summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-11kernel/trace: Fix cleanup logic of enable_trace_eprobeTzvetomir Stoyanov (VMware)
The enable_trace_eprobe() function enables all event probes, attached to given trace probe. If an error occurs in enabling one of the event probes, all others should be roll backed. There is a bug in that roll back logic - instead of all event probes, only the failed one is disabled. Link: https://lore.kernel.org/all/20230703042853.1427493-1-tz.stoyanov@gmail.com/ Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events") Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-07-10nvme: add BOGUS_NID quirk for Samsung SM953Pankaj Raghav
Add the quirk as SM953 is reporting bogus namespace ID. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217593 Reported-by: Clemens Springsguth <cspringsguth@gmail.com> Tested-by: Clemens Springsguth <cspringsguth@gmail.com> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-07-10igc: Handle already enabled taprio offload for basetime 0Florian Kauer
Since commit e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") it is possible to enable taprio offload with a basetime of 0. However, the check if taprio offload is already enabled (and thus -EALREADY should be returned for igc_save_qbv_schedule) still relied on adapter->base_time > 0. This can be reproduced as follows: # TAPRIO offload (flags == 0x2) and base-time = 0 sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x2 # The second call should fail with "Error: Device failed to setup taprio offload." # But that only happens if base-time was != 0 sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x2 Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Do not enable taprio offload for invalid argumentsFlorian Kauer
Only set adapter->taprio_offload_enable after validating the arguments. Otherwise, it stays set even if the offload was not enabled. Since the subsequent code does not get executed in case of invalid arguments, it will not be read at first. However, by activating and then deactivating another offload (e.g. ETF/TX launchtime offload), taprio_offload_enable is read and erroneously keeps the offload feature of the NIC enabled. This can be reproduced as follows: # TAPRIO offload (flags == 0x2) and negative base-time leading to expected -ERANGE sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time -1000 \ sched-entry S 01 300000 \ flags 0x2 # IGC_TQAVCTRL is 0x0 as expected (iomem=relaxed for reading register) sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1 # Activate ETF offload sudo tc qdisc replace dev enp1s0 parent root handle 6666 mqprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ hw 0 sudo tc qdisc add dev enp1s0 parent 6666:1 etf \ clockid CLOCK_TAI \ delta 500000 \ offload # IGC_TQAVCTRL is 0x9 as expected sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1 # Deactivate ETF offload again sudo tc qdisc delete dev enp1s0 parent 6666:1 # IGC_TQAVCTRL should now be 0x0 again, but is observed as 0x9 sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1 Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Rename qbv_enable to taprio_offload_enableFlorian Kauer
In the current implementation the flags adapter->qbv_enable and IGC_FLAG_TSN_QBV_ENABLED have a similar name, but do not have the same meaning. The first one is used only to indicate taprio offload (i.e. when igc_save_qbv_schedule was called), while the second one corresponds to the Qbv mode of the hardware. However, the second one is also used to support the TX launchtime feature, i.e. ETF qdisc offload. This leads to situations where adapter->qbv_enable is false, but the flag IGC_FLAG_TSN_QBV_ENABLED is set. This is prone to confusion. The rename should reduce this confusion. Since it is a pure rename, it has no impact on functionality. Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10cifs: if deferred close is disabled then close files immediatelyBharath SM
If defer close timeout value is set to 0, then there is no need to include files in the deferred close list and utilize the delayed worker for closing. Instead, we can close them immediately. Signed-off-by: Bharath SM <bharathsm@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-10drm/ttm: Use init_on_free to delay release TTM BOsRajneesh Bhardwaj
Delay release TTM BOs when the kernel default setting is init_on_free. This offloads the overhead of clearing the system memory to the work item and potentially a different CPU. This could be very beneficial when the application does a lot of malloc/free style allocations of system memory. Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Link: https://patchwork.freedesktop.org/patch/msgid/20230708011355.853-1-rajneesh.bhardwaj@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2023-07-10platform/x86: int3472/discrete: set variable ↵Tom Rix
skl_int3472_regulator_second_sensor storage-class-specifier to static smatch reports drivers/platform/x86/intel/int3472/clk_and_regulator.c:263:28: warning: symbol 'skl_int3472_regulator_second_sensor' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230702134419.3438361-1-trix@redhat.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-10platform/x86/intel/tpmi: Prevent overflow for cap_offsetSrinivas Pandruvada
cap_offset is a u16 field, so multiplying with TPMI_CAP_OFFSET_UNIT (which is equal to 1024) to covert to bytes will cause overflow. This will be a problem once more TPMI features are added. This field is not used except for calculating pfs->vsec_offset. So, leave cap_offset field unchanged and multiply with TPMI_CAP_OFFSET_UNIT while calculating pfs->vsec_offset. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20230622195717.3125088-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-10drm/amdgpu: Fix errors & warnings in gfx_v10_0.cSrinivasan Shanmugam
Fix the below checkpatch errors & warnings: ERROR: that open brace { should be on the previous line ERROR: space prohibited before that ',' (ctx:WxV) ERROR: space required after that ',' (ctx:WxV) ERROR: code indent should use tabs where possible ERROR: switch and case should be at the same indent WARNING: please, no spaces at the start of a line WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: space prohibited before semicolon WARNING: Block comments use a trailing */ on a separate line WARNING: Block comments use * on subsequent lines WARNING: braces {} are not necessary for any arm of this statement WARNING: Missing a blank line after declarations Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Fix warnings in gfxhub_ v3_0, v3_0_3.cSrinivasan Shanmugam
Fix the below checkpatch warnings: WARNING: static const char * array should probably be static const char * const +static const char *gfxhub_client_ids[] = { WARNING: Prefer 'unsigned int' to bare use of 'unsigned' + unsigned i; WARNING: static const char * array should probably be static const char * const +static const char *gfxhub_client_ids[] = { WARNING: Prefer 'unsigned int' to bare use of 'unsigned' + unsigned i; Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Fix warnings in gmc_v8_0.cSrinivasan Shanmugam
Fix below checkpatch warnings: WARNING: braces {} are not necessary for single statement blocks WARNING: braces {} are not necessary for any arm of this statement WARNING: Block comments should align the * on each line Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: avoid restore process run into dead loop.gaba
In restore process worker, pinned BO cause update PTE fail, then the function re-schedule the restore_work. This will generate dead loop. Signed-off-by: gaba <gaba@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amd/pm: disbale dcefclk device sysnode on GFX v9.4.3 chipYang Wang
v1: the dceflck sysnode is not aviable on GFX v9.4.3 chip. v2: simplify code logic using helper function: amdgpu_device_has_display_hardware(). Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu/vkms: drop redundant set of fb_modifiers_not_supportedGuchun Chen
Due to a coding typo. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Remove else after return statement in ↵Srinivasan Shanmugam
'gfx_v10_0_check_grbm_cam_remapping' Fix below checkpatch warnings: WARNING: else is not generally useful after a break or return + return true; + } else { WARNING: else is not generally useful after a break or return + return true; + } else { Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amd/pm: fix smu i2c data read riskYang Wang
the smu driver_table is used for all types of smu tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..). it is necessary to hold this lock to avoiding data tampering during the i2c read operation. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Fix warnings in gmc_v11_0.cSrinivasan Shanmugam
Fix below checkpatch warnings: WARNING: quoted string split across lines WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: void function return statements are not generally useful WARNING: braces {} are not necessary for any arm of this statement Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Remove else after return statement in 'gmc_v8_0_check_soft_reset'Srinivasan Shanmugam
Fix below checkpatch warnings: WARNING: else is not generally useful after a break or return + return true; + } else { Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Fix warnings in gfxhub_v2_1.cSrinivasan Shanmugam
Fix the below checkpatch warnings: WARNING: static const char * array should probably be static const char * const +static const char *gfxhub_client_ids[] = { WARNING: Prefer 'unsigned int' to bare use of 'unsigned' + unsigned i; WARNING: Missing a blank line after declarations + int i; + adev->gmc.VM_L2_CNTL = RREG32_SOC15(GC, 0, mmGCVM_L2_CNTL); WARNING: Missing a blank line after declarations + int i; + WREG32_SOC15(GC, 0, mmGCVM_L2_CNTL, adev->gmc.VM_L2_CNTL); WARNING: braces {} are not necessary for single statement blocks + if (!time) { + DRM_WARN("failed to wait for GRBM(EA) idle\n"); + } Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Fix errors & warnings in gmc_ v6_0, v7_0.cSrinivasan Shanmugam
Fix below checkpatch errors & warnings: ERROR: trailing statements should be on next line + default: BUG(); ERROR: trailing statements should be on next line WARNING: braces {} are not necessary for single statement blocks WARNING: braces {} are not necessary for any arm of this statement WARNING: Block comments use * on subsequent lines WARNING: Missing a blank line after declarations WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Fix warnings in gmc_v10_0.cSrinivasan Shanmugam
Fix below checkpatch warnings: WARNING: Consider removing the code enclosed by this #if 0 and its #endif WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: quoted string split across lines Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Prefer dev_warn over printkSrinivasan Shanmugam
Fix the below warning: WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ... Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Fix warnings in gfxhub_v2_0.cSrinivasan Shanmugam
Fix the below checkpatch warnings: WARNING: static const char * array should probably be static const char * const +static const char *gfxhub_client_ids[] = { WARNING: Prefer 'unsigned int' to bare use of 'unsigned' + unsigned i; WARNING: Missing a blank line after declarations + u32 tmp; + tmp = RREG32_SOC15(GC, 0, mmGCVM_L2_PROTECTION_FAULT_CNTL); Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Remove redundant GFX v9.4.3 sequenceLijo Lazar
Programming of XCC id is already taken care with partition mode change. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amdgpu: Fix warnings in gfxhub_ v1_0, v1_2.cSrinivasan Shanmugam
Fix the below checkpatch warnings: WARNING: Block comments should align the * on each line + /* + * Raven2 has a HW issue that it is unable to use the WARNING: Prefer 'unsigned int' to bare use of 'unsigned' + unsigned num_level, block_size; WARNING: Prefer 'unsigned int' to bare use of 'unsigned' + unsigned i; WARNING: Missing a blank line after declarations + u32 tmp; + tmp = RREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_CNTL); WARNING: Block comments should align the * on each line + /* + * Raven2 has a HW issue that it is unable to use the WARNING: Prefer 'unsigned int' to bare use of 'unsigned' + unsigned num_level, block_size; Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amd/display: Block optimize on consecutive FAMS enablesWesley Chalmers
[WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10platform/x86: wmi: Replace open coded guid_parse_and_compare()Andy Shevchenko
Even though we have no issues in the code, let's replace the open coded guid_parse_and_compare(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230621151155.78279-2-andriy.shevchenko@linux.intel.com Tested-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-10platform/x86: wmi: Break possible infinite loop when parsing GUIDAndy Shevchenko
The while-loop may break on one of the two conditions, either ID string is empty or GUID matches. The second one, may never be reached if the parsed string is not correct GUID. In such a case the loop will never advance to check the next ID. Break possible infinite loop by factoring out guid_parse_and_compare() helper which may be moved to the generic header for everyone later on and preventing from similar mistake in the future. Interestingly that firstly it appeared when WMI was turned into a bus driver, but later when duplicated GUIDs were checked, the while-loop has been replaced by for-loop and hence no mistake made again. Fixes: a48e23385fcf ("platform/x86: wmi: add context pointer field to struct wmi_device_id") Fixes: 844af950da94 ("platform/x86: wmi: Turn WMI into a bus driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230621151155.78279-1-andriy.shevchenko@linux.intel.com Tested-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-10drm/bridge: cdns-mhdp8546: Fix the interrupt enable/disableNikhil Devshatwar
When removing the tidss driver, there is a warning reported by kernel about an unhandled interrupt for mhdp driver. [ 43.238895] irq 31: nobody cared (try booting with the "irqpoll" option) ... [snipped backtrace] [ 43.330735] handlers: [ 43.333020] [<000000005367c4f9>] irq_default_primary_handler threaded [<000000007e02b601>] cdns_mhdp_irq_handler [cdns_mhdp8546] [ 43.344607] Disabling IRQ #31 This happens because as part of cdns_mhdp_bridge_hpd_disable, driver tries to disable the interrupts. While disabling the SW_EVENT interrupts, it accidentally enables the MBOX interrupts, which are not handled by the driver. Fix this with a read-modify-write to update only required bits. Use the enable / disable function as required in other places. Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-9-a-bhatia1@ti.com
2023-07-10drm/tidss: Update encoder/bridge chain connect modelAradhya Bhatia
With the new encoder/bridge chain model, the display controller driver is required to create a drm_connector entity instead of asking the bridge to do so during drm_bridge_attach. Moreover, the controller driver should create a drm_bridge entity to negotiate bus formats and a 'simple' drm_encoder entity to expose it to userspace. Update the encoder/bridge initialization sequence in tidss as per the new model. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-8-a-bhatia1@ti.com
2023-07-10drm/bridge: sii902x: Set input_bus_flags in atomic_checkAradhya Bhatia
input_bus_flags are specified in drm_bridge_timings (legacy) as well as drm_bridge_state->input_bus_cfg.flags The flags from the timings will be deprecated. Bridges are supposed to validate and set the bridge state flags from atomic_check. Implement atomic_check hook for the same. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-7-a-bhatia1@ti.com
2023-07-10drm/bridge: sii902x: Support format negotiation hooksAradhya Bhatia
With new connector model, sii902x will not create the connector, when DRM_BRIDGE_ATTACH_NO_CONNECTOR is set and SoC driver will rely on format negotiation to setup the encoder format. Support format negotiations hooks in the drm_bridge_funcs. Use helper functions for state management. Input format is selected to MEDIA_BUS_FMT_RGB888_1X24 as default, as is the case with older model. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-6-a-bhatia1@ti.com
2023-07-10drm/bridge: mhdp8546: Set input_bus_flags from atomic_checkNikhil Devshatwar
input_bus_flags are specified in drm_bridge_timings (legacy) as well as drm_bridge_state->input_bus_cfg.flags The flags from the timings will be deprecated. Bridges are supposed to validate and set the bridge state flags from atomic_check. Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com> [a-bhatia1: replace timings in cdns_mhdp_platform_info by input_bus_flags] Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-5-a-bhatia1@ti.com
2023-07-10drm/bridge: mhdp8546: Add minimal format negotiationNikhil Devshatwar
With new connector model, mhdp bridge will not create the connector and SoC driver will rely on format negotiation to setup the encoder format. Support minimal format negotiations hooks in the drm_bridge_funcs. Complete format negotiation can be added based on EDID data. This patch adds the minimal required support to avoid failure after moving to new connector model. Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com> [a-bhatia1: Drop the output_fmt check condition] Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-4-a-bhatia1@ti.com
2023-07-10drm/bridge: tfp410: Set input_bus_flags in atomic_checkNikhil Devshatwar
input_bus_flags are specified in drm_bridge_timings (legacy) as well as drm_bridge_state->input_bus_cfg.flags The flags from the timings will be deprecated. Bridges are supposed to validate and set the bridge state flags from atomic_check. Implement atomic_check hook for the same. Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-3-a-bhatia1@ti.com
2023-07-10drm/bridge: tfp410: Support format negotiation hooksNikhil Devshatwar
With new connector model, tfp410 will not create the connector and SoC driver will rely on format negotiation to setup the encoder format. Support format negotiations hooks in the drm_bridge_funcs. Use helper functions for state management. Input format is the one selected by the bridge from DT properties. Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com> [a-bhatia1: Removed output fmt condition check] Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-2-a-bhatia1@ti.com
2023-07-10drm/ttm: never consider pinned BOs for eviction&swapChristian König
There is a small window where we have already incremented the pin count but not yet moved the bo from the lru to the pinned list. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: Pelloux-Prayer, Pierre-Eric <Pierre-eric.Pelloux-prayer@amd.com> Tested-by: Pelloux-Prayer, Pierre-Eric <Pierre-eric.Pelloux-prayer@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230707120826.3701-1-christian.koenig@amd.com
2023-07-10drm/i915: Don't rely that 2 VDSC engines are always enough for pixel rateStanislav Lisovskiy
We are currently having FIFO underruns happening for kms_dsc test case, problem is that, we check if curreny cdclk is >= pixel rate only if there is a single VDSC engine enabled(i.e dsc_split=false) however if we happen to have 2 VDSC engines enabled, we just kinda rely that this would be automatically enough. However pixel rate can be even >= than VDSC clock(cdclk) * 2, so in that case even with 2 VDSC engines enabled, we still need to tweak it up. So lets compare pixel rate with cdclk * VDSC engine count and check if it still requires bumping up. Previously we had to bump up CDCLK many times for similar reasons. v2: - Use new intel_dsc_get_num_vdsc_instances to determine number of VDSC engines, instead of slice count(Ankit Nautiyal) v3: - s/u8/int/ (Jani Nikula) v4: - Remove slice count mentions(Ankit Nautiyal) - Use DIV_ROUND_UP in order to make sure that resulting CDCLK would be always >= than required, after division(Ankit Nautiyal) Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230704131758.14024-3-stanislav.lisovskiy@intel.com
2023-07-10drm/i915: Add helper function for getting number of VDSC enginesStanislav Lisovskiy
Currently we are using dsc_split and bigjoiner variables for determining amount of VDSC instances, however that might change in future, if we happen to have more of those. So lets pack all that logic into single function for convenience, so that at least this isn't hardcoded throughout the whole VDSC code. v2: - s/u8/int/ (Jani Nikula) Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230704131758.14024-2-stanislav.lisovskiy@intel.com
2023-07-10drm/i915: Fix one wrong caching mode enum usageTvrtko Ursulin
Commit a4d86249c773 ("drm/i915/gt: Provide a utility to create a scratch buffer") mistakenly passed in uapi I915_CACHING_CACHED as argument to i915_gem_object_set_cache_coherency(), which actually takes internal enum i915_cache_level. No functional issue since the value matches I915_CACHE_LLC (1 == 1), which is the intended caching mode, but lets clean it up nevertheless. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: a4d86249c773 ("drm/i915/gt: Provide a utility to create a scratch buffer") Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707125503.3965817-1-tvrtko.ursulin@linux.intel.com
2023-07-10drm/i915: Remove dead code from gen8_pte_encodeTvrtko Ursulin
Commit 9275277d5324 ("drm/i915: use pat_index instead of cache_level") added a dedicated gen12_pte_encode but forgot to remove the Gen12 specific bit from gen8_pte_encode. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 9275277d5324 ("drm/i915: use pat_index instead of cache_level") Cc: Fei Yang <fei.yang@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Fei Yang <fei.yang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707124644.3965281-1-tvrtko.ursulin@linux.intel.com
2023-07-10drm/bridge: tc358767: Use devm_clk_get_enabled() helperChristophe JAILLET
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the need of a dedicated function used with devm_add_action_or_reset(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/208a15ce4e01973daf039ad7bc0f9241f650b3af.1672415956.git.christophe.jaillet@wanadoo.fr
2023-07-10spi: bcm63xx: fix max prepend lengthJonas Gorski
The command word is defined as following: /* Command */ #define SPI_CMD_COMMAND_SHIFT 0 #define SPI_CMD_DEVICE_ID_SHIFT 4 #define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 #define SPI_CMD_ONE_BYTE_SHIFT 11 #define SPI_CMD_ONE_WIRE_SHIFT 12 If the prepend byte count field starts at bit 8, and the next defined bit is SPI_CMD_ONE_BYTE at bit 11, it can be at most 3 bits wide, and thus the max value is 7, not 15. Fixes: b17de076062a ("spi/bcm63xx: work around inability to keep CS up") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://lore.kernel.org/r/20230629071453.62024-1-jonas.gorski@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-10MAINTAINERS: Add myself as a maintainer for Microchip SPIRyan Wanner
Tudor is not with Microchip anymore. I have worked lately with Microchip SPI drivers replacing Tudor with myself as this maintainer. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20230630161700.448747-1-Ryan.Wanner@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-10pinctrl: renesas: rzg2l: Handle non-unique subnode namesBiju Das
Currently, sd1 and sd0 have unique subnode names 'sd1_mux' and 'sd0_mux'. If we change these to non-unique subnode names such as 'mux' this can lead to the below conflict as the RZ/G2L pin control driver considers only the names of the subnodes. pinctrl-rzg2l 11030000.pinctrl: pin P47_0 already requested by 11c00000.mmc; cannot claim for 11c10000.mmc pinctrl-rzg2l 11030000.pinctrl: pin-376 (11c10000.mmc) status -22 pinctrl-rzg2l 11030000.pinctrl: could not request pin 376 (P47_0) from group mux on device pinctrl-rzg2l renesas_sdhi_internal_dmac 11c10000.mmc: Error applying setting, reverse things back Fix this by constructing unique names from the node names of both the pin control configuration node and its child node, where appropriate. Based on the work done by Geert for the RZ/V2M pinctrl driver. Fixes: c4c4637eb57f ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230704111858.215278-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-07-10pinctrl: renesas: rzv2m: Handle non-unique subnode namesGeert Uytterhoeven
The eMMC and SDHI pin control configuration nodes in DT have subnodes with the same names ("data" and "ctrl"). As the RZ/V2M pin control driver considers only the names of the subnodes, this leads to conflicts: pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by 85000000.mmc; cannot claim for 85020000.mmc pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22 renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting, reverse things back Fix this by constructing unique names from the node names of both the pin control configuration node and its child node, where appropriate. Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Fixes: 92a9b825257614af ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://lore.kernel.org/r/607bd6ab4905b0b1b119a06ef953fa1184505777.1688396717.git.geert+renesas@glider.be
2023-07-10HID: amd_sfh: Fix for shift-out-of-boundsBasavaraj Natikar
Shift operation of 'exp' and 'shift' variables exceeds the maximum number of shift values in the u32 range leading to UBSAN shift-out-of-bounds. ... [ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50 [ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int' [ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10 [ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023 [ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh] [ 6.120687] Call Trace: [ 6.120690] <TASK> [ 6.120694] dump_stack_lvl+0x48/0x70 [ 6.120704] dump_stack+0x10/0x20 [ 6.120707] ubsan_epilogue+0x9/0x40 [ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170 [ 6.120720] ? psi_group_change+0x25f/0x4b0 [ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh] [ 6.120739] get_input_rep+0x57/0x340 [amd_sfh] [ 6.120748] ? __schedule+0xba7/0x1b60 [ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh] [ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh] [ 6.120772] process_one_work+0x229/0x430 [ 6.120780] worker_thread+0x4a/0x3c0 [ 6.120784] ? __pfx_worker_thread+0x10/0x10 [ 6.120788] kthread+0xf7/0x130 [ 6.120792] ? __pfx_kthread+0x10/0x10 [ 6.120795] ret_from_fork+0x29/0x50 [ 6.120804] </TASK> ... Fix this by adding the condition to validate shift ranges. Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality") Cc: stable@vger.kernel.org Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com> Link: https://lore.kernel.org/r/20230707065722.9036-3-Basavaraj.Natikar@amd.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2023-07-10HID: amd_sfh: Rename the float32 variableBasavaraj Natikar
As float32 is also used in other places as a data type, it is necessary to rename the float32 variable in order to avoid confusion. Cc: stable@vger.kernel.org Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com> Link: https://lore.kernel.org/r/20230707065722.9036-2-Basavaraj.Natikar@amd.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2023-07-10sched/psi: use kernfs polling functions for PSI trigger pollingSuren Baghdasaryan
Destroying psi trigger in cgroup_file_release causes UAF issues when a cgroup is removed from under a polling process. This is happening because cgroup removal causes a call to cgroup_file_release while the actual file is still alive. Destroying the trigger at this point would also destroy its waitqueue head and if there is still a polling process on that file accessing the waitqueue, it will step on the freed pointer: do_select vfs_poll do_rmdir cgroup_rmdir kernfs_drain_open_files cgroup_file_release cgroup_pressure_release psi_trigger_destroy wake_up_pollfree(&t->event_wait) // vfs_poll is unblocked synchronize_rcu kfree(t) poll_freewait -> UAF access to the trigger's waitqueue head Patch [1] fixed this issue for epoll() case using wake_up_pollfree(), however the same issue exists for synchronous poll() case. The root cause of this issue is that the lifecycles of the psi trigger's waitqueue and of the file associated with the trigger are different. Fix this by using kernfs_generic_poll function when polling on cgroup-specific psi triggers. It internally uses kernfs_open_node->poll waitqueue head with its lifecycle tied to the file's lifecycle. This also renders the fix in [1] obsolete, so revert it. [1] commit c2dbe32d5db5 ("sched/psi: Fix use-after-free in ep_remove_wait_queue()") Fixes: 0e94682b73bf ("psi: introduce psi monitor") Closes: https://lore.kernel.org/all/20230613062306.101831-1-lujialin4@huawei.com/ Reported-by: Lu Jialin <lujialin4@huawei.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20230630005612.1014540-1-surenb@google.com
generated by cgit (git 2.34.1) at 2025-09-14 11:32:27 +0000