summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-31dmaengine i.MX dma: check sg entries for valid addresses and lengthsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine i.MX dma: set maximum segment size for our deviceSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine i.MX SDMA: reserve channel 0 by not registering itSascha Hauer
We need channel 0 of the sdma engine for internal purposes. We accomplished this by calling dma_request_channel() in the probe function. This does not work when multiple dma engines are present which is the case when IPU support for i.MX31/35 is compiled in. So instead of registering channel 0 and reserving it afterwards simply do not register it in the first place. With this the dmaengine channel counting does not match sdma channel counting anymore, so we have to use sdma channel counting in the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine i.MX SDMA: initialize dma capabilities outside channel loopSascha Hauer
The capabilities are device specific fields, not channel specific fields. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine i.MX SDMA: do not initialize chan_id fieldSascha Hauer
This is bogus as the dmaengine core will overwrite this field. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine i.MX sdma: check sg entries for valid addresses and lengthsSascha Hauer
This patch lets sdma_prep_slave_sg fail if the entries of an sg list do not start on multiples of the word size or if the lengths are not multiple of the word size. Also, catch the previously unhandled DMA_SLAVE_BUSWIDTH_8_BYTES and DMA_SLAVE_BUSWIDTH_UNDEFINED cases. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine i.MX sdma: set maximum segment size for our deviceSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31Merge branch 'topic/hda' into fix/hdaTakashi Iwai
2011-01-31ALSA: oxygen: fix output routing on Xonar DGClemens Ladisch
This card uses separate I2S outputs for the front speakers and headphones, and reverses the order of the three speaker outputs. To work around this, add a model-specific callback to adjust the controller's playback routing. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-31ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+Russell King
Ensure that the ISA/PCI IO space accessors are properly ordered on ARMv6+ architectures. These should always be ordered with respect to all other accesses. This also fixes __iormb() and __iowmb() not being visible to ioread/ iowrite if a platform defines its own MMIO accessors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: initrd: disable initrd if passed address overlaps reserved regionRussell King
Disable the initrd if the passed address already overlaps the reserved region. This avoids oopses on Netwinders when NeTTrom tells the kernel that an initrd is located at mem+4MB, but this overlaps the BSS, resulting in the kernels in-use BSS being freed. This should be applied to v2.6.37-stable. Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: footbridge: fix debug macrosRussell King
0ea1293 (arm: return both physical and virtual addresses from addruart) changed the way the 'addruart' worked, making it return both the virt and phys addresses. Unfortunately, for footbridge, these were reversed. Fix that. Tested on Netwinder. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: mmci: round down the bytes transferred on errorRussell King
We should not report incomplete blocks on error. Return the number of bytes successfully transferred, rounded down to the nearest block. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: mmci: complete the transaction on errorRussell King
When we encounter an error, make sure we complete the transaction otherwise we'll leave the request dangling. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31[S390] reset default for CONFIG_CHSC_SCHSebastian Ott
6f9a3c33 "[S390] cleanup s390 Kconfig" accidentally changed the default for CONFIG_CHSC_SCH. Reset it to m. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31[S390] qdio: prevent compile warning under CONFIG_32BITJan Glauber
Prevent the following compiler warning if compiling a 31 bit kernel: drivers/s390/cio/qdio_main.c: In function ‘get_outbound_buffer_frontier’: drivers/s390/cio/qdio_main.c:646:16: warning: ‘state’ may be used uninitialized in this function CC lib/radix-tree.o CC drivers/s390/scsi/zfcp_cfdc.o drivers/s390/cio/qdio_main.c: In function ‘qdio_inbound_q_moved’: drivers/s390/cio/qdio_main.c:479:16: warning: ‘state’ may be used uninitialized in this function drivers/s390/cio/qdio_main.c:479:16: note: ‘state’ was declared here Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31[S390] use asm-generic/cacheflush.hAkinobu Mita
The implementation of the cache flushing interfaces on the s390 is identical with the default implementation in asm-generic. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31[S390] tlb: fix build error caused by THPHeiko Carstens
Fix this build error with !CONFIG_SWAP caused by tranparent huge pages support: In file included from mm/pgtable-generic.c:9:0: /linux-2.6/arch/s390/include/asm/tlb.h: In function 'tlb_remove_page': /linux-2.6/arch/s390/include/asm/tlb.h:92:2: error: implicit declaration of function 'page_cache_release' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31[S390] missing sacf in uaccessMartin Schwidefsky
The uaccess functions copy_in_user_std and clear_user_std fail to switch back from secondary space mode to primary space mode with sacf in case of an unresolvable page fault. We need to make sure that the switch back to primary mode is done in all cases, otherwise the code following the uaccess inline assembly will crash. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31[S390] pgtable_list corruptionMartin Schwidefsky
After page_table_free_rcu removed a page from the pgtable_list page_table_free better not add it again. Otherwise a page_table_alloc can reuse a page table fragment that is still in the rcu process. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31[S390] dasd: prevent panic with unresumed devicesStefan Haberland
If a device is not resumed correctly the system crashes when this device is set offline. This may happen if it gets disconnected during suspend. Check if the device is already removed from alias handling and skip these steps to prevent the kernel panic. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31sound: silent echo'ed messages in MakefileAmerigo Wang
Silent these echo's, please. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-31dt: Move device tree documentation out of powerpc directoryGrant Likely
The device tree is used by more than just PowerPC. Make the documentation directory available to all. v2: reorganized files while moving to create arch and driver specific directories. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2011-01-30bnx2x: Update bnx2x version to 1.62.00-5Yaniv Rosner
Update bnx2x version to 1.62.00-5 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix potential link loss in multi-function modeYaniv Rosner
All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix port swap for BCM8073Yaniv Rosner
Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix LED blink rate on BCM84823Yaniv Rosner
Fix blink rate of activity LED of the BCM84823 on 10G link Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Remove setting XAUI low-power for BCM8073Yaniv Rosner
A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that. The fix is not to set set XAUI low power mode for this PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30Merge branch 'batman-adv/merge-oopsonly' of ↵David S. Miller
git://git.open-mesh.org/ecsv/linux-merge
2011-01-30DMA: PL08x: fix channel pausing to timeout rather than lockupRussell King - ARM Linux
If a transfer is initiated from memory to a peripheral, then data is fetched and the channel is marked busy. This busy status persists until the HALT bit is set and the queued data has been transfered to the peripheral. Waiting indefinitely after setting the HALT bit results in system lockups. Timeout this operation, and print an error when this happens. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30DMA: PL08x: fix infinite wait when terminating transfersRussell King - ARM Linux
If we try to pause a channel when terminating a transfer, we could end up spinning for it to become inactive indefinitely, and can result in an uninterruptible wait requiring a reset to recover from. Terminating a transfer is supposed to take effect immediately, but may result in data loss. To make this clear, rename the function to pl08x_terminate_phy_chan(). Also, make sure it is always consistently called - with the spinlock held and IRQs disabled, and ensure that the TC and ERR interrupt status is always cleared. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-31cifs: force a reconnect if there are too many MIDs in flightJeff Layton
Currently, we allow the pending_mid_q to grow without bound with SIGKILL'ed processes. This could eventually be a DoS'able problem. An unprivileged user could a process that does a long-running call and then SIGKILL it. If he can also intercept the NT_CANCEL calls or the replies from the server, then the pending_mid_q could grow very large, possibly even to 2^16 entries which might leave GetNextMid in an infinite loop. Fix this by imposing a hard limit of 32k calls per server. If we cross that limit, set the tcpStatus to CifsNeedReconnect to force cifsd to eventually reconnect the socket and clean out the pending_mid_q. While we're at it, clean up the function a bit and eliminate an unnecessary NULL pointer check. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31cifs: don't pop a printk when sending on a socket is interruptedJeff Layton
If we kill the process while it's sending on a socket then the kernel_sendmsg will return -EINTR. This is normal. No need to spam the ring buffer with this info. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31cifs: simplify SMB header check routineJeff Layton
...just cleanup. There should be no behavior change. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31cifs: send an NT_CANCEL request when a process is signalledJeff Layton
Use the new send_nt_cancel function to send an NT_CANCEL when the process is delivered a fatal signal. This is a "best effort" enterprise however, so don't bother to check the return code. There's nothing we can reasonably do if it fails anyway. Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31cifs: handle cancelled requests betterJeff Layton
Currently, when a request is cancelled via signal, we delete the mid immediately. If the request was already transmitted however, the client is still likely to receive a response. When it does, it won't recognize it however and will pop a printk. It's also a little dangerous to just delete the mid entry like this. We may end up reusing that mid. If we do then we could potentially get the response from the first request confused with the later one. Prevent the reuse of mids by marking them as cancelled and keeping them on the pending_mid_q list. If the reply comes in, we'll delete it from the list then. If it never comes, then we'll delete it at reconnect or when cifsd comes down. Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6Steve French
2011-01-31md: don't clear curr_resync_completed at end of resync.NeilBrown
There is no need to set this to zero at this point. It will be set to zero by remove_and_add_spares or at the start of md_do_sync at the latest. And setting it to zero before MD_RECOVERY_RUNNING is cleared can make a 'zero' appear briefly in the 'sync_completed' sysfs attribute just as resync is finishing. So simply remove this setting to zero. Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-31cifs: fix two compiler warning about uninitialized varsJeff Layton
fs/cifs/link.c: In function ‘symlink_hash’: fs/cifs/link.c:58:3: warning: ‘rc’ may be used uninitialized in this function [-Wuninitialized] fs/cifs/smbencrypt.c: In function ‘mdfour’: fs/cifs/smbencrypt.c:61:3: warning: ‘rc’ may be used uninitialized in this function [-Wuninitialized] Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'for-linus' of git://git.infradead.org/ubi-2.6: Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"
2011-01-31Input: rc-keymap - return KEY_RESERVED for unknown mappingsDmitry Torokhov
Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped scancodes, but rather return KEY_RESERVED. This fixes breakage with Ubuntu's input-kbd utility that stopped returning full keymaps for remote controls. Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Mark Lord <kernel@teksavvy.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - retry failed resets when reconnecting Input: synaptics - fix reconnect logic on MT devices Input: tegra-kbc - fix keymap entry for LeftMeta key Input: tegra-kbc - fix build error
2011-01-31Fix prlimit64 for suid/sgid processesKacper Kornet
Since check_prlimit_permission always fails in the case of SUID/GUID processes, such processes are not able to read or set their own limits. This commit changes this by assuming that process can always read/change its own limits. Signed-off-by: Kacper Kornet <kornet@camk.edu.pl> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-31intel_scu_ipc: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/platform/x86/intel_scu_ipc.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-31NTFS: Fix invalid pointer dereference in ntfs_mft_record_alloc().Anton Altaparmakov
In ntfs_mft_record_alloc() when mapping the new extent mft record with map_extent_mft_record() we overwrite @m with the return value and on error, we then try to use the old @m but that is no longer there as @m now contains an error code instead so we crash when dereferencing the error code as if it were a pointer. The simple fix is to use a temporary variable to store the return value thus preserving the original @m for later use. This is a backport from the commercial Tuxera-NTFS driver and is well tested... Thanks go to Julia Lawall for pointing this out (whilst I had fixed it in the commercial driver I had failed to fix it in the Linux kernel). Signed-off-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: More crypto cleanup (try #2) CIFS: Add strictcache mount option CIFS: Implement cifs_strict_writev (try #4) [CIFS] Replace cifs md5 hashing functions with kernel crypto APIs
2011-01-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm: kmemleak: Allow kmemleak metadata allocations to fail kmemleak: remove memset by using kzalloc
2011-01-31Merge branch 'zerolen' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length drivers/staging/vme/bridges/Module.symvers
2011-01-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: HDA: Fix automute on Thinkpad L412/L512 ALSA: HDA: Fix dmesg output of HDMI supported bits ALSA: fix invalid hardware.h include in ac97c for AVR32 architecture ASoC: correct link specifications for corgi, poodle and spitz ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2s ASoC: Fix codec device id format used by some dai_links ALSA: azt3328 - fix broken AZF_FMT_XLATE macro ALSA: Xonar, CS43xx: Don't overrun static array ASoC: Handle low measured DC offsets for wm_hubs devices ASoC: da8xx/omap-l1xx: match codec_name with i2c ids ASoC: WM8994: fix wrong value in tristate function ASoC: WM8995: Fix incorrect use of snd_soc_update_bits()
2011-01-31Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: set queue DMA alignment to sector size for ATAPI too libata: DVR-212D can't do SETXFER DVD-RW DVR-212D ahci: add HFLAG_YES_FBS and apply it to 88SE9128 pata_hpt37x: inherit prereset() method for HPT374 ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs pata_hpt37x: fold 'if' statement into 'switch' pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...) pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...) pata_mpc52xx: inherit from ata_bmdma_port_ops
generated by cgit (git 2.34.1) at 2025-09-13 22:46:17 +0000