| Age | Commit message (Collapse) | Author |
|---|
|
Fatal read errors are worth warning about, unless of course the device
was just unplugged from the machine - something that's a rather normal
occurrence when the igb/igc adapter is located on a Thunderbolt dock. So,
let's only WARN() if there's a fatal read error while the device is
still present.
This fixes the following WARN splat that's been appearing whenever I
unplug my Caldigit TS3 Thunderbolt dock from my laptop:
igb 0000:09:00.0 enp9s0: PCIe link lost
------------[ cut here ]------------
igb: Failed to read reg 0x18!
WARNING: CPU: 7 PID: 516 at
drivers/net/ethernet/intel/igb/igb_main.c:756 igb_rd32+0x57/0x6a [igb]
Modules linked in: igb dca thunderbolt fuse vfat fat elan_i2c mei_wdt
mei_hdcp i915 wmi_bmof intel_wmi_thunderbolt iTCO_wdt
iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp joydev
coretemp crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel
intel_cstate drm_kms_helper intel_uncore syscopyarea sysfillrect
sysimgblt fb_sys_fops intel_rapl_perf intel_xhci_usb_role_switch mei_me
drm roles idma64 i2c_i801 ucsi_acpi typec_ucsi mei intel_lpss_pci
processor_thermal_device typec intel_pch_thermal intel_soc_dts_iosf
intel_lpss int3403_thermal thinkpad_acpi wmi int340x_thermal_zone
ledtrig_audio int3400_thermal acpi_thermal_rel acpi_pad video
pcc_cpufreq ip_tables serio_raw nvme nvme_core crc32c_intel uas
usb_storage e1000e i2c_dev
CPU: 7 PID: 516 Comm: kworker/u16:3 Not tainted 5.2.0-rc1Lyude-Test+ #14
Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:igb_rd32+0x57/0x6a [igb]
Code: 87 b8 fc ff ff 48 c7 47 08 00 00 00 00 48 c7 c6 33 42 9b c0 4c 89
c7 e8 47 45 cd dc 89 ee 48 c7 c7 43 42 9b c0 e8 c1 94 71 dc <0f> 0b eb
08 8b 00 ff c0 75 b0 eb c8 44 89 e0 5d 41 5c c3 0f 1f 44
RSP: 0018:ffffba5801cf7c48 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff9e7956608840 RCX: 0000000000000007
RDX: 0000000000000000 RSI: ffffba5801cf7b24 RDI: ffff9e795e3d6a00
RBP: 0000000000000018 R08: 000000009dec4a01 R09: ffffffff9e61018f
R10: 0000000000000000 R11: ffffba5801cf7ae5 R12: 00000000ffffffff
R13: ffff9e7956608840 R14: ffff9e795a6f10b0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff9e795e3c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564317bc4088 CR3: 000000010e00a006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
igb_release_hw_control+0x1a/0x30 [igb]
igb_remove+0xc5/0x14b [igb]
pci_device_remove+0x3b/0x93
device_release_driver_internal+0xd7/0x17e
pci_stop_bus_device+0x36/0x75
pci_stop_bus_device+0x66/0x75
pci_stop_bus_device+0x66/0x75
pci_stop_and_remove_bus_device+0xf/0x19
trim_stale_devices+0xc5/0x13a
? __pm_runtime_resume+0x6e/0x7b
trim_stale_devices+0x103/0x13a
? __pm_runtime_resume+0x6e/0x7b
trim_stale_devices+0x103/0x13a
acpiphp_check_bridge+0xd8/0xf5
acpiphp_hotplug_notify+0xf7/0x14b
? acpiphp_check_bridge+0xf5/0xf5
acpi_device_hotplug+0x357/0x3b5
acpi_hotplug_work_fn+0x1a/0x23
process_one_work+0x1a7/0x296
worker_thread+0x1a8/0x24c
? process_scheduled_works+0x2c/0x2c
kthread+0xe9/0xee
? kthread_destroy_worker+0x41/0x41
ret_from_fork+0x35/0x40
---[ end trace 252bf10352c63d22 ]---
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 47e16692b26b ("igb/igc: warn when fatal read failure happens")
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
tcp_max_syn_backlog default value depends on memory size
and TCP ehash size. Before this patch, the max value
was 2048 [1], which is considered too small nowadays.
Increase it to 4096 to match the recent SOMAXCONN change.
[1] This is with TCP ehash size being capped to 524288 buckets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SOMAXCONN is /proc/sys/net/core/somaxconn default value.
It has been defined as 128 more than 20 years ago.
Since it caps the listen() backlog values, the very small value has
caused numerous problems over the years, and many people had
to raise it on their hosts after beeing hit by problems.
Google has been using 1024 for at least 15 years, and we increased
this to 4096 after TCP listener rework has been completed, more than
4 years ago. We got no complain of this change breaking any
legacy application.
Many applications indeed setup a TCP listener with listen(fd, -1);
meaning they let the system select the backlog.
Raising SOMAXCONN lowers chance of the port being unavailable under
even small SYNFLOOD attack, and reduces possibilities of side channel
vulnerabilities.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Intended for upstream testing so that we can still exercise the LMEM
plumbing and !i915_ggtt_has_aperture paths. Smoke tested on Skull Canyon
device. This works by allocating an intel_memory_region for a reserved
portion of system memory, which we treat like LMEM. For the LMEMBAR we
steal the aperture and 1:1 it map to the stolen region.
To enable simply set the i915 modparam fake_lmem_start= on the kernel
cmdline with the start of reserved region(see memmap=). The size of the
region we can use is determined by the size of the mappable aperture, so
the size of reserved region should be >= mappable_end. For now we only
enable for the selftests. Depends on CONFIG_DRM_I915_UNSTABLE being
enabled.
eg. memmap=2G$16G i915.fake_lmem_start=0x400000000
v2: make fake_lmem_start an i915 modparam
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030173320.8850-1-matthew.auld@intel.com
|
|
* pm-cpufreq:
ACPI: processor: Add QoS requests for all CPUs
|
|
The functions bpf_map_area_alloc() and bpf_map_charge_init() prior
this commit passed the size parameter as size_t. In this commit this
is changed to u64.
All users of these functions avoid size_t overflows on 32-bit systems,
by explicitly using u64 when calculating the allocation size and
memory charge cost. However, since the result was narrowed by the
size_t when passing size and cost to the functions, the overflow
handling was in vain.
Instead of changing all call sites to size_t and handle overflow at
the call site, the parameter is changed to u64 and checked in the
functions above.
Fixes: d407bd25a204 ("bpf: don't trigger OOM killer under pressure with map alloc")
Fixes: c85d69135a91 ("bpf: move memory size checks to bpf_map_charge_init()")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191029154307.23053-1-bjorn.topel@gmail.com
|
|
To remove that test_attr__{enabled/open} are used by perf-sys.h, we
set HAVE_ATTR_TEST to zero.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: KP Singh <kpsingh@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: http://lore.kernel.org/bpf/20191001113307.27796-3-bjorn.topel@gmail.com
|
|
For users of perf-sys.h outside perf, e.g. samples/bpf/bpf_load.c, it's
convenient not to depend on test_attr__*.
After commit 91854f9a077e ("perf tools: Move everything related to
sys_perf_event_open() to perf-sys.h"), all users of perf-sys.h will
depend on test_attr__enabled and test_attr__open.
This commit enables a user to define HAVE_ATTR_TEST to zero in order
to omit the test dependency.
Fixes: 91854f9a077e ("perf tools: Move everything related to sys_perf_event_open() to perf-sys.h")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: http://lore.kernel.org/bpf/20191001113307.27796-2-bjorn.topel@gmail.com
|
|
Commit da58f90f11f5 ("netdevsim: Add devlink-trap support") added
delayed work to netdevsim that periodically iterates over the registered
netdevsim ports and reports various packet traps via devlink.
While the delayed work takes the 'port_list_lock' mutex to protect
against concurrent addition / deletion of ports, during device creation
/ dismantle ports are added / deleted without this lock, which can
result in a use-after-free [1].
Fix this by making sure that the ports list is always modified under the
lock.
[1]
[ 59.205543] ==================================================================
[ 59.207748] BUG: KASAN: use-after-free in nsim_dev_trap_report_work+0xa67/0xad0
[ 59.210247] Read of size 8 at addr ffff8883cbdd3398 by task kworker/3:1/38
[ 59.212584]
[ 59.213148] CPU: 3 PID: 38 Comm: kworker/3:1 Not tainted 5.4.0-rc3-custom-16119-ge6abb5f0261e #2013
[ 59.215896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[ 59.218384] Workqueue: events nsim_dev_trap_report_work
[ 59.219428] Call Trace:
[ 59.219924] dump_stack+0xa9/0x10e
[ 59.220623] print_address_description.constprop.4+0x21/0x340
[ 59.221976] ? vprintk_func+0x66/0x240
[ 59.222752] __kasan_report.cold.8+0x78/0x91
[ 59.223602] ? nsim_dev_trap_report_work+0xa67/0xad0
[ 59.224603] kasan_report+0xe/0x20
[ 59.225296] nsim_dev_trap_report_work+0xa67/0xad0
[ 59.226435] ? rcu_read_lock_sched_held+0xaf/0xe0
[ 59.227512] ? trace_event_raw_event_rcu_quiescent_state_report+0x360/0x360
[ 59.228851] process_one_work+0x98f/0x1760
[ 59.229684] ? pwq_dec_nr_in_flight+0x330/0x330
[ 59.230656] worker_thread+0x91/0xc40
[ 59.231587] ? process_one_work+0x1760/0x1760
[ 59.232451] kthread+0x34a/0x410
[ 59.233104] ? __kthread_queue_delayed_work+0x240/0x240
[ 59.234141] ret_from_fork+0x3a/0x50
[ 59.234982]
[ 59.235371] Allocated by task 187:
[ 59.236189] save_stack+0x19/0x80
[ 59.236853] __kasan_kmalloc.constprop.5+0xc1/0xd0
[ 59.237822] kmem_cache_alloc_trace+0x14c/0x380
[ 59.238769] __nsim_dev_port_add+0xaf/0x5c0
[ 59.239627] nsim_dev_probe+0x4fc/0x1140
[ 59.240550] really_probe+0x264/0xc00
[ 59.241418] driver_probe_device+0x208/0x2e0
[ 59.242255] __device_attach_driver+0x215/0x2d0
[ 59.243150] bus_for_each_drv+0x154/0x1d0
[ 59.243944] __device_attach+0x1ba/0x2b0
[ 59.244923] bus_probe_device+0x1dd/0x290
[ 59.245805] device_add+0xbac/0x1550
[ 59.246528] new_device_store+0x1f4/0x400
[ 59.247306] bus_attr_store+0x7b/0xa0
[ 59.248047] sysfs_kf_write+0x10f/0x170
[ 59.248941] kernfs_fop_write+0x283/0x430
[ 59.249843] __vfs_write+0x81/0x100
[ 59.250546] vfs_write+0x1ce/0x510
[ 59.251190] ksys_write+0x104/0x200
[ 59.251873] do_syscall_64+0xa4/0x4e0
[ 59.252642] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 59.253837]
[ 59.254203] Freed by task 187:
[ 59.254811] save_stack+0x19/0x80
[ 59.255463] __kasan_slab_free+0x125/0x170
[ 59.256265] kfree+0x100/0x440
[ 59.256870] nsim_dev_remove+0x98/0x100
[ 59.257651] nsim_bus_remove+0x16/0x20
[ 59.258382] device_release_driver_internal+0x20b/0x4d0
[ 59.259588] bus_remove_device+0x2e9/0x5a0
[ 59.260551] device_del+0x410/0xad0
[ 59.263777] device_unregister+0x26/0xc0
[ 59.264616] nsim_bus_dev_del+0x16/0x60
[ 59.265381] del_device_store+0x2d6/0x3c0
[ 59.266295] bus_attr_store+0x7b/0xa0
[ 59.267192] sysfs_kf_write+0x10f/0x170
[ 59.267960] kernfs_fop_write+0x283/0x430
[ 59.268800] __vfs_write+0x81/0x100
[ 59.269551] vfs_write+0x1ce/0x510
[ 59.270252] ksys_write+0x104/0x200
[ 59.270910] do_syscall_64+0xa4/0x4e0
[ 59.271680] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 59.272812]
[ 59.273211] The buggy address belongs to the object at ffff8883cbdd3200
[ 59.273211] which belongs to the cache kmalloc-512 of size 512
[ 59.275838] The buggy address is located 408 bytes inside of
[ 59.275838] 512-byte region [ffff8883cbdd3200, ffff8883cbdd3400)
[ 59.278151] The buggy address belongs to the page:
[ 59.279215] page:ffffea000f2f7400 refcount:1 mapcount:0 mapping:ffff8883ecc0ce00 index:0x0 compound_mapcount: 0
[ 59.281449] flags: 0x200000000010200(slab|head)
[ 59.282356] raw: 0200000000010200 ffffea000f2f3a08 ffffea000f2fd608 ffff8883ecc0ce00
[ 59.283949] raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000
[ 59.285608] page dumped because: kasan: bad access detected
[ 59.286981]
[ 59.287337] Memory state around the buggy address:
[ 59.288310] ffff8883cbdd3280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.289763] ffff8883cbdd3300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.291452] >ffff8883cbdd3380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.292945] ^
[ 59.293815] ffff8883cbdd3400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 59.295220] ffff8883cbdd3480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 59.296872] ==================================================================
Fixes: da58f90f11f5 ("netdevsim: Add devlink-trap support")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: syzbot+9ed8f68ab30761f3678e@syzkaller.appspotmail.com
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When rxrpc_recvmsg_data() sets the return value to 1 because it's drained
all the data for the last packet, it checks the last-packet flag on the
whole packet - but this is wrong, since the last-packet flag is only set on
the final subpacket of the last jumbo packet. This means that a call that
receives its last packet in a jumbo packet won't complete properly.
Fix this by having rxrpc_locate_data() determine the last-packet state of
the subpacket it's looking at and passing that back to the caller rather
than having the caller look in the packet header. The caller then needs to
cache this in the rxrpc_call struct as rxrpc_locate_data() isn't then
called again for this packet.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Fixes: e2de6c404898 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just two fixes:
* HT operation is not allowed on channel 14 (Japan only)
* netlink policy for nexthop attribute was wrong
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When disabling an endpoint which has cancelled requests, we should
make sure to giveback requests that are currently pending in the
cancelled list, otherwise we may fall into a situation where command
completion interrupt fires after endpoint has been disabled, therefore
causing a splat.
Fixes: fec9095bdef4 "usb: dwc3: gadget: remove wait_end_transfer"
Reported-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Link: https://lore.kernel.org/r/20191031090713.1452818-1-felipe.balbi@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This code causes a static analysis warning:
block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'
We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish(). IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was
switching aux to TBT mode for all combo-phy ports, happily this did
not caused any issue but is better follow BSpec.
Also this is reserved bit before ICL.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: e9b7e1422d40 ("drm/i915: Sanitize the terminology used for TypeC port modes")
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029011014.286885-1-jose.souza@intel.com
|
|
Recent GuC doesn't require the shared area. We still have one user in
i915 (engine reset via guc) because we haven't updated the command to
match the current guc submission flow [1]. Since the flow in guc is
about to change again, just disable the command for now and add a note
that we'll implement it as part of the new flow.
[1] https://patchwork.freedesktop.org/patch/295038/
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-2-daniele.ceraolospurio@intel.com
|
|
Recent GuC binaries (including all the ones we're currently using)
don't require this shared area anymore, having moved the relevant
entries into the stage pool instead. i915 itself doesn't write
anything into it either, so we can safely drop it.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-1-daniele.ceraolospurio@intel.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Second set of IIO fixes for the 5.4 cycle.
* adis16480
- Prevent negative numbers being accepted for sampling frequency.
* inv_mpu6050
- Fix an issue where fifo overflow bits don't actually work as expected,
by checking the fifo count instead.
* srf04
- Allow more time for echo to signal as some sensors supported have
a higher range.
* stm32-adc
- Fix a potential race in dma disable by ensuring all transfers are done.
* tag 'iio-fixes-for-5.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: stm32-adc: fix stopping dma
iio: imu: inv_mpu6050: fix no data on MPU6050
iio: srf04: fix wrong limitation in distance measuring
iio: imu: adis16480: make sure provided frequency is positive
|
|
The idle time reported in /proc/stat sometimes incorrectly contains
huge values on s390. This is caused by a bug in arch_cpu_idle_time().
The kernel tries to figure out when a different cpu entered idle by
accessing its per-cpu data structure. There is an ordering problem: if
the remote cpu has an idle_enter value which is not zero, and an
idle_exit value which is zero, it is assumed it is idle since
"now". The "now" timestamp however is taken before the idle_enter
value is read.
Which in turn means that "now" can be smaller than idle_enter of the
remote cpu. Unconditionally subtracting idle_enter from "now" can thus
lead to a negative value (aka large unsigned value).
Fix this by moving the get_tod_clock() invocation out of the
loop. While at it also make the code a bit more readable.
A similar bug also exists for show_idle_time(). Fix this is as well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
unwind_for_each_frame stops after the first frame if regs->gprs[15] <=
sp.
The reason is that in case regs are specified, the first frame should be
regs->psw.addr and the second frame should be sp->gprs[8]. However,
currently the second frame is regs->gprs[15], which confuses
outside_of_stack().
Fix by introducing a flag to distinguish this special case from
unwinding the interrupt handler, for which the current behavior is
appropriate.
Fixes: 78c98f907413 ("s390/unwind: introduce stack unwind API")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The problem is that we were putting the NUL terminator too far:
buf[sizeof(buf) - 1] = '\0';
If the user input isn't NUL terminated and they haven't initialized the
whole buffer then it leads to an info leak. The NUL terminator should
be:
buf[len - 1] = '\0';
Signed-off-by: Yihui Zeng <yzeng56@asu.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[heiko.carstens@de.ibm.com: keep semantics of how *lenp and *ppos are handled]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In order to keep the assert_bind_count() valid, we need to hold the vma
page reference until after we drop the bind count. However, we must also
keep the drm_mm_remove_node() as the last action of i915_vma_unbind() so
that it serialises with the unlocked check inside i915_vma_destroy(). So
we need to split up i915_vma_remove() so that we order the detach, drop
pages and remove as required during unbind.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112067
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030192159.18404-1-chris@chris-wilson.co.uk
|
|
If the idle_pulse fails to flush the i915_active, dump the tree to see
if that has any clues.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031101116.19894-1-chris@chris-wilson.co.uk
|
|
When checking the heartbeat pulse, we expect it to have been sent by the
time we have slept. We can verify this by checking the engine serial
number to see if that matches the predicted pulse serial. It will always
be true if, and only if, the pulse was sent by itself (as designed by
the test).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031094259.23028-1-chris@chris-wilson.co.uk
|
|
To avoid accidentally breaking things in the future add a
comment explaining why we misconfigure the pipe_mask.
Also toss in a TODO for investigating a single encoder
approach as opposed to the encoder-per-pipe approach.
v2: Drop a bogus TODO comment
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-6-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
Just set pipe_mask=~0 for the non-special cases where any pipe
will do. intel_encoder_possible_crtcs() will anyway drop out
anything that doesn't exist.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-5-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
There are no longer any pipe<->DSI port limitations on icl+.
Populate the pipe_mask accordingly.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-4-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Rename the encoder->crtc_mask to encoder->pipe_mask to better
reflect what it actually contains.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-3-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
We don't need to special case PCH vs. gen4 when setting up the LVDS
crtc_mask. Just claim pipes A|B|C work and
intel_encoder_possible_crtcs() will drop out any crtc that doesn't
exist.
v2: Put the special case first to match what most other encoders do
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
The Kryo cores share errata 1009 with Falkor, so add their model
definitions and enable it for them as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[will: Update entry in silicon-errata.rst]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
VMX already does so if the host has SMEP, in order to support the combination of
CR0.WP=1 and CR4.SMEP=1. However, it is perfectly safe to always do so, and in
fact VMX already ends up running with EFER.NXE=1 on old processors that lack the
"load EFER" controls, because it may help avoiding a slow MSR write. Removing
all the conditionals simplifies the code.
SVM does not have similar code, but it should since recent AMD processors do
support SMEP. So this patch also makes the code for the two vendors more similar
while fixing NPT=0, CR0.WP=1 and CR4.SMEP=1 on AMD processors.
Cc: stable@vger.kernel.org
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In kvm_create_vm(), if we've successfully called kvm_arch_init_vm(), but
then fail later in the function, we need to call kvm_arch_destroy_vm()
so that it can do any necessary cleanup (like freeing memory).
Fixes: 44a95dae1d229a ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
[Remove dependency on "kvm: Don't clear reference count on
kvm_create_vm() error path" which was not committed. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The driver exposes EFI runtime services to user-space through an IOCTL
interface, calling the EFI services function pointers directly without
using the efivar API.
Disallow access to the /dev/efi_test character device when the kernel is
locked down to prevent arbitrary user-space to call EFI runtime services.
Also require CAP_SYS_ADMIN to open the chardev to prevent unprivileged
users to call the EFI runtime services, instead of just relying on the
chardev file mode bits for this.
The main user of this driver is the fwts [0] tool that already checks if
the effective user ID is 0 and fails otherwise. So this change shouldn't
cause any regression to this tool.
[0]: https://wiki.ubuntu.com/FirmwareTestSuite/Reference/uefivarinfo
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Matthew Garrett <mjg59@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-7-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, kernel fails to boot on some HyperV VMs when using EFI.
And it's a potential issue on all x86 platforms.
It's caused by broken kernel relocation on EFI systems, when below three
conditions are met:
1. Kernel image is not loaded to the default address (LOAD_PHYSICAL_ADDR)
by the loader.
2. There isn't enough room to contain the kernel, starting from the
default load address (eg. something else occupied part the region).
3. In the memmap provided by EFI firmware, there is a memory region
starts below LOAD_PHYSICAL_ADDR, and suitable for containing the
kernel.
EFI stub will perform a kernel relocation when condition 1 is met. But
due to condition 2, EFI stub can't relocate kernel to the preferred
address, so it fallback to ask EFI firmware to alloc lowest usable memory
region, got the low region mentioned in condition 3, and relocated
kernel there.
It's incorrect to relocate the kernel below LOAD_PHYSICAL_ADDR. This
is the lowest acceptable kernel relocation address.
The first thing goes wrong is in arch/x86/boot/compressed/head_64.S.
Kernel decompression will force use LOAD_PHYSICAL_ADDR as the output
address if kernel is located below it. Then the relocation before
decompression, which move kernel to the end of the decompression buffer,
will overwrite other memory region, as there is no enough memory there.
To fix it, just don't let EFI stub relocate the kernel to any address
lower than lowest acceptable address.
[ ardb: introduce efi_low_alloc_above() to reduce the scope of the change ]
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-6-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The EFI stubloader for ARM starts out by allocating a 32 MB window
at the base of RAM, in order to ensure that the decompressor (which
blindly copies the uncompressed kernel into that window) does not
overwrite other allocations that are made while running in the context
of the EFI firmware.
In some cases, (e.g., U-Boot running on the Raspberry Pi 2), this is
causing boot failures because this initial allocation conflicts with
a page of reserved memory at the base of RAM that contains the SMP spin
tables and other pieces of firmware data and which was put there by
the bootloader under the assumption that the TEXT_OFFSET window right
below the kernel is only used partially during early boot, and will be
left alone once the memory reservations are processed and taken into
account.
So let's permit reserved memory regions to exist in the region starting
at the base of RAM, and ending at TEXT_OFFSET - 5 * PAGE_SIZE, which is
the window below the kernel that is not touched by the early boot code.
Tested-by: Guillaume Gardet <Guillaume.Gardet@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Chester Lin <clin@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-5-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit 428826f5358c ("fdt: add support for rng-seed") introduced
add_bootloader_randomness(), permitting randomness provided by the
bootloader or firmware to be credited as entropy. However, the fact
that the UEFI support code was already wired into the RNG subsystem
via a call to add_device_randomness() was overlooked, and so it was
not converted at the same time.
Note that this UEFI (v2.4 or newer) feature is currently only
implemented for EFI stub booting on ARM, and further note that
CONFIG_RANDOM_TRUST_BOOTLOADER must be enabled, and this should be
done only if there indeed is sufficient trust in the bootloader
_and_ its source of randomness.
[ ardb: update commit log ]
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently nothing checks the return value of efi_tpm_eventlog_init(),
but in case that changes in the future make sure an error is
returned when it fails to determine the tpm final events log
size.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: e658c82be556 ("efi/tpm: Only set 'efi_tpm_final_log_size' after ...")
Link: https://lkml.kernel.org/r/20191029173755.27149-3-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For the EFI_RCI2_TABLE Kconfig option, 'make oldconfig' asks the user
for input on platforms where the option may not be applicable. This patch
modifies the Kconfig option to ask the user for input only when CONFIG_X86
or CONFIG_COMPILE_TEST is set to y.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Narendra K <Narendra.K@dell.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A few fixes to the dmaengine drivers:
- fix in sprd driver for link list and potential memory leak
- tegra transfer failure fix
- imx size check fix for script_number
- xilinx fix for 64bit AXIDMA and control reg update
- qcom bam dma resource leak fix
- cppi slave transfer fix when idle"
* tag 'dmaengine-fix-5.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idle
dmaengine: qcom: bam_dma: Fix resource leak
dmaengine: sprd: Fix the possible memory leak issue
dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config
dmaengine: xilinx_dma: Fix 64-bit simple AXIDMA transfer
dmaengine: imx-sdma: fix size check for sdma script_number
dmaengine: tegra210-adma: fix transfer failure
dmaengine: sprd: Fix the link-list pointer register configuration issue
|
|
Haiyang Zhang says:
====================
hv_netvsc: fix error handling in netvsc_attach/set_features
The error handling code path in these functions are not correct.
This patch set fixes them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If rndis_filter_open() fails, we need to remove the rndis device created
in earlier steps, before returning an error code. Otherwise, the retry of
netvsc_attach() from its callers will fail and hang.
Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an error is returned by rndis_filter_set_offload_params(), we should
still assign the unaffected features to ndev->features. Otherwise, these
features will be missing.
Fixes: d6792a5a0747 ("hv_netvsc: Add handler for LRO setting change")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Release resources when attaching to ULD fail. Otherwise, data
mismatch is seen between LLD and ULD later on, which lead to
kernel panic when accessing resources that should not even
exist in the first place.
Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We already annotated most accesses to sk->sk_napi_id
We missed sk_mark_napi_id() and sk_mark_napi_id_once()
which might be called without socket lock held in UDP stack.
KCSAN reported :
BUG: KCSAN: data-race in udpv6_queue_rcv_one_skb / udpv6_queue_rcv_one_skb
write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 0:
sk_mark_napi_id include/net/busy_poll.h:125 [inline]
__udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline]
udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672
udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689
udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832
__udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913
udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015
ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409
ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459
dst_input include/net/dst.h:442 [inline]
ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
napi_poll net/core/dev.c:6392 [inline]
net_rx_action+0x3ae/0xa90 net/core/dev.c:6460
write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 1:
sk_mark_napi_id include/net/busy_poll.h:125 [inline]
__udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline]
udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672
udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689
udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832
__udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913
udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015
ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409
ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459
dst_input include/net/dst.h:442 [inline]
ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 10890 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: e68b6e50fa35 ("udp: enable busy polling for all sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a card is disconnected while in use, the system waits until all
opened files are closed then releases the card. This is done via
put_device() of the card device in each device release code.
The recently reported mutex deadlock bug happens in this code path;
snd_timer_close() for the timer device deals with the global
register_mutex and it calls put_device() there. When this timer
device is the last one, the card gets freed and it eventually calls
snd_timer_free(), which has again the protection with the global
register_mutex -- boom.
Basically put_device() call itself is race-free, so a relative simple
workaround is to move this put_device() call out of the mutex. For
achieving that, in this patch, snd_timer_close_locked() got a new
argument to store the card device pointer in return, and each caller
invokes put_device() with the returned object after the mutex unlock.
Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
GuC 35.2.0 and HuC 7.0.3 are the first production releases for TGL.
GuC 35.2 for Gen12 is interface-compatible with 33.0 on older Gens,
because the differences are related to additional blocks/commands in
the interface to support new Gen12 features. These parts of the
interface will be added when the relevant features are enabled.
v2: fix typos (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191026003507.21769-1-daniele.ceraolospurio@intel.com
|
|
We use io_kiocb->result == -EAGAIN as a way to know if we need to
re-submit a polled request, as -EAGAIN reporting happens out-of-line
for IO submission failures. This field is cleared when we originally
allocate the request, but it isn't reset when we retry the submission
from async context. This can cause issues where we think something
needs a re-issue, but we're really just reading stale data.
Reset ->result whenever we re-prep a request for polled submission.
Cc: stable@vger.kernel.org
Fixes: 9e645e1105ca ("io_uring: add support for sqe links")
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit a69b0e855d3fd278ff6f09a23e1edf929538e304.
This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.
[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements
Fixes: a69b0e855d3f ("dma-buf: Add dma-buf heaps framework")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-6-sean@poorly.run
|
|
This reverts commit 7b87ea704fd9606eaafa9150116536d72f5c4b1f.
This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.
[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements
Fixes: 7b87ea704fd9 ("dma-buf: heaps: Add heap helpers")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-5-sean@poorly.run
|
|
This reverts commit 47a32f9c12266d450b92089148c6039591bd9909.
This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.
[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements
Fixes: 47a32f9c1226 ("dma-buf: heaps: Add system heap to dmabuf heaps")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-4-sean@poorly.run
|
|
This reverts commit 43d7238fb9ac897b29912368b3359e72bae469c4.
This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.
[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements
Fixes: 43d7238fb9ac ("dma-buf: heaps: Add CMA heap to dmabuf heaps")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-3-sean@poorly.run
|
