| Age | Commit message (Collapse) | Author |
|---|
|
Dell All In One (AIO) models released after 2017 use a backlight
controller board connected to an UART.
In DSDT this uart port will be defined as:
Name (_HID, "DELL0501")
Name (_CID, EisaId ("PNP0501")
Commit 484bae9e4d6a ("platform/x86: Add new Dell UART backlight driver")
has added support for this, but I neglected to tie this into
acpi_video_get_backlight_type().
Now the first AIO has turned up which has not only the DSDT bits for this,
but also an actual controller attached to the UART, yet it is not using
this controller for backlight control.
Add support to acpi_video_get_backlight_type() for a new dell_uart
backlight type. So that the existing infra to override the backlight
control method on the commandline or with DMI quirks can be used.
Fixes: 484bae9e4d6a ("platform/x86: Add new Dell UART backlight driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240814190159.15650-2-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Using the correct bit helps. The documentation specifies bit 0 in both
registers to be controlling polarity of dpi_vsync_input and
dpi_hsync_input polarity. Bit 1 is reserved, and should therefore not be
set.
Tested with panel that requires active high vsync and hsync.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240814-nwl-dsi-sync-polarity-v1-1-ee198e369196@geanix.com
|
|
There's no need to get the length of an DT array property before
parsing the array. of_property_read_variable_u8_array() takes a minimum
and maximum length and returns the actual length (or error code).
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731201407.1838385-4-robh@kernel.org
|
|
Make use of devm_clk_get_enabled() to replace devm_clk_get() and
clk_prepare_enable() for isfr and iahb clocks, and drop the now
unnecessary calls to clk_disable_unprepare().
Similarly, use devm_clk_get_optional_enabled() helper for cec clock,
which additionally allows to remove the -ENOENT test.
Moreover, the clock related members of struct dw_hdmi are not required
anymore, hence drop them.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813-dw-hdmi-simple-clk-v1-1-78d45cef02a9@collabora.com
|
|
If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set,
this driver won't initialize a connector and hence display mode won't be
validated in drm_connector_helper_funcs::mode_valid(). So, move the mode
validation from drm_connector_helper_funcs::mode_valid() to
drm_bridge_funcs::mode_valid(), because the mode validation is always done
for the bridge.
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813091637.1054586-1-victor.liu@nxp.com
|
|
We should unpin before evicting all memory, and repin after GT resume.
This way, we preserve the contents of the framebuffers, and won't hang
on resume due to migration engine not being restored yet.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806105044.596842-3-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst,,, <maarten.lankhorst@linux.intel.com>
|
|
Suspend fbdev sooner, and disable user access before suspending to
prevent some races. I've noticed this when comparing xe suspend to
i915's.
Matches the following commits from i915:
24b412b1bfeb ("drm/i915: Disable intel HPD poll after DRM poll init/enable")
1ef28d86bea9 ("drm/i915: Suspend the framebuffer console earlier during system suspend")
bd738d859e71 ("drm/i915: Prevent modesets during driver init/shutdown")
Thanks to Imre for pointing me to those commits.
Driver shutdown is currently missing, but I have some idea how to
implement it next.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806105044.596842-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst,,, <maarten.lankhorst@linux.intel.com>
|
|
The sparse tool complains as follows:
drivers/iommu/iommufd/selftest.c:277:30: warning:
symbol 'dirty_ops' was not declared. Should it be static?
This symbol is not used outside of selftest.c, so marks it static.
Fixes: 266ce58989ba ("iommufd/selftest: Test IOMMU_HWPT_ALLOC_DIRTY_TRACKING")
Link: https://patch.msgid.link/r/20240819120007.3884868-1-ruanjinjie@huawei.com
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The fence lock is part of the queue, therefore in the current design
anything locking the fence should then also hold a ref to the queue to
prevent the queue from being freed.
However, currently it looks like we signal the fence and then drop the
queue ref, but if something is waiting on the fence, the waiter is
kicked to wake up at some later point, where upon waking up it first
grabs the lock before checking the fence state. But if we have already
dropped the queue ref, then the lock might already be freed as part of
the queue, leading to uaf.
To prevent this, move the fence lock into the fence itself so we don't
run into lifetime issues. Alternative might be to have device level
lock, or only release the queue in the fence release callback, however
that might require pushing to another worker to avoid locking issues.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2454
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2342
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2020
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240814110129.825847-2-matthew.auld@intel.com
|
|
Hangbin Liu says:
====================
selftests: Fix udpgro failures
There are 2 issues for the current udpgro test. The first one is the testing
doesn't record all the failures, which may report pass but the test actually
failed. e.g.
https://netdev-3.bots.linux.dev/vmksft-net/results/725661/45-udpgro-sh/stdout
The other one is after commit d7db7775ea2e ("net: veth: do not manipulate
GRO when using XDP"), there is no need to load xdp program to enable GRO
on veth device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit d7db7775ea2e ("net: veth: do not manipulate GRO when using
XDP"), there is no need to load XDP program to enable GRO. On the other
hand, the current test is failed due to loading the XDP program. e.g.
# selftests: net: udpgro.sh
# ipv4
# no GRO ok
# no GRO chk cmsg ok
# GRO ./udpgso_bench_rx: recv: bad packet len, got 1472, expected 14720
#
# failed
[...]
# bad GRO lookup ok
# multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# failed
ok 1 selftests: net: udpgro.sh
After fix, all the test passed.
# ./udpgro.sh
ipv4
no GRO ok
[...]
multiple GRO socks ok
Fixes: d7db7775ea2e ("net: veth: do not manipulate GRO when using XDP")
Reported-by: Yi Chen <yiche@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-53858
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we only check the latest senders's exit code. If the receiver
report failed, it is not recoreded. Fix it by checking the exit code
of all the involved processes.
Before:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
0
After:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
1
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
UMP events don't use the event type field, hence it's invalid to apply
the filter, which may drop the events unexpectedly.
Skip the event filtering for UMP events, instead.
Fixes: 46397622a3fa ("ALSA: seq: Add UMP support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240819084156.10286-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP Pavilion Plus 14-ey0xxx needs existing quirk
ALC245_FIXUP_HP_X360_MUTE_LEDS to enable its mute/micmute LEDs.
Signed-off-by: John Sweeney <john.sweeney@runbox.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/E1sfhrD-0007TA-HC@rmmprod05.runbox
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As commit 2e6506e1c4ee ("mm/migrate: fix deadlock in
migrate_pages_batch() on large folios") has landed upstream, large
folios can be safely enabled for compressed inodes since all
prerequisites have already landed in 6.11-rc1.
Stress tests has been running on my fleet for over 20 days without any
regression. Additionally, users [1] have requested it for months.
Let's allow large folios for EROFS full cases upstream now for wider
testing.
[1] https://lore.kernel.org/r/CAGsJ_4wtE8OcpinuqVwG4jtdx6Qh5f+TON6wz+4HMCq=A2qFcA@mail.gmail.com
Cc: Barry Song <21cnbao@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
[ Gao Xiang: minor commit typo fixes. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240819025207.3808649-1-hsiangkao@linux.alibaba.com
|
|
If the WCN module is powered up before linux boots and the ath11k driver
probes at the same time as the power sequencing driver, we may end up
driving the wlan-enable GPIO low in the latter, breaking the start-up of
the WLAN module. Request the wlan-enable GPIO as-is so that if the WLAN
module is already starting/started, we leave it alone.
Fixes: 2f1630f437df ("power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets")
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20240813190751.155035-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
BO from xe_bo_create_user() will always be of type,
ttm_bo_type_device. So remove that redundant parameter.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816102248.25628-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
combination
The old quirk combination sometimes cause a laggy keyboard after boot. With
the new quirk the initial issue of an unresponsive keyboard after s3 resume
is also fixed, but it doesn't have the negative side effect of the
sometimes laggy keyboard.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
On s3 resume the i8042 driver tries to restore the controller to a known
state by reinitializing things, however this can confuse the controller
with different effects. Mostly occasionally unresponsive keyboards after
resume.
These issues do not rise on s0ix resume as here the controller is assumed
to preserved its state from before suspend.
This patch adds a quirk for devices where the reinitialization on s3 resume
is not needed and might be harmful as described above. It does this by
using the s0ix resume code path at selected locations.
This new quirk goes beyond what the preexisting reset=never quirk does,
which only skips some reinitialization steps.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We are checking cp_irq_count from the wrong hdcp structure which
ends up giving timed out errors. We only increment the cp_irq_count
of the primary connector's hdcp structure but here in case of
multidisplay setup we end up checking the secondary connector's hdcp
structure, which will not have its cp_irq_count incremented. This leads
to a timed out at CP_IRQ error even though a CP_IRQ was raised. Extract
it from the correct intel_hdcp structure.
--v2
-Explain why it was the wrong hdcp structure [Jani]
Fixes: 8c9e4f68b861 ("drm/i915/hdcp: Use per-device debugs")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809114127.3940699-2-suraj.kandpal@intel.com
(cherry picked from commit dd925902634def895690426bf10e0a8b3e56f56d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Yet another quirk entry for Fujitsu laptop. Lifebook E756 requires
i8041.nomux for keeping the touchpad working after suspend/resume.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229056
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240814100630.2048-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Simple enough to just open-code it.
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240806112208.150323-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
- Use i_size instead of i_size_read() due to immutable fses;
- Get rid of an unneeded goto since erofs_fill_dentries() also works;
- Remove unnecessary lines.
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240801112622.2164029-1-hongzhen@linux.alibaba.com
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
fixes:
00488 WARNING: CPU: 9 PID: 194 at mm/page_alloc.c:4410 __alloc_pages_noprof+0x1818/0x1888
00488 Modules linked in:
00488 CPU: 9 UID: 0 PID: 194 Comm: kworker/u66:1 Not tainted 6.11.0-rc1-ktest-g18fa10d6495f #2931
00488 Hardware name: linux,dummy-virt (DT)
00488 Workqueue: writeback wb_workfn (flush-bcachefs-2)
00488 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00488 pc : __alloc_pages_noprof+0x1818/0x1888
00488 lr : __alloc_pages_noprof+0x5f4/0x1888
00488 sp : ffffff80ccd8ed00
00488 x29: ffffff80ccd8ed00 x28: 0000000000000000 x27: dfffffc000000000
00488 x26: 0000000000000010 x25: 0000000000000002 x24: 0000000000000000
00488 x23: 0000000000000000 x22: 1ffffff0199b1dbe x21: ffffff80cc680900
00488 x20: 0000000000000000 x19: ffffff80ccd8eed0 x18: 0000000000000000
00488 x17: ffffff80cc58a010 x16: dfffffc000000000 x15: 1ffffff00474e518
00488 x14: 1ffffff00474e518 x13: 1ffffff00474e518 x12: ffffffb8104701b9
00488 x11: 1ffffff8104701b8 x10: ffffffb8104701b8 x9 : ffffffc08043cde8
00488 x8 : 00000047efb8fe48 x7 : ffffff80ccd8ee20 x6 : 0000000000048000
00488 x5 : 1ffffff810470138 x4 : 0000000000000050 x3 : 1ffffff0199b1d94
00488 x2 : ffffffb0199b1d94 x1 : 0000000000000001 x0 : ffffffc082387448
00488 Call trace:
00488 __alloc_pages_noprof+0x1818/0x1888
00488 new_slab+0x284/0x2f0
00488 ___slab_alloc+0x208/0x8e0
00488 __kmalloc_noprof+0x328/0x340
00488 __bch2_writepage+0x106c/0x1830
00488 write_cache_pages+0xa0/0xe8
due to __GFP_NOFAIL without allowing reclaim
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
attempts to retrofit memory safety onto C are increasingly annoying
------------[ cut here ]------------
memcpy: detected field-spanning write (size 4) of single field "&k.replicas" at fs/bcachefs/replicas.c:454 (size 3)
WARNING: CPU: 5 PID: 6525 at fs/bcachefs/replicas.c:454 bch2_replicas_gc2+0x2cb/0x400 [bcachefs]
bch2_replicas_gc2+0x2cb/0x400:
bch2_replicas_gc2 at /home/ojab/src/bcachefs/fs/bcachefs/replicas.c:454 (discriminator 3)
Modules linked in: dm_mod tun nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay msr sctp bcachefs lz4hc_compress lz4_compress libcrc32c xor raid6_pq lz4_decompress pps_ldisc pps_core wireguard libchacha20poly1305 chacha_x86_64 poly1305_x86_64 ip6_udp_tunnel udp_tunnel curve25519_x86_64 libcurve25519_generic libchacha sit tunnel4 ip_tunnel af_packet bridge stp llc ip6table_nat ip6table_filter ip6_tables xt_MASQUERADE xt_conntrack iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables tcp_bbr sch_fq_codel efivarfs nls_iso8859_1 nls_cp437 vfat fat cdc_mbim cdc_wdm cdc_ncm cdc_ether usbnet r8152 input_leds joydev mii amdgpu mousedev hid_generic usbhid hid ath10k_pci amd_atl edac_mce_amd ath10k_core kvm_amd ath kvm mac80211 bfq crc32_pclmul crc32c_intel polyval_clmulni polyval_generic sha512_ssse3 sha256_ssse3 sha1_ssse3 snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg i2c_algo_bit drm_exec snd_hda_codec r8169 drm_suballoc_helper
aesni_intel gf128mul crypto_simd amdxcp realtek mfd_core tpm_crb drm_buddy snd_hwdep mdio_devres libarc4 cryptd tpm_tis wmi_bmof cfg80211 evdev libphy snd_hda_core tpm_tis_core gpu_sched rapl xhci_pci xhci_hcd snd_pcm drm_display_helper snd_timer tpm sp5100_tco rfkill efi_pstore mpt3sas drm_ttm_helper ahci usbcore libaescfb ccp snd ttm 8250 libahci watchdog soundcore raid_class sha1_generic acpi_cpufreq k10temp 8250_base usb_common scsi_transport_sas i2c_piix4 hwmon video serial_mctrl_gpio serial_base ecdh_generic wmi rtc_cmos backlight ecc gpio_amdpt rng_core gpio_generic button
CPU: 5 UID: 0 PID: 6525 Comm: bcachefs Tainted: G W 6.11.0-rc1-ojab-00058-g224bc118aec9 #6 6d5debde398d2a84851f42ab300dae32c2992027
Tainted: [W]=WARN
RIP: 0010:bch2_replicas_gc2+0x2cb/0x400 [bcachefs]
Code: c7 c2 60 91 d1 c1 48 89 c6 48 c7 c7 98 91 d1 c1 4c 89 14 24 44 89 5c 24 08 48 89 44 24 20 c6 05 fa 68 04 00 01 e8 05 a3 40 e4 <0f> 0b 4c 8b 14 24 44 8b 5c 24 08 48 8b 44 24 20 e9 55 fe ff ff 8b
RSP: 0018:ffffb434c9263d60 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9a8efa79cc00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffb434c9263de0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000005
R13: ffff9a8efa73c300 R14: ffff9a8d9e880000 R15: ffff9a8d9e8806f8
FS: 0000000000000000(0000) GS:ffff9a9410c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565423373090 CR3: 0000000164e30000 CR4: 00000000003506f0
Call Trace:
<TASK>
? __warn+0x97/0x150
? bch2_replicas_gc2+0x2cb/0x400 [bcachefs 9803eca5e131ef28f26250ede34072d5b50d98b3]
bch2_replicas_gc2+0x2cb/0x400:
bch2_replicas_gc2 at /home/ojab/src/bcachefs/fs/bcachefs/replicas.c:454 (discriminator 3)
? report_bug+0x196/0x1c0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x17/0x80
? __wake_up_klogd.part.0+0x4c/0x80
? asm_exc_invalid_op+0x16/0x20
? bch2_replicas_gc2+0x2cb/0x400 [bcachefs 9803eca5e131ef28f26250ede34072d5b50d98b3]
bch2_replicas_gc2+0x2cb/0x400:
bch2_replicas_gc2 at /home/ojab/src/bcachefs/fs/bcachefs/replicas.c:454 (discriminator 3)
? bch2_dev_usage_read+0xa0/0xa0 [bcachefs 9803eca5e131ef28f26250ede34072d5b50d98b3]
bch2_dev_usage_read+0xa0/0xa0:
discard_in_flight_remove at /home/ojab/src/bcachefs/fs/bcachefs/alloc_background.c:1712
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: c2f6e16a6771 ("bcachefs: Increase size of cuckoo hash table on too many rehashes")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Replace the deprecated one-element arrays with flexible-array members
in the structs filesystem_attribute_info and filesystem_device_info.
There are no binary differences after this conversion.
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are a couple of spelling mistakes in the documentation. This patch
fixes them.
Signed-off-by: Victor Timofei <victor@vtimothy.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
operations()
If there is ->PreviousSessionId field in the session setup request,
The session of the previous connection should be destroyed.
During this, if the smb2 operation requests in the previous session are
being processed, a racy issue could happen with ksmbd_destroy_file_table().
This patch sets conn->status to KSMBD_SESS_NEED_RECONNECT to block
incoming operations and waits until on-going operations are complete
(i.e. idle) before desctorying the previous session.
Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25040
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
rsp buffer is allocated larger than spnego_blob from
smb2_allocate_rsp_buf().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Mandatory locking is enforced for cached reads, which violates
default posix semantics, and also it is enforced inconsistently.
This affected recent versions of libreoffice, and can be
demonstrated by opening a file twice from the same client,
locking it from handle one and trying to read from it from
handle two (which fails, returning EACCES).
There is already a mount option "forcemandatorylock"
(which defaults to off), so with this change only when the user
intentionally specifies "forcemandatorylock" on mount will we
break posix semantics on read to a locked range (ie we will
only fail in this case, if the user mounts with
"forcemandatorylock").
An earlier patch fixed the write path.
Fixes: 85160e03a79e ("CIFS: Implement caching mechanism for mandatory brlocks")
Cc: stable@vger.kernel.org
Cc: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reported-by: abartlet@samba.org
Reported-by: Kevin Ottens <kevin.ottens@enioka.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.
These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.
Both of these fixes have been in linux-next all week with no reported
issues"
* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
resolve some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
tty: atmel_serial: use the correct RTS flag.
tty: vt: conmakehash: remove non-portable code printing comment header
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
usb: typec: ucsi: Fix the return value of ucsi_run_command()
usb: xhci: fix duplicate stall handling in handle_tx_event()
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
latency spikes and the fixes don't handle all corner cases. Due to
summer holidays we're taking a shortcut to disable it for release
builds and will fix it in the near future.
- only enable extent map shrinker for DEBUG builds, temporary quick
fix to avoid latency spikes for regular builds
- update target inode's ctime on unlink, mandated by POSIX
- properly take lock to read/update block group's zoned variables
- add counted_by() annotations"
* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: only enable extent map shrinker for DEBUG builds
btrfs: zoned: properly take lock to read/update block group's zoned variables
btrfs: tree-checker: add dev extent item checks
btrfs: update target inode's ctime on unlink
btrfs: send: annotate struct name_cache_entry with __counted_by()
|
|
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f258230 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"
* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.
* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/topology: Check if a core is online
cpu/SMT: Enable SMT only if a core is online
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
powerpc/mm: Fix size of allocated PGDIR
soc: fsl: qbman: remove unused struct 'cgr_comp'
|
|
Those counters were used to keep track of the numbers VMs in fault mode
and in non-fault mode, to determine if the whole device was in fault mode
or not. This is no longer needed so remove those variables and their
usages.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-12-francois.dugast@intel.com
|
|
With this restriction, all VMs on the device must be faulting VMs if there
is already one faulting VM, in which case the device is considered in
fault mode. This prevents for example an application from running 3D jobs
for the compositor while submitting a SVM compute job on the same device.
Now that mutual exclusion of faulting LR jobs and dma fence jobs is
ensured on the hw engine group, remove this restriction to allow running
faulting and non-faulting VMs on the same device.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-11-francois.dugast@intel.com
|
|
If the job about to be submitted is a dma-fence job, update the current
execution mode of the hw engine group. This triggers an immediate suspend
of the exec queues running faulting long-running jobs.
If the job about to be submitted is a long-running job, kick a new worker
used to resume the exec queues running faulting long-running jobs once
the dma-fence jobs have completed.
v2: Kick the resume worker from exec IOCTL, switch to unordered workqueue,
destroy it after use (Matt Brost)
v3: Do not resume if no exec queue was suspended (Matt Brost)
v4: Squash commits (Matt Brost)
v5: Do not kick the worker when xe_vm_in_preempt_fence_mode (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-10-francois.dugast@intel.com
|
|
Provide a way to safely transition execution modes of the hw engine group
ahead of the actual execution. When necessary, either wait for running
jobs to complete or preempt them, thus ensuring mutual exclusion between
execution modes.
Unlike a mutex, the rw_semaphore used in this context allows multiple
submissions in the same mode.
v2: Use lockdep_assert_held_write, add annotations (Matt Brost)
v3: Fix kernel doc, remove redundant code (Matt Brost)
v4: Now that xe_hw_engine_group_suspend_faulting_lr_jobs can fail,
propagate the error to the caller (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-9-francois.dugast@intel.com
|
|
This is a required feature for faulting long running jobs not to be
submitted while dma fence jobs are running on the hw engine group.
v2: Switch to lockdep_assert_held_write in worker, get a proper reference
for the last fence (Matt Brost)
v3: Directly call dma_fence_put with the fence ref (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-8-francois.dugast@intel.com
|
|
Ensure we can safely take a ref of the exec queue's last fence from the
context of resuming jobs from the hw engine group. The locking requirements
differ from the general case, hence the introduction of this new function.
v2: Add kernel doc, rework the code to prevent code duplication
v3: Fix kernel doc, remove now unnecessary lockdep variants (Matt Brost)
v4: Remove new put function (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-7-francois.dugast@intel.com
|
|
This code section is the same as the body of
xe_exec_queue_last_fence_put_unlocked() so call the function instead and
remove duplicated code to make maintenance easier.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-6-francois.dugast@intel.com
|
|
This is a required feature for dma fence jobs to preempt faulting long
running jobs in order to ensure mutual exclusion on a given hw engine
group.
v2: Pipeline calls to suspend(q) and suspend_wait(q) to improve
efficiency, switch to lockdep_assert_held_write (Matt Brost)
v3: Return error on suspend_wait failure to propagate on the call stack
up to IOCTL (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-5-francois.dugast@intel.com
|
|
Add helpers to safely add and delete the exec queues attached to a hw
engine group, and make use them at the time of creation and destruction of
the exec queues. Keeping track of them is required to control the
execution mode of the hw engine group.
v2: Improve error handling and robustness, suspend exec queues created in
fault mode if group in dma-fence mode, init queue link (Matt Brost)
v3: Delete queue from hw engine group when it is destroyed by the user,
also clean up at the time of closing the file in case the user did
not destroy the queue
v4: Use correct list when checking if empty, do not add the queue if VM
is in xe_vm_in_preempt_fence_mode (Matt Brost)
v5: Remove unrelated newline, add checks and asserts for group, unwind on
suspend failure (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-4-francois.dugast@intel.com
|
|
Rely on wait_event_interruptible_timeout() to put the process to sleep
with TASK_INTERRUPTIBLE. It allows using this function in interruptible
context.
v2: Propagate error on wait_event_interruptible_timeout (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-3-francois.dugast@intel.com
|
