| Age | Commit message (Collapse) | Author |
|---|
|
The platform_data field may be supplied by legacy board code.
In other cases we override it, and module remove and probe cycle
will crash the kernel since it will carry a stale pointer.
Fix this by supplying a third argument to the pxa2xx_spi_probe()
and avoid overriding dev->platform_data.
Reported-by: Hao Ma <hao.ma@intel.com>
Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240822113408.750831-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 39dc8b8ea387 ("wifi: mac80211: pass parsed TPE data to drivers") breaks
ath11k, leading to kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:ath11k_mac_get_eirp_power.isra.0+0x5b/0x80 [ath11k]
Call Trace:
<TASK>
ath11k_mac_fill_reg_tpc_info+0x3d6/0x800 [ath11k]
ath11k_mac_vdev_start_restart+0x412/0x4d0 [ath11k]
ath11k_mac_op_sta_state+0x7bc/0xbb0 [ath11k]
drv_sta_state+0xf1/0x5f0 [mac80211]
sta_info_insert_rcu+0x28d/0x530 [mac80211]
sta_info_insert+0xf/0x20 [mac80211]
ieee80211_prep_connection+0x3b4/0x4c0 [mac80211]
ieee80211_mgd_auth+0x363/0x600 [mac80211]
The issue scenario is, AP advertises power spectral density (PSD) values in its
transmit power envelope (TPE) IE and supports 160 MHz bandwidth in 6 GHz. When
connecting to this AP, in ath11k_mac_parse_tx_pwr_env(), the local variable
psd is true and then reg_tpc_info.num_pwr_levels is set to 8 due to 160 MHz
bandwidth. Note here ath11k fails to set reg_tpc_info.is_psd_power as TRUE due
to above commit. Then in ath11k_mac_fill_reg_tpc_info(), for each of the 8
power levels, for a PSD channel, ath11k_mac_get_psd_channel() is expected to
be called to get required information. However due to invalid
reg_tpc_info.is_psd_power, it is ath11k_mac_get_eirp_power() that gets called
and passed with pwr_lvl_idx as one of the arguments. Note this function
implicitly requires pwr_lvl_idx to be no more than 3. So when pwr_lvl_idx is
larger than that ath11k_mac_get_seg_freq() returns invalid center frequency,
with which as the input ieee80211_get_channel() returns NULL, then kernel
crashes due to NULL pointer dereference.
Fix it by setting reg_tpc_info.is_psd_power properly.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Fixes: 39dc8b8ea387 ("wifi: mac80211: pass parsed TPE data to drivers")
Reported-by: Mikko Tiihonen <mikko.tiihonen@iki.fi>
Tested-by: Mikko Tiihonen <mikko.tiihonen@iki.fi>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219131
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240813083808.9224-1-quic_bqiang@quicinc.com
|
|
Some CPT AF registers are per LF and others are global. Translation
of PF/VF local LF slot number to actual LF slot number is required
only for accessing perf LF registers. CPT AF global registers access
do not require any LF slot number. Also, there is no reason CPT
PF/VF to know actual lf's register offset.
Without this fix microcode loading will fail, VFs cannot be created
and hardware is not usable.
Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write")
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current implementation incorrectly sets the mode bit of the PHY chip.
Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the
configuration nibble of a LED- it should be set independently of the
index of the LED being configured.
As a consequence, the RTL8211F LED control is actually operating in Mode A.
Fix the error by or-ing final register value to write with a const-value of
RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly.
Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Sava Jakovljev <savaj@meyersound.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COM
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe() and devm_clk_get_optional(). This results in much
less code.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-6-wahrenst@gmx.net
|
|
DRM_ERROR() has been deprecated in favor of pr_err(). However, we
should prefer to use drm_err() whenever possible so we get device-
specific output with the error message. In error case of kcalloc,
we can simply drop DRM_ERROR(), because kcalloc already logs errors.
Suggested-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-4-wahrenst@gmx.net
|
|
The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is
powered in detect") introduced the necessary power management handling
to avoid register access while controller is powered down.
Unfortunately it just print a warning if pm_runtime_resume_and_get()
fails and proceed anyway.
This could happen during suspend to idle. So we must assume it is unsafe
to access the HDMI register. So bail out properly.
Fixes: 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-3-wahrenst@gmx.net
|
|
The MAC only has add the TX delay and it can not be modified.
MAC and PHY are both set the TX delay cause transmission problems.
So just disable TX delay in PHY, when use rgmii to attach to
external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers.
And it is does not matter to internal phy.
Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink")
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Cc: stable@vger.kernel.org # 6.3+
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug
headphone or headset.
It had a chance to get no sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/d0de1b03fd174520945dde216d765223@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Ensure there is sufficient room to access the protocol field of the
VLAN header, validate it once before the flowtable lookup.
=====================================================
BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline]
nf_ingress net/core/dev.c:5440 [inline]
Fixes: 4cd91f7c290f ("netfilter: flowtable: add vlan support")
Reported-by: syzbot+8407d9bb88cd4c6bf61a@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Depopulate device in probe error paths to fix leak of children
resources.
Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240814093957.37940-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function never performs any paltform device allocation, thus
error path "undo_platform_dev_alloc" is entirely bogus. It drops the
reference count from the platform device being probed. If error path is
triggered, this will lead to unbalanced device reference counts and
premature release of device resources, thus possible use-after-free when
releasing remaining devm-managed resources.
Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20240814093957.37940-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an
endpoint is only assigned once. Unless the endpoint is reset, don't
clear this flag. Otherwise we may set endpoint resource again, which
prevents the driver from initiate transfer after handling a STALL or
endpoint halt to the control endpoint.
Commit f2e0eee47038 ("usb: dwc3: ep0: Don't reset resource alloc flag")
was fixing the initial issue, but did this only for physical ep1. Since
the function dwc3_ep0_stall_and_restart is resetting the flags for both
physical endpoints, this also has to be done for ep0.
Cc: stable@vger.kernel.org
Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240814-dwc3hwep0reset-v2-1-29e1d7d923ea@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove_power_attributes()
Device attribute group @usb3_hardware_lpm_attr_group is merged by
add_power_attributes(), but it is not unmerged explicitly, fixed by
unmerging it in remove_power_attributes().
Fixes: 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20240820-sysfs_fix-v2-1-a9441487077e@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some FSA4480-compatible chips like the OCP96011 used on Fairphone 5
return 0x00 from the CHIP_ID register. Handle that gracefully and only
fail probe when the I2C read has failed.
With this the dev_dbg will print 0 but otherwise continue working.
[ 0.251581] fsa4480 1-0042: Found FSA4480 v0.0 (Vendor ID = 0)
Cc: stable@vger.kernel.org
Fixes: e885f5f1f2b4 ("usb: typec: fsa4480: Check if the chip is really there")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240818-fsa4480-chipid-fix-v1-1-17c239435cf7@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Depopulate device in probe error paths to fix leak of children
resources.
Fixes: 53b5ff83d893 ("usb: dwc3: xilinx: improve error handling for PM APIs")
Cc: stable@vger.kernel.org
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240816075409.23080-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Depopulate device in probe error paths to fix leak of children
resources.
Fixes: ee249b455494 ("usb: dwc3: omap: remove IRQ_NOAUTOEN used with shared irq")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240816075409.23080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An USB hub is not a HCD, but an USB device. Fix the referenced schema
accordingly.
Fixes: bfbf2e4b77e2 ("dt-bindings: usb: Document the Microchip USB2514 hub")
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240815113132.372542-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit "6acba0345b68 usb:gadget:uvc Do not use worker thread to pump
isoc usb requests", pump work could only be queued in uvc_video_complete()
and uvc_v4l2_qbuf(). If VIDIOC_QBUF is executed before VIDIOC_STREAMON,
we can only depend on uvc_video_complete() to queue pump work. However,
this requires some free requests in req_ready list. If req_ready list is
empty all the time, pump work will never be queued and video datas will
never be pumped to usb controller. Actually, this situation could happen
when run uvc-gadget with static image:
$ ./uvc-gadget -i 1080p.jpg uvc.0
When capture image from this device, the user app will always block there.
The issue is uvc driver has queued video buffer before streamon, but the
req_ready list is empty all the time after streamon. This will queue pump
work in uvcg_video_enable() to fill some request to req_ready list so the
uvc device could work properly.
Fixes: 6acba0345b68 ("usb:gadget:uvc Do not use worker thread to pump isoc usb requests")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240814112537.2608949-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USB_DEVICE(0x1901, 0x0006) may send data before cdc_acm is ready, which
may be misinterpreted in the default N_TTY line discipline.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Acked-by: Oliver Neuku <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240814072905.2501-1-ian.ray@gehealthcare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch fixes the incorrect "stream_id" table index instead of
"ep_index" used in cdnsp_get_hw_deq function.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: stable@vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB95381F2182688811D5C711CEDD8D2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address.
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240815064836.1491-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On a system with a GICv3, if a guest hasn't been configured with
GICv3 and that the host is not capable of GICv2 emulation,
a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2.
We therefore try to emulate the SGI access, only to hit a NULL
pointer as no private interrupt is allocated (no GIC, remember?).
The obvious fix is to give the guest what it deserves, in the
shape of a UNDEF exception.
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820100349.3544850-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
I haven't had time to maintain the UVC gadget driver for a long while.
Dan Scally confirmed he is also in a similar -ENOTIME situation with no
short term hope of fixing that. Being listed as maintainers doesn't help
progress, so mark the driver as orphan to reflect the current state.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20240813104447.25821-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mcp251x_hw_wake() function is called with the mpc_lock mutex held and
disables the interrupt handler so that no interrupts can be processed while
waking the device. If an interrupt has already occurred then waiting for
the interrupt handler to complete will deadlock because it will be trying
to acquire the same mutex.
CPU0 CPU1
---- ----
mcp251x_open()
mutex_lock(&priv->mcp_lock)
request_threaded_irq()
<interrupt>
mcp251x_can_ist()
mutex_lock(&priv->mcp_lock)
mcp251x_hw_wake()
disable_irq() <-- deadlock
Use disable_irq_nosync() instead because the interrupt handler does
everything while holding the mutex so it doesn't matter if it's still
running.
Fixes: 8ce8c0abcba3 ("can: mcp251x: only reset hardware as required")
Signed-off-by: Simon Arlott <simon@octiron.net>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/4fc08687-1d80-43fe-9f0d-8ef8475e75f6@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpa
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
Core Changes:
ci:
- Update dependencies
docs:
- Cleanups
edid:
- Improve debug logging
- Clean up interface
fbdev emulation:
- Remove old fbdev hooks
- Update documentation
panic:
- Cleanups
Driver Changes:
amdgpu:
- Remove usage of old fbdev hooks
- Use backlight constants
ast:
- Fix timeout loop for DP link training
hisilicon:
- hibmc: Cleanups
mipi-dsi:
- Improve error handling
- startek-kd070fhfid015: Use new error handling
nouveau:
- Remove usage of old fbdev hooks
panel:
- Use backlight constants
radeon:
- Use backlight constants
rockchip:
- Improve DP sink-capability reporting
- Cleanups
- dw_hdmi: Support 4k@60Hz; Cleanups
- vop: Support RGB display on Rockchip RK3066; Support 4096px width
tilcdc:
- Use backlight constants
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816084109.GA229316@localhost.localdomain
|
|
Zenghui reports that VMs backed by hugetlb pages are no longer booting
after commit fd276e71d1e7 ("KVM: arm64: nv: Handle shadow stage 2 page
faults").
Support for shadow stage-2 MMUs introduced the concept of a fault IPA
and canonical IPA to stage-2 fault handling. These are identical in the
non-nested case, as the hardware stage-2 context is always that of the
canonical IPA space.
Both addresses need to be hugepage-aligned when preparing to install a
hugepage mapping to ensure that KVM uses the correct GFN->PFN translation
and installs that at the correct IPA for the current stage-2.
And now I'm feeling thirsty after all this talk of IPAs...
Fixes: fd276e71d1e7 ("KVM: arm64: nv: Handle shadow stage 2 page faults")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240822071710.2291690-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Dell platform, plug headphone or headset, it had a chance to get no
sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/bb8e2de30d294dc287944efa0667685a@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Ast's BMC connector tracks the status of an underlying physical
connector and updates the BMC status accordingly. This functionality
works around GNOME's settings app, which cannot handle multiple
outputs on the same CRTC.
The workaround is now obsolete as all code for physical outputs
handle BMC support internally. Hence, remove the driver's code and
the BMC output entirely.
v3:
- remove struct ast_bmc_connector
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-12-tzimmermann@suse.de
|
|
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-11-tzimmermann@suse.de
|
|
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-10-tzimmermann@suse.de
|
|
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-9-tzimmermann@suse.de
|
|
Convert DP501 support to struct drm_edid and its helpers. Simplifies
and modernizes the EDID handling.
The driver reads 4 bytes at once, but the overall read length is now
variable. Therefore update the EDID read loop to never return more than
the requested bytes.
v2:
- fix reading EDID data
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-8-tzimmermann@suse.de
|
|
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-7-tzimmermann@suse.de
|
|
Remove the CRTC handling in the ASTDP detect_ctx helper and enable
power while the detecting the display. Unconditionally wait a few
milliseconds after switching power. Simplifies the code and makes it
more robust.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-6-tzimmermann@suse.de
|
|
bch2_btree_key_cache_drop() evicts the key cache entry - it's used when
we're doing an update that bypasses the key cache, because for cache
coherency reasons a key can't be in the key cache unless it also exists
in the btree - i.e. creates have to bypass the cache.
After evicting, the path no longer points to a key cache key, and
relock() will always fail if should_be_locked is true.
Prep for improving path->should_be_locked assertions
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Convert ASTDP support to struct drm_edid and its helpers. Simplifies
and modernizes the EDID handling.
The driver reads 4 bytes at once, but the overall read length is now
variable. Therefore update the EDID read loop to never return more than
the requested bytes.
The device does not seem to support EDID extensions, as the driver
actively clears any such information from the main EDID header. As
the new interface allows for reading extension blocks for EDID, make
sure that the block is always 0 (i.e., the main header). A later
update might fix that.
v2:
- fix reading if len is not a multiple of 4
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-5-tzimmermann@suse.de
|
|
The modeset mutex protects EDID retrival from concurrent modeset
operations. Acquire the lock in ast_astdp_read_edid(). Prepares the
code for conversion to struct drm_edid.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-4-tzimmermann@suse.de
|
|
Add struct ast_connector to track a connector's physical status. With
the upcoming BMC support, the physical status can be different from the
reported status.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-3-tzimmermann@suse.de
|
|
Move the modesetting code for the various transmitter chips into
their own source files before adding BMC support. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-2-tzimmermann@suse.de
|
|
ret was assigned twice in check_dirent_to_subvol(). Reported by cocci.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch_dev->io_ref does not protect against the filesystem going away;
bch_fs->writes does.
Thus the filesystem write ref needs to be the last ref we release.
Reported-by: syzbot+9e0404b505e604f67e41@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
we allow new fields to be added to existing key types, and new versions
should treat them as being zeroed; this was not handled in
alloc_v4_validate.
Reported-by: syzbot+3b2968fa4953885dd66a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
j->last_empty_seq needs to match j->seq when the journal is empty
Reported-by: syzbot+4093905737cf289b6b38@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
seeing an odd bug where we fail to correctly return an error from
.get_tree():
https://syzkaller.appspot.com/bug?extid=c0360e8367d6d8d04a66
we need to be able to distinguish between accidently returning a
positive error (as implied by the log) and no error.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+47ecc948aadfb2ab3efc@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Journal replay, in the slowpath where we insert keys in journal order,
was inserting keys in the wrong order; keys from early repair come last.
Reported-by: syzbot+2c4fcb257ce2b6a29d0e@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 7a254053a590 ("bcachefs: support FS_IOC_SETFSLABEL")
Reported-by: syzbot+7e9efdfec27fbde0141d@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We weren't always so strict about trans->locked state - but now we are,
and new assertions are shaking some bugs out.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
