summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-22[media] saa7134-input: key up events not sent after suspend/resumeVadim Solomin
On my AverMedia AverTV Studio 507, key up events are no longer sent after a suspend-to-disk/resume cycle, resulting in "stuck" keys. Apparently, for key up events to be generated, a certain GPIO pin must be set. Currently it's set in saa7134_input_init1(), but that function is not called on device resume. I suggest that code be moved to __saa7134_ir_start(), which is called both on init and resume. Signed-off-by: Vadim Solomin <vadic052@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] stv0367: typo in function parameterDan Carpenter
The CellsCoeffs arrays are [3][6][5] not [2][6][5]. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] stv0367: signedness bug in stv0367_get_tuner_freq()Dan Carpenter
We use err to store negative error codes so it should be signed. And if we return an error from stv0367_get_tuner_freq() that needs to be handled properly as well. (param->frequency is a u32). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] via-camera: Fix OLPC serial checkDaniel Drake
The code that checks the OLPC serial port is never built at the moment, because CONFIG_OLPC_XO_1_5 doesn't exist and probably won't be added. Fix it so that it gets compiled in, only executes on OLPC laptops, and move the check into the probe routine. The compiler is smart enough to eliminate this code when CONFIG_OLPC=n (due to machine_is_olpc() always returning false). Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] Change to 32 bit and add other remote controls for lme2510Malcolm Priestley
These bubble button remote controls appear to be generic from China. These are the three variants known to be supplied with DM04/QQBOX DVB-S They could well be supplied with other devices from the region. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] DM04/QQBOX Update V1.76 - use 32 bit remote decodingMalcolm Priestley
Use 32 bit decoding to add support for more than one variant of remote control. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] DM04 LME2510(C) Sharp BS2F7HZ0194 Firmware InformationMalcolm Priestley
DM04 LME2510(C) Sharp BS2F7HZ0194 Firmware Information Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v180 - DM04/QQBOX added support for BS2F7HZ0194 versionsMalcolm Priestley
Old versions of these boxes have the BS2F7HZ0194 tuner module on both the LME2510 and LME2510C. Firmware dvb-usb-lme2510-s0194.fw and/or dvb-usb-lme2510c-s0194.fw files are required. See Documentation/dvb/lmedm04.txt Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22slub: Add statistics for this_cmpxchg_double failuresChristoph Lameter
Add some statistics for debugging. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-03-22slub: Add missing irq restore for the OOM pathChristoph Lameter
OOM path is missing the irq restore in the CONFIG_CMPXCHG_LOCAL case. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-03-22rbd: use watch/notify for changes in rbd headerYehuda Sadeh
Send notifications when we change the rbd header (e.g. create a snapshot) and wait for such notifications. This allows synchronizing the snapshot creation between different rbd clients/rools. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22libceph: add lingering request and watch/notify event frameworkYehuda Sadeh
Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22ASoC: Support !REGULATOR build for sgtl5000Mark Brown
The regulator is optional depending on board design. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-22dmaengine/dmatest: Pass timeout via module paramsViresh Kumar
When we try to test all channels present on our controller together, some channels of lower priority may be very slow as compared to others. If number of transfers is unlimited, some channels may timeout and will not finish within 3 seconds. Thus, while doing such regress testing we may need to have higher value of timeouts. This patch adds support for passing timeout value via module parameters. Default value is 3 msec, a negative value means max timeout possible. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-03-22dma: let IMX_DMA depend on IMX_HAVE_DMA_V1 instead of an explicit list of SoCsUwe Kleine-König
As a side effect this makes IMX_DMA selectable on i.MX21 again, because the symbol ARCH_MX21 doesn't exist (MACH_MX21 would have been more correct). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-03-22ASoC: tlv320dac33: Fix inconsistent spinlock usagePeter Ujfalusi
The lock is used within the interrupt handler. Correct the spinlock usage, and use irqsave/irqrestore flavour of spin_lock/unlock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-22[IA64] New syscalls for 2.6.39Tony Luck
Four new syscalls: sys_name_to_handle_at sys_open_by_handle_at sys_clock_adjtime sys_syncfs Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-03-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: make fuse_dentry_revalidate() RCU aware fuse: make fuse_permission() RCU aware fuse: wakeup pollers on connection release/abort fuse: reduce size of struct fuse_request
2011-03-22Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: xen: update mask_rw_pte after kernel page tables init changes xen: set max_pfn_mapped to the last pfn mapped x86: Cleanup highmap after brk is concluded Fix up trivial onflict (added header file includes) in arch/x86/mm/init_64.c
2011-03-22Merge branch 'next-samsung' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'next-samsung' of git://git.fluff.org/bjdooks/linux: ARM: H1940/RX1950: Change default LED triggers ARM: S3C2442: RX1950: Add support for LED blinking ARM: S3C2442: RX1950: Retain LEDs state in suspend ARM: S3C2410: H1940: Fix lcd_power_set function ARM: S3C2410: H1940: Add battery support ARM: S3C2410: H1940: Use leds-gpio driver for LEDs managing ARM: S3C2410: H1940: Make h1940-bluetooth.c compile again ARM: S3C2410: H1940: Add keys device
2011-03-22Merge branch 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linux: i2c-pxa2xx: Don't clear isr bits too early i2c-pxa2xx: Fix register offsets i2c-pxa2xx: pass of_node from platform driver to adapter and publish i2c-pxa2xx: check timeout correctly i2c-pxa2xx: add support for shared IRQ handler i2c-pxa2xx: Add PCI support for PXA I2C controller ARM: pxa2xx: reorganize I2C files i2c-pxa2xx: use dynamic register layout i2c-mxs: set controller to pio queue mode after reset i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH i2c/busses: Add support for Diolan U2C-12 USB-I2C adapter
2011-03-22tracing: Fix set_ftrace_filter probe function displayJiri Olsa
If one or more function probes (like traceon) are enabled, and there's no other function filter, the first probe func is skipped (which one depends on the position in the hash). $ echo sys_open:traceon sys_close:traceon > ./set_ftrace_filter $ cat set_ftrace_filter #### all functions enabled #### sys_close:traceon:unlimited $ The reason was, that in the case of no other function filter, the func_pos was not properly updated before calling t_hash_start. Signed-off-by: Jiri Olsa <jolsa@redhat.com> LKML-Reference: <1297874134-7008-1-git-send-email-jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-22IB: Increase DMA max_segment_size on Mellanox hardwareDavid Dillow
By default, each device is assumed to be able only handle 64 KB chunks during DMA. By giving the segment size a larger value, the block layer will coalesce more S/G entries together for SRP, allowing larger requests with the same sg_tablesize setting. The block layer is the only direct user of it, though a few IOMMU drivers reference it as well for their *_map_sg coalescing code. pci-gart_64 on x86, and a smattering on on sparc, powerpc, and ia64. Since other IB protocols could potentially see larger segments with this, let's check those: - iSER is fine, because you limit your maximum request size to 512 KB, so we'll never overrun the page vector in struct iser_page_vec (128 entries currently). It is independent of the DMA segment size, and handles multi-page segments already. - IPoIB is fine, as it maps each page individually, and doesn't use ib_dma_map_sg(). - RDS appears to do the right thing and has no dependencies on DMA segment size, but I don't claim to have done a complete audit. - NFSoRDMA and 9p are OK -- they do not use ib_dma_map_sg(), so they doesn't care about the coalescing. - Lustre's ko2iblnd does not care about coalescing -- it properly walks the returned sg list. This patch ups the value on Mellanox hardware to 1 GB, which matches reported firmware limits on mlx4. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Dont define useless label in the !CONFIG_CMPXCHG_LOCAL case slab,rcu: don't assume the size of struct rcu_head slub,rcu: don't assume the size of struct rcu_head slub: automatically reserve bytes at the end of slab Lockless (and preemptless) fastpaths for slub slub: Get rid of slab_free_hook_irq() slub: min_partial needs to be in first cacheline slub: fix ksize() build error slub: fix kmemcheck calls to match ksize() hints Revert "slab: Fix missing DEBUG_SLAB last user" mm: Remove support for kmem_cache_name()
2011-03-22sd: Fail discard requests when logical block provisioning has been disabledMartin K. Petersen
Ensure that we kill discard requests after logical block provisioning has been disabled in sysfs. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) IPVS: Use global mutex in ip_vs_app.c ipvs: fix a typo in __ip_vs_control_init() veth: Fix the byte counters net ipv6: Fix duplicate /proc/sys/net/ipv6/neigh directory entries. macvlan: Fix use after free of struct macvlan_port. net: fix incorrect spelling in drop monitor protocol can: c_can: Do basic c_can configuration _before_ enabling the interrupts net/appletalk: fix atalk_release use after free ipx: fix ipx_release() snmp: SNMP_UPD_PO_STATS_BH() always called from softirq l2tp: fix possible oops on l2tp_eth module unload xfrm: Fix initialize repl field of struct xfrm_state netfilter: ipt_CLUSTERIP: fix buffer overflow netfilter: xtables: fix reentrancy netfilter: ipset: fix checking the type revision at create command netfilter: ipset: fix address ranges at hash:*port* types niu: Rename NIU parent platform device name to fix conflict. r8169: fix a bug in rtl8169_init_phy() bonding: fix a typo in a comment ftmac100: use resource_size() ...
2011-03-22sh: Conver to asm-generic/sizes.h.Paul Mundt
A trivial conversion for the most part. EDOSK7760 is special, but uses a non-power-of-2-aligned size, so just drop the SZ_xx helper and open-code it for the sake of simplicity. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-22sh: wire up sys_syncfs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-22x86, mpparse: Move check_slot into CONFIG_X86_IO_APIC contextRakib Mullick
When CONFIG_X86_MPPARSE=y and CONFIG_X86_IO_APIC=n, then we get the following warning: arch/x86/kernel/mpparse.c:723: warning: 'check_slot' defined but not used So, put check_slot into CONFIG_X86_IO_APIC context. Its only called from CONFIG_X86_IO_APIC=y context. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> LKML-Reference: <AANLkTinsUfGc=NG_GeH_B+zFVu+DXJzZbJKdQLscqfuH@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-22ALSA: hda - VIA: Fix VT1708 can't build up Headphone control issueLydia Wang
Since VT1708 didn't support the control of getting connection number, building of headphone control will fail in via_hp_build() function. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-22ALSA: hda - VIA: Correct stream names for VT1818SLydia Wang
Correct stream names of analog playback and capture streams for VT1818S. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-22ALSA: hda - VIA: Fix codec type for VT1708BCE at the right timingLydia Wang
Add get_codec_type() in via_new_spec() function to make sure getting correct codec type before building mixer controls. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-22ALSA: hda - VIA: Fix invalid A-A path volume adjust issueLydia Wang
Modify vt_auto_create_analog_input_ctls() function to fix invalid a-a path volume adjust issue for VT1708S, VT1702 and VT1716S codecs. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-22ALSA: hda - VIA: Add missing support for VT1718S in A-A pathLydia Wang
Modify mute_aa_path() function to support VT1718S codec. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-22ALSA: hda - VIA: Fix independent headphone no sound issueLydia Wang
Modify via_independent_hp_put() function to support VT1718S and VT1812 codecs, and fix independent headphone no sound issue. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-22ALSA: hda - VIA: Fix stereo mixer recording no sound issueLydia Wang
Modify function via_mux_enum_put() to fix stereo mixer recording no sound issue. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-22[media] drivers/media/video/tlg2300/pd-video.c: Remove second mutex_unlock ↵Alexander Strakh
in pd_vidioc_s_fmt Error path in file drivers/media/video/tlg2300/pd-video.c: 1. First mutex_unlock on &pd->lock in line 767 (in function that called from line 805) 2. Second in line 806 805 pd_vidioc_s_fmt(pd, &f->fmt.pix); 806 mutex_unlock(&pd->lock); Found by Linux Device Drivers Verification Project Signed-off-by: Alexander Strakh <strakh@ispras.ru> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] radio-wl1273: remove unused wl1273_device->workTejun Heo
wl1273_device->work is unused. Remove it along with the spurious flush_scheduled_work() call in wl1273_fm_module_exit(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] Zarlink zl10036 DVB-S: Fix mem leak in zl10036_attachJesper Juhl
On Thu, 17 Feb 2011, Matthias Schwarzott wrote: > On Sunday 06 February 2011, Jesper Juhl wrote: > > If the memory allocation to 'state' succeeds but we jump to the 'error' > > label before 'state' is assigned to fe->tuner_priv, then the call to > > 'zl10036_release(fe)' at the 'error:' label will not free 'state', but > > only what was previously assigned to 'tuner_priv', thus leaking the memory > > allocated to 'state'. > > There are may ways to fix this, including assigning the allocated memory > > directly to 'fe->tuner_priv', but I did not go for that since the > > additional pointer derefs are more expensive than the local variable, so I > > just added a 'kfree(state)' call. I guess the call to 'zl10036_release' > > might not even be needed in this case, but I wasn't sure, so I left it in. > > > Yeah, that call to zl10036_release can be completely eleminated. > Another thing is: jumping to the error label only makes sense when memory was > already allocated. So the jump in line 471 can be replaced by "return NULL", > as the other error handling before allocation: > if (NULL == config) { > printk(KERN_ERR "%s: no config specified", __func__); > goto error; > } > > I suggest to improve the patch to clean the code up when changing that. > > But I am fine with commiting this patch also if you do not want to change it. > Thank you for your feedback. It makes a lot of sense. Changing it is not a problem :) How about the updated patch below? If the memory allocation to 'state' succeeds but we jump to the 'error' label before 'state' is assigned to fe->tuner_priv, then the call to 'zl10036_release(fe)' at the 'error:' label will not free 'state', but only what was previously assigned to 'tuner_priv', thus leaking the memory allocated to 'state'. This patch fixes the leak and also does not jump to 'error:' before mem has been allocated but instead just returns. Also some small style cleanups. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] V4L: videobuf, don't use dma addr as physicalJiri Slaby
mem->dma_handle is a dma address obtained by dma_alloc_coherent which needn't be a physical address in presence of IOMMU, as a hardware IOMMU can (and most likely) will return a bus address where physical != bus address. So ensure we are remapping (remap_pfn_range) the right page in __videobuf_mmap_mapper by using virt_to_phys(mem->vaddr) and not mem->dma_handle. While at it, use PFN_DOWN instead of explicit shift. [mchehab@redhat.com: Fix compilation breakage due to the lack of a comma] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] uvcvideo: Fix descriptor parsing for video output devicesLaurent Pinchart
Commit 4057ac6ca9a77c4275b34b5925ab5c99557913b1 V4L/DVB (13505): uvcvideo: Refactor chain scan broke output terminals parsing. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] uvcvideo: Fix uvc_fixup_video_ctrl() format searchStephan Lachowsky
The scheme used to index format in uvc_fixup_video_ctrl() is not robust: format index is based on descriptor ordering, which does not necessarily match bFormatIndex ordering. Searching for first matching format will prevent uvc_fixup_video_ctrl() from using the wrong format/frame to make adjustments. Signed-off-by: Stephan Lachowsky <stephan.lachowsky@maxim-ic.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22fbcon: fix situation where fbcon gets deinitialised and can't reinit.Dave Airlie
Situation as follow: 2 GPUs + vesafb + kms. GPU 1 is primary, vesafb binds to it as fb0 radeon loads GPU 0 loads as fb1 GPU 1 loads, vesafb gets kicked off which causes fb0 to unbind console, which causes the dummy console to rebind. this means fbcon_deinit gets called, which calls fbcon_exit since the console isn't bound anymore and we set fbcon_has_exited. GPU 1 creates a new fb0 which is primary and we want to be console. fbcon_fb_registered gets called sets the primary up and calls set_con2fb_map, however as fbcon_has_exited is set nothing further ever happens. This patch bypasses the fbcon_has_exited and checks if the console is unbound, if its unbound it calls the fbcon_takeover which calls the vt layer to call the fbcon_startup method and everthing works. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-22video, sm501: add OF binding to support SM501Heiko Schocher
- add binding to OF, compatible name "smi,sm501" Signed-off-by: Heiko Schocher <hs@denx.de> cc: linux-fbdev@vger.kernel.org cc: devicetree-discuss@ozlabs.org cc: Ben Dooks <ben@simtec.co.uk> cc: Vincent Sanders <vince@simtec.co.uk> cc: Samuel Ortiz <sameo@linux.intel.com> cc: linux-kernel@vger.kernel.org cc: Randy Dunlap <rdunlap@xenotime.net> cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-22video, sm501: add edid and commandline supportHeiko Schocher
- add commandline options: sm501fb.mode: Specify resolution as "<xres>x<yres>[-<bpp>][@<refresh>]" sm501fb.bpp: Specify bit-per-pixel if not specified mode - Add support for encoding display mode information in the device tree using verbatim EDID block. If the "edid" entry in the "smi,sm501" node is present, the driver will build mode database using EDID data and allow setting the display modes from this database. Signed-off-by: Heiko Schocher <hs@denx.de> cc: linux-fbdev@vger.kernel.org cc: devicetree-discuss@ozlabs.org cc: Ben Dooks <ben@simtec.co.uk> cc: Vincent Sanders <vince@simtec.co.uk> cc: Samuel Ortiz <sameo@linux.intel.com> cc: linux-kernel@vger.kernel.org cc: Randy Dunlap <rdunlap@xenotime.net> cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-22video, sm501: add I/O functions for use on powerpcHeiko Schocher
- add read/write functions for using this driver also on powerpc plattforms Signed-off-by: Heiko Schocher <hs@denx.de> cc: linux-fbdev@vger.kernel.org cc: devicetree-discuss@ozlabs.org cc: Ben Dooks <ben@simtec.co.uk> cc: Vincent Sanders <vince@simtec.co.uk> cc: Samuel Ortiz <sameo@linux.intel.com> cc: linux-kernel@vger.kernel.org cc: Randy Dunlap <rdunlap@xenotime.net> cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-22ipv4: optimize route adding on secondary promotionJulian Anastasov
Optimize the calling of fib_add_ifaddr for all secondary addresses after the promoted one to start from their place, not from the new place of the promoted secondary. It will save some CPU cycles because we are sure the promoted secondary was first for the subnet and all next secondaries do not change their place. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22ipv4: remove the routes on secondary promotionJulian Anastasov
The secondary address promotion relies on fib_sync_down_addr to remove all routes created for the secondary addresses when the old primary address is deleted. It does not happen for cases when the primary address is also in another subnet. Fix that by deleting local and broadcast routes for all secondaries while they are on device list and by faking that all addresses from this subnet are to be deleted. It relies on fib_del_ifaddr being able to ignore the IPs from the concerned subnet while checking for duplication. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22ipv4: fix route deletion for IPs on many subnetsJulian Anastasov
Alex Sidorenko reported for problems with local routes left after IP addresses are deleted. It happens when same IPs are used in more than one subnet for the device. Fix fib_del_ifaddr to restrict the checks for duplicate local and broadcast addresses only to the IFAs that use our primary IFA or another primary IFA with same address. And we expect the prefsrc to be matched when the routes are deleted because it is possible they to differ only by prefsrc. This patch prevents local and broadcast routes to be leaked until their primary IP is deleted finally from the box. As the secondary address promotion needs to delete the routes for all secondaries that used the old primary IFA, add option to ignore these secondaries from the checks and to assume they are already deleted, so that we can safely delete the route while these IFAs are still on the device list. Reported-by: Alex Sidorenko <alexandre.sidorenko@hp.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22ipv4: match prefsrc when deleting routesJulian Anastasov
fib_table_delete forgets to match the routes by prefsrc. Callers can specify known IP in fc_prefsrc and we should remove the exact route. This is needed for cases when same local or broadcast addresses are used in different subnets and the routes differ only in prefsrc. All callers that do not provide fc_prefsrc will ignore the route prefsrc as before and will delete the first occurence. That is how the ip route del default magic works. Current callers are: - ip_rt_ioctl where rtentry_to_fib_config provides fc_prefsrc only when the provided device name matches IP label with colon. - inet_rtm_delroute where RTA_PREFSRC is optional too - fib_magic which deals with routes when deleting addresses and where the fc_prefsrc is always set with the primary IP for the concerned IFA. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 06:01:50 +0000