summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-20nvme-pci: clear shadow doorbell memory on resetsKeith Busch
The host memory doorbell and event buffers need to be initialized on each reset so the driver doesn't observe stale values from the previous instantiation. Signed-off-by: Keith Busch <kbusch@kernel.org> Tested-by: John Levon <john.levon@nutanix.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme-rdma: fix error code in nvme_rdma_setup_ctrlMax Gurtovoy
In case that icdoff is not zero or mandatory keyed sgls are not supported by the NVMe/RDMA target, we'll go to error flow but we'll return 0 to the caller. Fix it by returning an appropriate error code. Fixes: c66e2998c8ca ("nvme-rdma: centralize controller setup sequence") Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme-multipath: add error handling support for add_disk()Luis Chamberlain
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Since we now can tell for sure when a disk was added, move setting the bit NVME_NSHEAD_DISK_LIVE only when we did add the disk successfully. Nothing to do here as the cleanup is done elsewhere. We take care and use test_and_set_bit() because it is protects against two nvme paths simultaneously calling device_add_disk() on the same namespace head. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: use macro definitions for setting cmic valueMax Gurtovoy
This makes the code more readable. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: use macro definition for setting nmic valueMax Gurtovoy
This makes the code more readable. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: display correct subsystem NQNHannes Reinecke
With discovery controllers supporting unique subsystem NQNs the actual subsystem NQN might be different from that one passed in via the connect args. So add a helper to display the resulting subsystem NQN. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: Add connect option 'discovery'Hannes Reinecke
Add a connect option 'discovery' to specify that the connection should be made to a discovery controller, not a normal I/O controller. With discovery controllers supporting unique subsystem NQNs we cannot easily distinguish by the subsystem NQN if this should be a discovery connection, but we need this information to blank out options not supported by discovery controllers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: expose subsystem type in sysfs attribute 'subsystype'Hannes Reinecke
With unique discovery controller NQNs we cannot distinguish the subsystem type by the NQN alone, but need to check the subsystem type, too. So expose the subsystem type in a new sysfs attribute 'subsystype'. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: set 'CNTRLTYPE' in the identify controller dataHannes Reinecke
Set the correct 'CNTRLTYPE' field in the identify controller data. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: add nvmet_is_disc_subsys() helperHannes Reinecke
Add a helper function to determine if a given subsystem is a discovery subsystem. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: add CNTRLTYPE definitions for 'identify controller'Hannes Reinecke
Update the 'identify controller' structure to define the newly added CNTRLTYPE field. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: make discovery NQN configurableHannes Reinecke
TPAR8013 allows for unique discovery NQNs, so make the discovery controller NQN configurable by exposing a subsys attribute 'discovery_nqn'. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet-rdma: implement get_max_queue_size controller opMax Gurtovoy
Limit the maximal queue size for RDMA controllers. Today, the target reports a limit of 1024 and this limit isn't valid for some of the RDMA based controllers. For now, limit RDMA transport to 128 entries (the max queue depth configured for Linux NVMe/RDMA host). Future general solution should use RDMA/core API to calculate this size according to device capabilities and number of WRs needed per NVMe IO request. Reported-by: Mark Ruijter <mruijter@primelogic.nl> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: add get_max_queue_size op for controllersMax Gurtovoy
Some transports, such as RDMA, would like to set the queue size according to device/port/ctrl characteristics. Add a new nvmet transport op that is called during ctrl initialization. This will not effect transports that don't implement this option. Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme-rdma: limit the maximal queue size for RDMA controllersMax Gurtovoy
Corrent limit of 1024 isn't valid for some of the RDMA based ctrls. In case the target expose a cap of larger amount of entries (e.g. 1024), the initiator may fail to create a QP with this size. Thus limit to a value that works for all RDMA adapters. Future general solution should use RDMA/core API to calculate this size according to device capabilities and number of WRs needed per NVMe IO request. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet-tcp: fix use-after-free when a port is removedIsrael Rukshin
When removing a port, all its controllers are being removed, but there are queues on the port that doesn't belong to any controller (during connection time). This causes a use-after-free bug for any command that dereferences req->port (like in nvmet_alloc_ctrl). Those queues should be destroyed before freeing the port via configfs. Destroy the remaining queues after the accept_work was cancelled guarantees that no new queue will be created. Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet-rdma: fix use-after-free when a port is removedIsrael Rukshin
When removing a port, all its controllers are being removed, but there are queues on the port that doesn't belong to any controller (during connection time). This causes a use-after-free bug for any command that dereferences req->port (like in nvmet_alloc_ctrl). Those queues should be destroyed before freeing the port via configfs. Destroy the remaining queues after the RDMA-CM was destroyed guarantees that no new queue will be created. Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: fix use-after-free when a port is removedIsrael Rukshin
When a port is removed through configfs, any connected controllers are starting teardown flow asynchronously and can still send commands. This causes a use-after-free bug for any command that dereferences req->port (like in nvmet_parse_io_cmd). To fix this, wait for all the teardown scheduled works to complete (like release_work at rdma/tcp drivers). This ensures there are no active controllers when the port is eventually removed. Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20qla2xxx: add ->map_queues support for nvmeSaurav Kashyap
Implement ->map queues and use the block layer blk_mq_pci_map_queues helper for mapping queues to CPUs. With this mapping minimum 10%+ increase in performance is noticed. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme-fc: add support for ->map_queuesSaurav Kashyap
NVMe FC don't have support for map queues, unlike the PCI, RDMA and TCP transports. Add a ->map_queues callout for the LLDDs to provide such functionality. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: generate uevent once a multipath namespace is operational againHannes Reinecke
When fast_io_fail_tmo is set I/O will be aborted while recovery is still ongoing. This causes MD to set the namespace to failed, and no futher I/O will be submitted to that namespace. However, once the recovery succeeds and the namespace becomes operational again the NVMe subsystem doesn't send a notification, so MD cannot automatically reinstate operation and requires manual interaction. This patch will send a KOBJ_CHANGE uevent per multipathed namespace once the underlying controller transitions to LIVE, allowing an automatic MD reassembly with these udev rules: /etc/udev/rules.d/65-md-auto-re-add.rules: SUBSYSTEM!="block", GOTO="md_end" ACTION!="change", GOTO="md_end" ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end" PROGRAM="/sbin/md_raid_auto_readd.sh $devnode" LABEL="md_end" /sbin/md_raid_auto_readd.sh: MDADM=/sbin/mdadm DEVNAME=$1 export $(${MDADM} --examine --export ${DEVNAME}) if [ -z "${MD_UUID}" ]; then exit 1 fi UUID_LINK=$(readlink /dev/disk/by-id/md-uuid-${MD_UUID}) MD_DEVNAME=${UUID_LINK##*/} export $(${MDADM} --detail --export /dev/${MD_DEVNAME}) if [ -z "${MD_METADATA}" ] ; then exit 1 fi if [ $(cat /sys/block/${MD_DEVNAME}/md/degraded) != 1 ]; then echo "${MD_DEVNAME}: array not degraded, nothing to do" exit 0 fi MD_STATE=$(cat /sys/block/${MD_DEVNAME}/md/array_state) if [ ${MD_STATE} != "clean" ] ; then echo "${MD_DEVNAME}: array state ${MD_STATE}, cannot re-add" exit 1 fi MD_VARNAME="MD_DEVICE_dev_${DEVNAME##*/}_ROLE" if [ ${!MD_VARNAME} = "spare" ] ; then ${MDADM} --manage /dev/${MD_DEVNAME} --re-add ${DEVNAME} fi Changes to v2: - Add udev rules example to description Changes to v1: - use disk_uevent() as suggested by hch Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20Merge tag 'sound-5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Again it became bigger than wished, unfortunately, as this contains quite a few ASoC fixes that came up a bit late. It also includes yet more HD- and USB-audio quirks: I decided to merge them now, as those are for stable, and we'll need them sooner or later. Although the volumes are a bit high, all changes are device-specific (and reasonably small) fixes, so it should be safe for the late rc" * tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Fix microphone sound on Jieli webcam. ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset ALSA: hda/realtek: Add quirk for Clevo PC50HS ALSA: usb-audio: add Schiit Hel device to quirk table ASoC: wm8960: Fix clock configuration on slave mode ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked() ASoC: codec: wcd938x: Add irq config support ASoC: DAPM: Fix missing kctl change notifications ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() ASoC: Intel: bytcht_es8316: Use temporary variable for struct device ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() ASoC: wcd938x: Fix jack detection issue ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working ASoC: cs4341: Add SPI device ID table ASoC: pcm179x: Add missing entries SPI to device ID table ASoC: fsl_xcvr: Fix channel swap issue with ARC ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers
2021-10-20Merge tag 'audit-pr-20211019' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "One small audit patch to add a pointer NULL check" * tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix possible null-pointer dereference in audit_filter_rules
2021-10-20ice: Add missing E810 device idsTony Nguyen
As part of support for E810 XXV devices, some device ids were inadvertently left out. Add those missing ids. Fixes: 195fb97766da ("ice: add additional E810 device id") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
2021-10-20igc: Update I226_K device IDSasha Neftin
The device ID for I226_K was incorrectly assigned, update the device ID to the correct one. Fixes: bfa5e98c9de4 ("igc: Add new device ID") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20e1000e: Fix packet loss on Tiger Lake and laterSasha Neftin
Update the HW MAC initialization flow. Do not gate DMA clock from the modPHY block. Keeping this clock will prevent dropped packets sent in burst mode on the Kumeran interface. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213651 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213377 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20Merge tag 'trace-v5.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Recursion fix for tracing. While cleaning up some of the tracing recursion protection logic, I discovered a scenario that the current design would miss, and would allow an infinite recursion. Removing an optimization trick that opened the hole fixes the issue and cleans up the code as well" * tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have all levels of checks prevent recursion
2021-10-20Merge tag 'nios2_fixes_for_v5.15_part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux Pull nios2 fix from Dinh Nguyen: - Renamed CTL_STATUS to CTL_FSTATUS to fix a redefined warning * tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: NIOS2: irqflags: rename a redefined register name
2021-10-20block: cleanup the flush plug helpersChristoph Hellwig
Consolidate the various helpers into a single blk_flush_plug helper that takes a plk_plug and the from_scheduler bool and switch all callsites to call it directly. Checks that the plug is non-NULL must be performed by the caller, something that most already do anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211020144119.142582-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20block: optimise blk_flush_plug_listPavel Begunkov
Don't call flush_plug_callbacks if there are no plug callbacks. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> [hch: split from a larger patch] Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211020144119.142582-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20blk-mq: move blk_mq_flush_plug_list to block/blk-mq.hChristoph Hellwig
This helper is internal to the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211020144119.142582-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20blk-mq: only flush requests from the plug in blk_mq_submit_bioChristoph Hellwig
Replace the call to blk_flush_plug_list in blk_mq_submit_bio with a direct call to blk_mq_flush_plug_list. This means we do not flush plug callback from stackable devices, which doesn't really help with the accumulated requests anyway, and it also means the cached requests aren't freed here as they can still be used later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211020144119.142582-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20io_uring: fix ltimeout unprepPavel Begunkov
io_unprep_linked_timeout() is broken, first it needs to return back REQ_F_ARM_LTIMEOUT, so the linked timeout is enqueued and disarmed. But now we refcounted it, and linked timeouts may get not executed at all, leaking a request. Just kill the unprep optimisation. Fixes: 906c6caaf586 ("io_uring: optimise io_prep_linked_timeout()") Reported-by: Beld Zhang <beldzhang@gmail.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/51b8e2bfc4bea8ee625cf2ba62b2a350cc9be031.1634719585.git.asml.silence@gmail.com Link: https://github.com/axboe/liburing/issues/460 Reported-by: Beld Zhang <beldzhang@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20io_uring: apply max_workers limit to all future usersPavel Begunkov
Currently, IORING_REGISTER_IOWQ_MAX_WORKERS applies only to the task that issued it, it's unexpected for users. If one task creates a ring, limits workers and then passes it to another task the limit won't be applied to the other task. Another pitfall is that a task should either create a ring or submit at least one request for IORING_REGISTER_IOWQ_MAX_WORKERS to work at all, furher complicating the picture. Change the API, save the limits and apply to all future users. Note, it should be done first before giving away the ring or submitting new requests otherwise the result is not guaranteed. Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers") Link: https://github.com/axboe/liburing/issues/460 Reported-by: Beld Zhang <beldzhang@gmail.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/51d0bae97180e08ab722c0d5c93e7439cfb6f697.1634683237.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Tools: - kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic x86: - clean ups and fixes for bus lock vmexit and lazy allocation of rmaps - two fixes for SEV-ES (one more coming as soon as I get reviews) - fix for static_key underflow ARM: - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SEV-ES: reduce ghcb_sa_len to 32 bits KVM: VMX: Remove redundant handling of bus lock vmexit KVM: kvm_stat: do not show halt_wait_ns KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET" KVM: SEV-ES: Set guest_state_protected after VMSA update KVM: X86: fix lazy allocation of rmaps KVM: SEV-ES: fix length of string I/O KVM: arm64: Release mmap_lock when using VM_SHARED with MTE KVM: arm64: Report corrupted refcount at EL2 KVM: arm64: Fix host stage-2 PGD refcount KVM: s390: Function documentation fixes
2021-10-20e1000e: Separate TGP board type from SPTSasha Neftin
We have the same LAN controller on different PCHs. Separate TGP board type from SPT which will allow for specific fixes to be applied for TGP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyringEric W. Biederman
Setting cred->ucounts in cred_alloc_blank does not make sense. The uid and user_ns are deliberately not set in cred_alloc_blank but instead the setting is delayed until key_change_session_keyring. So move dealing with ucounts into key_change_session_keyring as well. Unfortunately that movement of get_ucounts adds a new failure mode to key_change_session_keyring. I do not see anything stopping the parent process from calling setuid and changing the relevant part of it's cred while keyctl_session_to_parent is running making it fundamentally necessary to call get_ucounts in key_change_session_keyring. Which means that the new failure mode cannot be avoided. A failure of key_change_session_keyring results in a single threaded parent keeping it's existing credentials. Which results in the parent process not being able to access the session keyring and whichever keys are in the new keyring. Further get_ucounts is only expected to fail if the number of bits in the refernece count for the structure is too few. Since the code has no other way to report the failure of get_ucounts and because such failures are not expected to be common add a WARN_ONCE to report this problem to userspace. Between the WARN_ONCE and the parent process not having access to the keys in the new session keyring I expect any failure of get_ucounts will be noticed and reported and we can find another way to handle this condition. (Possibly by just making ucounts->count an atomic_long_t). Cc: stable@vger.kernel.org Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Link: https://lkml.kernel.org/r/7k0ias0uf.fsf_-_@disp2133 Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-20media: allegro: write vui parameters for HEVCMichael Tretter
The vui parameters are optional. However, the vui data allows to specify the color space of the encoded video. Write the vui parameters to make sure that decoders are able to pick up the correct color space. Also implement the necessary lookup functions to convert the values from the V4L2 controls to the values specified in the hevc standard. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: nal-hevc: implement generator for vuiMichael Tretter
The NAL unit generator for HEVC does not support the generation of vui parameters. Implement it to allow drivers to set the vui parameters in the coded video stream. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: write correct colorspace into SPSMichael Tretter
Currently, the driver always writes PAL as video format into the SPS of the encoded stream. Set the video format to the default value 5 (unspecified) and use the color description that is already configured on the channel as color space. This fixes the color space definition in the coded data to reflect the configured color space of the video data that is encoded. Add lookup functions to convert the color primaries, transfer function and matrix coefficients from the V4L2 control values to the values specified in the h.264 standard. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: extract nal value lookup functions to headerMichael Tretter
The lookup of the h.264 or hevc values for the respective V4L2 controls is done by the driver that uses the sps/pps generator and not in the generator. Therefore, it is more intuitive to define these functions directly in the header and not in the module. Extract the functions to the headers as static inline functions. Also simplify the function name and add kernel-doc for the hevc functions. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: correctly scale the bit rate in SPSMichael Tretter
The bit rate in the SPS can be scaled by an exponent, which allows to reduce the number of bits in the SPS in case of high bit rates. The driver did not scale the bitrate, but used a scaling exponent of 0. Fix this by properly calculating the scaling factor and writing the bit rate as value and scaling factor into the SPS. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: remove external QP tableMichael Tretter
The VCU allows to specify the QP per frame and coding unit. A buffer that specifies the QP is passed via the ep2 field in the ENCODE_FRAME message. The driver currently does not support the external QP table. Simplify the driver by not setting the ep2 fields at all. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: fix row and column in response messageMichael Tretter
The fields for the number of rows and columns in the encode frame response message are switched. This causes broken PPS, if the encoder uses tiles for encoding and the number of rows and columns differ. Write the fields of the response message into the correct fields of the the internal data structure when parsing the response message. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: add control to disable encoder bufferMichael Tretter
The encoder buffer can have a negative impact on the quality of the encoded video. Add a control to allow user space to disable the encoder buffer per channel if the VCU supports the encoder buffer but the quality is not sufficient. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: add encoder buffer supportMichael Tretter
The encoder buffer serves as a cache for reference frames during the encoding process. The encoder buffer significantly reduces the bandwidth requirement for read accesses on the AXI ports of the VCU, but slightly reduces the quality of the encoded video. The encoder buffer must be configured as a whole during the firmware initialization and later explicitly enabled for every channel that shall use the encoder buffer. Prior to firmware version 2019.2, it was necessary to explicitly set the size of the encoder buffer for every channel. Since 2019.2 it is sufficient to enable the encoder buffer and leave the rest to the firmware. Therefore, only support the encoder buffer for firmware 2019.2 and later. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: add pm_runtime supportMichael Tretter
The allegro driver must ensure that the mcu and core clocks are enabled and set to the expected clock rate before trying to load the firmware and to reset the MCU. Up until now, the driver assumed that the clocks are always enabled in the PL (programming logic), because the xlnx_vcu driver did not export the clocks to other drivers. This has changed and by explicitly enabling the clocks in the driver, this assumption can be dropped. It might even be possible to disable the clocks for the encoder if the encoder is not used. However, the behavior is not documented and it might be necessary to reinitialize the encoder after deactivating the clocks. Play it safe by sticking to the current behavior. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: lookup VCU settingsMichael Tretter
The VCU provides information about its configuration in a dedicated register space. These settings include, for example, the expected clock rates and the configuration of the encoder buffer. In the device tree, the settings are described by the "xlnx,vcu-settings" compatible. The settings are needed to correctly configure the clocks and the encoder buffer. Lookup the VCU settings in the device tree and make it accessible to the driver via a regmap. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: fix module removal if initialization failedMichael Tretter
If the module probe finished, but the firmware initialization failed, removing the module must not revert the firmware initialization. Add a field to track the status of the firmware initialization and only roll it back, if the firmware was successfully initialized. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-20media: allegro: ignore interrupt if mailbox is not initializedMichael Tretter
The mailbox is initialized after the interrupt handler is installed. As the firmware is loaded and started even later, it should not happen that the interrupt occurs without the mailbox being initialized. As the Linux Driver Verification project (linuxtesting.org) keeps reporting this as an error, add a check to ignore interrupts before the mailbox is initialized to fix this potential null pointer dereference. Reported-by: Yuri Savinykh <s02190703@gse.cs.msu.ru> Reported-by: Nadezda Lutovinova <lutovinova@ispras.ru> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-19 07:03:37 +0000