| Age | Commit message (Collapse) | Author |
|---|
|
Update Benno Lossin's email address to `@kernel.org`.
Signed-off-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250519143952.11412-1-lossin@kernel.org
[ Fixed email in `.mailmap`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
io_uring_cmd_import_fixed_vec() is declared in both
include/linux/io_uring/cmd.h and io_uring/uring_cmd.h. The declarations
are identical (if redundant) for CONFIG_IO_URING=y. But if
CONFIG_IO_URING=N, include/linux/io_uring/cmd.h declares the function as
static inline while io_uring/uring_cmd.h declares it as extern. This
causes linker errors if the declaration in io_uring/uring_cmd.h is used.
Remove the declaration in io_uring/uring_cmd.h to avoid linker errors
and prevent the declarations getting out of sync.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: ef4902752972 ("io_uring/cmd: introduce io_uring_cmd_import_fixed_vec")
Link: https://lore.kernel.org/r/20250520193337.1374509-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Update the allowed_cpus selftest to include a check to validate the
behavior of scx_bpf_select_cpu_and() when invoked via a BPF test_run
call.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Allow scx_bpf_select_cpu_and() to be used from an unlocked context, in
addition to ops.enqueue() or ops.select_cpu().
This enables schedulers, including user-space ones, to implement a
consistent idle CPU selection policy and helps reduce code duplication.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Validate locking correctness when accessing p->nr_cpus_allowed and
p->cpus_ptr inside scx_bpf_select_cpu_and(): if the rq lock is held,
access is safe; otherwise, require that p->pi_lock is held.
This allows to catch potential unsafe calls to scx_bpf_select_cpu_and().
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Relocate the scx_kf_allowed_if_unlocked(), so it can be used from other
source files (e.g., ext_idle.c).
No functional change.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://lore.kernel.org/r/20250517011725.1149510-1-sumanth.gavini@yahoo.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/nova into drm-next
Nova changes for v6.16
auxiliary:
- bus abstractions
- implementation for driver registration
- add sample driver
drm:
- implement __drm_dev_alloc()
- DRM core infrastructure Rust abstractions
- device, driver and registration
- DRM IOCTL
- DRM File
- GEM object
- IntoGEMObject rework
- generically implement AlwaysRefCounted through IntoGEMObject
- refactor unsound from_gem_obj() into as_ref()
- refactor into_gem_obj() into as_raw()
driver-core:
- merge topic/device-context-2025-04-17 from driver-core tree
- implement Devres::access()
- fix: doctest build under `!CONFIG_PCI`
- accessor for Device::parent()
- fix: conditionally expect `dead_code` for `parent()`
- impl TryFrom<&Device> bus devices (PCI, platform)
nova-core:
- remove completed Vec extentions from task list
- register auxiliary device for nova-drm
- derive useful traits for Chipset
- add missing GA100 chipset
- take &Device<Bound> in Gpu::new()
- infrastructure to generate register definitions
- fix register layout of NV_PMC_BOOT_0
- move Firmware into own (Rust) module
- fix: select AUXILIARY_BUS
nova-drm:
- initial driver skeleton (depends on drm and auxiliary bus
abstractions)
- fix: select AUXILIARY_BUS
Rust (dependencies):
- implement Opaque::zeroed()
- implement Revocable::try_access_with()
- implement Revocable::access()
From: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/aCxAf3RqQAXLDhAj@cassiopeiae
|
|
Axel Forsman <axfo@kvaser.com> says:
This patch series fixes a couple of race conditions in the
kvaser_pciefd driver surfaced by enabling MSI interrupts and the new
Kvaser PCIe 8xCAN.
Changes since version 2:
* Rebase onto linux-can/main to resolve del_timer()/timer_delete()
merge conflict.
* Reword 2nd commit message slightly.
Changes since version 1:
* Change type of srb_cmd_reg from "__le32 __iomem *" to
"void __iomem *".
* Maintain TX FIFO count in driver instead of querying HW.
* Stop queue at end of .start_xmit() if full.
Link: https://patch.msgid.link/20250520114332.8961-1-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Going bus-off on a channel doing RX could result in dropped packets.
As netif_running() gets cleared before the channel abort procedure,
the handling of any last RDATA packets would see netif_rx() return
non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt
with this "error" by breaking out of processing the remaining DMA RX
buffer.
Only return an error from kvaser_pciefd_read_buffer() due to packet
corruption, otherwise handle it internally.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-4-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The functions kvaser_pciefd_start_xmit() and
kvaser_pciefd_handle_ack_packet() raced to stop/wake TX queues and
get/put echo skbs, as kvaser_pciefd_can->echo_lock was only ever taken
when transmitting and KCAN_TX_NR_PACKETS_CURRENT gets decremented
prior to handling of ACKs. E.g., this caused the following error:
can_put_echo_skb: BUG! echo_skb 5 is occupied!
Instead, use the synchronization helpers in netdev_queues.h. As those
piggyback on BQL barriers, start updating in-flight packets and bytes
counts as well.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-3-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Avoid the driver missing IRQs by temporarily masking IRQs in the ISR
to enforce an edge even if a different IRQ is signalled before handled
IRQs are cleared.
Fixes: 48f827d4f48f ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR")
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-2-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The non-mmio pinctrl node is not supposed to be inside the soc simple-bus
as dtc points out:
../arch/arm64/boot/dts/rockchip/rk3562.dtsi:1115.20-1181.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property
Move the pinctrl node outside and adapt the indentation.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-7-heiko@sntech.de
|
|
The rk3562 pcie node currently uses the apb register as its unit address
which is the second reg area defined in the binding.
As can be seen by the dtc warnings like
../arch/arm64/boot/dts/rockchip/rk3562.dtsi:624.26-675.5: Warning (simple_bus_reg): /soc/pcie@ff500000: simple-bus unit address format error, expected "fe000000"
using the first reg area as the unit address seems to be preferred.
This is the dbi area per the binding, so adapt the unit address accordingly
and move the nodes to their new position.
With the move also move the reg + reg-names below the compatible, as is the
preferred position.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-6-heiko@sntech.de
|
|
The non-mmio pinctrl node is not supposed to be inside the soc simple-bus
as dtc points out:
../arch/arm64/boot/dts/rockchip/rk3528.dtsi:870.20-936.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property
Move the pinctrl node outside and adapt the indentation.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-5-heiko@sntech.de
|
|
Two empty lines between nodes, is one too many.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-4-heiko@sntech.de
|
|
The non-mmio pinctrl node is not supposed to be inside the soc simple-bus
as dtc points out:
../arch/arm64/boot/dts/rockchip/rk3576.dtsi:2351.20-2417.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property
Move the pinctrl node outside and adapt the indentation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505150745.PQT9TLYX-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-3-heiko@sntech.de
|
|
The rk3576 pcie nodes currently use the apb register as their unit address
which is the second reg area defined in the binding.
As can be seen by the dtc warnings like
../arch/arm64/boot/dts/rockchip/rk3576.dtsi:1346.24-1398.5: Warning (simple_bus_reg): /soc/pcie@2a200000: simple-bus unit address format error, expected "22000000"
../arch/arm64/boot/dts/rockchip/rk3576.dtsi:1400.24-1452.5: Warning (simple_bus_reg): /soc/pcie@2a210000: simple-bus unit address format error, expected "22400000"
using the first reg area as the unit address seems to be preferred.
This is the dbi area per the binding, so adapt the unit address accordingly
and move the nodes to their new position.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505150745.PQT9TLYX-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-2-heiko@sntech.de
|
|
The assigned-clocks and assigned-clock-rates properties were moved from
the scmi_clk node onto cpu nodes in commit
87810bda8a84 ("arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s")
During review of v1 of that patch set, the following comment was made:
why aren't you using OPP tables to define CPU frequencies.
Assigned-clocks looks like a temporary hack because you haven't
done proper OPP tables.
Some time later, proper OPP tables for rk3588 were added in commit
276856db91b4 ("arm64: dts: rockchip: Add OPP data for CPU cores on RK3588")
So this 'temporary hack' is no longer needed.
Dropping it fixes the following dtb validation issues:
cpu@0: Unevaluated properties are not allowed
('assigned-clock-rates', 'assigned-clocks' were unexpected)
cpu@400: Unevaluated properties are not allowed
('assigned-clock-rates', 'assigned-clocks' were unexpected)
cpu@600: Unevaluated properties are not allowed
('assigned-clock-rates', 'assigned-clocks' were unexpected)
Link: https://lore.kernel.org/linux-rockchip/CAL_JsqL_EogoKOQ1xwU75=rJSC4o7yV3Jej4vadtacX2Pt3-hw@mail.gmail.com/
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250519101909.62754-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the power-domains for the RK3576 SFC nodes according to the
TRM part 1. This fixes potential SErrors when accessing the SFC
registers without other peripherals (e.g. eMMC) doing a prior
power-domain enable. For example this is easy to trigger on the
Rock 4D, which enables the SFC0 interface, but does not enable
the eMMC interface at the moment.
Cc: stable@vger.kernel.org
Fixes: 36299757129c8 ("arm64: dts: rockchip: Add SFC nodes for rk3576")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250520-rk3576-fix-fspi-pmdomain-v1-1-f07c6e62dadd@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
We added the documentation in ext4_map_blocks() for usage of
EXT4_GET_BLOCKS_QUERY_LAST_IN_LEAF flag. But It's better to add
a WARN_ON_ONCE in case if anyone tries using this flag with CREATE to
avoid a random issue later. Since depth can change with CREATE and it
needs to be re-calculated before using it in there.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/ee6e82a224c50b432df9ce1ce3333c50182d8473.1747677758.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Now that we have EXT4_EX_QUERY_FILTER mask, let's use that to simplify
the filtering of flags for passing to ext4_ext_map_blocks() in
ext4_map_query_blocks() function. This allows us to kill the query_flags
local variable which is not needed anymore.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/4ae735e83e6f43341e53e2d289e59156a8360134.1747677758.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Rename EXT4_EX_FILTER to EXT4_EX_QUERY_FILTER to better describe its
purpose as a filter mask used specifically in ext4_map_query_blocks().
Add a comment explaining that this macro is used to filter flags needed
when querying the on-disk extent tree.
We will later use EXT4_EX_QUERY_FILTER mask to add another
EXT4_GET_BLOCKS_QUERY needed to lookup in on-disk extent tree.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/51f05d0ba286372eb8693af95bd4b10194b53141.1747677758.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This simplifies the check for last in leaf in ext4_map_query_blocks()
and fixes this cocci warning.
cocci warnings: (new ones prefixed by >>)
>> fs/ext4/inode.c:573:49-51: WARNING !A || A && B is equivalent to !A || B
Fixes: 5bb12b1837c0 ("ext4: Add support for EXT4_GET_BLOCKS_QUERY_LEAF_BLOCKS")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505191524.auftmOwK-lkp@intel.com/
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/5fd5c806218c83f603c578c95997cf7f6da29d74.1747677758.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This fixes the atomic write patch series after it was rebased on top of
extent status cache cleanup series i.e.
'commit 402e38e6b71f57 ("ext4: prevent stale extent cache entries caused by
concurrent I/O writeback")'
After the above series, EXT4_GET_BLOCKS_IO_CONVERT_EXT flag which has
EXT4_GET_BLOCKS_IO_SUBMIT flag set, requires that the io submit context
of any kind should pass EXT4_EX_NOCACHE to avoid caching unncecessary
extents in the extent status cache.
This patch fixes that by adding the EXT4_EX_NOCACHE flag in
ext4_convert_unwritten_extents_atomic() for unwritten to written
conversion calls to ext4_map_blocks().
Fixes: b86629c2b299 ("ext4: Add multi-fsblock atomic write support with bigalloc")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/ea0ad9378ff6d31d73f4e53f87548e3a20817689.1747677758.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The release_tsp() implementations in the TI K3 R5, DSP and M4 remoteproc
drivers release the TI-SCI processor control of a remote processor,
which is auto triggered upon device removal.
Refactor these functions into ti_k3_common.c driver as k3_release_tsp()
and use this common function throughout in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-37-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The reserved_mem_init() implementations in the R5, DSP and M4 remoteproc
drivers initialize the reserved memory regions associated with the
remote processor.
Refactor these functions into the ti_k3_common.c driver as
k3_reserved_mem_init() and use this common function throughout in R5,
DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-36-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The mem_release() implementations in the TI K3 R5, DSP and M4 remoteproc
drivers release the reserved memory of the device, which get auto
triggered upon device removal.
Refactor these functions into ti_k3_common.c driver as k3_mem_release()
and use this common function in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-35-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The of_get_memories() implementations in the TI K3 R5, DSP and M4
remoteproc drivers initialize and assign memory regions used by the
remote processor in the same way. Refactor these implementations into
ti_k3_common.c driver as k3_rproc_of_get_memories() use this common
function for mem initialization in R5, DSP and M4 drivers.
Note: The TCM addresses for R5 core are configurable based on the
'loczrama' setting. Therefore, override the bus_addr assignment done by
the common function for TCMs of R5 remote processors by reading the
'loczrama' DT property in k3_r5_core_of_get_internal_memories().
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-34-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .da_to_va rproc ops implementations in TI K3 R5, DSP and M4
remoteproc drivers return the Kernel virtual address for a
corresponding rproc device address.
Refactor the implementations into the ti_k3_common.c driver as
k3_rproc_da_to_va and use this common function for address translation
of DDR and internal memory regions in R5, DSP and M4 drivers.
Note: The R5 SRAM memory translations are still handled in the .da_to_va
ops of the R5 remoteproc driver.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-33-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .get_loaded_rsc_table rproc ops implementations in TI K3 R5, DSP and
M4 remoteproc drivers return a pointer to the resource table that was
pre-loaded at the base address of the DDR region reserved for firmware
usage.
Refactor the implementations into ti_k3_common.c driver as
k3_get_loaded_rsc_table() and register this common function as
.get_loaded_rsc_table ops in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-32-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .detach rproc ops implementations in TI K3 R5, DSP and M4
remoteproc drivers are NOPs. Refactor the implementations into
ti_k3_common.c driver as k3_rproc_detach() and register this common
function as .detach ops in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-31-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .attach rproc ops implementations in TI K3 R5, DSP and M4 drivers
are NOPs. Refactor the implementations into ti_k3_common.c driver
as k3_rproc_attach() and register this common function as .attach ops in
R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-30-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .stop rproc ops implementations in TI K3 DSP and M4 remoteproc
drivers put the remote processor into reset. Refactor the
implementations into ti_k3_common.c driver as k3_rproc_stop() and
register this common function as .stop ops in DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-29-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The k3_dsp_rproc_start() function sets the boot vector and releases the
reset on the remote processor. Whereas, the k3_m4_rproc_start() function
only needs to release the reset.
Refactor the k3_m4_rproc_start() into ti_k3_common.c as k3_rproc_start()
and align the DSP and M4 drivers to invoke this common function when
releasing the reset on the remote processor.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-28-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .unprepare rproc ops implementations in TI K3 DSP and M4 remoteproc
drivers assert the module reset on the remote processor. Refactor the
implementations into ti_k3_common.c driver as k3_rproc_unprepare() and
register this common function as .unprepare ops in DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-27-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .prepare rproc ops implementations in TI K3 DSP and M4 remoteproc
drivers deasserts the local and module reset of the processor to allow
firmware loading into internal memory.
Refactor the implementations into the ti_k3_common.c driver as
k3_rproc_prepare() and register this common function as .prepare ops in
the DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-26-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The ti_k3_dsp_remoteproc.c driver asserts the local reset in probe
and releases the module reset in .prepare callback. This is done to
ensure the core does not execute bogus code when module reset is
deasserted.
Put both of these operations together in .prepare callback, which is
more suitable as it ensures local reset is asserted for subsequent core
start operations from sysfs. This is done to align the .prepare callback
of DSP with the M4 driver which can be factored out at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-25-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Currently, the driver overrides the rproc ops when booting in IPC-only
mode. Remove these overrides and register the ops unconditionally. This
requires to have IPC-only mode checks in the .prepare and .unprepare ops
and returning early. The other rproc ops are invoked when booting either
in IPC-only mode or in remoteproc mode but not both.
This is done to align the rproc ops implementations of DSP driver with
M4 driver and can be factored out at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-24-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The rproc_request_mbox() implementations in TI K3 R5, DSP and M4
remoteproc drivers acquire the mailbox channel and send the same message
through the acquired channel.
Refactor the above function into the ti_k3_common.c driver as
k3_rproc_request_mbox() and use it throughout R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-23-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The TI K3 M4 remoteproc driver acquires the mailbox channel in probe but
sends a message through the acquired channel later in .attach()/.start()
callbacks.
Put both the things together in the form of 'k3_m4_rproc_request_mbox()'
function and invoke that in the probe routine. This is done to align the
rproc_request_mbox() implementation with R5 and DSP drivers which can be
factored out at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-22-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The rproc_release() implementations in TI K3 DSP and M4 remoteproc
drivers deassert reset in the same way. Refactor the above function into
the ti_k3_common.c driver as k3_rproc_release() and use it throughout
DSP and M4 drivers for releasing the reset from the remote processor.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-21-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Currently, the TI K3 M4 remoteproc driver assumes all of the M4 devices
have local resets. Even though its true for all existing M4 devices,
keep room for future devices which possibly may not have local resets
and only have a module reset.
Therefore introduce a central function, k3_m4_rproc_release() which
handles both type of devices (with and without local resets), and use it
throughout the driver to release the remote processor from reset. Also,
for devices with local reset, Assert the module reset back in case the
local reset deassert operation failed.
This is done to align the reset release implementation with DSP
remoteproc driver and can be factored out later.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-20-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The k3_dsp_rproc_release() function erroneously deasserts the local
reset even for devices which do not support it. Even though it results
in a no-operation, Update the logic to explicitly deassert only the
global reset for devices that do not have a local reset.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-19-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The rproc_reset() implementations in TI K3 DSP and M4 remoteproc drivers
assert reset in the same way. Refactor the above function into the
ti_k3_common.c driver as k3_rproc_reset() and use it throughout DSP and
M4 drivers for resetting the remote processor.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-18-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Currently, the TI K3 M4 remoteproc driver assumes all of the M4 devices
have local resets. Even though its true for all existing M4 devices,
keep room for future devices which possibly may not have local resets
and only have a module reset.
Therefore introduce a central function, k3_m4_rproc_reset() which
handles both type of devices (with and without local resets), and use it
throughout the driver to put the remote processor into reset. This is
done to align the reset implementation with DSP remoteproc driver and
can be factored out later.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-17-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The k3_dsp_rproc_reset() function erroneously asserts the local reset
even for devices which do not support it. Even though it results in a
no-operation, Update the logic to explicitly assert the local reset for
devices that support it and only the global reset for those that do not.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-16-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .kick rproc ops implementations in TI K3 R5, DSP and M4 remoteproc
drivers sends a mailbox message to the remote processor in the same
way. Refactor the implementations into a common function
'k3_rproc_kick()' in the ti_k3_common.c driver.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-15-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The mailbox .rx_callback implementations in TI K3 R5, DSP and M4
remoteproc drivers handle inbound mailbox messages in the same way.
Introduce a common driver 'ti_k3_common.c' and refactor the
implementations into a common function 'k3_rproc_mbox_callback'() in it.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-14-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
