summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-12-01drm/radeon/kms: fix typos in disabled vbios codeAlex Deucher
6xx/7xx was hitting the wrong BUS_CNTL reg and bits. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-01Merge remote branch 'intel/drm-intel-fixes' of /ssd/git/drm-next into drm-fixesDave Airlie
* 'intel/drm-intel-fixes' of /ssd/git/drm-next: Revert "drm/i915/dp: use VBT provided eDP params if available" drm/i915: Clear pfit registers when not used by any outputs drm/i915: fix regression due to ba3d8d749b01548b9
2010-11-30Merge branch 'for_linus' of git://github.com/at91linux/linux-2.6-at91Linus Torvalds
* 'for_linus' of git://github.com/at91linux/linux-2.6-at91: at91/board-yl-9200: fix typo in video support atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer' at91/picotux200: remove commenting usb device and dataflash support at91: rename rm9200ek and rm9200dk board file name at91rm9200ek: fix warning: 'ek_mmc_data' defined but not used at91rm9200dk: fix warning: 'dk_mmc_data' defined but not used at91: Convert remaining boards to new-style UART initialization at91: merge all at91rm9200 defconfig in one single file
2010-11-30exec: copy-and-paste the fixes into compat_do_execve() pathsOleg Nesterov
Note: this patch targets 2.6.37 and tries to be as simple as possible. That is why it adds more copy-and-paste horror into fs/compat.c and uglifies fs/exec.c, this will be cleanuped later. compat_copy_strings() plays with bprm->vma/mm directly and thus has two problems: it lacks the RLIMIT_STACK check and argv/envp memory is not visible to oom killer. Export acct_arg_size() and get_arg_page(), change compat_copy_strings() to use get_arg_page(), change compat_do_execve() to do acct_arg_size(0) as do_execve() does. Add the fatal_signal_pending/cond_resched checks into compat_count() and compat_copy_strings(), this matches the code in fs/exec.c and certainly makes sense. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-30exec: make argv/envp memory visible to oom-killerOleg Nesterov
Brad Spengler published a local memory-allocation DoS that evades the OOM-killer (though not the virtual memory RLIMIT): http://www.grsecurity.net/~spender/64bit_dos.c execve()->copy_strings() can allocate a lot of memory, but this is not visible to oom-killer, nobody can see the nascent bprm->mm and take it into account. With this patch get_arg_page() increments current's MM_ANONPAGES counter every time we allocate the new page for argv/envp. When do_execve() succeds or fails, we change this counter back. Technically this is not 100% correct, we can't know if the new page is swapped out and turn MM_ANONPAGES into MM_SWAPENTS, but I don't think this really matters and everything becomes correct once exec changes ->mm or fails. Reported-by: Brad Spengler <spender@grsecurity.net> Reviewed-and-discussed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-30serial: mfd: adjust the baud rate settingFeng Tang
Previous baud rate setting code only has been tested with 3.5M/9600/ 115200/230400/460800 bps, and recently we got a 3M bps device to test, which needs to modify current MUL register setting, and with this patch 2.5M/2M/1.5M/1M/0.5M should also work as they just use a MUL value scale down from 3M's. Also got some reference register setting from silicon guys for different baud rates, which tries to keep the pre-scalar register value to 16. Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30Merge branch 'for-greg' of git://gitorious.org/usb/usb into workGreg Kroah-Hartman
2010-11-30Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into work
2010-11-30sparc: Delete prom_*getchar().David S. Miller
Completely unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-30sparc: Pass buffer pointer all the way down to prom_{get,put}char().David S. Miller
This gets us closer to being able to eliminate the use of dynamic and stack based buffers, so that we can adhere to the "no buffer addresses above 4GB" rule for PROM calls. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-30cifs: fix parsing of hostname in dfs referralsJeff Layton
The DFS referral parsing code does a memchr() call to find the '\\' delimiter that separates the hostname in the referral UNC from the sharename. It then uses that value to set the length of the hostname via pointer subtraction. Instead of subtracting the start of the hostname however, it subtracts the start of the UNC, which causes the code to pass in a hostname length that is 2 bytes too long. Regression introduced in commit 1a4240f4. Reported-and-Tested-by: Robbert Kouprie <robbert@exx.nl> Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Wang Lei <wang840925@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: stable@kernel.org Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-30ath9k: Fix STA disconnect issue due to received MIC failed bcast framesSenthil Balasubramanian
AR_RxKeyIdxValid will not be set for bcast/mcast frames and so relying this status for MIC failed frames is buggy. Due to this, MIC failure events for broadcast frames are not sent to supplicant resulted in AP disconnecting the STA. Able to pass Wifi Test case 5.2.18 with this fix. Cc: Stable <stable@kernel.org> (2.6.36+) Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30mac80211: Fix STA disconnect due to MIC failureSenthil Balasubramanian
Th commit titled "mac80211: clean up rx handling wrt. found_sta" removed found_sta variable which caused a MIC failure event to be reported twice for a single failure to supplicant resulted in STA disconnect. This should fix WPA specific countermeasures WiFi test case (5.2.17) issues with mac80211 based drivers which report MIC failure events in rx status. Cc: Stable <stable@kernel.org> (2.6.37) Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30USB: fix autosuspend bug in usb-serialAlan Stern
This patch (as1437) fixes a bug in the usb-serial autosuspend handling. Since the usb-serial core now has autosuspend support, it must set the .supports_autosuspend member in every serial driver it registers. Otherwise the usb_autopm_get_interface() call won't work. This fixes Bugzilla #23012. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: stable@kernel.org Reported-by: Kevin Smith <thirdwiggin@gmail.com> Reported-and-tested-by: Simon Gerber <gesimu@gmail.com> Reported-and-tested-by: Matteo Croce <matteo@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30USB: ehci: disable LPM and PPCD for nVidia MCP89 chipsBrian J. Tarricone
Tested on MacBookAir3,1. Without this, we get EPROTO errors when fetching device config descriptors. Signed-off-by: Brian Tarricone <brian@tarricone.org> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Tested-by: Edgar Hucek <gimli@dark-green.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID addedJacques Viviers
Add the PID for the Vardaan Enterprises VEUSB422R3 USB to RS422/485 converter. It uses the same chip as the FTDI_8U232AM_PID 0x6001. This should also work with the stable branches for: 2.6.31, 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36 Signed-off-by: Jacques Viviers <jacques.viviers@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30USB: yurex: add .llseek fop to file_operationsTomoki Sekiyama
Default llseek operation behavior was changed by the patch named "vfs: make no_llseek the default" after the yurex driver had been merged, so the llseek to yurex is now ignored. This patch add llseek fop with default_llseek to yurex driver to catch up to the change. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30USB: ftdi_sio: Add ID for RT Systems USB-29B radio cableMichael Stuermer
Another variant of the RT Systems programming cable for ham radios. Signed-off-by: Michael Stuermer <ms@mallorn.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30mac80211: ignore non-bcast mcast deauth/disassoc franesChristian Lamparter
This patch fixes an curious issue due to insufficient rx frame filtering. Saqeb Akhter reported frequent disconnects while streaming videos over samba: <http://marc.info/?m=128600031109136> > [ 1166.512087] wlan1: deauthenticated from 30:46:9a:10:49:f7 (Reason: 7) > [ 1526.059997] wlan1: deauthenticated from 30:46:9a:10:49:f7 (Reason: 7) > [ 2125.324356] wlan1: deauthenticated from 30:46:9a:10:49:f7 (Reason: 7) > [...] The reason is that the device generates frames with slightly bogus SA/TA addresses. e.g.: [ 2314.402316] Ignore 9f:1f:31:f8:64:ff [ 2314.402321] Ignore 9f:1f:31:f8:64:ff [ 2352.453804] Ignore 0d:1f:31:f8:64:ff [ 2352.453808] Ignore 0d:1f:31:f8:64:ff ^^ the group-address flag is set! (the correct SA/TA would be: 00:1f:31:f8:64:ff) Since the AP does not know from where the frames come, it generates a DEAUTH response for the (invalid) mcast address. This mcast deauth frame then passes through all filters and tricks the stack into thinking that the AP brutally kicked us! This patch fixes the problem by simply ignoring non-broadcast, group-addressed deauth/disassoc frames. Cc: Jouni Malinen <j@w1.fi> Cc: Johannes Berg <johannes@sipsolutions.net> Reported-by: Saqeb Akhter <saqeb.akhter@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30orinoco: abort scan on interface downDavid Kilroy
This fixes the problem causing the following trace: ------------[ cut here ]------------ WARNING: at linux-2.6.34/net/wireless/core.c:633 wdev_cleanup_work+0xb7/0xe0 [cfg80211]() Hardware name: Latitude C840 Pid: 707, comm: cfg80211 Not tainted 2.6.34.7-0.5-desktop #1 Call Trace: [<c02065c3>] try_stack_unwind+0x173/0x190 [<c02051cf>] dump_trace+0x3f/0xe0 [<c020662b>] show_trace_log_lvl+0x4b/0x60 [<c0206658>] show_trace+0x18/0x20 [<c064e0b3>] dump_stack+0x6d/0x72 [<c02443ae>] warn_slowpath_common+0x6e/0xb0 [<c0244403>] warn_slowpath_null+0x13/0x20 [<e2db5497>] wdev_cleanup_work+0xb7/0xe0 [cfg80211] [<c025cfa9>] run_workqueue+0x79/0x170 [<c025d123>] worker_thread+0x83/0xe0 [<c025fef4>] kthread+0x74/0x80 [<c0203826>] kernel_thread_helper+0x6/0x10 ---[ end trace 3f0348b3b0c6f4ff ]--- Reported by: Giacomo Comes <comes@naic.edu> Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30NFS: Fix a readdirplus bugTrond Myklebust
When comparing filehandles in the helper nfs_same_file(), we should not be using 'strncmp()': filehandles are not null terminated strings. Instead, we should just use the existing helper nfs_compare_fh(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-30tracing: Fix panic when lseek() called on "trace" opened for writingSlava Pestov
The file_ops struct for the "trace" special file defined llseek as seq_lseek(). However, if the file was opened for writing only, seq_open() was not called, and the seek would dereference a null pointer, file->private_data. This patch introduces a new wrapper for seq_lseek() which checks if the file descriptor is opened for reading first. If not, it does nothing. Cc: <stable@kernel.org> Signed-off-by: Slava Pestov <slavapestov@google.com> LKML-Reference: <1290640396-24179-1-git-send-email-slavapestov@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-30perf header: Don't assume there's no attr info if no sample ids is providedFranck Bui-Huu
This primarily fixes perf-report, which didn't report the correct type of event if perf-record was called to record one event different from 'cycles': $ perf record -e instructions true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.007 MB perf.data (~295 samples) ] $ perf report | head -n1 # Events: 7 cycles LPU-Reference: <m3mxor6nex.fsf@gmail.com> Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
2010-11-30perf symbols: Figure out start address of kernel map from kallsymsMing Lei
On ARM, module symbol start address is ahead of kernel symbol start address, so we can't suppose that the start address of kernel map always is zero, otherwise may cause incorrect .start and .end of kernel map (caused by fixup) when there are modules loaded, then map_groups__find may return incorrect map for symbol query. This patch always figures out the start address of kernel map from /proc/kallsyms if the file is available, so fix the issues on ARM for module loaded case. This patch fixes the following issues on ARM when modules are loaded: - vmlinux symbol can't be found by kallsyms maps doing 'perf test' - module symbols are parsed mistakenlly when doing 'perf top'/'perf report' Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20101125192725.62d31b42@tom-lei> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-11-30perf symbols: Fix kallsyms kernel/module map splittingArnaldo Carvalho de Melo
On ARM, module addresss space is ahead of kernel space, so the module symbols are handled before kernel symbol in dso__split_kallsyms, then was causing one map to be created for each kernel symbol. Reported-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20101124144540.GB15875@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-11-30at91/board-yl-9200: fix typo in video supportJean-Christophe PLAGNIOL-VILLARD
for the epson frambuffer support it's CONFIG_FB_S1D13XXX not CONFIG_FB_S1D135XX Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'Jean-Christophe PLAGNIOL-VILLARD
passing argument 2 of 'dma_map_single' discards qualifiers from pointer target type Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30at91/picotux200: remove commenting usb device and dataflash supportJean-Christophe PLAGNIOL-VILLARD
as based on http://www.picotux.com/pt200/picotux200.pdf these board does not have such I/O Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30at91: rename rm9200ek and rm9200dk board file nameJean-Christophe PLAGNIOL-VILLARD
to be a few more concistant with the other boards as ek is for evaluation kit and dk for development kit Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91rm9200ek: fix warning: 'ek_mmc_data' defined but not usedJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91rm9200dk: fix warning: 'dk_mmc_data' defined but not usedJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91: Convert remaining boards to new-style UART initializationJean-Christophe PLAGNIOL-VILLARD
Convert the following AT91RM9200-based boards to the new-style UART initialization: - Ajeco 1ARM Single Board Computer - Sperry-Sun KAFA board - picotux 200 Remove the deprecated at91_init_serial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30fuse: verify ioctl retriesMiklos Szeredi
Verify that the total length of the iovec returned in FUSE_IOCTL_RETRY doesn't overflow iov_length(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Tejun Heo <tj@kernel.org> CC: <stable@kernel.org> [2.6.31+]
2010-11-30fuse: fix ioctl when server is 32bitMiklos Szeredi
If a 32bit CUSE server is run on 64bit this results in EIO being returned to the caller. The reason is that FUSE_IOCTL_RETRY reply was defined to use 'struct iovec', which is different on 32bit and 64bit archs. Work around this by looking at the size of the reply to determine which struct was used. This is only needed if CONFIG_COMPAT is defined. A more permanent fix for the interface will be to use the same struct on both 32bit and 64bit. Reported-by: "ccmail111" <ccmail111@yahoo.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Tejun Heo <tj@kernel.org> CC: <stable@kernel.org> [2.6.31+]
2010-11-30regulator: fix kernel-doc for set_consumer_device_supplyRandy Dunlap
Fix kernel-doc warning for set_consumer_device_supply(): Warning(drivers/regulator/core.c:912): missing initial short description on line: * set_consumer_device_supply: Bind a regulator to a symbolic supply Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: enable supply regulator only when use count is zeroBengt Jonsson
Supply regulators are disabled only when the last reference count is removed on the child regulator (the use count goes from 1 to 0). This patch changes the behaviour of enable so the supply regulator is enabled only when the use count of the child regulator goes from 0 to 1. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: twl-regulator - fix twlreg_set_modeAxel Lin
The Singular Message is 16 bits: DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] Current implementation return immedially after sucessfuly write MSB part. To properly set mode, we need to write the complete message ( MSB and LSB ). In twl.h, now we have defines for PM Master module register offsets, use it instead of hard coded 0x15/0x16. Use "message & 0xff" to ensure we send correct value for LSB. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Lesly Arackal Manuel <leslyam@ti.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: lock supply in regulator enableMattias Wallin
This patch add locks around regulator supply enable. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Return proper error for regulator_register()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Ensure enough delay time for enabling regulatorAxel Lin
Integer division will truncate the result, this patch ensures we have enough delay time for enabling regulator. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Remove a redundant device_remove_file call in create_regulatorAxel Lin
We already have device_remove_file() in error path, no need to call it before goto link_name_err. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Staticise mc13783_powermisc_rmw()Mark Brown
It is not used outside this driver so no need to make the symbol global. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: regulator disable supply fixMattias Wallin
This patch fixes a disable failure when regulator supply is used. A while loop in regulator disable checks for supply pointer != NULL but the pointer is not always updated, resulting in the while loop running too many times causing a disable failure. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selectedDave Martin
Currently, the kprobes implementation for ARM only supports the ARM instruction set, so it only works if CONFIG_THUMB2_KERNEL is not enabled. Until kprobes is updated to work with Thumb-2, turning it on will cause horrible things to happen, so this patch disables it for now. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for ↵Dave Martin
CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6507/1: RealView: Correct data alignment in headsmp.S for ↵Dave Martin
CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for ↵Dave Martin
Thumb-2. The 32-bit conditional branches in Thumb-2 have a shorter range (+/-512K) than their ARM counterparts (+/-32MB). The linker does not currently generate trampolines to extend the range of these Thumb-2 conditional branches, resulting in link errors when vmlinux is sufficiently large, e.g.: head.o:(.text+0x464): relocation truncated to fit: R_ARM_THM_JUMP19 This patch forces the longer-range, unconditional branch encoding by use of an explicit IT instruction. The resulting branches are triggered on the same conditions as before. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for ↵Dave Martin
CONFIG_THUMB2_KERNEL The code which makes up the zImage header intends to leave a 32-byte gap followed by a branch to the real entry point, a magic number, and a word containing the absolute entry point address. This gets messed up with with CONFIG_THUMB2_KERNEL, because the size of the initial padding NOPs changes. Instead, the header can be made fully compatible by restoring it to ARM. In the Thumb-2 case, we can replace the initial NOPs with a sequence which switches to Thumb and jumps to the real entry point. As a consequence, the zImage entry point is now always ARM, so no special magic is needed any more for the uImage rules in the Thumb-2 case. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.SDave Martin
Some instruction operand combinations are used here which are nor permitted in Thumb-2. In particular, most uses of pc as an operand are disallowed in Thumb-2, and deprecated in ARM from ARMv7 onwards. The modified code introduced by this patch should be compatible with all architecture versions >= v3, with or without CONFIG_THUMB2_KERNEL. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in ↵Dave Martin
mm/proc-v7.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. In this specific case, we can achieve the desired alignment by forcing a 32-bit branch instruction using the W() macro, since the assembler location counter is already 32-bit aligned in this case. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-15 01:32:18 +0000