summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-20smp: Allow on_each_cpu() to be called while early_boot_irqs_disabled status ↵Tejun Heo
to init/main.c percpu may end up calling vfree() during early boot which in turn may call on_each_cpu() for TLB flushes. The function of on_each_cpu() can be done safely while IRQ is disabled during early boot but it assumed that the function is always called with local IRQ enabled which ended up enabling local IRQ prematurely during boot and triggering a couple of warnings. This patch updates on_each_cpu() and smp_call_function_many() such on_each_cpu() can be used safely while early_boot_irqs_disabled is set. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110120110713.GC6036@htj.dyndns.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Reported-by: Ingo Molnar <mingo@elte.hu>
2011-01-20lockdep: Move early boot local IRQ enable/disable status to init/main.cTejun Heo
During early boot, local IRQ is disabled until IRQ subsystem is properly initialized. During this time, no one should enable local IRQ and some operations which usually are not allowed with IRQ disabled, e.g. operations which might sleep or require communications with other processors, are allowed. lockdep tracked this with early_boot_irqs_off/on() callbacks. As other subsystems need this information too, move it to init/main.c and make it generally available. While at it, toggle the boolean to early_boot_irqs_disabled instead of enabled so that it can be initialized with %false and %true indicates the exceptional condition. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110120110635.GB6036@htj.dyndns.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-20ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662Anisse Astier
Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-20virtio: remove virtio-pci root deviceMilton Miller
We sometimes need to map between the virtio device and the given pci device. One such use is OS installer that gets the boot pci device from BIOS and needs to find the relevant block device. Since it can't, installation fails. Instead of creating a top-level devices/virtio-pci directory, create each device under the corresponding pci device node. Symlinks to all virtio-pci devices can be found under the pci driver link in bus/pci/drivers/virtio-pci/devices, and all virtio devices under drivers/bus/virtio/devices. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gleb Natapov <gleb@redhat.com> Tested-by: "Daniel P. Berrange" <berrange@redhat.com> Cc: stable@kernel.org
2011-01-20LGUEST_GUEST: fix unmet direct dependencies (VIRTUALIZATION && VIRTIO)Randy Dunlap
Honor the kconfig menu hierarchy to remove kconfig dependency warnings: VIRTIO and VIRTIO_RING are subordinate to VIRTUALIZATION. warning: (LGUEST_GUEST) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION) warning: (LGUEST_GUEST && VIRTIO_PCI && VIRTIO_BALLOON) selects VIRTIO_RING which has unmet direct dependencies (VIRTUALIZATION && VIRTIO) Reported-by: Toralf F_rster <toralf.foerster@gmx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-20lguest: compile fixesRusty Russell
arch/x86/lguest/boot.c: In function ‘lguest_init_IRQ’: arch/x86/lguest/boot.c:824: error: macro "__this_cpu_write" requires 2 arguments, but only 1 given arch/x86/lguest/boot.c:824: error: ‘__this_cpu_write’ undeclared (first use in this function) arch/x86/lguest/boot.c:824: error: (Each undeclared identifier is reported only once arch/x86/lguest/boot.c:824: error: for each function it appears in.) drivers/lguest/x86/core.c: In function ‘copy_in_guest_info’: drivers/lguest/x86/core.c:94: error: lvalue required as left operand of assignment Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-20lguest: Use this_cpu_opsChristoph Lameter
Use this_cpu_ops in a couple of places in lguest. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-20lguest: document --rng in example LauncherPhilip Sanderson
Rusty Russell wrote: > Ah, it will appear as /dev/hwrng. It's a weirdness of Linux that our actual > hardware number generators are not wired up to /dev/random... Reflected this in the documentation, thanks :-) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-20lguest: example launcher to use guard pages, drop PROT_EXEC, fix limit logicPhilip Sanderson
PROT_EXEC seems to be completely unnecessary (as the lguest binary never executes there), and will allow it to work with SELinux (and more importantly, PaX :-) as they can/do forbid writable and executable mappings. Also, map PROT_NONE guard pages at start and end of guest memory for extra paranoia. I changed the length check to addr + size > guest_limit because >= is wrong (addr of 0, size of getpagesize() with a guest_limit of getpagesize() would false positive). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-20lguest: --username and --chroot optionsPhilip Sanderson
I've attached a patch which implements dropping to privileges and chrooting to a directory. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-20ALSA: HDA: Add SKU ignore for another Thinkpad Edge 14David Henningsson
BugLink: http://bugs.launchpad.net/bugs/705323 Thinkpad Edge 14 has one more SSID that suffers from disabled auto-mute. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-19Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Unify "numa=" command line option handling Revert "x86: Make relocatable kernel work with new binutils"
2011-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) sctp: user perfect name for Delayed SACK Timer option net: fix can_checksum_protocol() arguments swap Revert "netlink: test for all flags of the NLM_F_DUMP composite" gianfar: Fix misleading indentation in startup_gfar() net/irda/sh_irda: return to RX mode when TX error net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan. USB CDC NCM: tx_fixup() race condition fix ns83820: Avoid bad pointer deref in ns83820_init_one(). ipv6: Silence privacy extensions initialization bnx2x: Update bnx2x version to 1.62.00-4 bnx2x: Fix AER setting for BCM57712 bnx2x: Fix BCM84823 LED behavior bnx2x: Mark full duplex on some external PHYs bnx2x: Fix BCM8073/BCM8727 microcode loading bnx2x: LED fix for BCM8727 over BCM57712 bnx2x: Common init will be executed only once after POR bnx2x: Swap BCM8073 PHY polarity if required iwlwifi: fix valid chain reading from EEPROM ath5k: fix locking in tx_complete_poll_work ath9k_hw: do PA offset calibration only on longcal interval ...
2011-01-19sctp: user perfect name for Delayed SACK Timer optionShan Wei
The option name of Delayed SACK Timer should be SCTP_DELAYED_SACK, not SCTP_DELAYED_ACK. Left SCTP_DELAYED_ACK be concomitant with SCTP_DELAYED_SACK, for making compatibility with existing applications. Reference: 8.1.19. Get or Set Delayed SACK Timer (SCTP_DELAYED_SACK) （http://tools.ietf.org/html/draft-ietf-tsvwg-sctpsocket-25) Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19net: fix can_checksum_protocol() arguments swapEric Dumazet
commit 0363466866d901fbc (net offloading: Convert checksums to use centrally computed features.) mistakenly swapped can_checksum_protocol() arguments. This broke IPv6 on bnx2 for instance, on NIC without TCPv6 checksum offloads. Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19Revert "netlink: test for all flags of the NLM_F_DUMP composite"David S. Miller
This reverts commit 0ab03c2b1478f2438d2c80204f7fef65b1bca9cf. It breaks several things including the avahi daemon. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19cifs: Use mask of ACEs for SID Everyone to calculate all three permissions ↵Shirish Pargaonkar
user, group, and other If a DACL has entries for ACEs for SID Everyone and Authenticated Users, factor in mask in respective entries during calculation of permissions for all three, user, group, and other. http://technet.microsoft.com/en-us/library/bb463216.aspx Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: Fix regression during share-level security mounts (Repost)Shirish Pargaonkar
NTLM response length was changed to 16 bytes instead of 24 bytes that are sent in Tree Connection Request during share-level security share mounts. Revert it back to 24 bytes. Reported-and-Tested-by: Grzegorz Ozanski <grzegorz.ozanski@intel.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Suresh Jayaraman <sjayaraman@suse.de> Cc: stable@kernel.org Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19[CIFS] Update cifs version numberSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: move mid result processing into common functionJeff Layton
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: move locked sections out of DeleteMidQEntry and AllocMidQEntryJeff Layton
In later patches, we're going to need to have finer-grained control over the addition and removal of these structs from the pending_mid_q and we'll need to be able to call the destructor while holding the spinlock. Move the locked sections out of both routines and into the callers. Fix up current callers of DeleteMidQEntry to call a new routine that dequeues the entry and then destroys it. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: clean up accesses to midCountJeff Layton
It's an atomic_t and the code accesses the "counter" field in it directly instead of using atomic_read(). It also is sometimes accessed under a spinlock and sometimes not. Move it out of the spinlock since we don't need belt-and-suspenders for something that's just informational. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: make wait_for_free_request take a TCP_Server_Info pointerJeff Layton
The cifsSesInfo pointer is only used to get at the server. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: no need to mark smb_ses_list as cifs_demultiplex_thread is exitingJeff Layton
The TCP_Server_Info is refcounted and every SMB session holds a reference to it. Thus, smb_ses_list is always going to be empty when cifsd is coming down. This is dead code. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: don't fail writepages on -EAGAIN errorsJeff Layton
If CIFSSMBWrite2 returns -EAGAIN, then the error should be considered temporary. CIFS should retry the write instead of setting an error on the mapping and returning. For WB_SYNC_ALL, just retry the write immediately. In the WB_SYNC_NONE case, call redirty_page_for_writeback on all of the pages that didn't get written out and then move on. Also, fix up the handling of a short write with a successful return code. MS-CIFS says that 0 bytes_written means ENOSPC or EFBIG. It doesn't mention what a short, but non-zero write means, so for now treat it as we would an -EAGAIN return. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19CIFS: Fix oplock break handling (try #2)Pavel Shilovsky
When we get oplock break notification we should set the appropriate value of OplockLevel field in oplock break acknowledge according to the oplock level held by the client in this time. As we only can have level II oplock or no oplock in the case of oplock break, we should be aware only about clientCanCacheRead field in cifsInodeInfo structure. Also fix bug connected with wrong interpretation of OplockLevel field during oplock break notification processing. Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19ALSA: hda - Fix "unused variable" compile warningTakashi Iwai
sound/pci/hda/patch_realtek.c: In function ‘alc_apply_fixup’: sound/pci/hda/patch_realtek.c:1724:14: warning: unused variable ‘modelname’ snd_printdd() is evaluated only when CONFIG_SND_DEBUG_VERBOSE=y. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-19powerpc/83xx: fix build failures on dt compatible list.Grant Likely
Commit a4f740cf, "of/flattree: Add of_flat_dt_match() helper function" introduced build failures in arch/powerpc/platform/83xx by mistyping 'static' as 'struct' in the compatible string list, and omitting a few semicolons. This patch fixes it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-19ALSA: hda - Add quirk for HP Z-series workstationTakashi Iwai
It seems working well with model=hp-bpc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-19[media] staging/lirc: fix mem leaks and ptr err usageJarod Wilson
When the lirc drivers were converted over to using memdup_user, I mistakenly also removed corresponding calls to kfree. Add those back. I also screwed up on the allocation error check in lirc_serial, using if (PTR_ERR()) instead of if (IS_ERR()), which broke transmit. Reported-by: Jiri Fojtasek <jiri.fojtasek@hlohovec.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] hdpvr: reduce latency of i2c read/write w/recycled bufferJarod Wilson
The current hdpvr code kmalloc's a new buffer for every i2c read and write. Rather than do that, lets allocate a buffer in the driver's device struct and just use that every time. The size I've chosen for the buffer is the maximum size I could ascertain might be used by either ir-kbd-i2c or lirc_zilog, plus a bit of padding (lirc_zilog may use up to 100 bytes on tx, rounded that up to 128). Note that this might also remedy user reports of very sluggish behavior of IR receive with hdpvr hardware. v2: make sure (len <= (dev->i2c_buf)) [Jean Delvare] Reported-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] hdpvr: enable IR partJarod Wilson
A number of things going on here, but the end result is that the IR part on the hdpvr gets enabled, and can be used with ir-kbd-i2c and/or lirc_zilog. First up, there are some conditional build fixes that come into play whether i2c is built-in or modular. Second, we're swapping out i2c_new_probed_device() for i2c_new_device(), as in my testing, probing always fails, but we *know* that all hdpvr devices have a z8 chip at 0x70 and 0x71. Third, we're poking at an i2c address directly without a client, and writing some magic bits to actually turn on this IR part (this could use some improvement in the future). Fourth, some of the i2c_adapter storage has been reworked, as the existing implementation used to lead to an oops following i2c changes c. 2.6.31. Earlier editions of this patch have been floating around the 'net for a while, including being patched into Fedora kernels, and they *do* work. This specific version isn't yet tested, beyond loading ir-kbd-i2c and confirming that it does bind to the RX address of the hdpvr. [mchehab@redhat.com: I2C_CLASS_TV_ANALOG is not defined. Fix compilation bug] Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] rc/mceusb: timeout should be in ns, not usJarod Wilson
Fixes an egregious bug in mceusb driver, where the receiver was being put into idle mode far sooner than it should have, thanks to storing a timeout value that in us where it should be ns. Basically, the receiver kept going into idle mode before a trailing space had been fully received, which was causing problems for some protocols, most notably manifesting as lirc userspace never receiving a trailing space for any rc5 signals. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l2-device: fix 'use-after-freed' oopsHans Verkuil
Fix a bug in v4l2_device_unregister where the sd pointer can be dereferenced after it was freed. Normally the i2c adapter is removed before this function is called. Removing the adapter will also unregister all subdevs on that adapter, so generally v4l2_device_unregister has nothing to do. However, in the case of a platform i2c bus that bus is generally not freed. In that case, after freeing the i2c subdevice the code will fall into the second block when it tests if the subdev is a SPI device. But by that time the subdev is already freed and the kernel oopses. The fix is trivial: continue with the loop after freeing the i2c or spi subdevice. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reported-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l2-dev: don't memset video_device.devHans Verkuil
Zeroing video_device.dev causes a memory leak if video_set_drvdata was called before video_register_device was called. video_set_drvdata calls dev_set_drvdata which allocates video_device.dev.p. memsetting this will prevent freeing of that memory. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] zoran: use video_device_alloc instead of kmallocHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] w9966: zero device state after a detachHans Verkuil
After a detach zero the whole device state to ensure a clean slate on the next attach. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l: Fix a use-before-set in the control frameworkLaurent Pinchart
v4l2_queryctrl sets the step value based on the control type. That would be fine if it used the control type stored in the V4L2 kernel control object, not the one stored in the userspace ioctl structure that has just been memset to 0. Fix this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.hLaurent Pinchart
The later makes extensive use of structures defined in the former. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] DocBook/v4l: update V4L2 revision and update copyright yearsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] DocBook/v4l: fix validation error in dev-rds.xmlHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l2-ctrls: queryctrl shouldn't attempt to replace ↵Hans Verkuil
V4L2_CID_PRIVATE_BASE IDs When queryctrl is called with a V4L2_CID_PRIVATE_BASE control ID, then currently it is replaced by the real internal ID. This is not according to the spec so keep the V4L2_CID_PRIVATE_BASE ID in this case. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l2-ctrls: fix missing 'read-only' checkHans Verkuil
VIDIOC_S_CTRL did not check against read-only controls. Even worse, for controls of type CTRL_CLASS it would cause a kernel oops since those controls do not have a s_ctrl op. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] pvrusb2: Provide more information about IR units to lirc_zilog and ↵Andy Walls
ir-kbd-i2c When registering an IR Rx device with the I2C subsystem, provide more detailed information about the IR device and default remote configuration for the IR driver modules. Also explicitly register any IR Tx device with the I2C subsystem. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71Andy Walls
This reverts a portion of commit 44243fc2ef99948bc9b046901880885616dd5e89 A commit for which I errantly recommended that defaults for I2C address 0x71 not be set by ir-kbd-i2c.c The pvrusb2 and bttv drivers currently rely on ir-kbd-i2c setting defaults for that address. Until I can get those bridge drivers fixed to properly send IR_i2c_init_data for boards with Zilog Z8 chips, just add back the default settings for I2C address 0x71. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Update TODO.lirc_zilogAndy Walls
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Add Andy Walls to copyright notice and authors listAndy Walls
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Remove useless struct i2c_driver.command functionAndy Walls
The ir_command() function is a do-nothing stub; remove it. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Remove unneeded tests for existence of the IR Tx functionAndy Walls
The driver is now structured so that it must handle an IR Tx unit for a Z8 IR chip, or it refuses to handle that Z8 IR chip. This allows us to assume that ir->tx != NULL in a few places in the driver, and also allows us to always report Tx is available to userspace. Get rid of unneeded tests for ir->tx == NULL and always report that Tx is available. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Update IR Rx polling kthread start/stop and some printksAndy Walls
The IR Rx polling thread was originally a kernel_thread long ago, and had only been minimally converted to a kthread. This patch finishes that conversion by - cleaning up all the unneeded completions - destroying the kthread properly by calling kthread_stop() - changing lirc_thread() to test kthread_should_stop() just before every point where it may sleep - reorganizing the lirc_thread() function so it uses fewer lines - modifying the name of the kthread from "lirc_zilog" to "zilog-rx-i2c-N", so ps will show which kthread polls which Zilog Z8 IR unit. Also some minor tweaks were made to logging emitted by the ir_probe() function. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 09:45:09 +0000