| Age | Commit message (Collapse) | Author |
|---|
|
Both KUNIT_FAIL and KUNIT_ASSERT_FAILURE defined to KUNIT_FAIL_ASSERTION
with different tpye of kunit_assert_type. The current naming of
KUNIT_ASSERT_FAILURE and KUNIT_FAIL_ASSERTION is confusing due to their
similarities. To improve readability and symmetry, renames
KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT. Makes the naming
consistent, with KUNIT_FAIL and KUNIT_FAIL_AND_ABORT being symmetrical.
Additionally, an explanation for KUNIT_FAIL_AND_ABORT has been added to
clarify its usage.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The current comment for KUNIT_ASSERT_STRNEQ incorrectly describes it as
an expectation. Since KUNIT_ASSERT_STRNEQ is an assertion, updates the
comment to correctly refer to it as such.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The alloc/copy code pattern is better consolidated to single kstrdup (and
kstrndup) calls instead. This gets rid of deprecated[1] strncpy() uses as
well. Replace one other strncpy() use with the more idiomatic strscpy().
Link: https://github.com/KSPP/linux/issues/90 [1]
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of these changes are Qualcomm SoC specific and came in just after
I sent out the last set of fixes. This includes two regression fixes
for SoC drivers, a defconfig change to ensure the Lenovo X13s is
usable and 11 changes to DT files to fix regressions and minor
platform specific issues.
Tony and Chunyan step back from their respective maintainership roles
on the omap and unisoc platforms, and Christophe in turn takes over
maintaining some of the Freescale SoC drivers that he has been taking
care of in practice already.
Lastly, there are two trivial fixes for the davinci and sunxi
platforms"
* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
MAINTAINERS: Add more maintainers for omaps
ARM: davinci: Convert comma to semicolon
MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
arm64: dts: qcom: qdu1000: Fix LLCC reg property
arm64: dts: qcom: sm6115: add iommu for sdhc_1
arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
soc: qcom: pmic_glink: disable UCSI on sc8280xp
arm64: defconfig: enable Elan i2c-hid driver
arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
arm64: dts: allwinner: Fix PMIC interrupt number
arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
arm64: dts: qcom: sc8180x: Fix LLCC reg property again
|
|
* iommu/iommufd/paging-domain-alloc:
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
vfio/type1: Use iommu_paging_domain_alloc()
iommufd: Use iommu_paging_domain_alloc()
iommu: Add iommu_paging_domain_alloc() interface
|
|
* iommu/iommufd/attach-handles:
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
|
|
* iommu/pci/ats:
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
|
|
* iommu/fwspec-ops-removal:
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
[will: Fixed conflict in drivers/iommu/tegra-smmu.c between fwspec ops
removal and fwspec driver fix as per Robin and Jon]
|
|
* iommu/core:
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
iommufd: Use atomic_long_try_cmpxchg() in incr_user_locked_vm()
iommu/iova: Add missing MODULE_DESCRIPTION() macro
iommu/dma: Prune redundant pgprot arguments
iommu: Make iommu_sva_domain_alloc() static
|
|
Shung-Hsi Yu says:
====================
Use overflow.h helpers to check for overflows
This patch set refactors kernel/bpf/verifier.c to use type-agnostic, generic
overflow-check helpers defined in include/linux/overflow.h to check for addition
and subtraction overflow, and drop the signed_*_overflows() helpers we currently
have in kernel/bpf/verifier.c; with a fix for overflow check in adjust_jmp_off()
in patch 1.
There should be no functional change in how the verifier works and the main
motivation is to make future refactoring[1] easier.
While check_mul_overflow() also exists and could potentially replace what
we have in scalar*_min_max_mul(), it does not help with refactoring and
would either change how the verifier works (e.g. lifting restriction on
umax<=U32_MAX and u32_max<=U16_MAX) or make the code slightly harder to
read, so it is left for future endeavour.
Changes from v2 <https://lore.kernel.org/r/20240701055907.82481-1-shung-hsi.yu@suse.com>
- add fix for 5337ac4c9b80 ("bpf: Fix the corner case with may_goto and jump to
the 1st insn.") to correct the overflow check for general jump instructions
- adapt to changes in commit 5337ac4c9b80 ("bpf: Fix the corner case with
may_goto and jump to the 1st insn.")
- refactor in adjust_jmp_off() as well and remove signed_add16_overflow()
Changes from v1 <https://lore.kernel.org/r/20240623070324.12634-1-shung-hsi.yu@suse.com>:
- use pointers to values in dst_reg directly as the sum/diff pointer and
remove the else branch (Jiri)
- change local variables to be dst_reg pointers instead of src_reg values
- include comparison of generated assembly before & after the change
(Alexei)
1: https://github.com/kernel-patches/bpf/pull/7205/commits
====================
Link: https://lore.kernel.org/r/20240712080127.136608-1-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
* iommu/qualcomm/msm:
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
dt-bindings: iommu: qcom,iommu: Add MSM8953 GPU IOMMU to SMMUv2 compatibles
|
|
Similar to previous patch that drops signed_add*_overflows() and uses
(compiler) builtin-based check_add_overflow(), do the same for
signed_sub*_overflows() and replace them with the generic
check_sub_overflow() to make future refactoring easier and have the
checks implemented more efficiently.
Unsigned overflow check for subtraction does not use helpers and are
simple enough already, so they're left untouched.
After the change GCC 13.3.0 generates cleaner assembly on x86_64:
if (check_sub_overflow(*dst_smin, src_reg->smax_value, dst_smin) ||
139bf: mov 0x28(%r12),%rax
139c4: mov %edx,0x54(%r12)
139c9: sub %r11,%rax
139cc: mov %rax,0x28(%r12)
139d1: jo 14627 <adjust_reg_min_max_vals+0x1237>
check_sub_overflow(*dst_smax, src_reg->smin_value, dst_smax)) {
139d7: mov 0x30(%r12),%rax
139dc: sub %r9,%rax
139df: mov %rax,0x30(%r12)
if (check_sub_overflow(*dst_smin, src_reg->smax_value, dst_smin) ||
139e4: jo 14627 <adjust_reg_min_max_vals+0x1237>
...
*dst_smin = S64_MIN;
14627: movabs $0x8000000000000000,%rax
14631: mov %rax,0x28(%r12)
*dst_smax = S64_MAX;
14636: sub $0x1,%rax
1463a: mov %rax,0x30(%r12)
Before the change it gives:
if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
13a50: mov 0x28(%r12),%rdi
13a55: mov %edx,0x54(%r12)
dst_reg->smax_value = S64_MAX;
13a5a: movabs $0x7fffffffffffffff,%rdx
13a64: mov %eax,0x50(%r12)
dst_reg->smin_value = S64_MIN;
13a69: movabs $0x8000000000000000,%rax
s64 res = (s64)((u64)a - (u64)b);
13a73: mov %rdi,%rsi
13a76: sub %rcx,%rsi
if (b < 0)
13a79: test %rcx,%rcx
13a7c: js 145ea <adjust_reg_min_max_vals+0x119a>
if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
13a82: cmp %rsi,%rdi
13a85: jl 13ac7 <adjust_reg_min_max_vals+0x677>
signed_sub_overflows(dst_reg->smax_value, smin_val)) {
13a87: mov 0x30(%r12),%r8
s64 res = (s64)((u64)a - (u64)b);
13a8c: mov %r8,%rax
13a8f: sub %r9,%rax
return res > a;
13a92: cmp %rax,%r8
13a95: setl %sil
if (b < 0)
13a99: test %r9,%r9
13a9c: js 147d1 <adjust_reg_min_max_vals+0x1381>
dst_reg->smax_value = S64_MAX;
13aa2: movabs $0x7fffffffffffffff,%rdx
dst_reg->smin_value = S64_MIN;
13aac: movabs $0x8000000000000000,%rax
if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
13ab6: test %sil,%sil
13ab9: jne 13ac7 <adjust_reg_min_max_vals+0x677>
dst_reg->smin_value -= smax_val;
13abb: mov %rdi,%rax
dst_reg->smax_value -= smin_val;
13abe: mov %r8,%rdx
dst_reg->smin_value -= smax_val;
13ac1: sub %rcx,%rax
dst_reg->smax_value -= smin_val;
13ac4: sub %r9,%rdx
13ac7: mov %rax,0x28(%r12)
...
13ad1: mov %rdx,0x30(%r12)
...
if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
145ea: cmp %rsi,%rdi
145ed: jg 13ac7 <adjust_reg_min_max_vals+0x677>
145f3: jmp 13a87 <adjust_reg_min_max_vals+0x637>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240712080127.136608-4-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
signed_add*_overflows() was added back when there was no overflow-check
helper. With the introduction of such helpers in commit f0907827a8a91
("compiler.h: enable builtin overflow checkers and add fallback code"), we
can drop signed_add*_overflows() in kernel/bpf/verifier.c and use the
generic check_add_overflow() instead.
This will make future refactoring easier, and takes advantage of
compiler-emitted hardware instructions that efficiently implement these
checks.
After the change GCC 13.3.0 generates cleaner assembly on x86_64:
err = adjust_scalar_min_max_vals(env, insn, dst_reg, *src_reg);
13625: mov 0x28(%rbx),%r9 /* r9 = src_reg->smin_value */
13629: mov 0x30(%rbx),%rcx /* rcx = src_reg->smax_value */
...
if (check_add_overflow(*dst_smin, src_reg->smin_value, dst_smin) ||
141c1: mov %r9,%rax
141c4: add 0x28(%r12),%rax
141c9: mov %rax,0x28(%r12)
141ce: jo 146e4 <adjust_reg_min_max_vals+0x1294>
check_add_overflow(*dst_smax, src_reg->smax_value, dst_smax)) {
141d4: add 0x30(%r12),%rcx
141d9: mov %rcx,0x30(%r12)
if (check_add_overflow(*dst_smin, src_reg->smin_value, dst_smin) ||
141de: jo 146e4 <adjust_reg_min_max_vals+0x1294>
...
*dst_smin = S64_MIN;
146e4: movabs $0x8000000000000000,%rax
146ee: mov %rax,0x28(%r12)
*dst_smax = S64_MAX;
146f3: sub $0x1,%rax
146f7: mov %rax,0x30(%r12)
Before the change it gives:
s64 smin_val = src_reg->smin_value;
675: mov 0x28(%rsi),%r8
s64 smax_val = src_reg->smax_value;
u64 umin_val = src_reg->umin_value;
u64 umax_val = src_reg->umax_value;
679: mov %rdi,%rax /* rax = dst_reg */
if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
67c: mov 0x28(%rdi),%rdi /* rdi = dst_reg->smin_value */
u64 umin_val = src_reg->umin_value;
680: mov 0x38(%rsi),%rdx
u64 umax_val = src_reg->umax_value;
684: mov 0x40(%rsi),%rcx
s64 res = (s64)((u64)a + (u64)b);
688: lea (%r8,%rdi,1),%r9 /* r9 = dst_reg->smin_value + src_reg->smin_value */
return res < a;
68c: cmp %r9,%rdi
68f: setg %r10b /* r10b = (dst_reg->smin_value + src_reg->smin_value) > dst_reg->smin_value */
if (b < 0)
693: test %r8,%r8
696: js 72b <scalar_min_max_add+0xbb>
signed_add_overflows(dst_reg->smax_value, smax_val)) {
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
69c: movabs $0x7fffffffffffffff,%rdi
s64 smax_val = src_reg->smax_value;
6a6: mov 0x30(%rsi),%r8
dst_reg->smin_value = S64_MIN;
6aa: 00 00 00 movabs $0x8000000000000000,%rsi
if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
6b4: test %r10b,%r10b /* (dst_reg->smin_value + src_reg->smin_value) > dst_reg->smin_value ? goto 6cb */
6b7: jne 6cb <scalar_min_max_add+0x5b>
signed_add_overflows(dst_reg->smax_value, smax_val)) {
6b9: mov 0x30(%rax),%r10 /* r10 = dst_reg->smax_value */
s64 res = (s64)((u64)a + (u64)b);
6bd: lea (%r10,%r8,1),%r11 /* r11 = dst_reg->smax_value + src_reg->smax_value */
if (b < 0)
6c1: test %r8,%r8
6c4: js 71e <scalar_min_max_add+0xae>
if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
6c6: cmp %r11,%r10 /* (dst_reg->smax_value + src_reg->smax_value) <= dst_reg->smax_value ? goto 723 */
6c9: jle 723 <scalar_min_max_add+0xb3>
} else {
dst_reg->smin_value += smin_val;
dst_reg->smax_value += smax_val;
}
6cb: mov %rsi,0x28(%rax)
...
6d5: mov %rdi,0x30(%rax)
...
if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
71e: cmp %r11,%r10
721: jl 6cb <scalar_min_max_add+0x5b>
dst_reg->smin_value += smin_val;
723: mov %r9,%rsi
dst_reg->smax_value += smax_val;
726: mov %r11,%rdi
729: jmp 6cb <scalar_min_max_add+0x5b>
return res > a;
72b: cmp %r9,%rdi
72e: setl %r10b
732: jmp 69c <scalar_min_max_add+0x2c>
737: nopw 0x0(%rax,%rax,1)
Note: unlike adjust_ptr_min_max_vals() and scalar*_min_max_add(), it is
necessary to introduce intermediate variable in adjust_jmp_off() to keep
the functional behavior unchanged. Without an intermediate variable
imm/off will be altered even on overflow.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240712080127.136608-3-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
adjust_jmp_off() incorrectly used the insn->imm field for all overflow check,
which is incorrect as that should only be done or the BPF_JMP32 | BPF_JA case,
not the general jump instruction case. Fix it by using insn->off for overflow
check in the general case.
Fixes: 5337ac4c9b80 ("bpf: Fix the corner case with may_goto and jump to the 1st insn.")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240712080127.136608-2-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
* iommu/nvidia/tegra:
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
|
|
* iommu/intel/vt-d:
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
iommu/vt-d: Refactor PCI PRI enabling/disabling callbacks
iommu/vt-d: Add helper to flush caches for context change
iommu/vt-d: Add helper to allocate paging domain
iommu/vt-d: Downgrade warning for pre-enabled IR
iommu/vt-d: Remove control over Execute-Requested requests
iommu/vt-d: Remove comment for def_domain_type
iommu/vt-d: Handle volatile descriptor status read
iommu/vt-d: Use try_cmpxchg64() in intel_pasid_get_entry()
|
|
* iommu/arm/smmu: (32 commits)
iommu: Move IOMMU_DIRTY_NO_CLEAR define
iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init
iommu/arm-smmu-v3: Enable HTTU for stage1 with io-pgtable mapping
iommu/arm-smmu-v3: Add support for dirty tracking in domain alloc
iommu/io-pgtable-arm: Add read_and_clear_dirty() support
iommu/arm-smmu-v3: Add feature detection for HTTU
iommu/arm-smmu-v3: Add support for domain_alloc_user fn
iommu/arm-smmu-qcom: record reason for deferring probe
iommu/arm-smmu: Pretty-print context fault related regs
iommu/arm-smmu-qcom-debug: Do not print for handled faults
iommu/arm-smmu: Add CB prefix to register bitfields
dt-bindings: arm-smmu: Add X1E80100 GPU SMMU
iommu/arm-smmu-v3: add missing MODULE_DESCRIPTION() macro
iommu/arm-smmu-v3: Shrink the strtab l1_desc array
iommu/arm-smmu-v3: Do not zero the strtab twice
iommu/arm-smmu-v3: Allow setting a S1 domain to a PASID
iommu/arm-smmu-v3: Allow a PASID to be set when RID is IDENTITY/BLOCKED
iommu/arm-smmu-v3: Test the STE S1DSS functionality
iommu/arm-smmu-v3: Allow IDENTITY/BLOCKED to be set while PASID is used
iommu/arm-smmu-v3: Put the SVA mmu notifier in the smmu_domain
...
|
|
* iommu/amd/amd-vi:
iommu/amd: Use try_cmpxchg64() in v2_alloc_pte()
|
|
* iommu/allwinner/sun50i:
iommu: sun50i: Add H616 compatible string
dt-bindings: iommu: add new compatible strings
iommu: sun50i: allocate page tables from below 4 GiB
iommu: sun50i: clear bypass register
|
|
Fixes the indexing of the string array.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new packet.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This change caused PSR SU panels to not read from their remote fb,
preventing us from entering self-refresh. It is a regression.
This reverts commit eb6dfbb7a9c67c7d9bcdb9f9b9131270e2144e3d.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc1000bf463d1d89f66d6b5369cf76603f32c4d3)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small remaining driver fixes for 6.10-final that have
all been in linux-next for a while and resolve reported issues.
Included in here are:
- mei driver fixes (and a spelling fix at the end just to be clean)
- iio driver fixes for reported problems
- fastrpc bugfixes
- nvmem small fixes"
* tag 'char-misc-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: vsc: Fix spelling error
mei: vsc: Enhance SPI transfer of IVSC ROM
mei: vsc: Utilize the appropriate byte order swap function
mei: vsc: Prevent timeout error with added delay post-firmware download
mei: vsc: Enhance IVSC chipset stability during warm reboot
nvmem: core: limit cell sysfs permissions to main attribute ones
nvmem: core: only change name to fram for current attribute
nvmem: meson-efuse: Fix return value of nvmem callbacks
nvmem: rmem: Fix return value of rmem_read()
misc: microchip: pci1xxxx: Fix return value of nvmem callbacks
hpet: Support 32-bit userspace
misc: fastrpc: Restrict untrusted app to attach to privileged PD
misc: fastrpc: Fix ownership reassignment of remote heap
misc: fastrpc: Fix memory leak in audio daemon attach operation
misc: fastrpc: Avoid updating PD type for capability request
misc: fastrpc: Copy the complete capability structure to user
misc: fastrpc: Fix DSP capabilities request
iio: light: apds9306: Fix error handing
iio: trigger: Fix condition for own trigger
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small serial driver fixes for 6.10-final. Included in
here are:
- qcom-geni fixes for a much much much discussed issue and everyone
now seems to be agreed that this is the proper way forward to
resolve the reported lockups
- imx serial driver bugfixes
- 8250_omap errata fix
- ma35d1 serial driver bugfix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: do not kill the machine on fifo underrun
serial: qcom-geni: fix hard lockup on buffer flush
serial: qcom-geni: fix soft lockup on sw flow control and suspend
serial: imx: ensure RTS signal is not left active after shutdown
tty: serial: ma35d1: Add a NULL check for of_node
serial: 8250_omap: Fix Errata i2310 with RX FIFO level check
serial: imx: only set receiver level if it is zero
|
|
iommu_fwspec_init() expects to receive the fwnode corresponding to the
IOMMU device, not the fwnode corresponding to the client device being
probed.
Fix arm_smmu_configure() to pass the correct fwnode to
iommu_fwspec_init().
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0eec5f84-6b39-43ba-ab2f-914688a5cf45@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
nfs_update_folio has code to extend a write to the entire page under
certain conditions. With the support for large folios this now
suddenly extents to the variable sized and potentially much larger folio.
Add code to limit the extension to the page boundaries of the start and
end of the write, which matches the historic expecation and the code
comments.
Fixes: b73fe2dd6cd5 ("nfs: add support for large folios")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for
6.10-final. Included in here are:
- new usb-serial device ids for reported devices
- syzbot-triggered duplicate endpoint bugfix
- gadget bugfix for configfs memory overwrite
- xhci resume bugfix
- new device quirk added
- usb core error path bugfix
All of these have been in linux-next (most for a while) with no
reported issues"
* tag 'usb-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: mos7840: fix crash on resume
USB: serial: option: add Rolling RW350-GL variants
USB: serial: option: add support for Foxconn T99W651
USB: serial: option: add Netprisma LCUK54 series modules
usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
usb: dwc3: pci: add support for the Intel Panther Lake
usb: core: add missing of_node_put() in usb_of_has_devices_or_graph
USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k
USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
xhci: always resume roothubs if xHC was reset during resume
USB: serial: option: add Telit generic core-dump composition
USB: serial: option: add Fibocom FM350-GL
USB: serial: option: add Telit FN912 rmnet compositions
|
|
Look for the udev generated persistent device name for NVMe devices
in addition to the SCSI ones and the Redhat-specific device mapper
name.
This is the client side implementation of RFC 9561 "Using the Parallel
NFS (pNFS) SCSI Layout to Access Non-Volatile Memory Express (NVMe)
Storage Devices".
Note that the udev rules for nvme are a bit of a mess and udev will only
create a link for the uuid if the NVMe namespace has one, and not the
NGUID. As the current RFCs don't support UUID based identifications this
means the layout can't be used on such namespaces out of the box. A
small tweak to the udev rules can work around it, and as the real fix I
will submit a draft to the IETF NFSv4 working group to support UUID-based
identifiers for SCSI and NVMe.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are small device-specific fixes for ASoC
SOF / Intel and usual HD-audio quirks.
The only significant high LOC is found in the Cirrus firmware driver,
but all those are for hardening against malicious firmware blobs, and
they look fine for taking as a last minute fix, too"
* tag 'sound-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable Mute LED on HP 250 G7
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
ALSA: hda/realtek: Limit mic boost on VAIO PRO PX
ALSA: hda: cs35l41: Fix swapped l/r audio channels for Lenovo ThinBook 13x Gen4
ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES
ASoC: rt711-sdw: add missing readable registers
ASoC: SOF: Intel: hda: fix null deref on system suspend entry
ALSA: hda/realtek: add quirk for Clevo V5[46]0TU
firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers
firmware: cs_dsp: Validate payload length before processing block
firmware: cs_dsp: Return error if block header overflows file
firmware: cs_dsp: Fix overflow checking of wmfw header
|
|
Intel IOMMU operates on inclusive bounds (both generally aas well as
iommu_domain_identity_map()). Meanwhile, for_each_mem_pfn_range() uses
exclusive bounds for end_pfn. This creates an off-by-one error when
switching between the two.
Fixes: c5395d5c4a82 ("intel-iommu: Clean up iommu_domain_identity_map()")
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Tested-by: Sudheer Dantuluri <dantuluris@google.com>
Suggested-by: Gary Zibrat <gzibrat@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240709234913.2749386-1-pandoh@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull more bcachefs fixes from Kent Overstreet:
- revert the SLAB_ACCOUNT patch, something crazy is going on in memcg
and someone forgot to test
- minor fixes: missing rcu_read_lock(), scheduling while atomic (in an
emergency shutdown path)
- two lockdep fixes; these could have gone earlier, but were left to
bake awhile
* tag 'bcachefs-2024-07-12' of https://evilpiepirate.org/git/bcachefs:
bcachefs: bch2_gc_btree() should not use btree_root_lock
bcachefs: Set PF_MEMALLOC_NOFS when trans->locked
bcachefs; Use trans_unlock_long() when waiting on allocator
Revert "bcachefs: Mark bch_inode_info as SLAB_ACCOUNT"
bcachefs: fix scheduling while atomic in break_cycle()
bcachefs: Fix RCU splat
|
|
Fixes the compile issue when CONFIG_IOMMU_API is not set.
Fixes: 4fe88fd8b4ae ("iommu/io-pgtable-arm: Add read_and_clear_dirty() support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407121602.HL9ih1it-lkp@intel.com/
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240712113132.45100-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As reported by Mirsad [1] we still see format warnings in kernel/bpf/btf.o
at W=1 warning level:
CC kernel/bpf/btf.o
./kernel/bpf/btf.c: In function ‘btf_type_seq_show_flags’:
./kernel/bpf/btf.c:7553:21: warning: assignment left-hand side might be a candidate for a format attribute [-Wsuggest-attribute=format]
7553 | sseq.showfn = btf_seq_show;
| ^
./kernel/bpf/btf.c: In function ‘btf_type_snprintf_show’:
./kernel/bpf/btf.c:7604:31: warning: assignment left-hand side might be a candidate for a format attribute [-Wsuggest-attribute=format]
7604 | ssnprintf.show.showfn = btf_snprintf_show;
| ^
Combined with CONFIG_WERROR=y these can halt the build.
The fix (annotating the structure field with __printf())
suggested by Mirsad resolves these. Apologies I missed this last time.
No other W=1 warnings were observed in kernel/bpf after this fix.
[1] https://lore.kernel.org/bpf/92c9d047-f058-400c-9c7d-81d4dc1ef71b@gmail.com/
Fixes: b3470da314fd ("bpf: annotate BTF show functions with __printf")
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Suggested-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240712092859.1390960-1-alan.maguire@oracle.com
|
|
Requriment from customer to add new kcontrol to set tas2563 digital
Volume
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240710064238.1480-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The timer/counter block on the Realtek SoCs provides up to 5 timers. It
also includes a watchdog timer which is handled by the
realtek_otto_wdt.c driver.
One timer will be used per CPU as a local clock event generator. An
additional timer will be used as an overal stable clocksource.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20240710043524.1535151-8-chris.packham@alliedtelesis.co.nz
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add the devicetree schema for the realtek,otto-timer present on a number
of Realtek SoCs.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710043524.1535151-6-chris.packham@alliedtelesis.co.nz
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add compatible string for SOPHGO SG2002 Core-Local Interrupt Controller.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240709-sg2002-v3-2-af779c3d139d@bootlin.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Document support for the Timer Unit (TMU) on R-Car Gen2 SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/de215e00e180c266527b7bd7cff5f75df918da98.1716985096.git.geert+renesas@glider.be
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Document support for the Timer Unit (TMU) on RZ/G1 SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/bdc30850526f448b8480d9a5e65e35739f416771.1716985096.git.geert+renesas@glider.be
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Document support for the Timer Unit (TMU) on the R-Mobile APE6 (R8A73A4)
Soc.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/17e3fd5f27ab540c8611545ad3dc5a697ca66c58.1716985096.git.geert+renesas@glider.be
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Counter width of GIC is configurable and can be read from a
register.
Use width value from the register for sched_clock.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/20240612-mips-clks-v2-7-a57e6f49f3db@flygoat.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
It is a good clocksource which usually go as fast as CPU core
and have a low access latency, so raise the base of rating
from Good to desired when we know that it has a stable frequency.
Increase frequency addend dividend to 10000000 (10MHz) to
reasonably accommodate multi GHz level clock, also cap rating
within current level.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/20240612-mips-clks-v2-6-a57e6f49f3db@flygoat.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
There is a race condition in the CMT interrupt handler. In the interrupt
handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This
flag is used to indicate any call to set_next_event() should not be
directly propagated to the device, but instead cached. This is done as
the interrupt handler itself reprograms the device when needed before it
completes and this avoids this operation to take place twice.
It is unclear why this design was chosen, my suspicion is to allow the
struct clock_event_device.event_handler callback, which is called while
the FLAG_IRQCONTEXT is set, can update the next event without having to
write to the device twice.
Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is
set and later cleared where the interrupt handler have already started to
write the next event to the device. If set_next_event() is called in
this window the value is only cached in the driver but not written. This
leads to the board to misbehave, or worse lockup and produce a splat.
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: 0-...!: (0 ticks this GP) idle=f5e0/0/0x0 softirq=519/519 fqs=0 (false positive?)
rcu: (detected by 1, t=6502 jiffies, g=-595, q=77 ncpus=2)
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-rc5-arm64-renesas-00019-g74a6f86eaf1c-dirty #20
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tick_check_broadcast_expired+0xc/0x40
lr : cpu_idle_poll.isra.0+0x8c/0x168
sp : ffff800081c63d70
x29: ffff800081c63d70 x28: 00000000580000c8 x27: 00000000bfee5610
x26: 0000000000000027 x25: 0000000000000000 x24: 0000000000000000
x23: ffff00007fbb9100 x22: ffff8000818f1008 x21: ffff8000800ef07c
x20: ffff800081c79ec0 x19: ffff800081c70c28 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffc2c717d8
x14: 0000000000000000 x13: ffff000009c18080 x12: ffff8000825f7fc0
x11: 0000000000000000 x10: ffff8000818f3cd4 x9 : 0000000000000028
x8 : ffff800081c79ec0 x7 : ffff800081c73000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : ffff7ffffe286000 x3 : 0000000000000000
x2 : ffff7ffffe286000 x1 : ffff800082972900 x0 : ffff8000818f1008
Call trace:
tick_check_broadcast_expired+0xc/0x40
do_idle+0x9c/0x280
cpu_startup_entry+0x34/0x40
kernel_init+0x0/0x11c
do_one_initcall+0x0/0x260
__primary_switched+0x80/0x88
rcu: rcu_preempt kthread timer wakeup didn't happen for 6501 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=0 timer-softirq=262
rcu: rcu_preempt kthread starved for 6502 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 flags:0x00000008
Call trace:
__switch_to+0xbc/0x100
__schedule+0x358/0xbe0
schedule+0x48/0x148
schedule_timeout+0xc4/0x138
rcu_gp_fqs_loop+0x12c/0x764
rcu_gp_kthread+0x208/0x298
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
The design have been part of the driver since it was first merged in
early 2009. It becomes increasingly harder to trigger the issue the
older kernel version one tries. It only takes a few boots on v6.10-rc5,
while hundreds of boots are needed to trigger it on v5.10.
Close the race condition by using the CMT channel lock for the two
competing sections. The channel lock was added to the driver after its
initial design.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240702190230.3825292-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The 'err' variable is initialized whatever the code path, it is
pointless to initialize it when it is declared.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240705052159.22235-1-kunyu@nfschina.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The irq variable is initialized whatever the code path, it is poinless
to initialize when declaring it.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240705040729.21961-1-kunyu@nfschina.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Remove separate handling for vdd-buck regulator supply which is not
required. The vdd-buck regulator supply enabled using bulk enable.
Add the error handling in wcd937x_probe() and disable the regulators in
error case.
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/linux-sound/834d31cc-f4bc-4db7-a25b-f9869e550eb6@wanadoo.fr/
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://patch.msgid.link/20240704081723.3394153-4-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the string compare with widget name in MIC BIAS settings, instead
of string compare use the MIC BIAS id's.
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Closes: https://lore.kernel.org/linux-sound/ba911ebd-aef5-46af-ace1-84d13bee6876@linaro.org/
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://patch.msgid.link/20240704081723.3394153-3-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the unbalanced pm_runtime_enable! in wcd937x-sdw soundwire slave.
Fixes: c99a515ff153 ("ASoC: codecs: wcd937x-sdw: add SoundWire driver")
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://patch.msgid.link/20240704081723.3394153-2-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If polling_delay is nonzero and passive_delay is greater than
polling_delay, the thermal zone temperature will be updated less
often when tz->passive is nonzero, which is not as expected. Make
the thermal zone registration fail with -EINVAL in that case as
this is a clear thermal zone configuration mistake.
If polling_delay is nonzero and passive_delay is 0, which is regarded
as a valid thermal zone configuration, the thermal zone will use polling
except when tz->passive is nonzero. However, the expected behavior in
that case is to continue temperature polling with the same delay value
regardless of tz->passive, so set passive_delay to the polling_delay
value then.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/5802156.DvuYhMxLoT@rjwysocki.net
|
|
Because __thermal_zone_get_trip() is only called by thermal_zone_get_trip()
now, fold the former into the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/22339769.EfDdHjke4D@rjwysocki.net
|
