summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-28arm64: Kconfig: remove SMP dependence for NUMAKefeng Wang
The arm64 forces CONFIG_SMP=y with commit 4b3dc9679cf7, no need to add SMP dependence for NUMA. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-28ath10k: fix error return code in ahbWei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in function ath10k_ahb_probe() or ath10k_ahb_resource_init(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28staging: greybus: Add backup maintainer for Greybus audioMark Greer
Add Mark Greer as the backup maintainer for the Greybus Audio Protocol driver. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: rtl8192e: fixed use a blank line after function/struct/union/enum ↵Darryl T. Agostinelli
declarations fixed use a blank line after function/struct/union/enum declarations Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: rtl8192e: fixed statements should start on a tabstopDarryl T. Agostinelli
fixed statements should start on a tabstop Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: rtl8192e: fixed block comments use * on subsequent linesDarryl T. Agostinelli
fixed block comments use * on subsequent lines Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: rtl8712: Change _LED_STATE enum in rtl871x driver to avoid ↵Zach Brown
conflicts with LED namespace Adding led support for phy causes namespace conflicts for some phy drivers. The rtl871 driver declared an enum for representing LED states. The enum contains constant LED_OFF which conflicted with declaration found in linux/leds.h. LED_OFF changed to LED_STATE_OFF In order to avoid a possible future collision LED_ON was changed to LED_STATE_ON as well. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: vt6656: Remove unused variable 'rx_sts'Martin Alonso
As suggested by Joe Perches, rx_sts is not used anywhere and could be removed. Signed-off-by: Martin Alonso <martin.alonso@zoho.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: ks7010: declare private functions staticSergio Paracuellos
Private functions in ks7010_sdio.c can be declared static. Fixes sparse warnings 'was not declared. Should it be static?'. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: wlan-ng: fix line style warnings in p80211netdev.hSergio Paracuellos
This patch fixes the following checkpatch.pl warning in p80211netdev.h: WARNING: line over 80 characters Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: wlan-ng: avoid new typedef: p80211_frmrx_tSergio Paracuellos
This patch fixes the following checkpatch.pl warning in p80211netdev.h: WARNING: do not add new typedefs It applies for typedef p80211_frmrx_t Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: wlan-ng: avoid new typedef: netdevice_tSergio Paracuellos
This patch fixes the following checkpatch.pl warning in p80211netdev.h: WARNING: do not add new typedefs It applies for typedef netdevice_t Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: unisys: visorbus: fix typos with client_bus_info /sys entryTim Sell
Example corrected output: $ pwd /sys/bus/visorbus/devices/visorbus1 $ cat client_bus_info Client device / client driver info for s-Par Console partition (vbus #1): chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+ clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+ [2]keyboard visorinput kernel ver. 4.8.0-rc6-ARCH+ [3]mouse visorinput kernel ver. 4.8.0-rc6-ARCH+ $ cat ../visorbus2/client_bus_info Client device / client driver info for s-Par IOVM partition (vbus #2): chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+ clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+ [0]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+ [1]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+ [2]sparvhba visorhba kernel ver. 4.8.0-rc6-ARCH+ Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: unisys: visorbus: fix vbus info generated for s-Par livedumpsTim Sell
Previously, the lines describing devices controlled by the visorinput, visornic, and visorhba drivers (keyboard, mouse, ultravnic, sparvhba) would be missing from the vbus channel header. This is important info that is collected as part of s-Par livedumps, and can be examined via /sys/bus/visorbus/devices/visorbus<n>/client_bus_info, e.g.: $ pwd /sys/bus/visorbus/devices $ cat visorbus1/client_bus_info Client device / client driver info for s-Par Console eartition (vbus #4294967295): chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+ clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+ -> [2]keyboard visorinput kernel ver. 4.8.0-rc6-ARCH+ -> [3]mouse visorinput kernel ver. 4.8.0-rc6-ARCH+ $ cat visorbus2/client_bus_info Client device / client driver info for s-Par IOVM eartition (vbus #4294967295): chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+ clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+ -> [0]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+ -> [1]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+ -> [2]sparvhba visorhba kernel ver. 4.8.0-rc6-ARCH+ Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: unisys: visorbus: fix sloppy unsigned/signed int conversionsTim Sell
Several implicit unsigned --> signed int conversions were corrected. No runtime effects were observed here, nevertheless implicit conversions between integral types can lead to unexpected behavior. Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28net/sched: pkt_cls: change tc actions order to be as the user setsHadar Hen Zion
Currently the created tc actions list is reversed against the order set by the user. Change the actions list order to be the same as was set by the user. This patch doesn't affect dump actions behavior. For dumping, action->order parameter is used so the list order doesn't matter. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sh_eth: add R8A7743/5 supportSergei Shtylyov
Add support for the first two members of the Renesas RZ/G family, RZ/G1M/E (also known as R8A7743/5). The Ether core is the same as in the R-Car gen2 SoCs, so will share the code/data with them... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28Merge branch 'fib-offload-notifications'David S. Miller
Jiri Pirko says: ==================== fib offload: switch to notifier The goal of this patchset is to allow driver to propagate all prefixes configured in kernel down HW. This is necessary for routing to work as expected. If we don't do that HW might forward prefixes known to kernel incorrectly. Take an example when default route is set in switch HW and there is an IP address set on a management (non-switch) port. Currently, only FIB entries related to the switch port netdev are offloaded using switchdev ops. This model is not extendable so the first patch introduces a replacement: notifier to propagate FIB entry additions and removals to whoever is interested. The second patch introduces couple of helpers to deal with RTNH_F_OFFLOAD flags. Currently it is set in switchdev core. There the assumption is that only one offload device exists. But for FIB notifier, we assume multiple offload devices. So the patch introduces a per FIB entry reference counter and helpers use it in order to achieve this: 0 means RTNH_F_OFFLOAD is not set, no device offloads this entry n means RTNH_F_OFFLOAD is set and the entry is offloaded by n devices Patches 3 and 4 convert mlxsw and rocker to adopt this new way, registering one notifier block for each asic instance. Both of these patches also implement internal "abort" mechanism. Using switchdev ops, "abort" is called by switchdev core whenever there is an error during FIB entry add offload. This leads to removal of all offloaded entries on system by fib_trie code. Now the new notifier assumes the driver takes care of the abort action. Here's why: 1) The fact that one HW cannot offload an entry does not mean that the others can't do it. So let only one entity to abort and leave the rest to work happily. 2) The driver knows what to in order to properly abort. For example, currently abort is broken for mlxsw, as for Spectrum there is a need to set 0.0.0.0/0 trap in RALUE register. The fifth patch removes the old, no longer used FIB offload infrastructure. The last patch reflects the changes into switchdev documentation file. --- v2->v3: -patch 3/6 -fixed offload inc/dec to be done in fib4_entry_init/fini and only in case !trap as suggested by Ido v1->v2: -patch 3/6: -fixed lpm tree setup and binding for abort and pointed out by Ido -do nexthop checks as suggested by Ido -fix use after free during abort -patch 6/6: -fixed texts as suggested by Ido ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28doc: update switchdev L3 sectionJiri Pirko
This is to reflect the change of FIB offload infrastructure from switchdev objects to FIB notifier. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28switchdev: remove FIB offload infrastructureJiri Pirko
Since this is now taken care of by FIB notifier, remove the code, with all unused dependencies. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28rocker: use FIB notifications instead of switchdev callsJiri Pirko
Until now, in order to offload a FIB entry to HW we use switchdev op. Use the newly introduced FIB notifier infrasturucture to process FIB entries to offload the in HW. Abort mechanism is now handled within the rocker driver. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28mlxsw: spectrum_router: Use FIB notifications instead of switchdev callsJiri Pirko
Until now, in order to offload a FIB entry to HW we use switchdev op. However that has limits. Mainly in case we need to make the HW aware of all route prefixes configured in kernel. HW needs to know those in order to properly trap appropriate packets and pass the to kernel to do the forwarding. Abort mechanism is now handled within the mlxsw driver. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28fib: introduce FIB info offload flag helpersJiri Pirko
These helpers are to be used in case someone offloads the FIB entry. The result is that if the entry is offloaded to at least one device, the offload flag is set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28fib: introduce FIB notification infrastructureJiri Pirko
This allows to pass information about added/deleted FIB entries/rules to whoever is interested. This is done in a very similar way as devinet notifies address additions/removals. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28s390/dasd: add missing \n to end of dev_err messagesColin Ian King
Trival fix, dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-09-28net/sched: cls_flower: Use a proper mask value for enc key id parameterHadar Hen Zion
The current code use the encapsulation key id value as the mask of that parameter which is wrong. Fix that by using a full mask. Fixes: bc3103f1ed40 ('net/sched: cls_flower: Classify packet in ip tunnels') Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Amir Vadai <amir@vadai.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28Revert "drivers/tty: Explicitly pass current to show_stack"Greg Kroah-Hartman
This reverts commit 9f12cea96f47f98d612a0a0b84f950a0163731bf. Mark writes: Unfortunately, this patch will result in erroneous stack traces on some architectures. Sorry about this; I should have verified this more thoroughly before sending the series out. Please drop the patch at your earliest convenience. Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28Fixes: 3d44a78f0d8b ("staging: rtl8712: Remove unnecessary 'else'")Matthew Kilgore
An "unnecessary" 'else' was removed due to complains from checkpatch.pl as it is preceded by a 'return', however the 'else' branch is necessary as an earlier branch of the 'if' falls through. By removing the 'else', that route now hits the 'break' and the 'while' loop exits prematurely. This commit reverts that change and puts the original 'else' back in place. Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27Merge remote-tracking branch 'mkp-scsi/4.8/scsi-fixes' into fixesJames Bottomley
2016-09-28drm/udl: fix line iterator in damage handlingDavid Herrmann
The udl damage handler is supposed to render 'height' lines, but its iterator has an obvious typo that makes it miss most lines if the rectangle does not cover 0/0. Fix the damage handler to correctly render all lines. This is a fallout from: commit e375882406d0cc24030746638592004755ed4ae0 Author: Noralf Trønnes <noralf@tronnes.org> Date: Thu Apr 28 17:18:37 2016 +0200 drm/udl: Use drm_fb_helper deferred_io support Tested-by: poma <poma@gmail.com> Cc: stable@vger.kernel.org # 4.7+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-09-27Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2016-09-27 This series contains updates to igb and igbvf. Wei Yongjun makes a function static to shut up sparse. Todd bumps the igb and igbvf version, which is long overdue. Jake fixes an issue where the PPS SYS_WRAP interrupt was not re-enabled after a reset, which resulted in disabling of the PPS signaling. v2: dropped patch 5 of the original series, since the PCI quirk patch needs to be reworked by Alex and Sasha to address issues that Bjorn Helgaas and Alex Williamson brought up. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27lib: clean up put_cpu_var usageShaohua Li
put_cpu_var takes the percpu data, not the data returned from get_cpu_var. This doesn't change the behavior. Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27bpf: clean up put_cpu_var usageShaohua Li
put_cpu_var takes the percpu data, not the data returned from get_cpu_var. This doesn't change the behavior. Cc: Tejun Heo <tj@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27igb: restore PPS signal on igb_ptp_resetJacob Keller
When a reset occurs, the PPS SYS_WRAP interrupt was not re-enabled which resulted in disabling of the PPS signaling. Fix this by recording when the interrupt is on and ensuring that we re-enable it every time we reset. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-27igb: bump version to igb-5.4.0Todd Fujinaka
Bump igb version to match other igb drivers. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-27igbvf: bump version to igbvf-2.4.0Todd Fujinaka
Bump version to match other igbvf drivers. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-27igb: fix non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/net/ethernet/intel/igb/igb_ethtool.c:2707:5: warning: symbol 'igb_rxnfc_write_vlan_prio_filter' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-28Merge branch 'linux-4.8' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
nouveau: couple of fixes. * 'linux-4.8' of git://github.com/skeggsb/linux: drm/nouveau: Revert "bus: remove cpu_coherent flag" drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion
2016-09-28Merge branch 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes two amd fixes. * 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/si/dpm: add workaround for for Jet parts drm/amdgpu: disable CRTCs before teardown
2016-09-27Merge branch 'for-4.8-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Three late fixes for cgroup: Two cpuset ones, one trivial and the other pretty obscure, and a cgroup core fix for a bug which impacts cgroup v2 namespace users" * 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix invalid controller enable rejections with cgroup namespace cpuset: fix non static symbol warning cpuset: handle race between CPU hotplug and cpuset_hotplug_work
2016-09-27perf record: Fix documentation 'event_sources' -> 'event_source'Adrian Hunter
Change '/sys/bus/event_sources' to the correct path which is '/sys/bus/event_source'. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-27ASoC: da7219: fix inappropriate condition statementTakashi Sakamoto
Sparse reports a below warning. sound/soc/codecs/da7219.c:804:57: warning: dubious: x & !y The line includes a condition statement; '(a < b) & !c'. Practically, the evaluated value of this statement equals to the value of '(a < b) && !c'. Although, it's not an usual way to use bitwise operations as logical operations to several conditions. This commit fixes the bug. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-27ASoC: tlv320aic31xx: do not declare support for mono DAINikita Yushchenko
This hardware supports only 2-channel DAI, even mono ADC digital output has two channels with the same data. Having min_channels=1 results in broken playback of mono files in setups where CPU DAI supports mono. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-27ASoC: stac9766: fix wrong usage of DECLARE_TLV_DB_LINEAR()Takashi Sakamoto
As long as reading datasheet of STAC9766/9767, this driver includes wrong usage of DECLARE_TLV_DB_LINEAR(). In "8.1.2. Master Volume Registers", attenuation of lineout volumes is represented in 5 bits by -1.5 dB/step from 0 to -46.5 dB. Thus, 'master_tlv' should be dB step representation. In "8.1.14. Record Gain", gain of volumes is represented in 4 bits by 1.5 dB/step from 0 to 22.5 dB. Thus, 'record_tlv' should be dB step representation. In "8.1.5. PC BEEP Volume", attenuation of volume is represented in 4 bits by -3 dB/step from 0 to 45 dB. Thus, 'beep_tlv' should be dB step representation. In "8.1.7. Stereo or Mic Volume" and so on, gain of volumes is represented in 5 bits by -1.5 dB from 12 to -34.5 dB. Thus, 'mix_tlv' should be dB step representation. Totally, current implementation includes misuse of TLV-related macro. This commit replaces usage of DECLARE_TLV_DB_LINEAR() with SNDRV_CTL_TLVD_DECLARE_DB_SCALE(), to give proper information to applications in user land. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-27drm/radeon/si/dpm: add workaround for for Jet partsAlex Deucher
Add clock quirks for Jet parts. Reviewed-by: Sonny Jiang <sonny.jiang@amd.com> Tested-by: Sonny Jiang <sonny.jiang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-27drm/amdgpu: disable CRTCs before teardownGrazvydas Ignotas
Some code called by drm_crtc_force_disable_all() wants to wait for all fences, so only do fence teardown after CRTCs are disabled. Fixes: 84b89bdcedf8 ("drm/amdgpu: Turn off CRTCs on driver unload") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-27ASoC: wm8991: remove unused variableTakashi Sakamoto
This driver has some unused variables. They should be removed. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-27ASoC: wm8991: fix wrong usage of DECLARE_TLV_DB_LINEAR()Takashi Sakamoto
As long as reading datasheet of WM8991, this driver includes wrong usage of DECLARE_TLV_DB_LINEAR(). In "Table 6 Input PGA Volume Range", volume is represented in 5 bits by 1.5 dB/step between -16.5/30.0 dB. Thus, 'in_pga_tlv' should be dB step representation. In "Table 34 LOMIX and ROMIX Volume Range", volume is represented in three bits by -3 dB/step from 0 to -21 dB. Thus, 'out_mix_tlv' should be dB step represenation. In "Table 36 LOPGA, ROPGA, LOUT, ROUT and SPKVOL Volume Range", volume is represented in 7 bits by 1 dB/step from -73 to 6 dB, including mute. Thus, 'out_pga_tlv' should be dB step representation. In "Table 26 Digital Volume Range", volume is represented in 8 bits by 3/8 dB/step from -71.625 to 0 dB. Thus, 'out_dac_tlv' should be dB step representation. In "Table 16 ADC Digital Volume Range", volume is represented in 8 bits by 3/8 dB/step from -71.625 to 17.625 dB. Thus, 'in_adc_tlv' should be dB step representation. In "Table 23 Digital Sidetone Volume", volume is represented in 5 bits by 3 dB/step from -36 to 0 dB. Thus, 'out_sidetone_tlv' should be dB step representation. In "Table 12 Left Input Mixer Volume Control", volume is represented in 3 bits by 3 dB/step from -12 to 6 dB Totally, current implementation includes misuse of TLV-related macro. This commit replaces usage of DECLARE_TLV_DB_LINEAR() with proper macros, to give proper information to applications in user land. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-27ext2: Unmap metadata when zeroing blocksJan Kara
When zeroing blocks for DAX allocations, we also have to unmap aliases in the block device mappings. Otherwise writeback can overwrite zeros with stale data from block device page cache. Signed-off-by: Jan Kara <jack@suse.cz>
2016-09-27ASOC: tpa6130a2: add static qualifier for file local symbolsTakashi Sakamoto
Sparse reports a below warning. tpa6130a2.c:193:33: warning: symbol 'tpa6130a2_component_driver' was not declared. Should it be static? The symbol is just used inner the file. Forthermore, it's constant. Thus, it's better to add static and const qualifier. This commit adds it. Fixes: cb7e62256e99 (ASoC: tpa6130a2: Register component) Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 12:58:42 +0000