summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-22KVM: SVM: fix emulation of msr reads/writes of MSR_FS_BASE and MSR_GS_BASEMaxim Levitsky
If these msrs are read by the emulator (e.g due to 'force emulation' prefix), SVM code currently fails to extract the corresponding segment bases, and return them to the emulator. Fix that. Cc: stable@vger.kernel.org Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Link: https://lore.kernel.org/r/20240802151608.72896-3-mlevitsk@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-08-22KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTSSean Christopherson
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX reads guest memory. Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN via sync_regs(), which already holds SRCU. I.e. trying to precisely use kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause problems. Acquiring SRCU isn't all that expensive, so for simplicity, grab it unconditionally for KVM_SET_VCPU_EVENTS. ============================= WARNING: suspicious RCU usage 6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted ----------------------------- include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by repro/1071: #0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm] stack backtrace: CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x7f/0x90 lockdep_rcu_suspicious+0x13f/0x1a0 kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm] kvm_vcpu_read_guest+0x3e/0x90 [kvm] nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel] load_vmcs12_host_state+0x432/0xb40 [kvm_intel] vmx_leave_nested+0x30/0x40 [kvm_intel] kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm] kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm] ? mark_held_locks+0x49/0x70 ? kvm_vcpu_ioctl+0x7d/0x970 [kvm] ? kvm_vcpu_ioctl+0x497/0x970 [kvm] kvm_vcpu_ioctl+0x497/0x970 [kvm] ? lock_acquire+0xba/0x2d0 ? find_held_lock+0x2b/0x80 ? do_user_addr_fault+0x40c/0x6f0 ? lock_release+0xb7/0x270 __x64_sys_ioctl+0x82/0xb0 do_syscall_64+0x6c/0x170 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7ff11eb1b539 </TASK> Fixes: f7e570780efc ("KVM: x86: Forcibly leave nested virt when SMM state is toggled") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240723232055.3643811-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-08-22KVM: x86/mmu: Check that root is valid/loaded when pre-faulting SPTEsSean Christopherson
Error out if kvm_mmu_reload() fails when pre-faulting memory, as trying to fault-in SPTEs will fail miserably due to root.hpa pointing at garbage. Note, kvm_mmu_reload() can return -EIO and thus trigger the WARN on -EIO in kvm_vcpu_pre_fault_memory(), but all such paths also WARN, i.e. the WARN isn't user-triggerable and won't run afoul of warn-on-panic because the kernel would already be panicking. BUG: unable to handle page fault for address: 000029ffffffffe8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP CPU: 22 PID: 1069 Comm: pre_fault_memor Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #548 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:is_page_fault_stale+0x3e/0xe0 [kvm] RSP: 0018:ffffc9000114bd48 EFLAGS: 00010206 RAX: 00003fffffffffc0 RBX: ffff88810a07c080 RCX: ffffc9000114bd78 RDX: ffff88810a07c080 RSI: ffffea0000000000 RDI: ffff88810a07c080 RBP: ffffc9000114bd78 R08: 00007fa3c8c00000 R09: 8000000000000225 R10: ffffea00043d7d80 R11: 0000000000000000 R12: ffff88810a07c080 R13: 0000000100000000 R14: ffffc9000114be58 R15: 0000000000000000 FS: 00007fa3c9da0740(0000) GS:ffff888277d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000029ffffffffe8 CR3: 000000011d698000 CR4: 0000000000352eb0 Call Trace: <TASK> kvm_tdp_page_fault+0xcc/0x160 [kvm] kvm_mmu_do_page_fault+0xfb/0x1f0 [kvm] kvm_arch_vcpu_pre_fault_memory+0xd0/0x1a0 [kvm] kvm_vcpu_ioctl+0x761/0x8c0 [kvm] __x64_sys_ioctl+0x82/0xb0 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Modules linked in: kvm_intel kvm CR2: 000029ffffffffe8 ---[ end trace 0000000000000000 ]--- Fixes: 6e01b7601dfe ("KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()") Reported-by: syzbot+23786faffb695f17edaa@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/0000000000002b84dc061dd73544@google.com Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: xingwei lee <xrivendell7@gmail.com> Tested-by: yuxin wang <wang1315768607@163.com> Link: https://lore.kernel.org/r/20240723000211.3352304-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-08-22KVM: x86/mmu: Fixup comments missed by the REMOVED_SPTE=>FROZEN_SPTE renameYan Zhao
Replace "removed" with "frozen" in comments as appropriate to complete the rename of REMOVED_SPTE to FROZEN_SPTE. Fixes: 964cea817196 ("KVM: x86/tdp_mmu: Rename REMOVED_SPTE to FROZEN_SPTE") Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Link: https://lore.kernel.org/r/20240712233438.518591-1-rick.p.edgecombe@intel.com [sean: write changelog] Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-08-22drm/xe: Fix missing runtime outer protection for ggtt_remove_nodeRodrigo Vivi
Defer the ggtt node removal to a thread if runtime_pm is not active. The ggtt node removal can be called from multiple places, including places where we cannot protect with outer callers and places we are within other locks. So, try to grab the runtime reference if the device is already active, otherwise defer the removal to a separate thread from where we are sure we can wake the device up. v2: - use xe wq instead of system wq (Matt and CI) - Avoid GFP_KERNEL to be future proof since this removal can be called from outside our drivers and we don't want to block if atomic is needed. (Brost) v3: amend forgot chunk declaring xe_device. v4: Use a xe_ggtt_region to encapsulate the node and remova info, wihtout the need for any memory allocation at runtime. v5: Actually fill the delayed_removal.invalidate (Brost) v6: - Ensure that ggtt_region is not freed before work finishes (Auld) - Own wq to ensures that the queued works are flushed before ggtt_fini (Brost) v7: also free ggtt_region on early !bound return (Auld) v8: Address the null deref (CI) v9: Based on the new xe_ggtt_node for the proper care of the lifetime of the object. v10: Redo the lost v5 change. (Brost) v11: Simplify the invalidate_on_remove (Lucas) Cc: Matthew Auld <matthew.auld@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Francois Dugast <francois.dugast@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-12-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Make xe_ggtt_node struct independentRodrigo Vivi
In some rare cases, the drm_mm node cannot be removed synchronously due to runtime PM conditions. In this situation, the node removal will be delegated to a workqueue that will be able to wake up the device before removing the node. However, in this situation, the lifetime of the xe_ggtt_node cannot be restricted to the lifetime of the parent object. So, this patch introduces the infrastructure so the xe_ggtt_node struct can be allocated in advance and freed when needed. By having the ggtt backpointer, it also ensure that the init function is always called before any attempt to insert or reserve the node in the GGTT. v2: s/xe_ggtt_node_force_fini/xe_ggtt_node_fini and use it internaly (Brost) v3: - Use GF_NOFS for node allocation (CI) - Avoid ggtt argument, now that we have it inside the node (Lucas) - Fix some missed fini cases (CI) v4: - Fix SRIOV critical case where config->ggtt_region was lost (Michal) - Avoid ggtt argument also on removal (missed case on v3) (Michal) - Remove useless checks (Michal) - Return 0 instead of negative errno on a u32 addr. (Michal) - s/xe_ggtt_assign/xe_ggtt_node_assign for coherence, while we are touching it (Michal) v5: - Fix VFs' ggtt_balloon Cc: Matthew Auld <matthew.auld@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-11-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Refactor xe_ggtt balloon functions to make the node clearRodrigo Vivi
These operations are related to node. Convert them to the new appropriate name space xe_ggtt_node. v2: Also move arguments around for consistency (Lucas). v3: s/node_balloon/node_insert_balloon and s/node_deballoon/node_remove_balloon (Michal). Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-10-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Introduce xe_ggtt_print_holesRodrigo Vivi
Introduce a new xe_ggtt_print_holes helper that attends the SRIOV demand and finishes the goal of limiting drm_mm access to xe_ggtt. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-9-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Introduce xe_ggtt_largest_holeRodrigo Vivi
Introduce a new xe_ggtt_largest_hole helper that attends the SRIOV demand and continue with the goal of limiting drm_mm access to xe_ggtt. v2: Fix a typo (Michal) Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-8-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Limit drm_mm_node_allocated access to xe_ggtt_nodeRodrigo Vivi
Continue with the encapsulation of drm_mm_node inside xe_ggtt. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-7-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Rename xe_ggtt_node related functionsRodrigo Vivi
Bring some consistency and prepare for more xe_ggtt_node related functions to be introduced. Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-6-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Encapsulate drm_mm_node inside xe_ggtt_nodeRodrigo Vivi
The xe_ggtt component uses drm_mm to manage the GGTT. The drm_mm_node is just a node inside drm_mm, but in Xe we use that only in the GGTT context. So, this patch encapsulates the drm_mm_node into a xe_ggtt's new struct. This is the first step towards limiting all the drm_mm access through xe_ggtt. The ultimate goal is to have a better control of the node insertion and removal, so the removal can be delegated to a delayed workqueue. v2: Fix includes and typos (Michal and Brost) Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-5-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/{i915, xe}: Avoid direct inspection of dpt_vma from outside dptRodrigo Vivi
DPT code is so dependent on i915 vma implementation and it is not ported yet to Xe. This patch limits inspection to DPT's VMA struct to intel_dpt component only, so the Xe GGTT code can evolve. Cc: Matthew Brost <matthew.brost@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-4-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Remove unnecessary drm_mm.h includesRodrigo Vivi
These includes are no longer necessary, and where appropriate are replaced by the linux/types.h one. Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-3-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Introduce GGTT documentationRodrigo Vivi
Document xe_ggtt and ensure it is part of the built kernel docs. v2: - Accepted all Michal's suggestions - Rebased on top of new set_pte per platform/wa function pointer v3: - Typos and other acronym fixes (Michal) Cc: Matthew Brost <matthew.brost@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> #v1 Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-2-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-22drm/xe: Removed unused xe_ggtt_printkRodrigo Vivi
Apparently this was only useful when enabling ggtt support for the very first time and never used again. It is also not useful now that we have the ggtt_dump available through debugfs. Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-23kbuild: fix typos "prequisites" to "prerequisites"Masahiro Yamada
This typo in scripts/Makefile.build has been present for more than 20 years. It was accidentally copy-pasted to other scripts/Makefile.* files. Fix them all. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2024-08-22smb: client: ignore unhandled reparse tagsPaulo Alcantara
Just ignore reparse points that the client can't parse rather than bailing out and not opening the file or directory. Reported-by: Marc <1marc1@gmail.com> Closes: https://lore.kernel.org/r/CAMHwNVv-B+Q6wa0FEXrAuzdchzcJRsPKDDRrNaYZJd6X-+iJzw@mail.gmail.com Fixes: 539aad7f14da ("smb: client: introduce ->parse_reparse_point()") Tested-by: Anthony Nandaa (Microsoft) <profnandaa@gmail.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-08-22smb3: fix problem unloading module due to leaked refcount on shutdownSteve French
The shutdown ioctl can leak a refcount on the tlink which can prevent rmmod (unloading the cifs.ko) module from working. Found while debugging xfstest generic/043 Fixes: 69ca1f57555f ("smb3: add dynamic tracepoints for shutdown ioctl") Reviewed-by: Meetakshi Setiya <msetiya@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-08-22s390/boot: Fix KASLR base offset off by __START_KERNEL bytesAlexander Gordeev
Symbol offsets to the KASLR base do not match symbol address in the vmlinux image. That is the result of setting the KASLR base to the beginning of .text section as result of an optimization. Revert that optimization and allocate virtual memory for the whole kernel image including __START_KERNEL bytes as per the linker script. That allows keeping the semantics of the KASLR base offset in sync with other architectures. Rename __START_KERNEL to TEXT_OFFSET, since it represents the offset of the .text section within the kernel image, rather than a virtual address. Still skip mapping TEXT_OFFSET bytes to save memory on pgtables and provoke exceptions in case an attempt to access this area is made, as no kernel symbol may reside there. In case CONFIG_KASAN is enabled the location counter might exceed the value of TEXT_OFFSET, while the decompressor linker script forcefully resets it to TEXT_OFFSET, which leads to a sections overlap link failure. Use MAX() expression to avoid that. Reported-by: Omar Sandoval <osandov@osandov.com> Closes: https://lore.kernel.org/linux-s390/ZnS8dycxhtXBZVky@telecaster.dhcp.thefacebook.com/ Fixes: 56b1069c40c7 ("s390/boot: Rework deployment of the kernel image") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-08-22s390/boot: Avoid possible physmem_info segment corruptionAlexander Gordeev
When physical memory for the kernel image is allocated it does not consider extra memory required for offsetting the image start to match it with the lower 20 bits of KASLR virtual base address. That might lead to kernel access beyond its memory range. Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Fixes: 693d41f7c938 ("s390/mm: Restore mapping of kernel image using large pages") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-08-22ASoC: cs-amp-lib: Ignore empty UEFI calibration entriesRichard Fitzgerald
If the timestamp of a calibration entry is 0 it is an unused entry and must be ignored. Some end-products reserve EFI space for calibration entries by shipping with a zero-filled EFI file. When searching the file for calibration data the driver must skip the empty entries. The timestamp of a valid entry is always non-zero. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 1cad8725f2b9 ("ASoC: cs-amp-lib: Add helpers for factory calibration data") Link: https://patch.msgid.link/20240822133544.304421-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-22smb/server: update misguided comment of smb2_allocate_rsp_buf()ChenXiaoSong
smb2_allocate_rsp_buf() will return other error code except -ENOMEM. Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-08-22smb/server: remove useless assignment of 'file_present' in smb2_open()ChenXiaoSong
The variable is already true here. Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-08-22smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open()ChenXiaoSong
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE) and parse_lease_state() return NULL. Fix this by check if 'lease_ctx_info' is NULL. Additionally, remove the redundant parentheses in parse_durable_handle_context(). Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-08-22smb/server: fix return value of smb2_open()ChenXiaoSong
In most error cases, error code is not returned in smb2_open(), __process_request() will not print error message. Fix this by returning the correct value at the end of smb2_open(). Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-08-22ksmbd: the buffer of smb2 query dir response has at least 1 byteNamjae Jeon
When STATUS_NO_MORE_FILES status is set to smb2 query dir response, ->StructureSize is set to 9, which mean buffer has 1 byte. This issue occurs because ->Buffer[1] in smb2_query_directory_rsp to flex-array. Fixes: eb3e28c1e89b ("smb3: Replace smb2pdu 1-element arrays with flex-arrays") Cc: stable@vger.kernel.org # v6.1+ Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-08-22bcachefs: don't use rht_bucket() in btree_key_cache_scan()Kent Overstreet
rht_bucket() does strange complicated things when a rehash is in progress. Instead, just skip scanning when a rehash is in progress: scanning is going to be more expensive (many more empty slots to cover), and some sort of infinite loop is being observed Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-08-22bcachefs: add missing inode_walker_exit()Kent Overstreet
fix a small leak Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-08-22Merge branch 'maintainers-networking-updates'Paolo Abeni
Simon Horman says: ==================== MAINTAINERS: Networking updates This series includes Networking-related updates to MAINTAINERS. * Patches 1-4 aim to assign header files with "*net*' and '*skbuff*' in their name to Networking-related sections within Maintainers. There are a few such files left over after this patches. I have to sent separate patches to add them to SCSI SUBSYSTEM and NETWORKING DRIVERS (WIRELESS) sections [1][2]. [1] https://lore.kernel.org/linux-scsi/20240816-scsi-mnt-v1-1-439af8b1c28b@kernel.org/ [2] https://lore.kernel.org/linux-wireless/20240816-wifi-mnt-v1-1-3fb3bf5d44aa@kernel.org/ * Patch 5 updates the status of the JME driver to 'Odd Fixes' ==================== Link: https://patch.msgid.link/20240821-net-mnt-v2-0-59a5af38e69d@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Mark JME Network Driver as Odd FixesSimon Horman
This driver only appears to have received sporadic clean-ups, typically part of some tree-wide activity, and fixes for quite some time. And according to the maintainer, Guo-Fu Tseng, the device has been EOLed for a long time (see Link). Accordingly, it seems appropriate to mark this driver as odd fixes. Cc: Moon Yeounsu <yyyynoom@gmail.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Link: https://lore.kernel.org/netdev/20240805003139.M94125@cooldavid.org/ Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add header files to NETWORKING sectionsSimon Horman
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" or "skbuff" in their name. This patch adds a number of such files to the NETWORKING DRIVERS and NETWORKING [GENERAL] sections. Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add limited globs for Networking headersSimon Horman
This aims to add limited globs to improve the coverage of header files in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections. It is done so in a minimal way to exclude overlap with other sections. And so as not to require "X" entries to exclude files otherwise matched by these new globs. While imperfect, due to it's limited nature, this does extend coverage of header files by these sections. And aims to automatically cover new files that seem very likely belong to these sections. The include/linux/netdev* glob (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdevice_xmit.h - include/linux/netdev_features.h The include/uapi/linux/netdev* globs: (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdev.h The include/linux/skbuff* glob (NETWORKING [GENERAL] section only): + Subsumes the entry for: - include/linux/skbuff.h + Extends the section to cover - include/linux/skbuff_ref.h A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL] section. Although it would subsume the entry for include/uapi/linux/net_namespace.h, which is fine, it would also extend coverage to: - include/uapi/linux/net_dropmon.h, which belongs to the NETWORK DROP MONITOR section - include/uapi/linux/net_tstamp.h which, as per an earlier patch in this series, belongs to the SOCKET TIMESTAMPING section Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING sectionSimon Horman
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add sonet.h to ATM section of MAINTAINERSSimon Horman
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. It seems that sonet.h is included in ATM related source files, and thus that ATM is the most relevant section for these files. Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22powerpc/mm: Fix return type of pgd_val()Christophe Leroy
Commit 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)") switched PGD entries to 64 bits, but pgd_val() returns an unsigned long which is 32 bits on PPC32. This is not a problem for regular PMD entries because the upper part is always NULL, but when PMD entries are leaf they contain 64 bits values, so pgd_val() must return an unsigned long long instead of an unsigned long. Also change the condition to CONFIG_PPC_85xx instead of CONFIG_PPC_E500 as the change was meant for 32 bits only. Allthough this should be harmless on PPC64, it generates a warning with pgd_ERROR print. Fixes: 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/45f8fdf298ec3df7573b66d21b03a5cda92e2cb1.1724313510.git.christophe.leroy@csgroup.eu
2024-08-22powerpc/vdso: Don't discard rela sectionsChristophe Leroy
After building the VDSO, there is a verification that it contains no dynamic relocation, see commit aff69273af61 ("vdso: Improve cmd_vdso_check to check all dynamic relocations"). This verification uses readelf -r and doesn't work if rela sections are discarded. Fixes: 8ad57add77d3 ("powerpc/build: vdso linker warning for orphan sections") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/45c3e6fc76cad05ad2cac0f5b5dfb4fae86dc9d6.1724153239.git.christophe.leroy@csgroup.eu
2024-08-22powerpc/64e: Define mmu_pte_psize staticChristophe Leroy
mmu_pte_psize is only used in the tlb_64e.c, define it static. Fixes: 25d21ad6e799 ("powerpc: Add TLB management code for 64-bit Book3E") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408011256.1O99IB0s-lkp@intel.com/ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/beb30d280eaa5d857c38a0834b147dffd6b28aa9.1724157750.git.christophe.leroy@csgroup.eu
2024-08-22drm/xe: remove display stepping handlingJani Nikula
The code is now unused. Remove. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/19bc7a3197f2bc6f3c0d337487ab19f3b7f5612a.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915: remove display stepping handlingJani Nikula
The code is now unused. Remove. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d64c5e8563dcb8858569d5578230f6b675acdafb.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915/display: switch to display detected steppingsJani Nikula
Move the stepping related macros over to display. We can proceed to remove the compat macros from xe. Note: Looks like we've failed to actually initialize the display stepping for GMD ID based platforms in the xe driver. It does get set in display runtime info, but until now the compat macro used xe->info.step.display which was not set for GMD ID. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ce8bb94e1a801d3c345f1810837bdd1964c3af75.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915/display: identify display steppings in display probeJani Nikula
Both i915 and xe have code to identify display steppings. Start deduplicating this by, uh, adding a third copy in display code. This is not yet used for anything other than debug logging. We'll switch over later. For platforms before GMD ID, attach the mapping from PCI revision to stepping in the platform and subplatform descriptors. This is a considerably cleaner approach than having it completely separate. Also add a separate field for stepping in display runtime info, preserving the value from GMD ID. v2: Handle NULL subdesc (Matt) Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821095036.2044654-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915/display: rename IS_DISPLAY_IP_STEP() to IS_DISPLAY_VER_STEP()Jani Nikula
Unify macro naming on VER. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6861e02f3adf15d56e89890000eb195070c33c9b.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/i915/display: rename IS_DISPLAY_IP_RANGE() to IS_DISPLAY_VER_FULL()Jani Nikula
Unify macro naming. Be more in line with DISPLAY_VER() and IS_DISPLAY_VER(). Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/adb43f45ad0b1846c2cb9a5861ba1f727c41ae83.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/xe/step: define more steppings E-JJani Nikula
These are primarily needed for compat reasons with display code in upcoming changes. There's no harm in having them. While at it, add a comment about the requirement to match against GMD ID value spacing. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/88074394509d4849f8ec6ab5776394b961032cd0.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/xe/display: remove the unused compat HAS_GMD_ID()Jani Nikula
The display code no longer needs or uses HAS_GMD_ID(). Remove it from the compat header. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/67571bb0b10fb5c99dba57757f2213ef39bdedbb.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/xe/display: remove intel_display_step_name() to simplifyJani Nikula
The intel_display_step_name() is an unnecessary extra indirection. Simplify by just adding a macro to map intel_step_name() to xe_step_name(). We'll need to temporarily add a compat INTEL_DISPLAY_STEP() for this. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/cbea7def331cc9d2438da49ae344b9987f27cd12.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22drm/xe/display: fix compat IS_DISPLAY_STEP() range endJani Nikula
It's supposed to be an open range at the end like in i915. Fingers crossed that nobody relies on this definition. Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fe8743770694e429f6902491cdb306c97bdf701a.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-22ASoC: cs-amp-lib-test: Force test calibration blob entries to be validRichard Fitzgerald
For a normal calibration blob the calTarget values must be non-zero and unique, and the calTime values must be non-zero. Don't rely on get_random_bytes() to be random enough to guarantee this. Force the calTarget and calTime values to be valid while retaining randomness in the values. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 177862317a98 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers") Link: https://patch.msgid.link/20240822115725.259568-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-22spi: pxa2xx: Move PM runtime handling to the glue driversAndy Shevchenko
PCI and platform buses have different defaults for runtime PM. In particular PCI probe is assumed to be called when PM runtime is enabled by the PCI core. In this case if we try enable it again the PM runtime complaints with pxa2xx_spi_pci 0000:00:07.0: Unbalanced pm_runtime_enable! Fix this by moving PM runtime handling from the SPI PXA2xx core to the glue drivers. Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly") Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file") Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240822113408.750831-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 18:44:57 +0000