summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-03iwlwifi: add new cards for a000 seriesIhab Zhaika
add four new PCI ID'S for a000 series Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: add new cards for 8265 seriesIhab Zhaika
add two new PCI ID'S for 8265 series Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: add new cards for 8260 seriesIhab Zhaika
add three new PCI ID'S for 8260 series Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: drop RX frames during hardware restartShahar S Matityahu
In case of a hardware restart the BA session data in HW is lost so the reorder buffer simply passes the frames to mac80211 as is as there is no NSSN set. Instead, we will drop these frames before they reach the reorder buffer. mac80211 drops such frames anyway, but we shouldn't rely on that. In addition it saves some processing time Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: mvm: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. The RCU lifetime on baid_data is unclear, so this adds a direct copy of the rcu_ptr passed to the original callback. It may be possible to improve this to just use baid_data->mvm->baid_map[baid_data->baid] instead. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Sara Sharon <sara.sharon@intel.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: mvm: hold mutex when flushing in iwl_mvm_flush_no_vif()Luca Coelho
The iwl_mvm_flush_tx_path() function sends a synchronous command to the firmware. When doing that, we must hold the mutex. The iwl_mvm_flush_no_vif() function was mistakenly not holding the mutex. Fix it. Fixes: 6110d9e5bdd1 ("iwlwifi: mvm: Flush non STA TX queues") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: mvm: add missing implementation of flush for a000 devicesSara Sharon
In the mac flush flow, we should flush all existing queues. Since FW API for a000 devices is flush per RA-TID, simply flush all stations with all tids. From FW perspective, asking to flush a TID that doesn't have a queue is valid, so we can just set all bits in the TID mask. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: mvm: refactor iwl_mvm_flush_no_vifSara Sharon
This function is very indented and hard to read. Refactor it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: fix multi queue notification for a000 devicesSara Sharon
Currently we return early from sync_rx_queues for a000 devices. This may cause, in case of a non-empty reorder buffer, a warning later on since the RX queue isn't getting the notification to empty it. A better approach would be to send the notification for the default queue only. Do this hard coded for now, until we will have the API to enable multi queue for a000 devices. Fixes: bc0294696456 ("iwlwifi: mvm: disable RX queue notification for a000 devices") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: Add more call-sites for pcie reg dumperKirtika Ruchandani
Commit a6d24fad00d9 ("iwlwifi: pcie: dump registers when HW becomes inaccessible") added a function to dump pcie config registers and memory mapped registers on a failure. It is currently only accessible within trans.c. Add it to struct iwl_trans_ops, so that failure cases in other files can call it. While there, add a call to this function from iwl_pcie_load_firmware_chunk in pcie/tx.c, since this is a common failure case seen on some platforms. Signed-off-by: Kirtika Ruchandani <kirtika@chromium.org> [modified the commit message slightly] Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: remove host assisted pagingEmmanuel Grumbach
This was used for internal devices that are now deprecated. All the currently existing devices can do paging without any help from the host. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: remove dead code for internal devices onlyEmmanuel Grumbach
We had a bunch of code that was relevant for internal devices only. Those devices are now being depreceated. Kill all the now unneeded code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: mvm: improve latency when there is a reorder timeoutSara Sharon
When there is a reorder timeout, we may get to a situation where we have the timeout latency for all the next 64 frames. This happens since NSSN is behind for a while, and the driver won't release the frames, since it is not allowed by NSSN. As a result the frame is stored in the reorder buffer although there is no hole, and released 100 ms later. Add a direct comparison to the reorder buffer head, and release immediately if possible. For example: Frame 0 is missed. We receive frame 1, and store it in the buffer. After 100 ms, frame 1 is released and reorder buffer head is 2. We then receive frame 2, with NSSN 0, and store it instead of releasing it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: mvm: rs: remove the ANT C from the toogle antenna logicEmmanuel Grumbach
We don't plan to have products with 3 antennas in the near future. All the rest of the code follows the same assumption as well. Remove the support for antenna C from rs_toggle_ant. When trying to toggle from ANT_B, this avoids to go through ANT_C, discover that it doesn't exist and continue to ANT_A. In MIMO, this avoids to do ANT_AB -> ANT_BC -> ANT_AC and back to ANT_AB. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: mvm: reset seq num after restartLiad Kaufman
After a FW reset on A000 NICs, the driver doesn't set the seq number when re-allocating the queues. This in turn leads to a mismatch between the seq number the driver thinks each frame has, and the actual seq num given by the HW. This especially causes issues with aggregations, since the driver could be waiting to start an aggregation and queue traffic from the mac80211 until then, when actually it shouldn't be waiting. Fixes: 310181ec34e2 ("iwlwifi: move to TVQM mode") Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: mvm: cleanup references to aggregation count limitSara Sharon
Currently the code is mixing defines and is inconsistent. When enabling a queue, we usually configure the scheduler with IWL_FRAME_LIMIT - 64. When sending to firmware the rate scaling, we limit aggregation to LINK_QUAL_AGG_FRAME_LIMIT_DEF - 63, due to a scheduler bug. Given that, clean up the following: - Fix a stray queue enablement with LINK_QUAL_AGG_FRAME_LIMIT_DEF. - Change the comparison that tests if queue needs to be reconfigured to be compared directly to how it was configured. This also saves the redundant round down of the buffer size just for the sake of comparing it, making the code more readable. - Better document gen2 logic Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: mvm: use RS macro instead of duplicating the codeSara Sharon
There is a macro for converting TX response rate to a rate scale value, use it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03tcp: tcp_fragment() should not assume rtx skbsEric Dumazet
While stress testing MTU probing, we had crashes in list_del() that we root-caused to the fact that tcp_fragment() is unconditionally inserting the freshly allocated skb into tsorted_sent_queue list. But this list is supposed to contain skbs that were sent. This was mostly harmless until MTU probing was enabled. Fortunately we can use the tcp_queue enum added later (but in same linux version) for rtx-rb-tree to fix the bug. Fixes: e2080072ed2d ("tcp: new list for sent but unacked skbs for RACK recovery") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Priyaranjan Jha <priyarjha@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03mISDN: hfcpci: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Karsten Keil <isdn@linux-pingi.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Geliang Tang <geliangtang@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03ISDN: eicon: message: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114780 Addresses-Coverity-ID: 114781 Addresses-Coverity-ID: 114782 Addresses-Coverity-ID: 114783 Addresses-Coverity-ID: 114784 Addresses-Coverity-ID: 114785 Addresses-Coverity-ID: 114786 Addresses-Coverity-ID: 114787 Addresses-Coverity-ID: 114788 Addresses-Coverity-ID: 114789 Addresses-Coverity-ID: 114790 Addresses-Coverity-ID: 114791 Addresses-Coverity-ID: 114792 Addresses-Coverity-ID: 114793 Addresses-Coverity-ID: 114794 Addresses-Coverity-ID: 114795 Addresses-Coverity-ID: 200521 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: sched: cls_bpf: use bitwise & rather than logical && on gen_flagsColin Ian King
Currently gen_flags is being operated on by a logical && operator rather than a bitwise & operator. This looks incorrect as these should be bit flag operations. Fix this. Detected by CoverityScan, CID#1460305 ("Logical vs. bitwise operator") Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03tcp: fix a lockdep issue in tcp_fastopen_reset_cipher()Eric Dumazet
icsk_accept_queue.fastopenq.lock is only fully initialized at listen() time. LOCKDEP is not happy if we attempt a spin_lock_bh() on it, because of missing annotation. (Although kernel runs just fine) Lets use net->ipv4.tcp_fastopen_ctx_lock to protect ctx access. Fixes: 1fba70e5b6be ("tcp: socket option to set TCP fast open key") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03bpf: fix verifier NULL pointer dereferenceCraig Gallek
do_check() can fail early without allocating env->cur_state under memory pressure. Syzkaller found the stack below on the linux-next tree because of this. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 27062 Comm: syz-executor5 Not tainted 4.14.0-rc7+ #106 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801c2c74700 task.stack: ffff8801c3e28000 RIP: 0010:free_verifier_state kernel/bpf/verifier.c:347 [inline] RIP: 0010:bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: 0018:ffff8801c3e2f5c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 00000000fffffff4 RCX: 0000000000000000 RDX: 0000000000000070 RSI: ffffffff817d5aa9 RDI: 0000000000000380 RBP: ffff8801c3e2f668 R08: 0000000000000000 R09: 1ffff100387c5d9f R10: 00000000218c4e80 R11: ffffffff85b34380 R12: ffff8801c4dc6a28 R13: 0000000000000000 R14: ffff8801c4dc6a00 R15: ffff8801c4dc6a20 FS: 00007f311079b700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004d4a24 CR3: 00000001cbcd0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bpf_prog_load+0xcbb/0x18e0 kernel/bpf/syscall.c:1166 SYSC_bpf kernel/bpf/syscall.c:1690 [inline] SyS_bpf+0xae9/0x4620 kernel/bpf/syscall.c:1652 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x452869 RSP: 002b:00007f311079abe8 EFLAGS: 00000212 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452869 RDX: 0000000000000030 RSI: 0000000020168000 RDI: 0000000000000005 RBP: 00007f311079aa20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: 00000000004b7550 R13: 00007f311079ab58 R14: 00000000004b7560 R15: 0000000000000000 Code: df 48 c1 ea 03 80 3c 02 00 0f 85 e6 0b 00 00 4d 8b 6e 20 48 b8 00 00 00 00 00 fc ff df 49 8d bd 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b6 0b 00 00 49 8b bd 80 03 00 00 e8 d6 0c 26 RIP: free_verifier_state kernel/bpf/verifier.c:347 [inline] RSP: ffff8801c3e2f5c8 RIP: bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: ffff8801c3e2f5c8 ---[ end trace c8d37f339dc64004 ]--- Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption") Fixes: 1969db47f8d0 ("bpf: fix verifier memory leaks") Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03tipc: eliminate unnecessary probingJon Maloy
The neighbor monitor employs a threshold, default set to 32 peer nodes, where it activates the "Overlapping Neighbor Monitoring" algorithm. Below that threshold, monitoring is full-mesh, and no "domain records" are passed between the nodes. Because of this, a node never received a peer's ack that it has received the most recent update of the own domain. Hence, the field 'acked_gen' in struct tipc_monitor_state remains permamently at zero, whereas the own domain generation is incremented for each added or removed peer. This has the effect that the function tipc_mon_get_state() always sets the field 'probing' in struct tipc_monitor_state true, again leading the tipc_link_timeout() of the link in question to always send out a probe, even when link->silent_intv_count is zero. This is functionally harmless, but leads to some unncessary probing, which can easily be eliminated by setting the 'probing' field of the said struct correctly in such cases. At the same time, we explictly invalidate the sent domain records when the algorithm is not activated. This will eliminate any risk that an invalid domain record might be inadverently accepted by the peer. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: sched: move block offload unbind after all chains are flushedJiri Pirko
Currently, the offload unbind is done before the chains are flushed. That causes driver to unregister block callback before it can get all the callback calls done during flush, leaving the offloaded tps inside the HW. So fix the order to prevent this situation and restore the original behaviour. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Reported-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03cxgb4vf: define get_fecparam ethtool callbackGanesh Goudar
Add support to new ethtool operation get_fecparam to fetch FEC parameters. Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03cxgb4: add new T6 pci device id'sGanesh Goudar
Add 0x6086 T6 device id. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net/ncsi: Make local function ncsi_get_filter() staticWei Yongjun
Fixes the following sparse warnings: net/ncsi/ncsi-manage.c:41:5: warning: symbol 'ncsi_get_filter' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: bridge: Convert timers to use timer_setup()Allen Pais
switch to using the new timer_setup() and from_timer() api's. Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: bridge: Convert timers to use timer_setup()Allen Pais
switch to using the new timer_setup() and from_timer() api's. Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03Merge branch 'mlxsw-Align-multipath-hash-parameters-with-kernels'David S. Miller
Jiri Pirko says: ==================== mlxsw: Align multipath hash parameters with kernel's Ido says: This set makes sure the device is using the same parameters as the kernel when it computes the multipath hash during IP forwarding. First patch adds a new netevent to let interested listeners know that the multipath hash policy has changed. Next two patches do small and non-functional changes in the mlxsw driver. Last patches configure the multipath hash policy upon driver initialization and as a response to netevents. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03mlxsw: spectrum_router: Update multipath hash parameters upon neteventsIdo Schimmel
Make sure the device and the kernel are performing the multipath hash according to the same parameters by updating the device whenever the relevant netevent is generated. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03mlxsw: spectrum_router: Align multipath hash parameters with kernel'sIdo Schimmel
Up until now we used the hardware's defaults for multipath hash computation. This patch aligns the hardware's multipath parameters with the kernel's. For IPv4 packets, the parameters are determined according to the 'fib_multipath_hash_policy' sysctl during module initialization. In case L3-mode is requested, only the source and destination IP addresses are used. There is no special handling of ICMP error packets. In case L4-mode is requested, a 5-tuple is used: source and destination IP addresses, source and destination ports and IP protocol. Note that the layer 4 fields are not considered for fragmented packets. For IPv6 packets, the source and destination IP addresses are used, as well as the flow label and the next header fields. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03mlxsw: reg: Add Router ECMP Configuration Register Version 2Ido Schimmel
The RECRv2 register is used for setting up the router's ECMP hash configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03mlxsw: spectrum_router: Properly name netevent work structIdo Schimmel
The struct containing the work item queued from the netevent handler is named after the only event it is currently used for, which is neighbour updates. Use a more appropriate name for the struct, as we are going to use it for more events. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03mlxsw: spectrum_router: Embed netevent notifier block in router structIdo Schimmel
We are going to need to respond to netevents notifying us about multipath hash updates by configuring the device's hash parameters. Embed the netevent notifier in the router struct so that we could retrieve it upon notifications and use it to configure the device. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03ipv4: Send a netevent whenever multipath hash policy is changedIdo Schimmel
Devices performing IPv4 forwarding need to update their multipath hash policy whenever it is changed. Inform these devices by generating a netevent. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: systemport: Correct IPG length settingsFlorian Fainelli
Due to a documentation mistake, the IPG length was set to 0x12 while it should have been 12 (decimal). This would affect short packet (64B typically) performance since the IPG was bigger than necessary. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03tcp: do not mangle skb->cb[] in tcp_make_synack()Eric Dumazet
Christoph Paasch sent a patch to address the following issue : tcp_make_synack() is leaving some TCP private info in skb->cb[], then send the packet by other means than tcp_transmit_skb() tcp_transmit_skb() makes sure to clear skb->cb[] to not confuse IPv4/IPV6 stacks, but we have no such cleanup for SYNACK. tcp_make_synack() should not use tcp_init_nondata_skb() : tcp_init_nondata_skb() really should be limited to skbs put in write/rtx queues (the ones that are only sent via tcp_transmit_skb()) This patch fixes the issue and should even save few cpu cycles ;) Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03fib: fib_dump_info can no longer use __in_dev_get_rtnlFlorian Westphal
syzbot reported yet another regression added with DOIT_UNLOCKED. When nexthop is marked as dead, fib_dump_info uses __in_dev_get_rtnl(): ./include/linux/inetdevice.h:230 suspicious rcu_dereference_protected() usage! rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor2/23859: #0: (rcu_read_lock){....}, at: [<ffffffff840283f0>] inet_rtm_getroute+0xaa0/0x2d70 net/ipv4/route.c:2738 [..] lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4665 __in_dev_get_rtnl include/linux/inetdevice.h:230 [inline] fib_dump_info+0x1136/0x13d0 net/ipv4/fib_semantics.c:1377 inet_rtm_getroute+0xf97/0x2d70 net/ipv4/route.c:2785 .. This isn't safe anymore, callers either hold RTNL mutex or rcu read lock, so these spots must use rcu_dereference_rtnl() or plain rcu_derefence() (plus unconditional rcu read lock). This does the latter. Fixes: 394f51abb3d04f ("ipv4: route: set ipv4 RTM_GETROUTE to not use rtnl") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03cxgb4: fix error return code in cxgb4_set_hash_filter()Wei Yongjun
Fix to return a negative error code from thecxgb4_alloc_atid() error handling case instead of 0. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-By: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03bpf: fix out-of-bounds access warning in bpf_checkArnd Bergmann
The bpf_verifer_ops array is generated dynamically and may be empty depending on configuration, which then causes an out of bounds access: kernel/bpf/verifier.c: In function 'bpf_check': kernel/bpf/verifier.c:4320:29: error: array subscript is above array bounds [-Werror=array-bounds] This adds a check to the start of the function as a workaround. I would assume that the function is never called in that configuration, so the warning is probably harmless. Fixes: 00176a34d9e2 ("bpf: remove the verifier ops from program structure") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03bpf: fix link error without CONFIG_NETArnd Bergmann
I ran into this link error with the latest net-next plus linux-next trees when networking is disabled: kernel/bpf/verifier.o:(.rodata+0x2958): undefined reference to `tc_cls_act_analyzer_ops' kernel/bpf/verifier.o:(.rodata+0x2970): undefined reference to `xdp_analyzer_ops' It seems that the code was written to deal with varying contents of the arrray, but the actual #ifdef was missing. Both tc_cls_act_analyzer_ops and xdp_analyzer_ops are defined in the core networking code, so adding a check for CONFIG_NET seems appropriate here, and I've verified this with many randconfig builds Fixes: 4f9218aaf8a4 ("bpf: move knowledge about post-translation offsets out of verifier") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: Define eth_stp_addr in linux/etherdevice.hEgil Hjelmeland
The lan9303 driver defines eth_stp_addr as a synonym to eth_reserved_addr_base to get the STP ethernet address 01:80:c2:00:00:00. eth_reserved_addr_base is also used to define the start of Bridge Reserved ethernet address range, which happen to be the STP address. br_dev_setup refer to eth_reserved_addr_base as a definition of STP address. Clean up by: - Move the eth_stp_addr definition to linux/etherdevice.h - Use eth_stp_addr instead of eth_reserved_addr_base in br_dev_setup. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03stmmac: use of_property_read_u32 instead of read_u8Bhadram Varka
Numbers in DT are stored in “cells” which are 32-bits in size. of_property_read_u8 does not work properly because of endianness problem. This causes it to always return 0 with little-endian architectures. Fix it by using of_property_read_u32() OF API. Signed-off-by: Bhadram Varka <vbhadram@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03liquidio: bump up driver version to 1.7.0 to match newer NIC firmwareFelix Manlunas
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03Merge branch 'net-sched-use-after-free'David S. Miller
Cong Wang says: ==================== net_sched: fix a use-after-free for tc actions This patchset fixes a use-after-free reported by Lucas and closes potential races too. Please see each patch for details. ==================== Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net_sched: hold netns refcnt for each actionCong Wang
TC actions have been destroyed asynchronously for a long time, previously in a RCU callback and now in a workqueue. If we don't hold a refcnt for its netns, we could use the per netns data structure, struct tcf_idrinfo, after it has been freed by netns workqueue. Hold refcnt to ensure netns destroy happens after all actions are gone. Fixes: ddf97ccdd7cb ("net_sched: add network namespace support for tc actions") Reported-by: Lucas Bates <lucasb@mojatatu.com> Tested-by: Lucas Bates <lucasb@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net_sched: acquire RTNL in tc_action_net_exit()Cong Wang
I forgot to acquire RTNL in tc_action_net_exit() which leads that action ops->cleanup() is not always called with RTNL. This usually is not a big deal because this function is called after all netns refcnt are gone, but given RTNL protects more than just actions, add it for safety and consistency. Also add an assertion to catch other potential bugs. Fixes: ddf97ccdd7cb ("net_sched: add network namespace support for tc actions") Reported-by: Lucas Bates <lucasb@mojatatu.com> Tested-by: Lucas Bates <lucasb@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03tcp: add tracepoint trace_tcp_retransmit_synack()Song Liu
This tracepoint can be used to trace synack retransmits. It maintains pointer to struct request_sock. We cannot simply reuse trace_tcp_retransmit_skb() here, because the sk here is the LISTEN socket. The IP addresses and ports should be extracted from struct request_sock. Note that, like many other tracepoints, this patch uses IS_ENABLED in TP_fast_assign macro, which triggers sparse warning like: ./include/trace/events/tcp.h:274:1: error: directive in argument list ./include/trace/events/tcp.h:281:1: error: directive in argument list However, there is no good solution to avoid these warnings. To the best of our knowledge, these warnings are harmless. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 20:17:56 +0000