summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-03kbuild: move samples/ to KBUILD_VMLINUX_OBJSMasahiro Yamada
Handle samples/ like the other top-level directories to simplify the Makefile. Include include/config/auto.conf earlier to evaluate drivers-$(CONFIG_SAMPLES). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-03RDMA: Get rid of iw_cm_verbsKamal Heib
Integrate iw_cm_verbs data members into ib_device_ops and ib_device structs, this is done to achieve the following: 1) Avoid memory related bugs durring error unwind 2) Make the code more cleaner 3) Reduce code duplication Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3998Harish Bandi
Add compatible string for the Qualcomm WCN3998 Bluetooth controller Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-03Bluetooth: hci_qca: Added support for WCN3998Harish Bandi
Added new compatible for WCN3998 and corresponding voltage and current values to WCN3998 compatible. Changed driver code to support WCN3998 Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-03RDMA/core: Do not invoke init_port on compat devicesParav Pandit
The driver interface cannot manipulate the sysfs of the compat device, only of the full device so we must avoid calling the driver sysfs APIs on compat devices. This prevents an oops: Call Trace: dump_stack+0x5a/0x73 kobject_init+0x74/0x80 kobject_init_and_add+0x35/0xb0 hfi1_create_port_files+0x6e/0x3c0 [hfi1] ib_setup_port_attrs+0x43b/0x560 [ib_core] add_one_compat_dev+0x16a/0x230 [ib_core] rdma_dev_init_net+0x110/0x160 [ib_core] ops_init+0x38/0xf0 setup_net+0xcf/0x1e0 copy_net_ns+0xb7/0x130 create_new_namespaces+0x11a/0x1b0 unshare_nsproxy_namespaces+0x55/0xa0 ksys_unshare+0x1a7/0x340 __x64_sys_unshare+0xe/0x20 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 5417783eabb2 ("RDMA/core: Support core port attributes in non init_net") Reported-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03i2c: core: ratelimit 'transfer when suspended' errorsWolfram Sang
There are two problems with WARN_ON() here. One: It is not ratelimited. Two: We don't see which adapter was used when trying to transfer something when already suspended. Implement a custom ratelimit once per adapter and use dev_WARN there. This fixes both issues. Drawback is that we don't see if multiple drivers are trying to transfer with the same adapter while suspended. They need to be discovered one after the other now. This is better than a high CPU load because a really broken driver might try to resend endlessly. Fixes: 9ac6cb5fbb17 ("i2c: add suspended flag and accessors for i2c adapters") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org # v5.1+
2019-05-03Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-5.2 Mainly some pca954x work, i.e. removal of unused platform data support and added support for sysfs interface for manipulating/examining the idle state. And then a mechanical cocci-style patch.
2019-05-03IB/core: Set qp->real_qp before it may be accessedArtemy Kovalyov
real_qp should be initialized before ib_destroy_qp() is called. ib_destroy_qp() may be called in the error flow if ib_create_qp_security() failed. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03IB/mlx5: Add missing XRC options to QP optional params maskJack Morgenstein
The QP transition optional parameters for the various transition for XRC QPs are identical to those for RC QPs. Many of the XRC QP transition optional parameter bits are missing from the QP optional mask table. These omissions caused failures when doing XRC QP state transitions. For example, when trying to change the response timer of an XRC receive QP via the RTS2RTS transition, the new timer value was ignored because MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask for XRC qps for the RTS2RTS transition. Fix this by adding the missing XRC optional parameters for all QP transitions to the opt_mask table. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Fixes: a4774e9095de ("IB/mlx5: Fix opt param mask according to firmware spec") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA/uverbs: Initialize uverbs_attr_bundle ucontext in ib_uverbs_get_contextShamir Rabinovitch
ib_uverbs_get_context does not have a uobject so it does not call the rdma_lookup_get_uobject which is used to set up the uverbs_attr_bundle ucontext. For ib_uverbs_get_context we need to set up this manually before we send the uverbs_attr_bundle down to the driver layer. This completes the change that was done in commit 70f06b26f07e ("IB: ucontext should be set properly for all cmd & ioctl paths") Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03Merge tag 'at24-v5.2-updates-for-wolfram' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.2 at24: updates for linux v5.2 - change my e-mail address - add a new compatible for Renesas R1EX24016 to the DT binding document
2019-05-03scripts/documentation-file-ref-check: detect broken :doc:`foo`Mauro Carvalho Chehab
As we keep migrating documents to ReST, we're starting to see more of such tags. Right now, all such tags are pointing to a documentation file, but regressions may be introduced. So, add a check for such kind of issues as well. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-03scripts/documentation-file-ref-check: don't parse Next/ dirMauro Carvalho Chehab
If one tries to run this script under linux-next, it would hit lots of false-positives, due to the tree merges that are stored under the Next/ directory. So, add a logic to ignore it. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-03LICENSES: Rename other to deprecatedChristoph Hellwig
Make it clear in the directory name that these are not intended for new code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-03LICENSES: Clearly mark dual license only licensesChristoph Hellwig
Just like the CDDL the Apache license and the MPL must only be used as a choice in additional to an GPL2 compatible license. Copy over the boilerplate from the CDDL file to the other two after fixing it up to make it clear the licenses need to be GPL2 compatible, not just the more generic GPL compatible. For example the Apache 2 license is GPL3 compatible, but that doesn't matter for the kernel. Also move these licenses to a separate directory and document the rules in license-rules.rst. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-03docs: Don't reference the ZLib license in license-rules.rstChristoph Hellwig
We never had a file called LICENSES/other/ZLib in the tree, so don't reference it. Instead mention the GPL v1 as an (bad) example. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-03rtw88: add license for MakefileYan-Hsuan Chuang
Add missing license for Makefile Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-03sched/core: Allow the remote scheduler tick to be started on CPU0Nicholas Piggin
This has no effect yet because CPU0 will always be a housekeeping CPU until a later change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20190411033448.20842-2-npiggin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03Merge branch 'linus' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03perf/x86/intel/pt: Remove software double buffering PMU capabilityAlexander Shishkin
Now that all AUX allocations are high-order by default, the software double buffering PMU capability doesn't make sense any more, get rid of it. In case some PMUs choose to opt out, we can re-introduce it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03perf/ring_buffer: Fix AUX software double bufferingAlexander Shishkin
This recent commit: 5768402fd9c6e87 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") overlooked the fact that the previous one page granularity of the AUX buffer provided an implicit double buffering capability to the PMU driver, which went away when the entire buffer became one high-order page. Always make the full-trace mode AUX allocation at least two-part to preserve the previous behavior and allow the implicit double buffering to continue. Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Fixes: 5768402fd9c6e87 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") Link: http://lkml.kernel.org/r/20190503085536.24119-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03Merge branch 'for-next/perf' of ↵Will Deacon
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into for-next/core
2019-05-03drm/etnaviv: initialize idle mask before querying the HW dbLucas Stach
If there is a match in the HW DB, the function is left early, before inititalizing the idle mask. Fix this by doing the init earlier, as only old GPUs, not present in the HW DB need a different idle mask. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-03Merge tag 'misc-habanalabs-next-2019-05-03' of ↵Greg Kroah-Hartman
git://people.freedesktop.org/~gabbayo/linux into char-misc-next Oded writes: This tag contains further changes for kernel 5.2. The changes are either bug fixes or simple re-factoring of existing code. The notable changes are: - Add missing fields in the bmon structure that is passed in the debug IOCTL when the user wants to configure the bus monitor. - Use the dedicated device-CPU accessible memory pool for all host memory allocations that are accessible directly by the embedded CPU. This is needed to enforce certain restrictions we have due to the embedded CPU's architecture. - Manipulate DMA addresses only inside ASIC-specific files. This is needed to better support future ASICs code. Other minor changes include: - Move pr_fmt() to c files to avoid dependency in include order. - Remove call to CS parsing function for workloads that originates from the driver and remove dead code as a result from this change. - Update names of structure members and labels to better reflect their usage. - When moving the dram PCI bar aperture, return the old aperture address range instead of error code. This will allow us to restore the old address range in a simpler fashion. * tag 'misc-habanalabs-next-2019-05-03' of git://people.freedesktop.org/~gabbayo/linux: habanalabs: Update CPU DMA memory label name habanalabs: Update CPU DMA pool label name habanalabs: increase timeout if working with simulator habanalabs: remove condition that is always true habanalabs: remove redundant member from parser struct habanalabs: Manipulate DMA addresses in ASIC functions habanalabs: rename functions to improve code readability habanalabs: remove call to cs_parser() habanalabs: Use single pool for CPU accessible host memory habanalabs: return old dram bar address upon change habanalabs: rename restore to ctx_switch when appropriate habanalabs: use ASIC functions interface for rreg/wreg uapi/habanalabs: add missing fields in bmon params habanalabs: re-factor goya_parse_cb_no_ext_queue() habanalabs: Cancel pr_fmt() definition dependency on includes order
2019-05-03USB: serial: f81232: implement break controlJi-Ze Hong (Peter Hong)
Implement Fintek F81232 break on/off with LCR register. It's the same with 16550A LCR register layout. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> [ johan: fix corrupt line settings on break due to missing shadow_lcr update in set_termios() ] Signed-off-by: Johan Hovold <johan@kernel.org>
2019-05-03USB: serial: f81232: add high baud rate supportJi-Ze Hong (Peter Hong)
The F81232 had 4 clocksource 1.846/18.46/14.77/24MHz and baud rates can be up to 1.5Mbits with 24MHz. F81232 Clock registers (106h) Bit1-0: Clock source selector 00: 1.846MHz. 01: 18.46MHz. 10: 24MHz. 11: 14.77MHz. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-05-03USB: serial: f81232: clear overrun flagJi-Ze Hong (Peter Hong)
The F81232 will report data and LSR with bulk like following format: bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... LSR will auto clear frame/parity/break error flag when reading by H/W, but overrrun will only cleared when reading LSR. So this patch add a worker to read LSR when overrun and flush the worker on close() & suspend(). Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-05-03USB: serial: f81232: fix interrupt worker not stopJi-Ze Hong (Peter Hong)
The F81232 will use interrupt worker to handle MSR change. This patch will fix the issue that interrupt work should stop in close() and suspend(). This also fixes line-status events being disabled after a suspend cycle until the port is re-opened. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> [ johan: amend commit message ] Fixes: 87fe5adcd8de ("USB: f81232: implement read IIR/MSR with endpoint") Cc: stable <stable@vger.kernel.org> # 4.1 Signed-off-by: Johan Hovold <johan@kernel.org>
2019-05-03Merge tag 'intel-pinctrl-v5.2-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v5.2-1 Non-critical fixes for Intel Baytrail and Intel Cedarfork. Couple of fixes for all pinctrl-intel based drivers with regard to IRQ handling, i.e. moving PM calls to noirq level to avoid IRQ lose and restore ownership of pins to prevent IRQ masking side effect. The following is an automated git shortlog grouped by driver: baytrail: - Fix potential NULL pointer dereference cedarfork: - Update pin names according to v1.13c intel: - Increase readability of intel_gpio_update_pad_mode() - Retain HOSTSW_OWN for requested gpio pin - move gpio suspend/resume to noirq phase
2019-05-03pinctrl: Rework Kconfig dependency for BM1880 pinctrl driverManivannan Sadhasivam
Make the BM1880 SoC pinctrl driver depend on COMPILE_TEST to get compiler test coverage and also select this driver by default for ARCH_BITMAIN platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-03MAINTAINERS: Add entry for BM1880 pinctrlManivannan Sadhasivam
Add MAINTAINERS entry for Bitmain BM1880 SoC pinctrl. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-03pinctrl: Add pinctrl support for BM1880 SoCManivannan Sadhasivam
Add pinctrl support for Bitmain BM1880 SoC. The driver only handles pinmuxing as the SoC is not capable of handling pinconf. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-03dt-bindings: pinctrl: Add BM1880 pinctrl bindingManivannan Sadhasivam
Add pinctrl binding for Bitmain BM1880 SoC. The SoC is not capable of handling pinconf, thereby supporting only pinmux and this limitation is documented. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-03pinctrl: stm32: check irq controller availability at probeFabien Dessenne
It is not guaranteed that the IRQ controller driver is probed before the pin controller driver gets probed. Considering this, check for the irq domain availability during probe and return EPROBE_DEFER if needed. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-03pinctrl: mediatek: Add MT8516 Pinctrl driverFabien Parent
This commit adds the pinctrl driver for the MediaTek's MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-03pinctrl: zte: fix leaked of_node referencesWen Yang
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/zte/pinctrl-zx.c:415:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:422:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:436:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:444:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:448:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jun Nie <jun.nie@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-03ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSEMac Chiang
On kbl_rt5663_max98927, commit 38a5882e4292 ("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE") This key pair mapping to play/pause when playing Youtube The Android 3.5mm Headset jack specification mentions that BTN_0 should be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE, which has much broader userspace support. For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle play/pause of videos and audio, but does not handle KEY_MEDIA. Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the new USB headset spec requires KEY_PLAYPAUSE for BTN_0. https://source.android.com/devices/accessories/headset/usb-headset-spec The same fix is required on Chrome kbl_da7219_max98357a. Signed-off-by: Mac Chiang <mac.chiang@intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-03regulator: core: simplify return value on suported_voltageJorge Ramirez-Ortiz
All the current clients of this API assume that 0 corresponds to a failure and non-zero to a pass therefore ignoring the need to handle a negative error code. This commit modifies the API to follow that standard since returning a negative (EINVAL) doesn't seem to provide enough value to justify the need to handle it. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-03kobject: clean up the kobject add documentation a bit moreGreg Kroah-Hartman
Commit 1fd7c3b438a2 ("kobject: Improve doc clarity kobject_init_and_add()") tried to provide more clarity, but the reference to kobject_del() was incorrect. Fix that up by removing that line, and hopefully be more explicit as to exactly what needs to happen here once you register a kobject with the kobject core. Acked-by: Tobin C. Harding <tobin@kernel.org> Fixes: 1fd7c3b438a2 ("kobject: Improve doc clarity kobject_init_and_add()") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03staging: kpc2000: kpc_spi: Fix build error for {read,write}qNathan Chancellor
drivers/staging/kpc2000/kpc_spi/spi_driver.c:158:11: error: implicit declaration of function 'readq' [-Werror,-Wimplicit-function-declaration] drivers/staging/kpc2000/kpc_spi/spi_driver.c:167:5: error: implicit declaration of function 'writeq' [-Werror,-Wimplicit-function-declaration] Same as commit 91b6cb7216cd ("staging: kpc2000: fix up build problems with readq()"). Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03usb: dwc3: Rename DWC3_DCTL_LPM_ERRATAThinh Nguyen
The macro name DWC3_DCTL_LPM_ERRATA is uninformative and does not do masking. Remove DWC3_DCTL_LPM_ERRATA_MASK and rename DWC3_DCTL_LPM_ERRATA to DWC3_DCTL_NYET_THRES with proper masking. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: Fix default lpm_nyet_threshold valueThinh Nguyen
The max possible value for DCTL.LPM_NYET_THRES is 15 and not 255. Change the default value to 15. Cc: stable@vger.kernel.org Fixes: 80caf7d21adc ("usb: dwc3: add lpm erratum support") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: debug: Print GET_STATUS(device) tracepointThinh Nguyen
DWC3 is missing the printing of control request GET_STATUS(device) tracepoint. This patch prints that. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: Do core validation early on probeThinh Nguyen
The setting of the dr_mode may need to check the controller's revision. The revision is set in the dwc3_core_is_valid(), which comes after dr_mode setting. Let's move it closer to the start of the dwc3_probe() function and before calling dwc3_get_dr_mode(). Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc3: gadget: Set lpm_capableThinh Nguyen
All DWC3 controllers are LPM capable. Report that in the usb_gadget.lpm_capable for the gadget driver to properly output the bcdUSB value in the descriptor. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: gadget: atmel: tie wake lock to running clockJonas Bonn
If the USB device is connected to a host, the CPU cannot be suspended or else the USB device appears to be disconnected from the host's point of view. Only after a "USB suspend" state has been entered (as set by the host) or the host is disconnected can the system safely be suspended: in both these states, the clock is stopped. As such, this patch associates a "wake lock" with the running clock of the UDC to keep the system awake as long as the host maintains the USB connection active. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> CC: Cristian Birsan <cristian.birsan@microchip.com> CC: Felipe Balbi <balbi@kernel.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Nicolas Ferre <nicolas.ferre@microchip.com> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> CC: Ludovic Desroches <ludovic.desroches@microchip.com> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: gadget: atmel: support USB suspendJonas Bonn
This patch adds support for USB suspend to the Atmel UDC. When suspended, the UDC clock can be stopped, resulting in some power savings. The "wake up" interrupt will fire irregardless of whether the clock is running or not, allowing the UDC clock to be restarted when the USB master wants to wake the device again. The IRQ state of this device is somewhat fiddly. The "wake up" IRQ seems to actually be a "bus activity" indicator; the IRQ is almost continuously asserted so enabling this IRQ should only be done after a suspend when the wake IRQ becomes relevant. Similarly, the "suspend" IRQ detects "bus inactivity" and may therefore fire together with a "wake" if the two types of activity coincide during the period between two IRQ handler invocations; therefore, it's important to ignore the "suspend" IRQ while waiting for a wake-up. This has been tested on a SAMA5D2 board. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> CC: Cristian Birsan <cristian.birsan@microchip.com> CC: Felipe Balbi <balbi@kernel.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Nicolas Ferre <nicolas.ferre@microchip.com> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> CC: Ludovic Desroches <ludovic.desroches@microchip.com> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled maskJonas Bonn
This patch adds set and clear functions for enabling/disabling interrupts. This simplifies the implementation a bit as the masking of previously set bits doesn't need to be so explicit. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> CC: Cristian Birsan <cristian.birsan@microchip.com> CC: Felipe Balbi <balbi@kernel.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Nicolas Ferre <nicolas.ferre@microchip.com> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> CC: Ludovic Desroches <ludovic.desroches@microchip.com> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03dwc2: gadget: Fix completed transfer size calculation in DDMAMinas Harutyunyan
Fix calculation of transfer size on completion in function dwc2_gadget_get_xfersize_ddma(). Added increment of descriptor pointer to move to next descriptor in the loop. Fixes: aa3e8bc81311 ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc2: Set lpm mode parameters depend on HW configurationMinas Harutyunyan
If core not supported lpm, i.e. BCM2835 then confusing warnings seen in log. To avoid these warnings, added function dwc2_set_param_lpm() to set lpm and other lpm related parameters based on lpm support by core. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-15 09:32:10 +0000