summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-11Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Two last minute ARM irqchip driver fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND irqchip/keystone: Fix "scheduling while atomic" on rt
2017-02-11Merge branch 'for-linus-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has two last minute fixes. The highest priority here is a regression fix for the decompression code, but we also fixed up a problem with the 32-bit compat ioctls. The decompression bug could hand back the wrong data on big reads when zlib was used. I have a larger cleanup to make the math here less error prone, but at this stage in the release Omar's patch is the best choice" * 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix btrfs_decompress_buf2page() btrfs: fix btrfs_compat_ioctl failures on non-compat ioctls
2017-02-11Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fairly small fixes. None is a real show stopper, two automation detected problems: one memory leak, one use after free and four others each of which fixes something that has been a significant source of annoyance to someone" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed send scsi: aacraid: Fix INTx/MSI-x issue with older controllers scsi: mpt3sas: disable ASPM for MPI2 controllers scsi: mpt3sas: Force request partial completion alignment scsi: qla2xxx: Avoid that issuing a LIP triggers a kernel crash scsi: qla2xxx: Fix a recently introduced memory leak
2017-02-10devicetree: add lm90 thermal_zone sensor supportChristian Lamparter
This patch updates the LM90's devicetree definition to include the #thermal-sensor-cells property as well as the sensor constants in include/dt-bindings/thermal/lm90.h. Cc: Wei Ni <wni@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-10hwmon: (it87) Add support for IT8792EGuenter Roeck
The chip is similar to IT8732E, but supports only three fans and pwm outputs instead of four (the driver currently does not support the 4th fan and pwm output of IT8732E). Note that the chip ID is 0x8733, not 0x8792 as one would expect. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-10hwmon: (it87) Do not overwrite bit 2..6 of pwm control registersGuenter Roeck
In IT8620E, after setting pwm control to manual, it was observed that pwm values for fan 4..6 have reversed results (writing 0 results in fans running at full speed, writing 255 results in fans turned off). With the new PWM control, pwm polarity for pwm control 4..6 is specified in its pwm control registers. Those registers are overwritten when setting the pwm mode or the temperature mapping. Do not touch bit 2..6 of pwm control registers on register writes to fix the problem. Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-10hwmon: (it87) Fix pwm4 detection for IT8620 and IT8628Guenter Roeck
pwm4 is enabled if bit 2 of GPIO control register 4 is disabled, not when it is enabled. Since the check is for the skip condition, it is reversed. This applies to both IT8620 and IT8628. Fixes: 36c4d98a7883d ("hwmon: (it87) Add support for all pwm channels ...") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-10hwmon: (it87) Ensure that pwm control cache is current before updating valuesGuenter Roeck
If sensor attributes were never read, the pwm control data has not been initiialized, which can cause wrong driver behavior. Ensure that cached data is current before acting on it. Cc: stable@vger.kernel.org # 4.4+ Reported-by: Kevin Folz <kfolz@evertz.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-10hwmon: (it87) Improve IT8622 supportGuenter Roeck
Configuration registers on ITE8622 are different to 8620 and 8628 and require special handling. Also, the chip supports up to 5 pwm controls. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-10hwmon: (it87) Add support for IT8622EGuenter Roeck
IT8622E is similar to IT8620E, but only supports five pwm controls and five fan tachometers. Originally-from: Kevin Folz <kfolz@evertz.com>. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-10hwmon: (it87) Add feature flag indicating that VIN3 is connected to 5VGuenter Roeck
On IT8622E and IT8628E, VIN3 is expected to be connected to +5V. Add feature flag and reflect in input label. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-10Btrfs: fix btrfs_decompress_buf2page()Omar Sandoval
If btrfs_decompress_buf2page() is handed a bio with its page in the middle of the working buffer, then we adjust the offset into the working buffer. After we copy into the bio, we advance the iterator by the number of bytes we copied. Then, we have some logic to handle the case of discontiguous pages and adjust the offset into the working buffer again. However, if we didn't advance the bio to a new page, we may enter this case in error, essentially repeating the adjustment that we already made when we entered the function. The end result is bogus data in the bio. Previously, we only checked for this case when we advanced to a new page, but the conversion to bio iterators changed that. This restores the old, correct behavior. A case I saw when testing with zlib was: buf_start = 42769 total_out = 46865 working_bytes = total_out - buf_start = 4096 start_byte = 45056 The condition (total_out > start_byte && buf_start < start_byte) is true, so we adjust the offset: buf_offset = start_byte - buf_start = 2287 working_bytes -= buf_offset = 1809 current_buf_start = buf_start = 42769 Then, we copy bytes = min(bvec.bv_len, PAGE_SIZE - buf_offset, working_bytes) = 1809 buf_offset += bytes = 4096 working_bytes -= bytes = 0 current_buf_start += bytes = 44578 After bio_advance(), we are still in the same page, so start_byte is the same. Then, we check (total_out > start_byte && current_buf_start < start_byte), which is true! So, we adjust the values again: buf_offset = start_byte - buf_start = 2287 working_bytes = total_out - start_byte = 1809 current_buf_start = buf_start + buf_offset = 45056 But note that working_bytes was already zero before this, so we should have stopped copying. Fixes: 974b1adc3b10 ("btrfs: use bio iterators for the decompression handlers") Reported-by: Pat Erley <pat-lkml@erley.org> Reviewed-by: Chris Mason <clm@fb.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Tested-by: Liu Bo <bo.li.liu@oracle.com>
2017-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) If the timing is wrong we can indefinitely stop generating new ipv6 temporary addresses, from Marcus Huewe. 2) Don't double free per-cpu stats in ipv6 SIT tunnel driver, from Cong Wang. 3) Put protections in place so that AF_PACKET is not able to submit packets which don't even have a link level header to drivers. From Willem de Bruijn. 4) Fix memory leaks in ipv4 and ipv6 multicast code, from Hangbin Liu. 5) Don't use udp_ioctl() in l2tp code, UDP version expects a UDP socket and that doesn't go over very well when it is passed an L2TP one. Fix from Eric Dumazet. 6) Don't crash on NULL pointer in phy_attach_direct(), from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: l2tp: do not use udp_ioctl() xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend() NET: mkiss: Fix panic net: hns: Fix the device being used for dma mapping during TX net: phy: Initialize mdio clock at probe function igmp, mld: Fix memory leak in igmpv3/mld_del_delrec() xen-netfront: Improve error handling during initialization sierra_net: Skip validating irrelevant fields for IDLE LSIs sierra_net: Add support for IPv6 and Dual-Stack Link Sense Indications kcm: fix 0-length case for kcm_sendmsg() xen-netfront: Rework the fix for Rx stall during OOM and network stress net: phy: Fix PHY module checks and NULL deref in phy_attach_direct() net: thunderx: Fix PHY autoneg for SGMII QLM mode net: dsa: Do not destroy invalid network devices ping: fix a null pointer dereference packet: round up linear to header len net: introduce device min_header_len sit: fix a double free on error path lwtunnel: valid encap attr check should return 0 when lwtunnel is disabled ipv6: addrconf: fix generation of new temporary addresses
2017-02-10Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Third round of -rc fixes for 4.10 kernel: - two security related issues in the rxe driver - one compile issue in the RDMA uapi header" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: RDMA: Don't reference kernel private header from UAPI header IB/rxe: Fix mem_check_range integer overflow IB/rxe: Fix resid update
2017-02-10Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c bugfixes from Wolfram Sang: "Two bugfixes (proper IO mapping and use of mutex) for a driver feature we introduced in this cycle" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: piix4: Request the SMBUS semaphore inside the mutex i2c: piix4: Fix request_region size
2017-02-10Merge tag 'mmc-v4.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fix from Ulf Hansson: "mmci: Fix hang while waiting for busy-end interrupt" * tag 'mmc-v4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mmci: avoid clearing ST Micro busy end interrupt mistakenly
2017-02-10Merge tag 'sound-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are some last-minute fixes: two fixes for races in ALSA sequencer queue spotted by syzkaller, a revert for a regression of LINE6 driver (since 4.9), and a trivial new codec ID addition for Nvidia HDMI" * tag 'sound-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - adding a new NV HDMI/DP codec ID in the driver ALSA: seq: Fix race at creating a queue Revert "ALSA: line6: Only determine control port properties if needed" ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()
2017-02-10Merge tag 'nfsd-4.10-3' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd revert from Bruce Fields: "This patch turned out to have a couple problems. The problems are fixable, but at least one of the fixes is a little ugly. The original bug has always been there, so we can wait another week or two to get this right" * tag 'nfsd-4.10-3' of git://linux-nfs.org/~bfields/linux: nfsd: Revert "nfsd: special case truncates some more"
2017-02-10Merge tag 'powerpc-4.10-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes friom Michael Ellerman: "Apologies for the late pull request, but Ben has been busy finding bugs. - Userspace was semi-randomly segfaulting on radix due to us incorrectly handling a fault triggered by autonuma, caused by a patch we merged earlier in v4.10 to prevent the kernel executing userspace. - We weren't marking host IPIs properly for KVM in the OPAL ICP backend. - The ERAT flushing on radix was missing an isync and was incorrectly marked as DD1 only. - The powernv CPU hotplug code was missing a wakeup type and failing to flush the interrupt correctly when using OPAL ICP Thanks to Benjamin Herrenschmidt" * tag 'powerpc-4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Properly set "host-ipi" on IPIs powerpc/powernv: Fix CPU hotplug to handle waking on HVI powerpc/mm/radix: Update ERAT flushes when invalidating TLB powerpc/mm: Fix spurrious segfaults on radix with autonuma
2017-02-10l2tp: do not use udp_ioctl()Eric Dumazet
udp_ioctl(), as its name suggests, is used by UDP protocols, but is also used by L2TP :( L2TP should use its own handler, because it really does not look the same. SIOCINQ for instance should not assume UDP checksum or headers. Thanks to Andrey and syzkaller team for providing the report and a nice reproducer. While crashes only happen on recent kernels (after commit 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue")), this probably needs to be backported to older kernels. Fixes: 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue") Fixes: 85584672012e ("udp: Fix udp_poll() and ioctl()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10Merge branch 'for-chris' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.10
2017-02-10mtd: aspeed: remove redundant dev_err call in aspeed_smc_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-10genirq: Fix /proc/interrupts output alignmentH Hartley Sweeten
If the irq_desc being output does not have a domain associated the information following the 'name' is not aligned correctly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Link: http://lkml.kernel.org/r/20170210165416.5629-1-hsweeten@visionengravers.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()Boris Ostrovsky
rx_refill_timer should be deleted as soon as we disconnect from the backend since otherwise it is possible for the timer to go off before we get to xennet_destroy_queues(). If this happens we may dereference queue->rx.sring which is set to NULL in xennet_disconnect_backend(). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10NET: mkiss: Fix panicRalf Baechle
If a USB-to-serial adapter is unplugged, the driver re-initializes, with dev->hard_header_len and dev->addr_len set to zero, instead of the correct values. If then a packet is sent through the half-dead interface, the kernel will panic due to running out of headroom in the skb when pushing for the AX.25 headers resulting in this panic: [<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50) [<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25]) [<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss]) [<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8) [<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914) [<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0) [<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48) This patch makes mkiss behave like the 6pack driver. 6pack does not panic. In 6pack.c sp_setup() (same function name here) the values for dev->hard_header_len and dev->addr_len are set to the same values as in my mkiss patch. [ralf@linux-mips.org: Massages original submission to conform to the usual standards for patch submissions.] Signed-off-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10net: hns: Fix the device being used for dma mapping during TXKejian Yan
This patch fixes the device being used to DMA map skb->data. Erroneous device assignment causes the crash when SMMU is enabled. This happens during TX since buffer gets DMA mapped with device correspondign to net_device and gets unmapped using the device related to DSAF. Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10dt-bindings: mtd: add a common label property to all mtd devicesCédric Le Goater
This can be used to easily identify a specific chip on a system with multiple chips. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-10mtd: name the mtd device with an optional label propertyCédric Le Goater
This can be used to easily identify a specific chip on a system with multiple chips. Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-02-10Merge tag 'spi-nor/for-4.11-v2' of git://github.com/spi-nor/linuxBrian Norris
From Cyrille: """ This pull request contains the following notable changes: - add support to the 4-byte address instruction set. - add support to new memory parts. - add support to S3AN memories. - add support to the Intel SPI controller. - add support to the Aspeed AST2400 and AST2550 controllers. - fix max SPI transfer and message sizes in m25p80_read(). - fix the Candence QSPI driver. - fix the Freescale QSPI driver. """
2017-02-10mtd: physmap_of: fixup gemini/versatile dependenciesBrian Norris
physmap_of sort of depends on the gemini and versatile modules (when they're enabled), but this isn't expressed in Kconfig. Let's just merge the modules all together, when enabled. Then we can avoid exporting a few symbols, and the versatile and gemini code can now be modular again (the below commit accidentally made them built-in only). Resolves errors like this: ERROR: "of_flash_probe_versatile" [drivers/mtd/maps/physmap_of.ko] undefined! ERROR: "of_flash_probe_gemini" [drivers/mtd/maps/physmap_of.ko] undefined! Fixes: 56ff337ea433 ("mtd: physmap_of: add a hook for Gemini flash probing") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-10Merge branches 'iommu/fixes', 'arm/exynos', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel
'arm/mediatek', 'arm/core', 'x86/vt-d' and 'core' into next
2017-02-10vfio/type1: Fix error return code in vfio_iommu_type1_attach_group()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 5d704992189f ("vfio/type1: Allow transparent MSI IOVA allocation") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10iommu: Remove iommu_register_instance interfaceJoerg Roedel
And also move its remaining functionality to iommu_device_register() and 'struct iommu_device'. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10iommu/exynos: Make use of iommu_device_register interfaceJoerg Roedel
Register Exynos IOMMUs to the IOMMU core and make them visible in sysfs. This patch does not add the links between IOMMUs and translated devices yet. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10Merge tag 'irqchip-fixes-4.10' of ↵Thomas Gleixner
git://git.infradead.org/users/jcooper/linux into irq/urgent Pull irqchip fixes for v4.10 from Jason Cooper - keystone: Fix scheduling while atomic for realtime - mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
2017-02-10irqdesc: Add a resource managed version of irq_alloc_descs()Bartosz Golaszewski
Add a devres flavor of __devm_irq_alloc_descs() and corresponding helper macros. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Link: http://lkml.kernel.org/r/1486729403-21132-1-git-send-email-bgolaszewski@baylibre.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10mtd: spi-nor: cqspi: remove redundant dead code on error return checkColin Ian King
Checking for ret < 0 is redundant because a previous check on ret being non-zero already handles the ret < 0 case. Remove the redundant code. Found by CoverityScan, CID#1398863, CID#1398864 Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10Documentation: mtk-quadspi: update DT bindingsGuochun Mao
Add "mediatek,mt2701-nor" for nor flash node's compatible. Signed-off-by: Guochun Mao <guochun.mao@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READYunhui Cui
There are some read modes for flash, such as NORMAL, FAST, QUAD, DDR QUAD. These modes will use the identical lut table base So rename SEQID_QUAD_READ to SEQID_READ. Signed-off-by: Yunhui Cui <B56489@freescale.com> Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd:fsl-quadspi:use the property fields of SPI-NORYunhui Cui
We can get the read/write/erase opcode from the spi nor framework directly. This patch uses the information stored in the SPI-NOR to remove the hardcode in the fsl_qspi_init_lut(). Signed-off-by: Yunhui Cui <B56489@freescale.com> Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: Add support for gd25q16Kamal Dasu
Add GigaDevice GD25Q16 (16M-bit) to supported list. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: Fix S3AN addressing calculationRicardo Ribalda
The page calculation under spi_nor_s3an_addr_convert() was wrong. On Default Address Mode we need to perform a divide by page_size. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: aspeed: fix compile warning in aspeed_smc_read_from_ahb()Cédric Le Goater
The first argument of ioread32_rep() and ioread8_rep is not const. Change aspeed_smc_read_from_ahb() prototype to fix compile warning : drivers/mtd/spi-nor/aspeed-smc.c: In function 'aspeed_smc_read_from_ahb': drivers/mtd/spi-nor/aspeed-smc.c:212:16: warning: passing argument 1 of 'ioread32_rep' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ioread32_rep(src, buf, len >> 2); Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: add dt support for Everspin MRAMsUwe Kleine-König
The MR25 family doesn't support JEDEC, so they need explicit mentioning in the list of supported spi IDs. This makes it possible to add these using for example: compatible = "everspin,mr25h40"; There was already an entry for mr25h256. Move that one out of the "keep for compatibility" section and put in a new group for Everspin MRAMs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10Merge tag 'ib-mfd-mtd-v4.11' of ↵Cyrille Pitchen
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd From Lee Jones: """ Immutable branch between MFD and MTD due for the v4.11 merge window """
2017-02-10mtd: spi-nor: Add lock/unlock support for f25l32paVictor Shyba
This chip has write protection enabled on power-up, so this flag is necessary to support write operations. Signed-off-by: Victor Shyba <victor1984@riseup.net> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: add a stateless method to support memory size above 128MibCyrille Pitchen
This patch provides an alternative mean to support memory above 16MiB (128Mib) by replacing 3byte address op codes by their associated 4byte address versions. Using the dedicated 4byte address op codes doesn't change the internal state of the SPI NOR memory as opposed to using other means such as updating a Base Address Register (BAR) and sending command to enter/leave the 4byte mode. Hence when a CPU reset occurs, early bootloaders don't need to be aware of BAR value or 4byte mode being enabled: they can still access the first 16MiB of the SPI NOR memory using the regular 3byte address op codes. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Tested-by: Vignesh R <vigneshr@ti.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2017-02-10mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codesCyrille Pitchen
This patch renames the SPINOR_OP_* macros of the 4-byte address instruction set so the new names all share a common pattern: the 4-byte address name is built from the 3-byte address name appending the "_4B" suffix. The patch also introduces new op codes to support other SPI protocols such as SPI 1-4-4 and SPI 1-2-2. This is a transitional patch and will help a later patch of spi-nor.c to automate the translation from the 3-byte address op codes into their 4-byte address version. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2017-02-10mtd: m25p80: consider max message size in m25p80_readHeiner Kallweit
Consider a message size limit when calculating the maximum amount of data that can be read. The message size limit has been introduced with 4.9, so cc it to stable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: bindings for the Aspeed memory controllersCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
generated by cgit (git 2.34.1) at 2025-09-11 17:10:25 +0000