| Age | Commit message (Collapse) | Author |
|---|
|
Implement a simple TAP-based test engine in bash and a few basic tests
using it, to be used to check for bugs and regressions.
A new "check" target is added to the rtla Makefile that runs the test suite
using the "prove" command implemented by Test::Harness.
The only test format currently supported is running rtla with defined
command arguments per test, checking its exit code. In case the exit
code is non-zero, the output of rtla is displayed, together with the
exit code.
The test cases are adopted from rtla tests in the Continuous Kernel
Integration (CKI) project [1] with the authors' approval.
[1] https://gitlab.com/redhat/centos-stream/tests/kernel/kernel-tests/-/blob/main/rt-tests/us/rtla/
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Chang Yin <cyin@redhat.com>
Cc: Qiao Zhao <qzhao@redhat.com>
Link: https://lore.kernel.org/20250120135630.802111-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
RV per-task monitors are implemented through a monitor structure
available for each task_struct. This structure is reset every time the
monitor is (re-)started, to avoid inconsistencies if the monitor was
activated previously.
To do so, we reset the monitor on all threads using the macro
for_each_process_thread. However, this macro excludes the idle tasks on
each CPU. Idle tasks could be considered tasks on their own right and it
should be up to the model whether to ignore them or not.
Reset monitors also on the idle tasks for each present CPU whenever we
reset all per-task monitors.
Cc: stable@vger.kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250115151547.605750-2-gmonaco@redhat.com
Fixes: 792575348ff7 ("rv/include: Add deterministic automata monitor definition via C macros")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Toggling memory enable is free on bare metal, but potentially expensive
in virtualized environments as the device MMIO spaces are added and
removed from the VM address space, including DMA mapping of those spaces
through the IOMMU where peer-to-peer is supported. Currently memory
decode is disabled around sizing each individual BAR, even for SR-IOV
BARs while VF Enable is cleared.
This can be better optimized for virtual environments by sizing a set
of BARs at once, stashing the resulting mask into an array, while only
toggling memory enable once. This also naturally improves the SR-IOV
path as the caller becomes responsible for any necessary decode disables
while sizing BARs, therefore SR-IOV BARs are sized relying only on the
VF Enable rather than toggling the PF memory enable in the command
register.
Link: https://lore.kernel.org/r/20250120182202.1878581-1-alex.williamson@redhat.com
Reported-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Link: https://lore.kernel.org/r/CAHTA-uYp07FgM6T1OZQKqAdSA5JrZo0ReNEyZgQZub4mDRrV5w@mail.gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Reviewed-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A regression was caused by commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL
after job completion"), but this commit is not yet in next-fixes,
fast-forward it.
Try #2, first one didn't have v6.13 in it.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.14
- New machines
* IBM SPB1 AST2600 BMC machine, a Sapphire Rapids x86 server
* Ampre Mt Jefferson AST2600 BMC
- Updates to mtmitchell, rainier, blueridge, everest, fuji, system1,
harma, catalina and minerva
- A big rework of yosemite4
* tag 'aspeed-6.14-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (55 commits)
ARM: dts: aspeed: yosemite4: adjust secondary flash name
ARM: dts: aspeed: system1: Use crps PSU driver
ARM: dts: aspeed: minerva: add second source RTC
ARM: dts: aspeed: minerva: add bmc ready led setting
ARM: dts: aspeed: minerva: add i/o expanders on each FCB
ARM: dts: aspeed: minerva: add i/o expanders on bus 0
ARM: dts: aspeed: catalina: remove interrupt of GPIOB4 form all IOEXP
ARM: dts: aspeed: catalina: revise ltc4287 shunt-resistor value
arm: dts: aspeed: Blueridge and Rainer: Add VRM presence GPIOs
ARM: dts: aspeed: Blueridge and Fuji: Fix LED node names
arm: dts: aspeed: Everest and Fuji: Add VRM presence gpio expander
ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
dt-bindings: arm: aspeed: add IBM SBP1 board
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC
dt-bindings: arm: aspeed: add Mt. Jefferson board
ARM: dts: aspeed: yosemite4: Add i2c-mux for ADC monitor on Spider Board
ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Fan Boards
ARM: dts: aspeed: yosemite4: Change the address of Fan IC on fan boards
ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards
ARM: dts: aspeed: yosemite4: correct the compatible string for max31790
...
Link: https://lore.kernel.org/r/CACPK8Xe8yZLXzEQPp=1D2f0TsKA7hBZG=pHHW6U51FMpp_BiRQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/newsoc
RISC-V SpacemiT DT changes for 6.14
This adds support for the SpacemiT K1 SoC and the Banana Pi F3
board using it:
- basic device tree support
- pinctrl dt node info
- update MAINTAINERS info
* tag 'spacemit-dt-for-6.14-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: move aliases to board dts
riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3
riscv: defconfig: enable SpacemiT SoC
riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
riscv: dts: add initial SpacemiT K1 SoC device tree
riscv: add SpacemiT SoC family Kconfig support
dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
dt-bindings: timer: Add SpacemiT K1 CLINT
dt-bindings: riscv: add SpacemiT K1 bindings
dt-bindings: riscv: Add SpacemiT X60 compatibles
MAINTAINERS: setup support for SpacemiT SoC tree
Link: https://wiki.banana-pi.org/Banana_Pi_BPI-F3
Link: https://www.spacemit.com/en/key-stone-k1/
Link: https://lore.kernel.org/r/20250117004911-GYA25021@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities updates from Serge Hallyn:
- remove the cap_mmap_file() hook, as it simply returned the default
return value and so doesn't need to exist (Paul Moore)
- add a trace event for cap_capable() (Jordan Rome)
* tag 'caps-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
security: add trace event for cap_capable
capabilities: remove cap_mmap_file()
|
|
In mchp_core_pwm_apply_locked(), if hw_period_steps is equal to its max,
an error is reported and .apply fails. The max value is actually a
permitted value however, and so this check can fail where multiple
channels are enabled.
For example, the first channel to be configured requests a period that
sets hw_period_steps to the maximum value, and when a second channel
is enabled the driver reads hw_period_steps back from the hardware and
finds it to be the maximum possible value, triggering the warning on a
permitted value. The value to be avoided is 255 (PERIOD_STEPS_MAX + 1),
as that will produce undesired behaviour, so test for greater than,
rather than equal to.
Fixes: 2bf7ecf7b4ff ("pwm: add microchip soft ip corePWM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250122-pastor-fancied-0b993da2d2d2@spud
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
A regression was caused by commit e4b5ccd392b9 ("drm/v3d: Ensure job
pointer is set to NULL after job completion"), but this commit is not
yet in next-fixes, fast-forward it.
Note that this recreates Linus merge in 96c84703f1cf ("Merge tag
'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel")
because I didn't want to backmerge a random point in the merge window.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
- Set `compressedblks = 1` directly for non-bigpcluster cases. This
simplifies the logic a bit since lcluster sizes larger than one block
are unsupported and the details remain unclear.
- For Z_EROFS_LCLUSTER_TYPE_PLAIN pclusters, avoid assuming
`compressedblks = 1` by default. Instead, check if
Z_EROFS_ADVISE_BIG_PCLUSTER_2 is set.
It basically has no impact to existing valid images, but it's useful to
find the gap to prepare for large PLAIN pclusters.
Link: https://lore.kernel.org/r/20250123090109.973463-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
efi_memattr_init() added a sanity check to avoid firmware caused corruption.
The check is based on efi memmap entry numbers, but kexec only takes the
runtime related memmap entries thus this caused many false warnings, see
below thread for details:
https://lore.kernel.org/all/20250108215957.3437660-2-usamaarif642@gmail.com/
Ard suggests to skip the efi memattr table in kexec, this makes sense because
those memattr fixups are not critical.
Fixes: 8fbe4c49c0cc ("efi/memattr: Ignore table if the size is clearly bogus")
Cc: <stable@vger.kernel.org> # v6.13+
Reported-by: Breno Leitao <leitao@debian.org>
Reported-and-tested-by: Usama Arif <usamaarif642@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The following failure was reported on HPE ProLiant D320:
[ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0)
[ 10.848132][ T1] ------------[ cut here ]------------
[ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330
[ 10.862827][ T1] Modules linked in:
[ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375
[ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024
[ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330
[ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1
[ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246
[ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000
[ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0
The above transcript shows that ACPI pointed a 16 MiB buffer for the log
events because RSI maps to the 'order' parameter of __alloc_pages_noprof().
Address the bug by moving from devm_kmalloc() to devm_add_action() and
kvmalloc() and devm_add_action().
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org # v2.6.16+
Fixes: 55a82ab3181b ("[PATCH] tpm: add bios measurement log")
Reported-by: Andy Liang <andy.liang@hpe.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219495
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Andy Liang <andy.liang@hpe.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Removing the bochs PCI device should mark the DRM device as unplugged
without removing it. Hence clear the respective call to drm_dev_put()
from bochs_pci_remove().
Fixes a double unref in devm_drm_dev_init_release(). An example error
message is shown below:
[ 32.958338] BUG: KASAN: use-after-free in drm_dev_put.part.0+0x1b/0x90
[ 32.958850] Write of size 4 at addr ffff888152134004 by task (udev-worker)/591
[ 32.959574] CPU: 3 UID: 0 PID: 591 Comm: (udev-worker) Tainted: G E 6.13.0-rc2-1-default+ #3417
[ 32.960316] Tainted: [E]=UNSIGNED_MODULE
[ 32.960637] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[ 32.961429] Call Trace:
[ 32.961433] <TASK>
[ 32.961439] dump_stack_lvl+0x68/0x90
[ 32.961452] print_address_description.constprop.0+0x88/0x330
[ 32.961461] ? preempt_count_sub+0x14/0xc0
[ 32.961473] print_report+0xe2/0x1d0
[ 32.961479] ? srso_alias_return_thunk+0x5/0xfbef5
[ 32.963725] ? __virt_addr_valid+0x143/0x320
[ 32.964077] ? srso_alias_return_thunk+0x5/0xfbef5
[ 32.964463] ? drm_dev_put.part.0+0x1b/0x90
[ 32.964817] kasan_report+0xce/0x1a0
[ 32.965123] ? drm_dev_put.part.0+0x1b/0x90
[ 32.965474] kasan_check_range+0xff/0x1c0
[ 32.965806] drm_dev_put.part.0+0x1b/0x90
[ 32.966138] release_nodes+0x84/0xc0
[ 32.966447] devres_release_all+0xd2/0x110
[ 32.966788] ? __pfx_devres_release_all+0x10/0x10
[ 32.967177] ? preempt_count_sub+0x14/0xc0
[ 32.967523] device_unbind_cleanup+0x16/0xc0
[ 32.967886] really_probe+0x1b7/0x570
[ 32.968207] __driver_probe_device+0xca/0x1b0
[ 32.968568] driver_probe_device+0x4a/0xf0
[ 32.968907] __driver_attach+0x10b/0x290
[ 32.969239] ? __pfx___driver_attach+0x10/0x10
[ 32.969598] bus_for_each_dev+0xc0/0x110
[ 32.969923] ? __pfx_bus_for_each_dev+0x10/0x10
[ 32.970291] ? bus_add_driver+0x17a/0x2b0
[ 32.970622] ? srso_alias_return_thunk+0x5/0xfbef5
[ 32.971011] bus_add_driver+0x19a/0x2b0
[ 32.971335] driver_register+0xd8/0x160
[ 32.971671] ? __pfx_bochs_pci_driver_init+0x10/0x10 [bochs]
[ 32.972130] do_one_initcall+0xba/0x390
[...]
After unplugging the DRM device, clients will close their references.
Closing the final reference will also release the DRM device.
Reported-by: Dr. David Alan Gilbert <dave@treblig.org>
Closes: https://lore.kernel.org/lkml/Z18dbfDAiFadsSdg@gallifrey/
Fixes: 04826f588682 ("drm/bochs: Allocate DRM device in struct bochs_device")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux.dev
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103095615.231162-1-tzimmermann@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull AT_EXECVE_CHECK from Kees Cook:
- Implement AT_EXECVE_CHECK flag to execveat(2) (Mickaël Salaün)
- Implement EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits
(Mickaël Salaün)
- Add selftests and samples for AT_EXECVE_CHECK (Mickaël Salaün)
* tag 'AT_EXECVE_CHECK-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ima: instantiate the bprm_creds_for_exec() hook
samples/check-exec: Add an enlighten "inc" interpreter and 28 tests
selftests: ktap_helpers: Fix uninitialized variable
samples/check-exec: Add set-exec
selftests/landlock: Add tests for execveat + AT_EXECVE_CHECK
selftests/exec: Add 32 tests for AT_EXECVE_CHECK and exec securebits
security: Add EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits
exec: Add a new AT_EXECVE_CHECK flag to execveat(2)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- stackleak: Use str_enabled_disabled() helper (Thorsten Blum)
- Document GCC INIT_STACK_ALL_PATTERN behavior (Geert Uytterhoeven)
- Add task_prctl_unknown tracepoint (Marco Elver)
* tag 'hardening-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
hardening: Document INIT_STACK_ALL_PATTERN behavior with GCC
stackleak: Use str_enabled_disabled() helper in stack_erasing_sysctl()
tracing: Remove pid in task_rename tracing output
tracing: Add task_prctl_unknown tracepoint
|
|
Pull tomoyo updates from Tetsuo Handa:
"Small changes to improve usability"
* tag 'tomoyo-pr-20250123' of git://git.code.sf.net/p/tomoyo/tomoyo:
tomoyo: automatically use patterns for several situations in learning mode
tomoyo: use realpath if symlink's pathname refers to procfs
tomoyo: don't emit warning in tomoyo_write_control()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This mostly factors out some Landlock code and prepares for upcoming
audit support.
Because files with invalid modes might be visible after filesystem
corruption, Landlock now handles those weird files too.
A few sample and test issues are also fixed"
* tag 'landlock-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.umount_sandboxer tests
selftests/landlock: Add wrappers.h
selftests/landlock: Fix error message
landlock: Optimize file path walks and prepare for audit support
selftests/landlock: Add test to check partial access in a mount tree
landlock: Align partial refer access checks with final ones
landlock: Simplify initially denied access rights
landlock: Move access types
landlock: Factor out check_access_path()
selftests/landlock: Fix build with non-default pthread linking
landlock: Use scoped guards for ruleset in landlock_add_rule()
landlock: Use scoped guards for ruleset
landlock: Constify get_mode_access()
landlock: Handle weird files
samples/landlock: Fix possible NULL dereference in parse_path()
selftests/landlock: Remove unused macros in ptrace_test.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits)
MAINTAINERS: add entry for CRC library
powerpc/crc: delete obsolete crc-vpmsum_test.c
lib/crc32test: delete obsolete crc32test.c
lib/crc16_kunit: delete obsolete crc16_kunit.c
lib/crc_kunit.c: add KUnit test suite for CRC library functions
powerpc/crc-t10dif: expose CRC-T10DIF function through lib
arm64/crc-t10dif: expose CRC-T10DIF function through lib
arm/crc-t10dif: expose CRC-T10DIF function through lib
x86/crc-t10dif: expose CRC-T10DIF function through lib
crypto: crct10dif - expose arch-optimized lib function
lib/crc-t10dif: add support for arch overrides
lib/crc-t10dif: stop wrapping the crypto API
scsi: target: iscsi: switch to using the crc32c library
f2fs: switch to using the crc32 library
jbd2: switch to using the crc32c library
ext4: switch to using the crc32c library
lib/crc32: make crc32c() go directly to lib
bcachefs: Explicitly select CRYPTO from BCACHEFS_FS
x86/crc32: expose CRC32 functions through lib
x86/crc32: update prototype for crc32_pclmul_le_16()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys updates from Jarkko Sakkinen.
Avoid using stack addresses for sg lists. And a cleanup.
* tag 'keys-next-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: dcp: fix improper sg use with CONFIG_VMAP_STACK=y
keys: drop shadowing dead prototype
|
|
If the server doesn't support both EAs and reparse point in a file,
the SMB2_QUERY_INFO request will fail with either
STATUS_NO_EAS_ON_FILE or STATUS_EAS_NOT_SUPPORT in the compound chain,
so ignore it as long as reparse point isn't
IO_REPARSE_TAG_LX_(CHR|BLK), which would require the EAs to know about
major/minor numbers.
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The matching of DFS connections is already handled by @dfs_conn, so
remove @leaf_fullpath matching altogether.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
TCP_Server_Info::leaf_fullpath is allocated in cifs_get_tcp_session()
and never changed afterwards, so there is no need to serialize its
access.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The following two 'check only recovery' processes are very dependent on
the return value of f2fs_recover_fsync_data, especially when the return
value is greater than 0.
1. when device has readonly mode, shown as commit
23738e74472f ("f2fs: fix to restrict mount condition on readonly block device")
2. mount optiont NORECOVERY or DISABLE_ROLL_FORWARD is set, shown as commit
6781eabba1bd ("f2fs: give -EINVAL for norecovery and rw mount")
However, commit c426d99127b1 ("f2fs: Check write pointer consistency of open zones")
will change the return value unexpectedly, thereby changing the caller's behavior
This patch let the f2fs_recover_fsync_data return correct value,and not do
f2fs_check_and_fix_write_pointer when the device is read-only.
Fixes: c426d99127b1 ("f2fs: Check write pointer consistency of open zones")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Now f2fs_invalidate_blocks() supports a continuous range of addresses,
so the for loop can be omitted.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Show mtime in segment_bits for debug.
cat /proc/fs//f2fs/loop0/segment_bits
format: segment_type|valid_blocks|bitmaps|mtime
segment_type(0:HD, 1:WD, 2:CD, 3:HN, 4:WN, 5:CN)
0 3|1 | 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ffffffffffffffff
1 4|3 | 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ffffffffffffffff
2 5|0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ffffffffffffffff
3 0|1 | 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ffffffffffffffff
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
syzbot reported a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/gc.c:373!
CPU: 0 UID: 0 PID: 5316 Comm: syz.0.0 Not tainted 6.13.0-rc3-syzkaller-00044-gaef25be35d23 #0
RIP: 0010:get_cb_cost fs/f2fs/gc.c:373 [inline]
RIP: 0010:get_gc_cost fs/f2fs/gc.c:406 [inline]
RIP: 0010:f2fs_get_victim+0x68b1/0x6aa0 fs/f2fs/gc.c:912
Call Trace:
<TASK>
__get_victim fs/f2fs/gc.c:1707 [inline]
f2fs_gc+0xc89/0x2f60 fs/f2fs/gc.c:1915
f2fs_ioc_gc fs/f2fs/file.c:2624 [inline]
__f2fs_ioctl+0x4cc9/0xb8b0 fs/f2fs/file.c:4482
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
w/ below testcase, it can reproduce directly:
- dd if=/dev/zero of=/tmp/file bs=1M count=64
- mkfs.f2fs /tmp/file
- mount -t f2fs -o loop,mode=fragment:block /tmp/file /mnt/f2fs
- echo 0 > /sys/fs/f2fs/loop0/min_ssr_sections
- dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=5
- umount /mnt/f2fs
- for((i=4096;i<16384;i+=512)) do inject.f2fs --sit 0 --blk $i --mb mtime --val -1 /tmp/file; done
- mount -o loop /tmp/file /mnt/f2fs
- f2fs_io gc 0 /mnt/f2fs/file
static unsigned int get_cb_cost()
{
...
mtime = f2fs_get_section_mtime(sbi, segno);
f2fs_bug_on(sbi, mtime == INVALID_MTIME);
...
}
The root cause is: mtime in f2fs_sit_entry can be fuzzed to INVALID_MTIME,
then it will trigger BUG_ON in get_cb_cost() during GC.
Let's change behavior of f2fs_get_section_mtime() as below for fix:
- return INVALID_MTIME only if total valid blocks is zero.
- return INVALID_MTIME - 1 if average mtime calculated is
INVALID_MTIME.
Fixes: b19ee7272208 ("f2fs: introduce f2fs_get_section_mtime")
Reported-by: syzbot+b9972806adbe20a910eb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/6768c82e.050a0220.226966.0035.GAE@google.com
Cc: liuderong <liuderong@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When building for 32-bit platforms, for which 'size_t' is 'unsigned int',
there is a warning due to an incorrect format specifier:
fs/f2fs/inode.c:320:6: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
318 | f2fs_warn(sbi, "%s: inode (ino=%lx) has corrupted i_inline_xattr_size: %d, min: %lu, max: %lu",
| ~~~
| %u
319 | __func__, inode->i_ino, fi->i_inline_xattr_size,
320 | MIN_INLINE_XATTR_SIZE, MAX_INLINE_XATTR_SIZE);
| ^~~~~~~~~~~~~~~~~~~~~
fs/f2fs/f2fs.h:1855:46: note: expanded from macro 'f2fs_warn'
1855 | f2fs_printk(sbi, false, KERN_WARNING fmt, ##__VA_ARGS__)
| ~~~ ^~~~~~~~~~~
fs/f2fs/xattr.h:86:31: note: expanded from macro 'MIN_INLINE_XATTR_SIZE'
86 | #define MIN_INLINE_XATTR_SIZE (sizeof(struct f2fs_xattr_header) / sizeof(__le32))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the format specifier for 'size_t', '%zu', to resolve the warning.
Fixes: 5c1768b67250 ("f2fs: fix to do sanity check correctly on i_inline_xattr_size")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Fix C&P error left unnoticed during the reviews. The FORMAT field spans
over bits 29-31, not 24-27 of the CTR register.
Closes: https://lore.kernel.org/linux-arm-msm/01515ea0-c6f0-479f-9da5-764d9ee79ed6@samsung.com/
Fixes: a9ff94477836 ("ARM: 9433/2: implement cacheinfo support")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
- add support for waitid()
- use waitid() over waitpid()
- use a pipe in vfprintf tests
- skip tests for unimplemented syscalls
- rename riscv to riscv64
- add configurations for riscv32
- add detecting missing toolchain to run-tests.sh
* tag 'linux_kselftest-nolibc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/nolibc: add configurations for riscv32
selftests/nolibc: rename riscv to riscv64
selftests/nolibc: skip tests for unimplemented syscalls
selftests/nolibc: use a pipe to in vfprintf tests
selftests/nolibc: use waitid() over waitpid()
tools/nolibc: add support for waitid()
selftests/nolibc: run-tests.sh: detect missing toolchain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- fix struct completion warning
- introduce autorun option
- add fallback for os.sched_getaffinity
- enable hardware acceleration when available
* tag 'linux_kselftest-kunit-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Introduce autorun option
kunit: enable hardware acceleration when available
kunit: add fallback for os.sched_getaffinity
kunit: platform: Resolve 'struct completion' warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- fixes, reporting improvements, and cleanup changes to several tests
- add support for DT_GNU_HASH to selftests/vDSO
* tag 'linux_kselftest-next-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/rseq: Fix handling of glibc without rseq support
selftests/resctrl: Discover SNC kernel support and adjust messages
selftests/resctrl: Adjust effective L3 cache size with SNC enabled
selftests/ftrace: Make uprobe test more robust against binary name
selftests/ftrace: Fix to use remount when testing mount GID option
selftests: tmpfs: Add kselftest support to tmpfs
selftests: tmpfs: Add Test-skip if not run as root
selftests: harness: fix printing of mismatch values in __EXPECT()
selftests/ring-buffer: Add test for out-of-bound pgoff mapping
selftests/run_kselftest.sh: Fix help string for --per-test-log
selftests: acct: Add ksft_exit_skip if not running as root
selftests: kselftest: Fix the wrong format specifier
selftests: timers: clocksource-switch: Adapt progress to kselftest framework
selftests/zram: gitignore output file
selftests/filesystems: Add missing gitignore file
selftests: Warn about skipped tests in result summary
selftests: kselftest: Add ksft_test_result_xpass
selftests/vDSO: support DT_GNU_HASH
selftests/ipc: Remove unused variables
selftest: media_tests: fix trivial UAF typo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- more conversions to the guard notation in the input core
- a fix for NXP BBNSM power key driver to clean up wake IRQ after
unbinding
- several new vendor/device ID pairs added to xpad game controller
driver
- several drivers switched to using str_enable_disable and similar
helpers instead of open-coding
- add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut
works out of the box (if userspace is ready to handle it)
- evbug input handler has been removed (debugging through evdev is
strongly preferred to dumping all events into the kernel log).
* tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits)
Input: synaptics - fix crash when enabling pass-through port
Input: atkbd - map F23 key to support default copilot shortcut
Input: xpad - add support for Nacon Evol-X Xbox One Controller
Input: xpad - add unofficial Xbox 360 wireless receiver clone
Input: xpad - add support for wooting two he (arm)
Input: xpad - improve name of 8BitDo controller 2dc8:3106
Input: xpad - add QH Electronics VID/PID
Input: joystick - use str_off_on() helper in sw_connect()
Input: Use str_enable_disable-like helpers
Input: use guard notation in input core
Input: poller - convert locking to guard notation
Input: mt - make use of __free() cleanup facility
Input: mt - convert locking to guard notation
Input: ff-memless - make use of __free() cleanup facility
Input: ff-memless - convert locking to guard notation
Input: ff-core - make use of __free() cleanup facility
Input: ff-core - convert locking to guard notation
Input: remove evbug driver
Input: mma8450 - add chip ID check in probe
Input: bbnsm_pwrkey - add remove hook
...
|
|
raw_spin_locks can be traced by lockdep or tracing itself. Atomic64
operations can be used in the tracing infrastructure. When an architecture
does not have true atomic64 operations it can use the generic version that
disables interrupts and uses spin_locks.
The tracing ring buffer code uses atomic64 operations for the time
keeping. But because some architectures use the default operations, the
locking inside the atomic operations can cause an infinite recursion.
As atomic64 implementation is architecture specific, it should not be
using raw_spin_locks() but instead arch_spin_locks as that is the purpose
of arch_spin_locks. To be used in architecture specific implementations of
generic infrastructure like atomic64 operations.
Note, by switching from raw_spin_locks to arch_spin_locks, the locks taken
to emulate the atomic64 operations will not have lockdep, mmio, or any
kind of checks done on them. They will not even disable preemption,
although the code will disable interrupts preventing the tasks that hold
the locks from being preempted. As the locks held are done so for very
short periods of time, and the logic is only done to emulate atomic64, not
having them be instrumented should not be an issue.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/20250122144311.64392baf@gandalf.local.home
Fixes: c84897c0ff592 ("ring-buffer: Remove 32bit timestamp logic")
Closes: https://lore.kernel.org/all/86fb4f86-a0e4-45a2-a2df-3154acc4f086@gaisler.com/
Reported-by: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- newly added support for Intel Touch Host Controller (Even Xu, Xinpeng
Sun)
- hid-core fix for long-standing syzbot-reported cornercase of
Resolution Multiplier not being present in any of the Logical
Collections in the device HID report descriptor (Alan Stern)
- improvement of behavior for non-standard LED brightness values for
Wacom driver (Jason Gerecke)
- PCI Wacom device support (depends on Intel THC support) (Even Xu)
- SteelSeries Arctis 9 support (Christian Mayer)
- constification of 'struct bin_attribute' in various HID driver
(Thomas Weißschuh)
- other assorted code cleanups / fixes and device ID additions
* tag 'hid-for-linus-2025012001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (63 commits)
HID: hid-asus: Disable OOBE mode on the ProArt P16
HID: steelseries: remove unnecessary return
HID: steelseries: export model and manufacturer
HID: steelseries: export charging state for the SteelSeries Arctis 9 headset
HID: steelseries: add SteelSeries Arctis 9 support
HID: steelseries: preparation for adding SteelSeries Arctis 9 support
HID: intel-thc-hid: fix build errors in um mode
HID: intel-thc-hid: intel-quicki2c: fix potential memory corruption
HID: intel-thc-hid: intel-thc: Fix error code in thc_i2c_subip_init()
HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch
HID: uclogic: make const read-only array touch_ring_model_params_buf static
HID: hid-steam: Make sure rumble work is canceled on removal
HID: Wacom: Add PCI Wacom device support
HID: intel-thc-hid: intel-quicki2c: Add PM implementation
HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver
HID: intel-thc-hid: intel-quicki2c: Add HIDI2C protocol implementation
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfaces
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver hid layer
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeleton
HID: intel-thc-hid: intel-quickspi: Add PM implementation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for Intel Panther Lake processors in multiple
places, modify Intel thermal drivers to stop selecting the user space
thermal governor which is not necessary for them to work any more and
clean up the thermal core somewhat:
- Add support for Panther Lake processors in multiple places (Zhang
Rui, Srinivas Pandruvada)
- Remove explicit user_space governor selection from Intel thermal
drivers (Srinivas Pandruvada)
- Rename a few things and relocate a comment in the thermal subsystem
(Rafael Wysocki)"
* tag 'thermal-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Rename function argument related to trip crossing
thermal: gov_bang_bang: Relocate regulation logic description
thermal: core: Rename callback functions in two governors
thermal: intel: Fix compile issue when CONFIG_NET is not defined
thermal: intel: int340x: Panther Lake power floor and workload hint support
thermal: intel: int340x: Panther Lake DLVR support
thermal: intel: Remove explicit user_space governor selection
ACPI: DPTF: Support Panther Lake
thermal: intel: int340x: processor: Enable MMIO RAPL for Panther Lake
powercap: intel_rapl: Add support for Panther Lake platform
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The most significant change here is replacing msleep() in
acpi_os_sleep() with usleep_range() to reduce spurious sleep time due
to timer inaccuracy which may spectacularly reduce the duration of
system suspend and resume transitions on some systems.
All of the other changes fall into the fixes and cleanups category
this time.
Specifics:
- Use usleep_range() instead of msleep() in acpi_os_sleep() to reduce
excessive delays due to timer inaccuracy, mostly affecting system
suspend and resume (Rafael Wysocki)
- Use str_enabled_disabled() string helpers in the ACPI tables
parsing code to make it easier to follow (Sunil V L)
- Update device properties parsing on systems using ACPI so that data
firmware nodes resulting from _DSD evaluation are treated as
available in firmware nodes walks (Sakari Ailus)
- Fix missing guid_t declaration in linux/prmt.h (Robert Richter)
- Update the GHES handling code to follow the global panic= policy
instead of overriding it by force-rebooting the system after a
fatal HW error has been reported (Borislav Petkov)
- Update messages printed by the ACPI battery driver to always refer
to driver extensions as "hooks" to avoid confusion with similar
functionality in the power supply subsystem in the future (Thomas
Weißschuh)
- Fix .probe() error path cleanup in the ACPI fan driver to avoid
memory leaks (Joe Hattori)
- Constify 'struct bin_attribute' in some places in the ACPI
subsystem and mark it as __ro_after_init in one place to prevent
binary blob attributes from being updated (Thomas Weißschuh)
- Add empty stubs for several ACPI-related symbols so that they can
be used when CONFIG_ACPI is unset and use them for removing
unnecessary conditional compilation from the ipu-bridge driver
(Ricardo Ribalda)"
* tag 'acpi-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
APEI: GHES: Have GHES honor the panic= setting
ACPI: PRM: Fix missing guid_t declaration in linux/prmt.h
ACPI: tables: Use string choice helpers
ACPI: property: Consider data nodes as being available
media: ipu-bridge: Remove unneeded conditional compilations
ACPI: bus: implement acpi_device_hid when !ACPI
ACPI: bus: implement for_each_acpi_consumer_dev when !ACPI
ACPI: header: implement acpi_device_handle when !ACPI
ACPI: bus: implement acpi_get_physical_device_location when !ACPI
ACPI: bus: implement for_each_acpi_dev_match when !ACPI
ACPI: bus: change the prototype for acpi_get_physical_device_location
ACPI: fan: cleanup resources in the error path of .probe()
ACPI: battery: Rename extensions to hook in messages
ACPI: OSL: Use usleep_range() in acpi_os_sleep()
ACPI: sysfs: Constify 'struct bin_attribute'
ACPI: BGRT: Constify 'struct bin_attribute'
ACPI: BGRT: Mark bin_attribute as __ro_after_init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of changes here are cpufreq updates which are dominated
by amd-pstate driver changes, like in the previous cycle. Moreover,
changes related to amd-pstate are also the majority of cpupower
utility updates.
Included are some pieces of new hardware support, like the addition of
Clearwater Forest processors support to intel_idle, new cpufreq driver
for Airoha SoCs, and Apple cpufreq driver extensions to support more
SoCs. The intel_pstate driver is also extended to be able to support
new platforms by using ACPI CPPC to compute scaling factors between
HWP performance states and frequency.
The rest is mostly fixes and cleanups in assorted pieces of power
management code.
Specifics:
- Use str_enable_disable()-like helpers in cpufreq (Krzysztof
Kozlowski)
- Extend the Apple cpufreq driver to support more SoCs (Hector
Martin, Nick Chan)
- Add new cpufreq driver for Airoha SoCs (Christian Marangi)
- Fix using cpufreq-dt as module (Andreas Kemnade)
- Minor fixes for Sparc, SCMI, and Qcom cpufreq drivers (Ethan Carter
Edwards, Sibi Sankar, Manivannan Sadhasivam)
- Fix the maximum supported frequency computation in the ACPI cpufreq
driver to avoid relying on unfounded assumptions (Gautham Shenoy)
- Fix an amd-pstate driver regression with preferred core rankings
not being used (Mario Limonciello)
- Fix a precision issue with frequency calculation in the amd-pstate
driver (Naresh Solanki)
- Add ftrace event to the amd-pstate driver for active mode (Mario
Limonciello)
- Set default EPP policy on Ryzen processors in amd-pstate (Mario
Limonciello)
- Clean up the amd-pstate cpufreq driver and optimize it to increase
code reuse (Mario Limonciello, Dhananjay Ugwekar)
- Use CPPC to get scaling factors between HWP performance levels and
frequency in the intel_pstate driver and make it stop using a
built-in scaling factor for Arrow Lake processors (Rafael Wysocki)
- Make intel_pstate initialize epp_policy to CPUFREQ_POLICY_UNKNOWN
for consistency with CPU offline (Christian Loehle)
- Fix superfluous updates caused by need_freq_update in the schedutil
cpufreq governor (Sultan Alsawaf)
- Allow configuring the system suspend-resume (DPM) watchdog to warn
earlier than panic (Douglas Anderson)
- Implement devm_device_init_wakeup() helper and introduce a device-
managed variant of dev_pm_set_wake_irq() (Joe Hattori, Peng Fan)
- Remove direct inclusions of 'pm_wakeup.h' which should be only
included via 'device.h' (Wolfram Sang)
- Clean up two comments in the core system-wide PM code (Rafael
Wysocki, Randy Dunlap)
- Add Clearwater Forest processor support to the intel_idle cpuidle
driver (Artem Bityutskiy)
- Clean up the Exynos devfreq driver and devfreq core (Markus
Elfring, Jeongjun Park)
- Minor cleanups and fixes for OPP (Dan Carpenter, Neil Armstrong,
Joe Hattori)
- Implement dev_pm_opp_get_bw() (Neil Armstrong)
- Expose OPP reference counting helpers for Rust (Viresh Kumar)
- Fix TSC MHz calculation in cpupower (He Rongguang)
- Add install and uninstall options to bindings Makefile and add
header changes for cpufreq.h to SWIG bindings in cpupower (John B.
Wyatt IV)
- Add missing residency header changes in cpuidle.h to SWIG bindings
in cpupower (John B. Wyatt IV)
- Add output files to .gitignore and clean them up in "make clean" in
selftests/cpufreq (Li Zhijian)
- Fix cross-compilation in cpupower Makefile (Peng Fan)
- Revise the is_valid flag handling for idle_monitor in the cpupower
utility (wangfushuai)
- Extend and clean up AMD processors support in cpupower (Mario
Limonciello)"
* tag 'pm-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
PM / OPP: Add reference counting helpers for Rust implementation
PM: sleep: wakeirq: Introduce device-managed variant of dev_pm_set_wake_irq()
cpufreq: Use str_enable_disable()-like helpers
cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic
PM: sleep: convert comment from kernel-doc to plain comment
cpufreq: ACPI: Fix max-frequency computation
pm: cpupower: Add missing residency header changes in cpuidle.h to SWIG
PM / devfreq: exynos: remove unused function parameter
OPP: OF: Fix an OF node leak in _opp_add_static_v2()
cpufreq/amd-pstate: Refactor max frequency calculation
cpufreq/amd-pstate: Fix prefcore rankings
pm: cpupower: Add header changes for cpufreq.h to SWIG bindings
cpufreq: sparc: change kzalloc to kcalloc
cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
cpufreq: apple-soc: Increase cluster switch timeout to 400us
cpufreq: apple-soc: Use 32-bit read for status register
...
|
|
Pull ipmi updates from Corey Minyard:
- I'm switching to a new email address, so update that
- Minor fixes for formats and return values and missing ifdefs
- A fix for some error handling that causes a loss of messages
* tag 'for-linus-6.14-1' of https://github.com/cminyard/linux-ipmi:
MAINTAINERS: ipmi: update my email address
ipmi: ssif_bmc: Fix new request loss when bmc ready for a response
ipmi: make ipmi_destroy_user() return void
char:ipmi: Fix a not-used variable on a non-ACPI system
char:ipmi: Fix the wrong format specifier
ipmi: ipmb: Add check devm_kasprintf() returned value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.
No changes to the core framework besides an OF node refcount bump that
never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- list-based mechanisms for handling auto-detected and userspace
created clients are replaced with a flag-based approach. The
resulting code is much simpler as well as the locking.
- i2c clients now get a default debugfs dir managed by the I2C core.
Drivers don't have to maintain their own directory anymore.
Driver updates:
- xiic: atomic_transfer support
- imx-lpi2c: DMA and target mode support
- riic cleanups
- npcm: better timeout handling and more precise frequency setups
- davinci: remove unused platform_data
- at24: add new compatibles for variants from Giantec and Puya
Semiconductor (together with a new vendor prefix)"
* tag 'i2c-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: add kdoc for the new debugfs entry of clients
i2c: designware: Actually make use of the I2C_DW_COMMON and I2C_DW symbol namespaces
i2c: add core-managed per-client directory in debugfs
i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz
i2c: riic: Add `riic_bus_barrier()` to check bus availability
i2c: riic: Use predefined macro and simplify clock tick calculation
i2c: riic: Mark riic_irqs array as const
i2c: riic: Make use of devres helper to request deasserted reset line
i2c: riic: Use GENMASK() macro for bitmask definitions
i2c: riic: Use BIT macro consistently
i2c: riic: Use local `dev` pointer in `dev_err_probe()`
i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
i2c: riic: Introduce a separate variable for IRQ
i2c: amd756: Remove superfluous TODO
Revert "i2c: amd756: Fix endianness handling for word data"
i2c: i801: Add lis3lv02d for Dell Precision M6800
i2c: i801: Remove unnecessary PCI function call
i2c: core: Allocate temp client on the stack in i2c_detect
i2c: slave-eeprom: Constify 'struct bin_attribute'
i2c: imx-lpi2c: make controller available until the system enters suspend_noirq() and from resume_noirq().
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This time there are very little changes for pwm. There is nothing new,
just a few maintenance cleanups.
The contributors this time around were Krzysztof Kozlowski, Mingwei
Zheng, Philipp Stanner, and Stanislav Jakubek. Thanks!"
* tag 'pwm/for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Add check for clk_enable()
dt-bindings: pwm: Correct indentation and style in DTS example
pwm: stm32-lp: Add check for clk_enable()
dt-bindings: pwm: marvell,berlin-pwm: Convert from txt to yaml
dt-bindings: pwm: sprd,ums512-pwm: convert to YAML
pwm: Replace deprecated PCI functions
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Share a helper to convert from crypto_profile to mmc_host
- Respect quirk_max_rate for non-UHS SDIO card too
MMC host:
- Add DT bindings for the mmc-slot
- Clarify DT bindings for the mmc-controller
- bcm2835: Add support for system-wide suspend/resume PM
- dw_mmc-exynos: Add support for the exynos8895 variant
- meson-mx-sdio: Convert DT bindings to dtschema
- mtk-sd: Fixup use of two register ranges
- mtk-sd: Add support for ignoring cmd response CRC
- sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G
- sdhci-msm: Correctly set the load for the regulator
- sdhci-msm: Convert to use custom crypto profile
- sdhci-of-at91: Add support for the microchip sama7d65 variant"
* tag 'mmc-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
mmc: sdhci-msm: Correctly set the load for the regulator
mmc: hi3798mv200: Use syscon_regmap_lookup_by_phandle_args
mmc: Use of_property_present() for non-boolean properties
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8895
mmc: sdhci-msm: convert to use custom crypto profile
mmc: crypto: add mmc_from_crypto_profile()
mmc: mtk-sd: Limit getting top_base to SoCs that require it
dt-bindings: mmc: mtk-sd: Document compatibles that need two register ranges
mmc: sdhci-acpi: Use devm_platform_ioremap_resource()
mmc: sdhci-acpi: Remove not so useful error message
dt-bindings: mmc: convert amlogic,meson-mx-sdio.txt to dtschema
dt-bindings: mmc: document mmc-slot
dt-bindings: mmc: controller: remove '|' when not needed
dt-bindings: mmc: controller: move properties common with slot out to mmc-controller-common
dt-bindings: mmc: controller: clarify the address-cells description
mmc: bcm2835: add suspend/resume pm support
dt-bindings: Drop Bhupesh Sharma from maintainers
mmc: core: don't include 'pm_wakeup.h' directly
mmc: mtk-sd: Add support for ignoring cmd response CRC
mmc: core: Introduce the MMC_RSP_R1B_NO_CRC response
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- PMBus client driver for Intel CRPS185 power supply
- PMBus client driver for Texas Instruments TPS25990
Chip support added to existing drivers:
- pmbus/max15301: Add support for MAX15303
- pmbus/adm1275: Add adm1273 support
- lm75: Add NXP P3T1755 support; with it, add I3C support to the
driver
- asus-ec-sensors: Add TUF GAMING X670E PLUS
Other notable changes:
- nct6683: Add customer IDs for several MSI and ASRock boards
- tmp108: Add regulator support
- Improve write protect support in PMBus core
- pmbus/dps920ab: Add ability to instantiate through i2c
- The hwmon core now accepts NULL as device name parameter to
[devm_]hwmon_device_register_with_info ans uses the parent device
name as fallback in that case
- The PMBus core now provides the PMBUs revision in a debugfs file
- asus-ec-sensors: Support for optional CPU fan on AMD 600
motherboards
- raspberrypi: Add PM suspend/resume support
- dell-smm: Enable manual fan control support on Dell XPS 9370
- pwm-fan: Default to maximum cooling level if provided
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (44 commits)
hwmon: pmbus: dps920ab: Add ability to instantiate through i2c
hwmon: (pwm-fan) Default to the Maximum cooling level if provided
hwmon: (asus_atk0110) Use str_enabled_disabled() and str_enable_disable() helpers
hwmon: Fix help text for aspeed-g6-pwm-tach
hwmon: (dell-smm) Add Dell XPS 9370 to fan control whitelist
hwmon: (acpi_power_meter) Fix update the power trip points on failure
hwmon: (acpi_power_meter) Fix uninitialized variables
hwmon: (core) Use device name as a fallback in devm_hwmon_device_register_with_info
hwmon: (pmbus/max15301) Add support for MAX15303
hwmon: (pmbus/adm1275) add adm1273 support
dt-bindings: hwmon: adm1275: add adm1273
hwmon: (nct6683) Add another customer ID for MSI
hwmon: (pwm-fan): Make use of device properties everywhere
hwmon: (lm75) add I3C support for P3T1755
hwmon: (lm75) separate probe into common and I2C parts
hwmon: (lm75) Remove superfluous 'client' member from private struct
hwmon: (lm75) simplify regulator handling
hwmon: (lm75) simplify lm75_write_config()
hwmon: (lm75) Hide register size differences in regmap access functions
hwmon: (pmbus/crps) Add Intel CRPS185 power supply
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Allow struct bin_attribute instances to be placed in read-only memory
for enhanced protection
- Fix a memory leak in the cht-wcove driver by using
devm_led_classdev_register()
- Fix an OF node reference leak in the netxbig driver
- Ensure PWM is disabled properly in pwm-multicolor suspend
- Add support for Texas Instruments LP8864, LP8864S, LP8866
LED-backlight drivers
- Add support for STMicroelectronics's LED1202 12-channel LED driver
- Convert LP8860 bindings to YAML format
- Add bindings for the TI LP8864/LP8866 LED drivers
- Add LED1202 LED controller bindings
- Fix path to color definitions in leds-class-multicolor.yaml
- Add pm660l compatible to qcom,spmi-flash-led bindings
- Extend cznic,turris-omnia-leds binding with interrupts property
- Add documentation for the STMicroelectronics LED1202 driver
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS
- Fix a wrong format specifier in the ledtrig-activity driver
- Fix a bug in the lp8860 driver where only half of the EEPROM was
written
* tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: triggers: Constify 'struct bin_attribute'
leds: cht-wcove: Use devm_led_classdev_register() to avoid memory leak
leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights
dt-bindings: leds: Convert LP8860 into YAML format
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
leds: pwm-multicolor: Disable PWM when going to suspend
leds: netxbig: Fix an OF node reference leak in netxbig_leds_get_of_pdata()
turris-omnia-mcu-interface.h: Move macro definitions outside of enums
MAINTAINERS: Add entry for AAEON UP board FPGA drivers
leds: Add AAEON UP board LED driver
leds: trigger: netdev: Check offload ability on interface up
leds: turris-omnia: Use uppercase first letter in all comments
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver
platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
leds: turris-omnia: Document driver private structures
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is a fairly quiet release for the most part, though we do have
one really nice improvement in the spi-mem framework which will
improve performance for flash devices especially when built on by
changes in the MTD subsystem which are also due to be sent this merge
window.
There's also been some substantial work on some of the drivers,
highlights include:
- Support for per-operation bus frequency in the spi-mem framework,
meaning speeds are no longer limited by the slowest operation
- ACPI support and improved power management for Rockchip SFC
controllers
- Support for Atmel SAM7G5 QuadSPI and KEBA SPI controllers"
* tag 'spi-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (49 commits)
spi: pxa2xx: Introduce __lpss_ssp_update_priv() helper
spi: ti-qspi: Use syscon_regmap_lookup_by_phandle_args
spi: amd: Fix -Wuninitialized in amd_spi_exec_mem_op()
spi: spi-mem: Estimate the time taken by operations
spi: spi-mem: Create macros for DTR operation
spi: spi-mem: Reorder spi-mem macro assignments
spi: zynqmp-gqspi: Support per spi-mem operation frequency switches
spi: zynq-qspi: Support per spi-mem operation frequency switches
spi: spi-ti-qspi: Support per spi-mem operation frequency switches
spi: spi-sn-f-ospi: Support per spi-mem operation frequency switches
spi: rockchip-sfc: Support per spi-mem operation frequency switches
spi: nxp-fspi: Support per spi-mem operation frequency switches
spi: mxic: Support per spi-mem operation frequency switches
spi: mt65xx: Support per spi-mem operation frequency switches
spi: microchip-core-qspi: Support per spi-mem operation frequency switches
spi: fsl-qspi: Support per spi-mem operation frequency switches
spi: dw: Support per spi-mem operation frequency switches
spi: cadence-qspi: Support per spi-mem operation frequency switches
spi: amlogic-spifc-a1: Support per spi-mem operation frequency switches
spi: amd: Drop redundant check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This was a very quiet release, aside from some smaller improvements we
have:
- Support for power budgeting on regulators, initially targeted at
some still in review support for PSE controllers but generally
useful
- Support for error interrupts from ROHM BD96801 devices
- Support for NXP PCA9452"
* tag 'regulator-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: Add regulator-power-budget-milliwatt property
regulator: Add support for power budget
regulator: core: Resolve supply using of_node from regulator_config
regulator: of: Implement the unwind path of of_regulator_match()
regulator: tps65219: Remove debugging helper function
regulator: tps65219: Remove MODULE_ALIAS
regulator: tps65219: Update driver name
regulator: tps65219: Use dev_err_probe() instead of dev_err()
regulator: dt-bindings: mt6315: Drop regulator-compatible property
regulator: pca9450: Add PMIC pca9452 support
regulator: dt-bindings: pca9450: Add pca9452 support
regulator: pca9450: Use dev_err_probe() to simplify code
regulator: pca9450: add enable_value for all bucks
regulator: bd96801: Add ERRB IRQ
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There's one big bit of work this time around, the addition of support
for a greater range of MBQ access sizes to SoundWire devices together
with support for deferred read/write.
The MBQ register maps generally have variable register sizes, the
variable regiseter size support allows them to be handled much more
naturally within regmap with less open coding in drivers.
The deferred read/write support avoids spurious errors when devices
make use of a bus feature allowing them to indicate they're busy.
These changes pull in a supporting SoundWire change, and there's an
ASoC change building off the new code.
The remainder of the changes are code cleanups"
* tag 'regmap-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Add support for SDCA deferred controls
regmap: sdw-mbq: Add support for further MBQ register sizes
ASoC: SDCA: Update list of entity_0 controls
soundwire: SDCA: Add additional SDCA address macros
regmap: regmap_multi_reg_read(): make register list const
regmap: cache: rbtree: use krealloc_array() to replace krealloc()
regmap: cache: mapple: use kmalloc_array() to replace kmalloc()
regmap: place foo / 8 and foo % 8 closer to each other
regmap: Use BITS_TO_BYTES()
regmap: cache: Use BITS_TO_BYTES()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"We added support for another Qualcomm WCN model and a FIXME comment
that explains why we still need to keep a GPIO workaround for now
despite having merged a set of changes to the PCI code that seemingly
fixed the underlying problem:
- support a new model in the qcom-wcn pwrseq driver
- explain the need to keep the WLAN_EN GPIO workaround for now with a
FIXME comment"
* tag 'pwrseq-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: explain why we need the WLAN_EN GPIO hack
power: sequencing: qcom-wcn: add support for the WCN6750 PMU
|
