summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-30ehci: remove debugging statement with ehci statistics in ehci_stop()Xenia Ragiadakou
This patch removes the ehci statictics information output in ehci_stop() because they do not provide interesting info. At any case, the current statistics can be viewed by reading the 'registers' file in debugfs. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: remove duplicate debug_async_open() prototype in ehci-dbg.cXenia Ragiadakou
This patch removes the duplicate of debug_async_open() prototype following three lines below the debug_async_open() declaration. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is setXenia Ragiadakou
The debugging code for ehci is enabled to run if the DEBUG flag is defined. This patch enables the debugging code also when the kernel is configured with dynamic debugging on. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: remove ehci_vdbg() verbose debugging statementsXenia Ragiadakou
This patch removes ehci_vdbg debugging statements from EHCI host controller driver because they produce too much information, lowering the signal to noise ratio when debugging, and because they are not used anymore. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Staging:BCM:DDRInit.c:Renaming __FUNCTION__Paul McQuade
__Function__ gets renamed with __func__ Signed-Off-By: Paul McQuade <paulmcquad@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: bcm: remove Version.h file.navin patidar
many of the macros defined in Version.h are not being used, so we can remove the file. Signed-off-by: navin patidar <navinp@cdac.in> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: rtl8188eu: off by one in rtw_set_802_11_add_wep()Dan Carpenter
"keyid" is used as an offset into the ->dot11DefKey[] array. The array has 4 elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: r8188eu: copying one byte too muchDan Carpenter
There is a copy and paste bug here so we copy 4 bytes instead of 3. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: rtl8188eu: || vs && typoDan Carpenter
Obviously it's impossible for ->KeyLength to be both 5 and 13. I assume that && was intended here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: r8188eu: off by one bugsDan Carpenter
These should be "<" instead of "<=". Also we can use the ARRAY_SIZE() macro. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: crystalhd: Resolve sparse 'different base types' warnings.Shaun Laing
The result from crystalhd_get_sgle_paddr and crystalhd_get_sgle_len are later used in calculations, so the result should be in CPU byte ordering. Signed-off-by: Shaun Laing <shaun@xresource.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: r8188eu: Fix compiler warnings in os_dep/ioctl_linux.cLarry Finger
The 0-DAY kernel build testing backend reports the following compiler warnings not shown on my compiler version/options: drivers/staging/rtl8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_efuse_get': >> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5836:65: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations] sprintf(extra, "%s%02X ", extra, pEfuseHal->fakeEfuseInitMap[i+j]); ^ drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5830:3: note: containing loop for (i = 0; i < EFUSE_MAP_SIZE; i += 16) { ^ >> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6042:69: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations] sprintf(extra, "%s %02X", extra, pEfuseHal->fakeEfuseModifiedMap[i+j]); ^ drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6036:3: note: containing loop for (i = 0; i < EFUSE_MAP_SIZE; i += 16) { ^ The problem is due to improper settings for some of the EFUSE_XXX defines such that EFUSE_MAP_SIZE was larger than the sizes of the marked arrays. Thanks to Fengguang Wu for helping me understand the root cause. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30perf trace: Handle missing HUGEPAGE definesDavid Ahern
Needed for compile on Fedora 12 which goes back to the 2.6.32 kernel. Might be needed for RHEL6. I use F12 to compile static binaries for Wind River Linux 4.3. Signed-off-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/n/tip-nd0d7rbajgm8k6tah3xv34v1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-30staging: dgap: Add missing #include <linux/slab.h>Geert Uytterhoeven
drivers/staging/dgap/dgap_driver.c: In function ‘dgap_cleanup_module’: drivers/staging/dgap/dgap_driver.c:423: error: implicit declaration of function ‘kfree’ drivers/staging/dgap/dgap_driver.c: In function ‘dgap_driver_kzmalloc’: drivers/staging/dgap/dgap_driver.c:940: error: implicit declaration of function ‘kmalloc’ drivers/staging/dgap/dgap_driver.c:940: warning: initialization makes pointer from integer without a cast Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: dgnc: adds TODOLidza Louina
This patchs adds a TODO for the driver. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Documentation sysfs-bus-usb: Document which files are used by libusbHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Documentation sysfs-bus-usb: Document the speed file used by libusbHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Documentation sysfs-bus-usb: Move files with known users to stableHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30USB: fix build error when CONFIG_PM_SLEEP isn't enabledAlan Stern
This patch fixes a build error that occurs when CONFIG_PM is enabled and CONFIG_PM_SLEEP isn't: >> drivers/usb/host/ohci-pci.c:294:10: error: 'usb_hcd_pci_pm_ops' undeclared here (not in a function) .pm = &usb_hcd_pci_pm_ops Since the usb_hcd_pci_pm_ops structure is defined and used when CONFIG_PM is enabled, its declaration should not be protected by CONFIG_PM_SLEEP. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: kbuild test robot <fengguang.wu@intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usb: r8a66597-hcd: use platform_{get,set}_drvdata()Libo Chen
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usb: phy-tegra-usb: use platform_{get,set}_drvdata()Libo Chen
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usb: acm gadget: Null termintate strings tableGraham Williams
The gadget strings table should be null terminated. usb_gadget_get_string() loops through the table expecting a null at the end of the list. Signed-off-by: Graham Williams <gwilli@broadcom.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30regulator: lp872x: Make REGULATOR_LP872X depend on I2C rather than I2C=yAxel Lin
lp872x regulator driver can be built a module after commit 631a1fc "regulator: build: Allow most regulators to be built as modules". Make REGULATOR_LP872X depend on I2C to allow building lp872x module when I2C=m. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30regulator: tps65217: Convert to use linear rangesAxel Lin
Below is the equation in original code: tps65217_uv1_ranges: 0 ... 24: uV = vsel * 25000 + 900000; 25 ... 52: uV = (vsel - 24) * 50000 + 1500000; = (vsel - 25) * 50000 + 1550000; 53 ... 55: uV = (vsel - 52) * 100000 + 2900000; = (vsel - 53) * 100000 + 3000000; 56 ... 62: uV = 3300000; tps65217_uv2_ranges: 0 ... 8: uV = vsel * 50000 + 1500000; 9 ... 13: uV = (vsel - 8) * 100000 + 1900000; = (vsel - 9) * 100000 + 2000000; 14 ... 31: uV = (vsel - 13) * 50000 + 2400000; = (vsel - 14) * 50000 + 2450000; The voltage tables are composed of linear ranges. This patch converts this driver to use multiple linear ranges APIs. In original code, voltage range for DCDC1 is 900000 ~ 1800000 and voltage range for DCDC3 is 900000 ~ 1500000. This patch separates the range 25~52 in tps65217_uv1_ranges table to two linear ranges: 25~30 and 31~52. This change makes it possible to reuse the same linear_ranges table for DCDCx. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30regulator: da9063: Use IS_ERR to check return value of regulator_register()Axel Lin
regulator_register() does not return NULL, it returns ERR_PTR on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30regulator: da9063: Optimize da9063_set_current_limit implementationAxel Lin
All the current limit tables have the values in ascend order. So we can slightly optimize the for loop iteration because the first match is the minimal value. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: Don't use smp_processor_id() in preemptible context cpufreq: governor: Fix typos in comments cpufreq: governors: Remove duplicate check of target freq in supported range cpufreq: Fix timer/workqueue corruption due to double queueing cpufreq: imx6q: Fix clock enable balance cpufreq: tegra: fix the wrong clock name
2013-08-30Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: coupled: fix race condition between pokes and safe state cpuidle: coupled: abort idle if pokes are pending cpuidle: coupled: disable interrupts after entering safe state
2013-08-30Merge branch 'acpi-hotplug'Rafael J. Wysocki
* acpi-hotplug: ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues
2013-08-30Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result
2013-08-30s390/pci: use virtual memory for iommu bitmapSebastian Ott
The bitmap used to mark dma mappings can be quite large on systems with huge amounts of memory. Use virtual memory for this bitmap. Suggested-by: Alexander Schmidt <alexschm@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/cio: fix unlocked access of global bitmapSebastian Ott
Access to the slow_subchannel_set has to be secured via the slow_subchannel_lock. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: update function handle after resume from hibernateSebastian Ott
Function handles may change while the system was in hibernation use list pci functions and update the function handles. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: try harder to modify a functionSebastian Ott
In rare situations a PCI function can report a busy condition when we issue the modify pci function command. A temporary busy condition can exceed 1 second but not 2 seconds. Increase the time until we report an error to 2 seconds. Also increase the time we sleep between the retries to reduce the load in this case. Suggested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: split lpfSebastian Ott
List pci functions is used to query and iterate over pci functions. This function currently has 2 users - initial device discovery and rescan after a machine check. Instead of having a multipurpose function pass a callback which gets called for each pci function. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/hibernate: add early resume functionSebastian Ott
Some functions that do arch specific resume actions are called directly from swsusp_asm64.S . Before we add another function call provide a generic s390_early_resume function which can be used for this purpose. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: add recover sysfs knobSebastian Ott
Add an arch specific attribute to recover a pci function from an error state or config space blockage. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: use claim_resourceSebastian Ott
Use pci_claim_resource to find and request bus ressources in pcibios_add_device. Also move some (de)initialization stuff to pcibios_enable_device/pcibios_disable_device. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci/hotplug: convert to be builtin onlySebastian Ott
Convert s390' pci hotplug to be builtin only, with no module option. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-29Merge branch 'for-3.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "During the percpu reference counting update which was merged during v3.11-rc1, the cgroup destruction path was updated so that a cgroup in the process of dying may linger on the children list, which was necessary as the cgroup should still be included in child/descendant iteration while percpu ref is being killed. Unfortunately, I forgot to update cgroup destruction path accordingly and cgroup destruction may fail spuriously with -EBUSY due to lingering dying children even when there's no live child left - e.g. "rmdir parent/child parent" will usually fail. This can be easily fixed by iterating through the children list to verify that there's no live child left. While this is very late in the release cycle, this bug is very visible to userland and I believe the fix is relatively safe. Thanks Hugh for spotting and providing fix for the issue" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix rmdir EBUSY regression in 3.11
2013-08-29Merge branch 'for-3.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "This contains one fix which could lead to system-wide lockup on !PREEMPT kernels. It's very late in the cycle but this definitely is a -stable material. The problem is that workqueue worker tasks may process unlimited number of work items back-to-back without every yielding inbetween. This usually isn't noticeable but a work item which re-queues itself waiting for someone else to do something can deadlock with stop_machine. stop_machine will ensure nothing else happens on all other cpus and the requeueing work item will reqeueue itself indefinitely without ever yielding and thus preventing the CPU from entering stop_machine. Kudos to Jamie Liu for spotting and diagnosing the problem. This can be trivially fixed by adding cond_resched() after processing each work item" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: cond_resched() after processing each work item
2013-08-29Merge tag 'nfs-for-3.11-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfix from Trond Myklebust: "Stable patch to fix a highmem-related data corruption issue on 32-bit ARM platforms" * tag 'nfs-for-3.11-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix memory corruption issue on 32-bit highmem systems
2013-08-29Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
2013-08-30drm/vmwgfx: Split GMR2_REMAP commands if they are to largeJakob Bornecrantz
This fixes the piglit test texturing/max-texture-size causing the VM to die due to a too large SVGA command. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Biran Paul <brianp@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30Merge tag 'drm-intel-fixes-2013-08-30' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a one-line patch to fix a black screen issue on rare ivb machines, cc: stable. Normally I'd just shovel this into the -next pull request this late in the -rc cycle, but Linus was making noises about not getting real fixes which are cc: stable. So here we go ;-) * tag 'drm-intel-fixes-2013-08-30' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: ivb: fix edp voltage swing reg val
2013-08-30drm/i915: ivb: fix edp voltage swing reg valImre Deak
Fix the typo introduced in commit 1a2eb4604b85c5efb343da8a4dcf41288fcfca85 Author: Keith Packard <keithp@keithp.com> Date: Wed Nov 16 16:26:07 2011 -0800 drm/i915: Hook up Ivybridge eDP This fixes eDP link-training failures and cases where all voltage swing /pre-emphasis levels were tried and failed during clock recovery and - as a fallback - we go on to do channel equalization with the last voltage swing/pre-emphasis level which will succeed. Both issues can lead to a blank screen. v2: - improve commit message CC: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880 Tested-by: Jeremy Moles <cubicool@gmail.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-29PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when availableNeil Horman
This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29Merge tag 'iio-for-3.12c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of new drivers, cleanups and features for IIO in the 3.12 cycle. New drivers 1) Bosh BMA180 accelerometer + a new sysfs abi element, power_mode to allow for device that trade off accuracy and power usage. Cleanups 1) Another lot of devm_iio_device_alloc patches 2) An code ordering bug in the twl6030 driver introduced earlier in this cycle. New features 1) at91 adc driver rework to support a wider range of parts and drop the necessity for some of the current device tree elements. This is a precursor to introducing input support which is still under review.
2013-08-29iio: at91: Use different prescal, startup mask in MR for different IPJosh Wu
For at91 boards, there are different IPs for adc. Different IPs has different STARTUP & PRESCAL mask in ADC_MR. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-29perf trace: Honor target pid / tid options when analyzing a fileDavid Ahern
Allows capture of raw_syscall events for all processes or threads in a task and then analyzing specific ones. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377750593-48046-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 12:28:28 +0000