summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-03usbnet: ipheth: Remove unnecessary NULL pointer checkGuenter Roeck
ipheth_carrier_set() is called from two locations. In ipheth_carrier_check_work(), its parameter 'dev' is set with container_of(work, ...) and can not be NULL. In ipheth_open(), dev is extracted from netdev_priv(net) and dereferenced before the call to ipheth_carrier_set(). The NULL pointer check of dev in ipheth_carrier_set() is therefore unnecessary and can be removed. Cc: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: mv88e6xxx: Pass interrupt number in platform dataAndrew Lunn
Allow an interrupt number to be passed in the platform data. The driver will then use it if not zero, otherwise it will poll for interrupts. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03Merge branch 'mv88e6xxx-Disable-ports-to-save-power'David S. Miller
Andrew Lunn says: ==================== mv88e6xxx: Disable ports to save power Save some power by disabling ports. The first patch fully disables a port when it is runtime disabled. The second disables any ports which are not used at all. Depending on configuration strapping, this can lower the temperature of an idle switch a few degrees. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa :mv88e6xxx: Disable unused portsAndrew Lunn
If the NO_CPU strap is set, the switch starts in 'dumb hub' mode, with all ports enable. Ports which are then actively used are reconfigured as required when the driver starts. However unused ports are left alone. Change this to disable them, and turn off any SERDES interface. This could save some power and so reduce the temperature a bit. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: mv88e6xxx: Set STP disable state in port_disableAndrew Lunn
When requested to disable a port, set the port STP state to disabled. This fully disables the port and should save some power. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03hv_netvsc: fix race that may miss tx queue wakeupHaiyang Zhang
When the ring buffer is almost full due to RX completion messages, a TX packet may reach the "low watermark" and cause the queue stopped. If the TX completion arrives earlier than queue stopping, the wakeup may be missed. This patch moves the check for the last pending packet to cover both EAGAIN and success cases, so the queue will be reliably waked up when necessary. Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2019-05-03 This series contains updates to the i40e driver only. Carolyn changes the driver behavior to now disable the VF after one MDD event instead of allowing a couple of MDD events before doing the reset. Aleksandr changes the driver to only report an error when a VF tries to remove VLAN when a port VLAN is configured, unless it is VLAN 0. Also extends the LLDP support to be able to keep the current LLDP state persistent across a power cycle. Maciej fixes the checksum calculation due to firmware changes, which requires the driver to perform a double shadow RAM dump in some cases. Adam adds advertising support for 40GBase_LR4, 40GBase_CR4 and fibre in the driver. Jake cleans up a check that is not needed and was producing a warning in GCC 8. Harshitha fixes a misleading message by ensuring that a success message is only printed on the host side when the promiscuous mode change has been successful. Stefan Assmann adds the vendor id and device id to the dmesg log entry during probe to help with bug reports when lspci output may not be available. Alice and Piotr add recovery mode support in the i40e driver, which is needed for migrating from a structured to a flat firmware image. v2: Removed patch 1 "i40e: replace switch-statement to speed-up retpoline-enabled builds" from the series since it is no longer needed. Also updated the last patch in the series that introduces recovery mode support, to include a more detailed patch description and removed code not intended for the upstream kernel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: - PPC and ARM bugfixes from submaintainers - Fix old Windows versions on AMD (recent regression) - Fix old Linux versions on processors without EPT - Fixes for LAPIC timer optimizations * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: nVMX: Fix size checks in vmx_set_nested_state KVM: selftests: make hyperv_cpuid test pass on AMD KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size x86/kvm/mmu: reset MMU context when 32-bit guest switches PAE KVM: x86: Whitelist port 0x7e for pre-incrementing %rip Documentation: kvm: fix dirty log ioctl arch lists KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit KVM: arm/arm64: Don't emulate virtual timers on userspace ioctls kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP KVM: arm/arm64: Ensure vcpu target is unset on reset failure KVM: lapic: Convert guest TSC to host time domain if necessary KVM: lapic: Allow user to disable adaptive tuning of timer advancement KVM: lapic: Track lapic timer advance per vCPU KVM: lapic: Disable timer advancement if adaptive tuning goes haywire x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012 KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short KVM: PPC: Book3S: Protect memslots while validating user address KVM: PPC: Book3S HV: Perserve PSSCR FAKE_SUSPEND bit on guest exit KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs ...
2019-05-03mips: Perform early low memory testSerge Semin
memblock subsystem provides a method to optionally test the passed memory region in case if it was requested via special kernel boot argument. Lets add the function at the bottom of the arch_mem_init() method. Testing at this point in the boot sequence should be safe since all critical areas are now reserved and a minimum of allocations have been done. Reviewed-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: Serge Semin <Sergey.Semin@t-platforms.ru> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-03mips: Dump memblock regions for debuggingSerge Semin
It is useful to have the whole memblock memory space printed to console when basic memlock initializations are done. It can be performed by ready-to-use method memblock_dump_all(), which prints the available and reserved memory spaces if memblock=debug kernel parameter is specified. Lets call it at the very end of arch_mem_init() function, when all memblock memory and reserved regions are defined, but before any serious allocation is performed. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: Serge Semin <Sergey.Semin@t-platforms.ru> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-03parisc: Update huge TLB page support to use per-pagetable spinlockJohn David Anglin
This patch updates the parisc huge TLB page support to use per-pagetable spinlocks. This patch requires Mikulas' per-pagetable spinlock patch and the revised TLB serialization patch from Helge and myself. With Mikulas' patch, we need to use the per-pagetable spinlock for page table updates. The TLB lock is only used to serialize TLB flushes on machines with the Merced bus. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Use per-pagetable spinlockMikulas Patocka
PA-RISC uses a global spinlock to protect pagetable updates in the TLB fault handlers. When multiple cores are taking TLB faults simultaneously, the cache line containing the spinlock becomes a bottleneck. This patch embeds the spinlock in the top level page directory, so that every process has its own lock. It improves performance by 30% when doing parallel compilations. At least on the N class systems, only one PxTLB inter processor broadcast can be active at any one time on the Merced bus. If a Merced bus is found, this patch serializes the TLB flushes with the pa_tlb_flush_lock spinlock. v1: Initial patch by Mikulas v2: Added Merced detection by Helge v3: Revised TLB serialization by Dave & Helge Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Allow live-patching of __meminit functionsHelge Deller
When making the text sections writeable with set_kernel_text_rw(1), include all text sections including those in the __init section. Otherwise functions marked with __meminit will stay read-only. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 4.20+
2019-05-03parisc: Add memory barrier to asm pdc and sync instructionsHelge Deller
Add compiler memory barriers to ensure the compiler doesn't reorder memory operations around these instructions. Cc: stable@vger.kernel.org # v4.20+ Fixes: 3847dab77421 ("parisc: Add alternative coding infrastructure") Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Add memory clobber to TLB purgesJohn David Anglin
The pdtlb and pitlb instructions are strongly ordered. The asms invoking these instructions should be compiler memory barriers to ensure the compiler doesn't reorder memory operations around these instructions. Signed-off-by: John David Anglin <dave.anglin@bell.net> CC: stable@vger.kernel.org # v4.20+ Fixes: 3847dab77421 ("parisc: Add alternative coding infrastructure") Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Use ldcw instruction for SMP spinlock release barrierJohn David Anglin
There are only a couple of instructions that can function as a memory barrier on parisc. Currently, we use the sync instruction as a memory barrier when releasing a spinlock. However, the ldcw instruction is a better barrier when we have a handy memory location since it operates in the cache on coherent machines. This patch updates the spinlock release code to use ldcw. I also changed the "stw,ma" instructions to "stw" instructions as it is not an adequate barrier. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Remove lock code to serialize TLB operations in pacache.SJohn David Anglin
TLB operations only need to be serialized on machines with the Merced (Stretch) bus. The only machines in this category are L and N class, and they require a 64-bit PA 2.0 kernel. On these machines, we use local TLB purges in the tmpalias routines. We don't need to serialize TLB purges on all other machines. Thus, the lock/unlock code can be removed when CONFIG_PA20 is not defined. Further, when CONFIG_PA20 is not defined, alternative patching converts the TLB purges to local purges when PA 2.0 hardware has been detected. Signed-off-by: John David Anglin <dave.anglin@bell.net> Tested-By: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Switch from DISCONTIGMEM to SPARSEMEMHelge Deller
The commit 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs") breaks memory management on a parisc c8000 workstation with this memory layout: 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB 1) Start 0x0000000100000000 End 0x00000001bfdfffff Size 3070 MB 2) Start 0x0000004040000000 End 0x00000040ffffffff Size 3072 MB With the patch 1c30844d2dfe, the kernel will incorrectly reclaim the first zone when it fills up, ignoring the fact that there are two completely free zones. Basiscally, it limits cache size to 1GiB. The parisc kernel is currently using the DISCONTIGMEM implementation, but isn't NUMA. Avoid this issue or strange work-arounds by switching to the more commonly used SPARSEMEM implementation. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs") Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: enable wide mode earlySven Schnelle
The idle task might have been allocated above 4GB. With the current code we cannot access that memory because the CPU is still running in narrow mode. This was found on a J5000 machine and the patch is required to enable SPARSEMEM on that machine. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: update feature listsSven Schnelle
Update lists to reflect that we have now KGDB and kretprobes support. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Show n/a if product number not availableHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: remove unused flags parameter in __patch_text()Sven Schnelle
It's not used by patch_map()/patch_unmap(), so lets remove it. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03doc: update kprobes supported architecture listSven Schnelle
Now that kprobes and kretprobes are implemented, update the list in Documentation to reflect that. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Implement kretprobesSven Schnelle
Implement kretprobes on parisc, parts stolen from powerpc. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: remove kprobes.h from generic-ySven Schnelle
We're providing our own version now. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Implement kprobesSven Schnelle
Implement kprobes support for PA-RISC. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: add functions required by KPROBE_EVENTSSven Schnelle
implement regs_get_register(), regs_get_kernel_stack_nth() and regs_within_kernel_stack() Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: PA-Linux requires at least 32 MB RAMHelge Deller
Even a 32-bit kernel requires at least 27 MB to decompress itself, so halt the system with a message if the system has less memory than 32 MB. Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Skip registering LED when running in QEMUHelge Deller
No need to spend CPU cycles when we run on QEMU. Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@vger.kernel.org # v4.9+
2019-05-03parisc: Tune LASI LAN for QEMUHelge Deller
Do not loose cycles when we run on QEMU, and fix one trivial typo. Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Export running_on_qemu symbol for modulesHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@vger.kernel.org # v4.9+
2019-05-03parisc: add KGDB supportSven Schnelle
This patch add KGDB support to PA-RISC. It also implements single-stepping utilizing the recovery counter. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: add parisc code patchingSven Schnelle
Instead of re-mapping the whole kernel text with RWX rights add a patch_text() which can be used to replace instructions in the kernel .text section. Based on the ARM implementation. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: add set_fixmap()/clear_fixmap()Sven Schnelle
These functions will be used for adding code patching functions later. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Consider stack randomization for mmap base only when necessaryAlexandre Ghiti
Do not offset mmap base address because of stack randomization if current task does not want randomization. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03i40e: Introduce recovery mode supportAlice Michael
This patch introduces "recovery mode" to the i40e driver. It is part of a new Any2Any idea of upgrading the firmware. In this approach, it is required for the driver to have support for "transition firmware", that is used for migrating from structured to flat firmware image. In this new, very basic mode, i40e driver must be able to handle particular IOCTL calls from the NVM Update Tool and run a small set of AQ commands. These additional AQ commands are part of the interface used by the NVMUpdate tool. The NVMUpdate tool contains all of the necessary logic to reference these new AQ commands. The end user experience remains the same, they are using the NVMUpdate tool to update the NVM contents. Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Piotr Marczak <piotr.marczak@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: print PCI vendor and device ID during probeStefan Assmann
Printing each devices PCI vendor and device ID has the advantage of easily revealing what hardware we're dealing with exactly. It's no longer necessary to match the PCI bus information to the lspci output. Helps with bug reports where no lspci output is available. Output before i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 and after i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 [8086:1572] [8086:0004] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: fix misleading message about promisc setting on un-trusted VFHarshitha Ramamurthy
A refactor of the i40e_vc_config_promiscuous_mode_msg function moved the check for un-trusted VF into another function. We have to lie to an un-trusted VF that its request to set promiscuous mode is successful even when it is not because we don't want the VF to find out its trust status this way. With the refactor, we were running into a case where even though we were not setting promiscuous mode for an un-trusted VF, we still printed a misleading message that it was successful. This patch fixes that by ensuring that a success message is printed on the host side only when the promiscuous mode change has been successful. Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: update version numberAlice Michael
Just bumping the version number appropriately. Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: remove out-of-range comparisons in i40e_validate_cloud_filterJacob Keller
The function i40e_validate_cloud_filter checks that the destination and source port numbers are valid by attempting to ensure that the number is non-zero and no larger than 0xFFFF. However, the types for the dst_port and src_port variable are __be16 which by definition cannot be larger than 0xFFFF Since these values cannot be larger than 2 bytes, the check to see if they exceed 0xFFFF is meaningless. One might consider these checks as some sort of defensive coding, in case the type was later changed. However, these checks also byte-swap the value before comparison using be16_to_cpu, which will truncate the values to 16bits anyways. Additionally, changing the type would require updating the opcodes to support new data layout of these virtchnl commands. Remove the check to silence the -Wtype-limits warning that was added to GCC 8. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Further implementation of LLDPAleksandr Loktionov
This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Report advertised link modes on 40GBase_LR4, CR4 and fibreAdam Ludkiewicz
Add assignments for advertising 40GBase_LR4, 40GBase_CR4 and fibre Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: ShadowRAM checksum calculation changeMaciej Paczkowski
Due to changes in FW the SW is required to perform double SR dump in some cases. Implementation adds two new steps to update nvm checksum function: * recalculate checksum and check if checksum in NVM is correct * if checksum in NVM is not correct then update it again Signed-off-by: Maciej Paczkowski <maciej.paczkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: remove error msg when vf with port vlan tries to remove vlan 0Aleksandr Loktionov
VF's attempt to delete vlan 0 when a port vlan is configured is harmless in this case pf driver just does nothing. If vf will try to remove other vlans when a port vlan is configured it will still produce error as before. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: change behavior on PF in response to MDD eventCarolyn Wyborny
TX MDD events reported on the PF are the result of the PF misconfiguring a descriptor and not because of "bad actions" by anything else. No need to reset now because if it results in a Tx hang, the Tx hang check will take care of it. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Fix for allowing too many MDD events on VFCarolyn Wyborny
This patch changes the driver behavior when detecting a VF MDD event. It now disables the VF after one event, which indicates a hw detected problem in the VF. Before this change, the PF would allow a couple of events before doing the reset. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03drm/panfrost: Show stored feature registersRobin Murphy
Re-reading the feature registers for the sake of displaying the raw values seems pointless, and in fact showing the copies that we've already read and stored is arguably more useful in terms of giving exposure to any potential bugs in that part of the process. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/ce5e414adb008baeed9e2ceb9c88f28d5c74ea42.1556195258.git.robin.murphy@arm.com
2019-05-03drm/panfrost: Don't scream about deferred probeRobin Murphy
Probe deferral is far from "fatal". Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/b6ff1f18ac0612f29fd2e3336d6663b7e02db572.1556195258.git.robin.murphy@arm.com
2019-05-03drm/panfrost: Disable PM on probe failureRobin Murphy
Make sure to disable runtime PM again if probe fails after we've enabled it. Otherwise, any subsequent attempt to re-probe starts triggering "Unbalanced pm_runtime_enable!" assertions from the driver core. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/2487391e7646cabbc52e9b4c20182e39d3f61859.1556195258.git.robin.murphy@arm.com
2019-05-03drm/panfrost: Set DMA masks earlierRobin Murphy
The DMA masks need to be set correctly before any DMA API activity kicks off, and the current point in panfrost_probe() is way too late in that regard. since panfrost_mmu_init() has already set up a live address space and DMA-mapped MMU pagetables. We can't set masks until we've queried the appropriate value from MMU_FEATURES, but as soon as reasonably possible after that should suffice. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/64361b929a5c61d2ab9580262ecb3d369164cfcb.1556195258.git.robin.murphy@arm.com
generated by cgit (git 2.34.1) at 2025-09-14 07:01:01 +0000