on arches without PAGE_KERNEL_ROClemens Ladisch
PAGE_KERNEL_RO is not available on all architectures, so its use in the new AR code broke compilation on sparc64. Because the read-only mapping was just a debugging aid, just use PAGE_KERNEL instead. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> James Bottomley wrote: > On Thu, 2011-01-13 at 08:27 +0100, Clemens Ladisch wrote: >> firewire: ohci: fix compilation on arches without PAGE_KERNEL_RO, e.g. sparc >> >> PAGE_KERNEL_RO is not available on all architectures, so its use in the >> new AR code broke compilation on sparc64. >> >> Because the R/O mapping is only used to catch drivers that try to write >> to the reception buffer and not actually required for correct operation, >> we can just use a normal PAGE_KERNEL mapping where _RO is not available. [...] >> +/* >> + * For archs where PAGE_KERNEL_RO is not supported; >> + * mapping the AR buffers readonly for the CPU is just a debugging aid. >> + */ >> +#ifndef PAGE_KERNEL_RO >> +#define PAGE_KERNEL_RO PAGE_KERNEL >> +#endif > > This might cause interesting issues on sparc64 if it ever acquired a > PAGE_KERNEL_RO. Sparc64 has extern pgprot_t for it's PAGE_KERNEL types > rather than #defines, so the #ifdef check wouldn't see this. > > I think either PAGE_PROT_RO becomes part of our arch API (so all > architectures are forced to add it), or, if it's not part of the API, > ohci isn't entitled to use it. The latter seems simplest since you have > no real use for write protection anyway. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-01-13ALSA: hda - Add fixup-call in init callbackTakashi Iwai
In some cases, the fix-up is required in the init callback to be called both at the first initialization and at the resume. The new action type ALC_FIXUP_ACT_INIT is used for this case. So far, only ALC275_FIXUP_SONY_HWEQ uses this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-13ALSA: hda - Reorganize fixup structure for RealtekTakashi Iwai
Instead of keeping various data types in a single record, put the type field and keep a single value in each entry, but allows chaining multiple fixup entries. This allows more flexible data management (see ALC275_FIXUP_SONY_HWEQ for example). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-13Merge branch 'for-2.6.38/event-handling' into for-2.6.38/coreJens Axboe
2011-01-13ALSA: hda - Apply Sony VAIO hweq fixup only onceTakashi Iwai
This should be applied also only once as a part of the initialization. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-13perf record: Add "nodelay" mode, disabled by defaultKirill Smelkov
Sometimes there is a need to use perf in "live-log" mode. The problem is, for seldom events, actual info output is largely delayed because perf-record reads sample data in whole pages. So for such scenarious, add flag for perf-record to go in "nodelay" mode. To track e.g. what's going on in icmp_rcv while ping is running Use it with something like this: (1) $ perf probe -L icmp_rcv | grep -U8 '^ *43\>' goto error; } 38 if (!pskb_pull(skb, sizeof(*icmph))) goto error; icmph = icmp_hdr(skb); 43 ICMPMSGIN_INC_STATS_BH(net, icmph->type); /* * 18 is the highest 'known' ICMP type. Anything else is a mystery * * RFC 1122: 3.2.2 Unknown ICMP messages types MUST be silently * discarded. */ 50 if (icmph->type > NR_ICMP_TYPES) goto error; $ perf probe icmp_rcv:43 'type=icmph->type' (2) $ cat trace-icmp.py [...] def trace_begin(): print "in trace_begin" def trace_end(): print "in trace_end" def probe__icmp_rcv(event_name, context, common_cpu, common_secs, common_nsecs, common_pid, common_comm, __probe_ip, type): print_header(event_name, common_cpu, common_secs, common_nsecs, common_pid, common_comm) print "__probe_ip=%u, type=%u\n" % \ (__probe_ip, type), [...] (3) $ perf record -a -D -e probe:icmp_rcv -o - | \ perf script -i - -s trace-icmp.py Thanks to Peter Zijlstra for pointing how to do it. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu>, Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20110112140613.GA11698@tugrik.mns.mnsspb.ru> Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-13ALSA: hda - Apply mario fixup only onceTakashi Iwai
The amp-override is necessary only once at initialization time. Also fixed a coding style issue. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-13perf sched: Fix list of events, dropping unsupported ':r' modifierStephane Eranian
Looks to me like the :r modifier is not supported anymore, so remove it from the list of events. Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <AANLkTim=jawJyBj0iFd0r4-LCKzvjFW+NddzJMD5GUB9@mail.gmail.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-13ALSA: hda - Remove unused fixup entry for ALC262Takashi Iwai
... and a minor cleanup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-13mx51: add support for pwmArnaud Patard (Rtp)
This patch is adding support for pwm1 and pwm2 devices found on mx51. [ this patch has been tested with pwm-backlight driver ] Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13Fix pwm-related build failureArnaud Patard (Rtp)
Commit 076762aa52de48688f6e1b6999fe58d736479f37 is adding a macro whis is calling imx_add_mxc_pwm() but gives it 2 parameters while it's taking only one parameters. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM: ecard: irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13ARM: core irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2011-01-13ARM: Use genirq definitions from kernel/irq/Kconfig.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2011-01-13Merge branch 'sh/alphaproject' into sh-latestPaul Mundt
2011-01-13sh: Add support for AP-SH4AD-0A board.Paul Mundt
This adds preliminary support for the alpha project AP-SH4AD-0A reference platform (SH7786 based). Additional platform information available at: http://www.apnet.co.jp/product/superh/ap-sh4ad-0a.html Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13sh: Add support for AP-SH4A-3A board.Paul Mundt
This adds preliminary support for the alpha project AP-SH4A-3A reference platform (SH7785 based). Additional paltform information available at: http://www.apnet.co.jp/product/superh/ap-sh4a-3a.html Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13sh: Add a new mach type for alpha project boards.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13ARM i.MX53 enable LOCO board bootupYong Shen
1. Add Kconfig and Makefile entries 2. Add board definition 3. enable uart and fec for LOCO board Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM i.MX53 enable SMD board bootupYong Shen
1. Add Kconfig and Makefile entries 2. Add board definition 3. enable uart and fec for SMD board Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM: i.MX53 EVK: add spi nor deviceYong Shen
add spi board information for spi nor device Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM: i.MX53 EVK: add ecspi IOMUX settingYong Shen
add ecspi IOMUX setting, also fix a bug of chip select pin order Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM: i.MX53: add IOMUX pad for ecspiYong Shen
Add IOMUX pad entry for ecspi Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-01-13Merge branch 'topic/hda' into for-linusTakashi Iwai
2011-01-13Merge branch 'topic/misc' into for-linusTakashi Iwai
2011-01-13ALSA: hda - Fix NULL-derefence with a single mic in STAC auto-mic detectionTakashi Iwai
When only one mic is available and it's an analog mic, the current IDT/STAC parser may give an Oops. Reference: bko#25692 https://bugzilla.kernel.org/show_bug.cgi?id=25692 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2011-01-13serial: sh-sci: build fixes.Paul Mundt
This fixes up the port_rx_irq_mask() REIE flag definition as well as a debug printk blowing up on the SCSCR_INIT having gone away. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13ARM: mach-shmobile: Kill off unused !gpio_is_valid() caseMagnus Damm
The Card Detect GPIOs used on AP4EVB and Mackerel are alwayws valid, so kill off the unused !gpio_is_valid() case. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13Merge branch 'common/serial-rework' into sh-latestPaul Mundt
2011-01-13sh: sh7372 SH4AL-DSP probe supportMagnus Damm
Add probe support for the sh7372 SH4AL-DSP core. The most common use case for this is when the system boots from the ARM core in the sh7372 and uses the SH core for application offload as a slave CPU. May also be used to boot the sh7372 from the SH core. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13Merge branch 'master' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into common/serial-rework Conflicts: arch/sh/kernel/cpu/sh2/setup-sh7619.c arch/sh/kernel/cpu/sh2a/setup-mxg.c arch/sh/kernel/cpu/sh2a/setup-sh7201.c arch/sh/kernel/cpu/sh2a/setup-sh7203.c arch/sh/kernel/cpu/sh2a/setup-sh7206.c arch/sh/kernel/cpu/sh3/setup-sh7705.c arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh4-202.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4/setup-sh7760.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7780.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c arch/sh/kernel/cpu/sh4a/setup-shx3.c arch/sh/kernel/cpu/sh5/setup-sh5.c drivers/serial/sh-sci.c drivers/serial/sh-sci.h include/linux/serial_sci.h
generated by cgit (git 2.34.1) at 2025-09-15 18:04:26 +0000