summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-26usb: usb251xb: fix to avoid potential NULL pointer dereferenceAditya Pakki
of_match_device in usb251xb_probe can fail and returns a NULL pointer. The patch avoids a potential NULL pointer dereference in this scenario. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode failsChen-Yu Tsai
Some PHYs do not support PHY_MODE_USB_HOST_SS, i.e. USB 3.0 or higher. Fall back and try the more generic PHY_MODE_USB_HOST if it fails. Fixes: b97a31348379 ("usb: core: comply to PHY framework") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYsChen-Yu Tsai
While only the first PHY supports mode switching, the remaining PHYs work in USB host mode. They should support set_mode with mode=USB_HOST instead of failing. This is especially needed now that the USB core does set_mode for all USB ports, which was added in commit b97a31348379 ("usb: core: comply to PHY framework"). Make set_mode with mode=USB_HOST a no-op instead of failing for the non-OTG USB PHYs. Fixes: 6ba43c291961 ("phy-sun4i-usb: Add support for phy_set_mode") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: introduce usb_ep_type_string() functionChunfeng Yun
In some places, the code prints a human-readable USB endpoint transfer type (e.g. "bulk"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To make this scenario easier, here introduces usb_ep_type_string() function, which returns a human-readable name of provided endpoint type. It also changes a few places switch was used to use this new function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: typec: fusb302: Make fusb302_irq_work staticYueHaibing
Fix sparse warning: drivers/usb/typec/tcpm/fusb302.c:1454:6: warning: symbol 'fusb302_irq_work' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: u132-hcd: fix potential NULL pointer dereferenceKangjie Lu
In case create_singlethread_workqueue fails, the fix notifies callers the error to avoid potential NULL pointer dereferences. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: typec: wcove: Provide fwnode for the portHeikki Krogerus
By registering a software fwnode for the port, we can supply the connector capabilities to the tcpm using the common USB connector device properties instead of relying on platform data (struct tcpc_config). Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: core: Add PM runtime calls to usb_hcd_platform_shutdownTony Lindgren
If ohci-platform is runtime suspended, we can currently get an "imprecise external abort" on reboot with ohci-platform loaded when PM runtime is implemented for the SoC. Let's fix this by adding PM runtime support to usb_hcd_platform_shutdown. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: sierra: fix a missing check of device_create_fileKangjie Lu
device_create_file() could fail and return an error code. The fix captures the error and returns the error code upstream in case it indeed failed. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add a function to switch mailbox state to stringChunfeng Yun
By introducing mailbox_state_string(), allow to make debug log more readable Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add tracepoints to help debugChunfeng Yun
This patch implements a few initial tracepoints for the mtu3 driver. More traces can be added as necessary in order to ease the task of debugging. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: move vbus and mode debugfs interfaces into mtu3_debugfs.cChunfeng Yun
Due to the separated debugfs files are added, move vbus and mode debugfs interfaces related with dual-role switch from mtu3_dr.c into mtu3_debugfs.c Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add debugfs interface filesChunfeng Yun
This adds more debugfs consumers. The debugfs entries read some important registers, fifo status, QMU ring, endpoint status, and IPPC probe interface to get internal status. With these entries, users can check the registers, endpoint and GPD used during run time. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: supports new QMU formatChunfeng Yun
In order to support U3gen2 ISOC transfer upto 96DPs, extend the data buffer length. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: rebuild qmu_gpd struct to prepare to support new QMU formatChunfeng Yun
To support USB3 Gen2 ISOC, the data buffer length need be extended, it's hard to make the current qmu_gpd struct compatible, so here rebuild qmu_gpd struct and make easy to support new QMU format Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: fix transfer error of USB3 Gen2 isocChunfeng Yun
To support USB3 Gen2 ISOC, the registers of TXCSR1 and RXCSR1 are adjusted to support greater maxpkt and mult value, this patch fix this issue Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: rebuild the code of getting vbus regulatorChunfeng Yun
Remove local variable @vbus and use @dev instead of @pdev->dev Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: remove unnecessary local variable @reqChunfeng Yun
The local variable @req is unnecessary in qmu_tx_zlp_error_handler, so remove it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: print useful information also for device and host modesChunfeng Yun
Print useful information not only dual-role mode but also device mode and host mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: check return value of devm_extcon_register_notifier()Chunfeng Yun
Check the return value of devm_extcon_register_notifier() and add error handling. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26MAINTAINERS: Fix uniphier-mdmac.c file pathVinod Koul
Commit 32e74aabebc8 ("dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver") wrongly put filepath for uniphier-mdmac.c, fix it Fixes: 32e74aabebc8 ("dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver") Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-03-25scsi: qla4xxx: fix a potential NULL pointer dereferenceKangjie Lu
In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-25scsi: aacraid: Insure we don't access PCIe space during AER/EEHDave Carroll
There are a few windows during AER/EEH when we can access PCIe I/O mapped registers. This will harden the access to insure we do not allow PCIe access during errors Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-25scsi: mpt3sas: Fix kernel panic during expander resetSreekanth Reddy
During expander reset handling, the driver invokes kernel function scsi_host_find_tag() to obtain outstanding requests associated with the scsi host managed by the driver. Driver loops from tag value zero to hba queue depth to obtain the outstanding scmds. But when blk-mq is enabled, the block layer may return stale entry for one or more requests. This may lead to kernel panic if the returned value is inaccessible or the memory pointed by the returned value is reused. Reference of upstream discussion: https://patchwork.kernel.org/patch/10734933/ Instead of calling scsi_host_find_tag() API for each and every smid (smid is tag +1) from one to shost->can_queue, now driver will call this API (to obtain the outstanding scmd) only for those smid's which are outstanding at the driver level. Driver will determine whether this smid is outstanding at driver level by looking into it's corresponding MPI request frame, if its MPI request frame is empty, then it means that this smid is free and does not need to call scsi_host_find_tag() for it. By doing this, driver will invoke scsi_host_find_tag() for only those tags which are outstanding at the driver level. Driver will check whether particular MPI request frame is empty or not by looking into the "DevHandle" field. If this field is zero then it means that this MPI request is empty. For active MPI request DevHandle must be non-zero. Also driver will memset the MPI request frame once the corresponding scmd is processed (i.e. just before calling scmd->done function). Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-25net: phy: don't clear BMCR in genphy_soft_resetHeiner Kallweit
So far we effectively clear the BMCR register. Some PHY's can deal with this (e.g. because they reset BMCR to a default as part of a soft-reset) whilst on others this causes issues because e.g. the autoneg bit is cleared. Marvell is an example, see also thread [0]. So let's be a little bit more gentle and leave all bits we're not interested in as-is. This change is needed for PHY drivers to properly deal with the original patch. [0] https://marc.info/?t=155264050700001&r=1&w=2 Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Phil Reid <preid@electromag.com.au> Tested-by: liweihang <liweihang@hisilicon.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25PCI/LINK: Deduplicate bandwidth reports for multi-function devicesLukas Wunner
If a multi-function device's bandwidth is already limited when it is enumerated, a message is logged only for function 0. By contrast, when downtraining occurs after enumeration, a message is logged for all functions. That's because the former uses pcie_report_downtraining(), whereas the latter uses __pcie_print_link_status() (which doesn't filter functions != 0). I am seeing this happen on a MacBookPro9,1 with a GPU (function 0) and an integrated HDA controller (function 1). Avoid this incongruence by calling pcie_report_downtraining() in both cases. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>
2019-03-25PCI/LINK: Clear bandwidth notification interrupt before enabling itLukas Wunner
When booting a MacBookPro9,1, duplicate link downtraining messages are logged for the devices directly attached to the two CPU-internal Root Ports of the Core i7 3615QM: Once on device enumeration and once on enablement of the bandwidth notification interrupt on the Root Ports. Duplicate messages do not occur with Root Ports on the PCH and Downstream Ports on the Thunderbolt controller: Only a single message is logged for these, namely on device enumeration. The reason for the duplicate messages is a stale interrupt in the Link Status register of the 3615QM's internal Root Ports. Avoid by clearing the interrupt before enabling it. An alternative approach would be to clear the interrupt already on device enumeration or to report link downtraining only if the speed has changed. That way, link downtraining occurring between device enumeration and enablement of the bandwidth notification interrupt could be caught. However clearing stale interrupts before enabling them is a standard operating procedure for any driver and keeping the two steps in one place makes the code easier to follow. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>
2019-03-25PCI/LINK: Supply IRQ handler so level-triggered IRQs are ackedAlexandru Gagniuc
A threaded IRQ with a NULL handler does not work with level-triggered interrupts. request_threaded_irq() will return an error: genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 16 pcie_bw_notification: probe of 0000:00:1b.0:pcie010 failed with error -22 For level interrupts we need to silence the interrupt before exiting the IRQ handler, so just clear the PCI_EXP_LNKSTA_LBMS bit there. Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-03-25cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequencySrinivas Pandruvada
The ACPI specification states that if the "Guaranteed Performance Register" is not implemented, the OSPM assumes guaranteed performance to always be equal to nominal performance. So for invalid or unimplemented guaranteed performance register, use nominal performance as guaranteed performance. This change will fall back to nominal_perf when guranteed_perf is invalid. If nominal_perf is also invalid or not present, fall back to the existing implementation, which is to read from HWP Capabilities MSR. Fixes: 86d333a8cc7f ("cpufreq: intel_pstate: Add base_frequency attribute") Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-25ACPI / CPPC: Fix guaranteed performance handlingSrinivas Pandruvada
As per the ACPI specification, "Guaranteed Performance Register" is a "Buffer" field and it cannot be "Integer", so treat the "Integer" type for "Guaranteed Performance Register" field as invalid and ignore its value in that case. Also save one cpc_read() call when "Guaranteed Performance Register" is not present, which means a register defined as: "Register(SystemMemory, 0, 0, 0, 0)". Fixes: 29523f095397 ("ACPI / CPPC: Add support for guaranteed performance") Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-25Revert "parport: daisy: use new parport device model"Linus Torvalds
This reverts commit 1aec4211204d9463d1fd209eb50453de16254599. Steven Rostedt reports that it causes a hang at bootup and bisected it to this commit. The troigger is apparently a module alias for "parport_lowlevel" that points to "parport_pc", which causes a hang with modprobe -q -- parport_lowlevel blocking forever with a backtrace like this: wait_for_completion_killable+0x1c/0x28 call_usermodehelper_exec+0xa7/0x108 __request_module+0x351/0x3d8 get_lowlevel_driver+0x28/0x41 [parport] __parport_register_driver+0x39/0x1f4 [parport] daisy_drv_init+0x31/0x4f [parport] parport_bus_init+0x5d/0x7b [parport] parport_default_proc_register+0x26/0x1000 [parport] do_one_initcall+0xc2/0x1e0 do_init_module+0x50/0x1d4 load_module+0x1c2e/0x21b3 sys_init_module+0xef/0x117 Supid says: "Due to the new device model daisy driver will now try to find the parallel ports while trying to register its driver so that it can bind with them. Now, since daisy driver is loaded while parport bus is initialising the list of parport is still empty and it tries to load the lowlevel driver, which has an alias set to parport_pc, now causes a deadlock" But I don't think the daisy driver should be loaded by the parport initialization in the first place, so let's revert the whole change. If the daisy driver can just initialize separately on its own (like a driver should), instead of hooking into the parport init sequence directly, this issue probably would go away. Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reported-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-25libceph: fix breakage caused by multipage bvecsIlya Dryomov
A bvec can now consist of multiple physically contiguous pages. This means that bvec_iter_advance() can move to a different page while staying in the same bvec (i.e. ->bi_bvec_done != 0). The messenger works in terms of segments which can now be defined as the smaller of a bvec and a page. The "more bytes to process in this segment" condition holds only if bvec_iter_advance() leaves us in the same bvec _and_ in the same page. On next bvec (possibly in the same page) and on next page (possibly in the same bvec) we may need to set ->last_piece. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26staging: octeon-ethernet: fix incorrect PHY modeAaro Koskinen
When connecting PHY, we set the mode to PHY_INTERFACE_MODE_GMII which is not always correct. Specifically on boards where RGMII_RXID is needed networking now longer works with at803x after commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode"). Fix by passing the correct mode. Tested on EdgeRouter Lite (RGMII_RXID, at803x PHY) and D-Link DSR-500N (RGMII, broadcom PHY). Fixes: 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26staging: vc04_services: Fix an error code in vchiq_probe()Dan Carpenter
We need to set "err" on this error path. Fixes: 187ac53e590c ("staging: vchiq_arm: rework probe and init functions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26staging: erofs: fix error handling when failed to read compresssed dataGao Xiang
Complete read error handling paths for all three kinds of compressed pages: 1) For cache-managed pages, PG_uptodate will be checked since read_endio will unlock and SetPageUptodate for these pages; 2) For inplaced pages, read_endio cannot SetPageUptodate directly since it should be used to mark the final decompressed data, PG_error will be set with page locked for IO error instead; 3) For staging pages, PG_error is used, which is similar to what we do for inplaced pages. Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26staging: vt6655: Fix interrupt race condition on device start up.Malcolm Priestley
It appears on some slower systems that the driver can find its way out of the workqueue while the interrupt is disabled by continuous polling by it. Move MACvIntEnable to vnt_interrupt_work so that it is always enabled on all routes out of vnt_interrupt_process. Move MACvIntDisable so that the device doesn't keep polling the system while the workqueue is being processed. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> CC: stable@vger.kernel.org # v4.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26Merge tag 'drm-misc-fixes-2019-03-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - A bunch of fixes to cleanup path in meson - Fix the DMT TDMS clock filtering on meson - Fix an issue with NV12 buffers on rockchip when scaling is active - Fix a couple of use-after-free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325104523.obnfelgvaglyhe5e@flea
2019-03-25io_uring: offload write to async worker in case of -EAGAINRoman Penyaev
In case of direct write -EAGAIN will be returned if page cache was previously populated. To avoid immediate completion of a request with -EAGAIN error write has to be offloaded to the async worker, like io_read() does. Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-25sbitmap: order READ/WRITE freed instance and setting clear bitMing Lei
Inside sbitmap_queue_clear(), once the clear bit is set, it will be visiable to allocation path immediately. Meantime READ/WRITE on old associated instance(such as request in case of blk-mq) may be out-of-order with the setting clear bit, so race with re-allocation may be triggered. Adds one memory barrier for ordering READ/WRITE of the freed associated instance with setting clear bit for avoiding race with re-allocation. The following kernel oops triggerd by block/006 on aarch64 may be fixed: [ 142.330954] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000330 [ 142.338794] Mem abort info: [ 142.341554] ESR = 0x96000005 [ 142.344632] Exception class = DABT (current EL), IL = 32 bits [ 142.350500] SET = 0, FnV = 0 [ 142.353544] EA = 0, S1PTW = 0 [ 142.356678] Data abort info: [ 142.359528] ISV = 0, ISS = 0x00000005 [ 142.363343] CM = 0, WnR = 0 [ 142.366305] user pgtable: 64k pages, 48-bit VAs, pgdp = 000000002a3c51c0 [ 142.372983] [0000000000000330] pgd=0000000000000000, pud=0000000000000000 [ 142.379777] Internal error: Oops: 96000005 [#1] SMP [ 142.384613] Modules linked in: null_blk ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp vfat fat rpcrdma sunrpc rdma_ucm ib_iser rdma_cm iw_cm libiscsi ib_umad scsi_transport_iscsi ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core sbsa_gwdt crct10dif_ce ghash_ce ipmi_ssif sha2_ce ipmi_devintf sha256_arm64 sg sha1_ce ipmi_msghandler ip_tables xfs libcrc32c mlx5_core sdhci_acpi mlxfw ahci_platform at803x sdhci libahci_platform qcom_emac mmc_core hdma hdma_mgmt i2c_dev [last unloaded: null_blk] [ 142.429753] CPU: 7 PID: 1983 Comm: fio Not tainted 5.0.0.cki #2 [ 142.449458] pstate: 00400005 (nzcv daif +PAN -UAO) [ 142.454239] pc : __blk_mq_free_request+0x4c/0xa8 [ 142.458830] lr : blk_mq_free_request+0xec/0x118 [ 142.463344] sp : ffff00003360f6a0 [ 142.466646] x29: ffff00003360f6a0 x28: ffff000010e70000 [ 142.471941] x27: ffff801729a50048 x26: 0000000000010000 [ 142.477232] x25: ffff00003360f954 x24: ffff7bdfff021440 [ 142.482529] x23: 0000000000000000 x22: 00000000ffffffff [ 142.487830] x21: ffff801729810000 x20: 0000000000000000 [ 142.493123] x19: ffff801729a50000 x18: 0000000000000000 [ 142.498413] x17: 0000000000000000 x16: 0000000000000001 [ 142.503709] x15: 00000000000000ff x14: ffff7fe000000000 [ 142.509003] x13: ffff8017dcde09a0 x12: 0000000000000000 [ 142.514308] x11: 0000000000000001 x10: 0000000000000008 [ 142.519597] x9 : ffff8017dcde09a0 x8 : 0000000000002000 [ 142.524889] x7 : ffff8017dcde0a00 x6 : 000000015388f9be [ 142.530187] x5 : 0000000000000001 x4 : 0000000000000000 [ 142.535478] x3 : 0000000000000000 x2 : 0000000000000000 [ 142.540777] x1 : 0000000000000001 x0 : ffff00001041b194 [ 142.546071] Process fio (pid: 1983, stack limit = 0x000000006460a0ea) [ 142.552500] Call trace: [ 142.554926] __blk_mq_free_request+0x4c/0xa8 [ 142.559181] blk_mq_free_request+0xec/0x118 [ 142.563352] blk_mq_end_request+0xfc/0x120 [ 142.567444] end_cmd+0x3c/0xa8 [null_blk] [ 142.571434] null_complete_rq+0x20/0x30 [null_blk] [ 142.576194] blk_mq_complete_request+0x108/0x148 [ 142.580797] null_handle_cmd+0x1d4/0x718 [null_blk] [ 142.585662] null_queue_rq+0x60/0xa8 [null_blk] [ 142.590171] blk_mq_try_issue_directly+0x148/0x280 [ 142.594949] blk_mq_try_issue_list_directly+0x9c/0x108 [ 142.600064] blk_mq_sched_insert_requests+0xb0/0xd0 [ 142.604926] blk_mq_flush_plug_list+0x16c/0x2a0 [ 142.609441] blk_flush_plug_list+0xec/0x118 [ 142.613608] blk_finish_plug+0x3c/0x4c [ 142.617348] blkdev_direct_IO+0x3b4/0x428 [ 142.621336] generic_file_read_iter+0x84/0x180 [ 142.625761] blkdev_read_iter+0x50/0x78 [ 142.629579] aio_read.isra.6+0xf8/0x190 [ 142.633409] __io_submit_one.isra.8+0x148/0x738 [ 142.637912] io_submit_one.isra.9+0x88/0xb8 [ 142.642078] __arm64_sys_io_submit+0xe0/0x238 [ 142.646428] el0_svc_handler+0xa0/0x128 [ 142.650238] el0_svc+0x8/0xc [ 142.653104] Code: b9402a63 f9000a7f 3100047f 540000a0 (f9419a81) [ 142.659202] ---[ end trace 467586bc175eb09d ]--- Fixes: ea86ea2cdced20057da ("sbitmap: ammortize cost of clearing bits") Reported-and-bisected_and_tested-by: Yi Zhang <yi.zhang@redhat.com> Cc: Yi Zhang <yi.zhang@redhat.com> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-25blk-mq: fix sbitmap ws_active for shared tagsJens Axboe
We now wrap sbitmap waitqueues in an active counter, so we can avoid iterating wakeups unless we have waiters there. This works as long as everyone that's manipulating the waitqueues use the proper helpers. For the tag wait case for shared tags, however, we add ourselves to the waitqueue without incrementing/decrementing the ->ws_active count. This means that wakeups can take a long time to happen. Fix this by manually doing the inc/dec as needed for the wait queue handling. Reported-by: Michael Leun <kbug@newton.leun.net> Tested-by: Michael Leun <kbug@newton.leun.net> Cc: stable@vger.kernel.org Reviewed-by: Omar Sandoval <osandov@fb.com> Fixes: 5d2ee7122c73 ("sbitmap: optimize wakeup check") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-25dmaengine: stm32-mdma: Revert "dmaengine: stm32-mdma: Add a check on ↵Pierre-Yves MORDRET
read_u32_array" This reverts commit 906b40b246b0 ("dmaengine: stm32-mdma: Add a check on read_u32_array") As stated by bindings "st,ahb-addr-masks" is optional. The statement inserted by this commit makes this property mandatory and prevents MDMA to be probed in case property not present. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-03-25arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186Jonathan Hunter
Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression that is causing accesses to the file-system on the eMMC to fail. Errors such as the following have been observed ... mmc2: running CQE recovery mmc2: mmc_select_hs400 failed, error -110 print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700 mmc2: cqhci: CQE failed to exit halt state For now disable CQE support for Tegra186 until this issue is resolved. Fixes: dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4 Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-25Merge tag 'imx-fixes-5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.1: - Correct phy mode setting of imx6dl-yapp4 board to fix a problem caused by commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay for RGMII mode"). - Add a missing of_node_put call to fix leaked reference detected by coccinelle in imx51 machine code. - Fix imx6q cpuidle driver bug which causes that CPU might not wake up at expected time. - Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix transmission timeouts error seen on imx6qdl-phytec-pfla02 board. - Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h. - Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi. - Correct pseudo PHY address of switch device for imx6dl-yapp4 board. - Update PWM driver options in imx defconfig files due to the change on driver part. * tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v4_v5_defconfig: enable PWM driver ARM: imx_v6_v7_defconfig: continue compiling the pwm driver ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi ARM: dts: imx6ull: Use the correct style for SPDX License Identifier ARM: dts: pfla02: increase phy reset duration ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time ARM: imx51: fix a leaked reference by adding missing of_node_put ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
2019-03-25io_uring: fix big-endian compat signal mask handlingArnd Bergmann
On big-endian architectures, the signal masks are differnet between 32-bit and 64-bit tasks, so we have to use a different function for reading them from user space. io_cqring_wait() initially got this wrong, and always interprets this as a native structure. This is ok on x86 and most arm64, but not on s390, ppc64be, mips64be, sparc64 and parisc. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-25Merge tag 'arm-soc/for-5.1/soc-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1, please pull the following: - Eric provides fixes for the bcm2835-pm driver: added missing depends on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error paths on initialization and fixing the PM_IMAGE_PERI power domain * tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux: arm64: bcm2835: Add missing dependency on MFD_CORE. soc: bcm: bcm2835-pm: Fix error paths of initialization. soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
2019-03-25Merge tag 'arm-soc/for-5.1/devicetree-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.1, please pull the following: - Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi model B revision 2 * tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix hdmi hpd gpio pull
2019-03-25ARM: dts: nomadik: Fix polarity of SPI CSLinus Walleij
The SPI DT bindings are for historical reasons a pitfall, the ability to flag a GPIO line as active high/low with the second cell flags was introduced later so the SPI subsystem will only accept the bool flag spi-cs-high to indicate that the line is active high. It worked by mistake, but the mistake was corrected in another commit. The comment in the DTS file was also misleading: this CS is indeed active high. Fixes: cffbb02dafa3 ("ARM: dts: nomadik: Augment NHK15 panel setting") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-25Merge tag 'renesas-fixes-for-v5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes Renesas ARM Based SoC Fixes for v5.1 R-Car Gen3 E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs: * Correct SCIF5 DMA channels * tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
2019-03-25ARM: davinci: fix build failure with allnoconfigSekhar Nori
allnoconfig build with just ARCH_DAVINCI enabled fails because drivers/clk/davinci/* depends on REGMAP being enabled. Fix it by selecting REGMAP_MMIO when building in DaVinci support. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-25ALSA: pcm: Don't suspend stream in unrecoverable PCM stateTakashi Iwai
Currently PCM core sets each opened stream forcibly to SUSPENDED state via snd_pcm_suspend_all() call, and the user-space is responsible for re-triggering the resume manually either via snd_pcm_resume() or prepare call. The scheme works fine usually, but there are corner cases where the stream can't be resumed by that call: the streams still in OPEN state before finishing hw_params. When they are suspended, user-space cannot perform resume or prepare because they haven't been set up yet. The only possible recovery is to re-open the device, which isn't nice at all. Similarly, when a stream is in DISCONNECTED state, it makes no sense to change it to SUSPENDED state. Ditto for in SETUP state; which you can re-prepare directly. So, this patch addresses these issues by filtering the PCM streams to be suspended by checking the PCM state. When a stream is in either OPEN, SETUP or DISCONNECTED as well as already SUSPENDED, the suspend action is skipped. To be noted, this problem was originally reported for the PCM runtime PM on HD-audio. And, the runtime PM problem itself was already addressed (although not intended) by the code refactoring commits 3d21ef0b49f8 ("ALSA: pcm: Suspend streams globally via device type PM ops") and 17bc4815de58 ("ALSA: pci: Remove superfluous snd_pcm_suspend*() calls"). These commits eliminated the snd_pcm_suspend*() calls from the runtime PM suspend callback code path, hence the racy OPEN state won't appear while runtime PM. (FWIW, the race window is between snd_pcm_open_substream() and the first power up in azx_pcm_open().) Although the runtime PM issue was already "fixed", the same problem is still present for the system PM, hence this patch is still needed. And for stable trees, this patch alone should suffice for fixing the runtime PM problem, too. Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-12 14:40:01 +0000