summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-02sparc32: mm: Don't try to free page-table pages if ctor() failsWill Deacon
The pages backing page-table allocations for SRMMU are allocated via memblock as part of the "nocache" region initialisation during srmmu_paging_init() and should not be freed even if a later call to pgtable_pte_page_ctor() fails. Remove the broken call to __free_page(). Cc: David S. Miller <davem@davemloft.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Fixes: 1ae9ae5f7df7 ("sparc: handle pgtable_page_ctor() fail") Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02sparc32: register memory occupied by kernel as memblock.memoryMike Rapoport
sparc32 never registered the memory occupied by the kernel image with memblock_add() and it only reserved this memory with meblock_reserve(). With openbios as system firmware, the memory occupied by the kernel is reserved in openbios and removed from mem.available. The prom setup code in the kernel uses mem.available to set up the memory banks and essentially there is a hole for the memory occupied by the kernel image. Later in bootmem_init() this memory is memblock_reserve()d. Up until recently, memmap initialization would call __init_single_page() for the pages in that hole, the free_low_memory_core_early() would mark them as reserved and everything would be Ok. After the change in memmap initialization introduced by the commit "mm: memmap_init: iterate over memblock regions rather that check each PFN", the hole is skipped and the page structs for it are not initialized. And when they are passed from memblock to page allocator as reserved, the latter gets confused. Simply registering the memory occupied by the kernel with memblock_add() resolves this issue. Tested on qemu-system-sparc with Debian Etch [1] userspace. [1] https://people.debian.org/~aurel32/qemu/sparc/debian_etch_sparc_small.qcow2 Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lkml.kernel.org/r/20200517000050.GA87467@roeck-us.nlllllet/ Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02sparc: remove unused header file nfs_fs.hAnupam Aggarwal
Remove unused header file linux/nfs_fs.h Signed-off-by: Anupam Aggarwal <anupam.al@samsung.com> Signed-off-by: Vivek Trivedi <t.vivek@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02Merge branch 'next-general' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull lockdown update from James Morris: "An update for the security subsystem to allow unprivileged users to see the status of the lockdown feature. From Jeremy Cline" Also an added comment to describe CAP_SETFCAP. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: capabilities: add description for CAP_SETFCAP lockdown: Allow unprivileged users to see lockdown status
2020-06-02IB/hfi1: Use free_netdev() in hfi1_netdev_free()YueHaibing
dummy_netdev shold be freed by free_netdev() instead of kfree(). Also remove unneeded variable 'priv' Fixes: 4730f4a6c6b2 ("IB/hfi1: Activate the dummy netdev") Link: https://lore.kernel.org/r/20200602061635.31224-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02Merge tag 'selinux-pr-20200601' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux updates from Paul Moore: "The highlights: - A number of improvements to various SELinux internal data structures to help improve performance. We move the role transitions into a hash table. In the content structure we shift from hashing the content string (aka SELinux label) to the structure itself, when it is valid. This last change not only offers a speedup, but it helps us simplify the code some as well. - Add a new SELinux policy version which allows for a more space efficient way of storing the filename transitions in the binary policy. Given the default Fedora SELinux policy with the unconfined module enabled, this change drops the policy size from ~7.6MB to ~3.3MB. The kernel policy load time dropped as well. - Some fixes to the error handling code in the policy parser to properly return error codes when things go wrong" * tag 'selinux-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: netlabel: Remove unused inline function selinux: do not allocate hashtabs dynamically selinux: fix return value on error in policydb_read() selinux: simplify range_write() selinux: fix error return code in policydb_read() selinux: don't produce incorrect filename_trans_count selinux: implement new format of filename transitions selinux: move context hashing under sidtab selinux: hash context structure directly selinux: store role transitions in a hash table selinux: drop unnecessary smp_load_acquire() call selinux: fix warning Comparison to bool
2020-06-02Merge tag 'audit-pr-20200601' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Summary of the significant patches: - Record information about binds/unbinds to the audit multicast socket. This helps identify which processes have/had access to the information in the audit stream. - Cleanup and add some additional information to the netfilter configuration events collected by audit. - Fix some of the audit error handling code so we don't leak network namespace references" * tag 'audit-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: add subj creds to NETFILTER_CFG record to audit: Replace zero-length array with flexible-array audit: make symbol 'audit_nfcfgs' static netfilter: add audit table unregister actions audit: tidy and extend netfilter_cfg x_tables audit: log audit netlink multicast bind and unbind audit: fix a net reference leak in audit_list_rules_send() audit: fix a net reference leak in audit_send_reply()
2020-06-02Merge tag 'tomoyo-pr-20200601' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1Linus Torvalds
Pull tomoyo update from Tetsuo Handa: "One patch for suppressing coccicheck's warning" * tag 'tomoyo-pr-20200601' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: tomoyo: use true for bool variable
2020-06-02RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()Dan Carpenter
The "dmac" variable is used before it is initialized. Fixes: 494c3b312255 ("RDMA/hns: Refactor the QP context filling process related to WQE buffer configure") Link: https://lore.kernel.org/r/20200529083918.GA1298465@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/core: Move and rename trace_cm_id_create()Chuck Lever
The restrack ID for an rdma_cm_id is not assigned until it is associated with a device. Here's an example I captured while testing NFS/RDMA's support for DEVICE_REMOVAL. The new tracepoint name is "cm_id_attach". <...>-4261 [001] 366.581299: cm_event_handler: cm.id=0 src=0.0.0.0:45919 dst=192.168.2.55:20049 tos=0 ADDR_ERROR (1/-19) <...>-4261 [001] 366.581304: cm_event_done: cm.id=0 src=0.0.0.0:45919 dst=192.168.2.55:20049 tos=0 ADDR_ERROR consumer returns 0 <...>-1950 [000] 366.581309: cm_id_destroy: cm.id=0 src=0.0.0.0:45919 dst=192.168.2.55:20049 tos=0 <...>-7 [001] 369.589400: cm_event_handler: cm.id=0 src=0.0.0.0:49023 dst=192.168.2.55:20049 tos=0 ADDR_ERROR (1/-19) <...>-7 [001] 369.589404: cm_event_done: cm.id=0 src=0.0.0.0:49023 dst=192.168.2.55:20049 tos=0 ADDR_ERROR consumer returns 0 <...>-1950 [000] 369.589407: cm_id_destroy: cm.id=0 src=0.0.0.0:49023 dst=192.168.2.55:20049 tos=0 <...>-4261 [001] 372.597650: cm_id_attach: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 device=mlx4_0 <...>-4261 [001] 372.597652: cm_event_handler: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ADDR_RESOLVED (0/0) <...>-4261 [001] 372.597654: cm_event_done: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ADDR_RESOLVED consumer returns 0 <...>-4261 [001] 372.597738: cm_event_handler: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ROUTE_RESOLVED (2/0) <...>-4261 [001] 372.597740: cm_event_done: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ROUTE_RESOLVED consumer returns 0 <...>-4691 [007] 372.600101: cm_qp_create: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 pd.id=2 qp_type=RC send_wr=4091 recv_wr=256 qp_num=530 rc=0 <...>-4691 [007] 372.600207: cm_send_req: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 qp_num=530 <...>-185 [002] 372.601212: cm_send_mra: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 <...>-185 [002] 372.601362: cm_send_rtu: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 <...>-185 [002] 372.601372: cm_event_handler: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ESTABLISHED (9/0) <...>-185 [002] 372.601379: cm_event_done: cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ESTABLISHED consumer returns 0 Fixes: ed999f820a6c ("RDMA/cma: Add trace points in RDMA Connection Manager") Link: https://lore.kernel.org/r/20200530174934.21362.56754.stgit@manet.1015granger.net Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02IB/hfi1: Fix hfi1_netdev_rx_init() error handlingDan Carpenter
The hfi1_vnic_up() function doesn't check whether hfi1_netdev_rx_init() returns errors. In hfi1_vnic_init() we need to change the code to preserve the error code instead of returning success. Fixes: 2280740f01ae ("IB/hfi1: Virtual Network Interface Controller (VNIC) HW support") Fixes: 4730f4a6c6b2 ("IB/hfi1: Activate the dummy netdev") Link: https://lore.kernel.org/r/20200530140224.GA1330098@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA: Remove 'max_map_per_fmr'Jason Gunthorpe
Now that FMR support is gone, this attribute can be deleted from all places. Link: https://lore.kernel.org/r/13-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA: Remove 'max_fmr'Jason Gunthorpe
Now that FMR support is gone, this attribute can be deleted from all places. Link: https://lore.kernel.org/r/12-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/core: Remove FMR device opsMax Gurtovoy
After removing FMR support from all the RDMA ULPs and providers, there is no need to keep FMR operation for IB devices. Link: https://lore.kernel.org/r/11-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/rdmavt: Remove FMR memory registrationMax Gurtovoy
Use FRWR method to register memory by default and remove the ancient and unsafe FMR method. Link: https://lore.kernel.org/r/10-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/mthca: Remove FMR support for memory registrationMax Gurtovoy
Remove the ancient and unsafe FMR method. Link: https://lore.kernel.org/r/9-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/mlx4: Remove FMR support for memory registrationMax Gurtovoy
HCA's that are driven by mlx4 driver support FRWR method to register memory. Remove the ancient and unsafe FMR method. Link: https://lore.kernel.org/r/8-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/i40iw: Remove FMR leftoversJason Gunthorpe
The ibfmr member is never referenced, remove it. Link: https://lore.kernel.org/r/7-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/bnxt_re: Remove FMR leftoversJason Gunthorpe
The bnxt_re_fmr struct is never referenced and the max_fmr items in bnxt_qplib_dev_attr are never read. Link: https://lore.kernel.org/r/6-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/mlx5: Remove FMR leftoversGal Pressman
Remove a few leftovers from FMR functionality which are no longer used. Link: https://lore.kernel.org/r/5-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/core: Remove FMR pool APIMax Gurtovoy
This ancient and unsafe method for memory registration is no longer used by any RDMA based ULP. Remove the FMR pool API from the core driver. Link: https://lore.kernel.org/r/4-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/rds: Remove FMR support for memory registrationMax Gurtovoy
Use FRWR method for memory registration by default and remove the ancient and unsafe FMR method. Link: https://lore.kernel.org/r/3-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/srp: Remove support for FMR memory registrationMax Gurtovoy
FMR is not supported on most recent RDMA devices (that use fast memory registration mechanism). Also, FMR was recently removed from NFS/RDMA ULP. Link: https://lore.kernel.org/r/2-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02RDMA/iser: Remove support for FMR memory registrationIsrael Rukshin
FMR is not supported on most recent RDMA devices (that use fast memory registration mechanism). Also, FMR was recently removed from NFS/RDMA ULP. Link: https://lore.kernel.org/r/1-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02capabilities: add description for CAP_SETFCAPStefan Hajnoczi
Document the purpose of CAP_SETFCAP. For some reason this capability had no description while the others did. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2020-06-02io_uring: disallow close of ring itselfJens Axboe
A previous commit enabled this functionality, which also enabled O_PATH to work correctly with io_uring. But we can't safely close the ring itself, as the file handle isn't reference counted inside io_uring_enter(). Instead of jumping through hoops to enable ring closure, add a "soft" ->needs_file option, ->needs_file_no_error. This enables O_PATH file descriptors to work, but still catches the case of trying to close the ring itself. Reported-by: Jann Horn <jannh@google.com> Fixes: 904fbcb115c8 ("io_uring: remove 'fd is io_uring' from close path") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-02block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failedyu kuai
commit e7bf90e5afe3 ("block/bio-integrity: fix a memory leak bug") added a kfree() for 'buf' if bio_integrity_add_page() returns '0'. However, the object will be freed in bio_integrity_free() since 'bio->bi_opf' and 'bio->bi_integrity' were set previousy in bio_integrity_alloc(). Fixes: commit e7bf90e5afe3 ("block/bio-integrity: fix a memory leak bug") Signed-off-by: yu kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-02selftests: net: ip_defrag: ignore EPERMThadeu Lima de Souza Cascardo
When running with conntrack rules, the dropped overlap fragments may cause EPERM to be returned to sendto. Instead of completely failing, just ignore those errors and continue. If this causes packets with overlap fragments to be dropped as expected, that is okay. And if it causes packets that are expected to be received to be dropped, which should not happen, it will be detected as failure. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02Merge tag 'for-5.8/io_uring-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring updates from Jens Axboe: "A relatively quiet round, mostly just fixes and code improvements. In particular: - Make statx just use the generic statx handler, instead of open coding it. We don't need that anymore, as we always call it async safe (Bijan) - Enable closing of the ring itself. Also fixes O_PATH closure (me) - Properly name completion members (me) - Batch reap of dead file registrations (me) - Allow IORING_OP_POLL with double waitqueues (me) - Add tee(2) support (Pavel) - Remove double off read (Pavel) - Fix overflow cancellations (Pavel) - Improve CQ timeouts (Pavel) - Async defer drain fixes (Pavel) - Add support for enabling/disabling notifications on a registered eventfd (Stefano) - Remove dead state parameter (Xiaoguang) - Disable SQPOLL submit on dying ctx (Xiaoguang) - Various code cleanups" * tag 'for-5.8/io_uring-2020-06-01' of git://git.kernel.dk/linux-block: (29 commits) io_uring: fix overflowed reqs cancellation io_uring: off timeouts based only on completions io_uring: move timeouts flushing to a helper statx: hide interfaces no longer used by io_uring io_uring: call statx directly statx: allow system call to be invoked from io_uring io_uring: add io_statx structure io_uring: get rid of manual punting in io_close io_uring: separate DRAIN flushing into a cold path io_uring: don't re-read sqe->off in timeout_prep() io_uring: simplify io_timeout locking io_uring: fix flush req->refs underflow io_uring: don't submit sqes when ctx->refs is dying io_uring: async task poll trigger cleanup io_uring: add tee(2) support splice: export do_tee() io_uring: don't repeat valid flag list io_uring: rename io_file_put() io_uring: remove req->needs_fixed_files io_uring: cleanup io_poll_remove_one() logic ...
2020-06-02Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "On top of the core changes, here are the block driver changes for this merge window: - NVMe changes: - NVMe over Fibre Channel protocol updates, which also reach over to drivers/scsi/lpfc (James Smart) - namespace revalidation support on the target (Anthony Iliopoulos) - gcc zero length array fix (Arnd Bergmann) - nvmet cleanups (Chaitanya Kulkarni) - misc cleanups and fixes (me, Keith Busch, Sagi Grimberg) - use a SRQ per completion vector (Max Gurtovoy) - fix handling of runtime changes to the queue count (Weiping Zhang) - t10 protection information support for nvme-rdma and nvmet-rdma (Israel Rukshin and Max Gurtovoy) - target side AEN improvements (Chaitanya Kulkarni) - various fixes and minor improvements all over, icluding the nvme part of the lpfc driver" - Floppy code cleanup series (Willy, Denis) - Floppy contention fix (Jiri) - Loop CONFIGURE support (Martijn) - bcache fixes/improvements (Coly, Joe, Colin) - q->queuedata cleanups (Christoph) - Get rid of ioctl_by_bdev (Christoph, Stefan) - md/raid5 allocation fixes (Coly) - zero length array fixes (Gustavo) - swim3 task state fix (Xu)" * tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits) bcache: configure the asynchronous registertion to be experimental bcache: asynchronous devices registration bcache: fix refcount underflow in bcache_device_free() bcache: Convert pr_<level> uses to a more typical style bcache: remove redundant variables i and n lpfc: Fix return value in __lpfc_nvme_ls_abort lpfc: fix axchg pointer reference after free and double frees lpfc: Fix pointer checks and comments in LS receive refactoring nvme: set dma alignment to qword nvmet: cleanups the loop in nvmet_async_events_process nvmet: fix memory leak when removing namespaces and controllers concurrently nvmet-rdma: add metadata/T10-PI support nvmet: add metadata support for block devices nvmet: add metadata/T10-PI support nvme: add Metadata Capabilities enumerations nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len nvmet: rename nvmet_rw_len to nvmet_rw_data_len nvmet: add metadata characteristics for a namespace nvme-rdma: add metadata/T10-PI support nvme-rdma: introduce nvme_rdma_sgl structure ...
2020-06-02net_failover: fixed rollback in net_failover_open()Vasily Averin
found by smatch: drivers/net/net_failover.c:65 net_failover_open() error: we previously assumed 'primary_dev' could be null (see line 43) Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
2020-06-02mm/migrate.c: attach_page_private already does the get_pageHugh Dickins
Just finished bisecting mmotm, to find why a test which used to take four minutes now took more than an hour: the __buffer_migrate_page() cleanup left behind a get_page() which attach_page_private() now does. Fixes: cd0f37154443 ("mm/migrate.c: call detach_page_private to cleanup code") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02Merge branch 'tipc-revert-two-patches'David S. Miller
Tuong Lien says: ==================== tipc: revert two patches We revert two patches: tipc: Fix potential tipc_node refcnt leak in tipc_rcv tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv which prevented TIPC encryption from working properly and caused kernel panic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"Tuong Lien
This reverts commit 441870ee4240cf67b5d3ab8e16216a9ff42eb5d6. Like the previous patch in this series, we revert the above commit that causes similar issues with the 'aead' object. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"Tuong Lien
This reverts commit de058420767df21e2b6b0f3bb36d1616fb962032. There is no actual tipc_node refcnt leak as stated in the above commit. The refcnt is hold carefully for the case of an asynchronous decryption (i.e. -EINPROGRESS/-EBUSY and skb = NULL is returned), so that the node object cannot be freed in the meantime. The counter will be re-balanced when the operation's callback arrives with the decrypted buffer if any. In other cases, e.g. a synchronous crypto the counter will be decreased immediately when it is done. Now with that commit, a kernel panic will occur when there is no node found (i.e. n = NULL) in the 'tipc_rcv()' or a premature release of the node object. This commit solves the issues by reverting the said commit, but keeping one valid case that the 'skb_linearize()' is failed. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Tested-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02vmxnet3: allow rx flow hash ops only when rss is enabledRonak Doshi
It makes sense to allow changes to get/set rx flow hash callback only when rss is enabled. This patch restricts get_rss_hash_opts and set_rss_hash_opts methods to allow querying and configuring different Rx flow hash configurations only when rss is enabled Signed-off-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02hinic: add set_channels ethtool_ops supportLuo bin
add support to change TX/RX queue number with "ethtool -L combined". V5 -> V6: remove check for carrier in hinic_xmit_frame V4 -> V5: change time zone in patch header V3 -> V4: update date in patch header V2 -> V3: remove check for zero channels->combined_count V1 -> V2: update commit message("ethtool -L" to "ethtool -L combined") V0 -> V1: remove check for channels->tx_count/rx_count/other_count Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-06-02 The following pull-request contains BPF _fixes-only_ for your *net-next* tree. We've added 10 non-merge commits during the last 1 day(s) which contain a total of 15 files changed, 229 insertions(+), 74 deletions(-). The main changes are: 1) Several fixes to s390 BPF JIT e.g. fixing kernel panic when BPF stack is not 8-byte aligned, from Ilya Leoshkevich. 2) Fix bpf_skb_adjust_room() helper's CHECKSUM_UNNECESSARY handling which was wrongly bypassing TCP checksum verification, from Daniel Borkmann. 3) Fix tools/bpf/ build under MAKEFLAGS=rR which causes built-in CXX and others vars to be undefined, also from Ilya Leoshkevich. 4) Fix BPF ringbuf's selftest shared sample_cnt variable to avoid compiler optimizations on it, from Andrii Nakryiko. 5) Fix up test_verifier selftest due to addition of rx_queue_mapping to the bpf_sock structure, from Alexei Starovoitov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ...
2020-06-02Merge tag 'for-linus-hmm' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This series adds a selftest for hmm_range_fault() and several of the DEVICE_PRIVATE migration related actions, and another simplification for hmm_range_fault()'s API. - Simplify hmm_range_fault() with a simpler return code, no HMM_PFN_SPECIAL, and no customizable output PFN format - Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related functionality" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: MAINTAINERS: add HMM selftests mm/hmm/test: add selftests for HMM mm/hmm/test: add selftest driver for HMM mm/hmm: remove the customizable pfn format from hmm_range_fault mm/hmm: remove HMM_PFN_SPECIAL drm/amdgpu: remove dead code after hmm_range_fault() mm/hmm: make hmm_range_fault return 0 or -1
2020-06-02ubi: Select fastmap anchor PEBs considering wear level rulesArne Edholm
There is a risk that the fastmap anchor PEB is alternating between just two PEBs, the current anchor and the previous anchor that was just deleted. As the fastmap pools gets the first take on free PEBs, the pools may leave no free PEBs to be selected as the new anchor, resulting in the two PEBs alternating behaviour. If the anchor PEBs gets a high erase count the PEBs will not be used by the pools but remain in ubi->free, even more increasing the likelihood they will be used as anchors. Getting stuck using only a couple of PEBs continuously will result in an uneven wear, eventually leading to failure. To fix this: - Choose the fastmap anchor when the most free PEBs are available. This is during rebuilding of the fastmap pools, after the unused pool PEBs are added to ubi->free but before the pools are populated again from the free PEBs. Also reserve an additional second best PEB as a candidate for the next time the fast map anchor is updated. If a better PEB is found the next time the fast map anchor is updated, the candidate is made available for building the pools. - Enable anchor move within the anchor area again as it is useful for distributing wear. - The anchor candidate for the next fastmap update is the most suited free PEB. Check this PEB's erase count during wear leveling. If the wear leveling limit is exceeded, the PEB is considered unsuitable for now. As all other non used anchor area PEBs should be even worse, free up the used anchor area PEB with the lowest erase count. Signed-off-by: Arne Edholm <arne.edholm@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02um: virtio: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02um: Use fdatasync() when mapping the UBD FSYNC commandAnton Ivanov
We do not need to update the metadata (atime, mtime, etc) on the UBD file and/or the COW file until UML exits. UBD image mtime is checked in UML only when opening the files. After that they are locked and used exclusively by a single UML instance, so there is no point wasting resources on updating metadata on every sync. We can sync data only. The host will always update mtime if a file has been modified upon closing it. Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02um: Do not evaluate compiler's library path when cleaningMasahiro Yamada
Since commit a83e4ca26af8 ("kbuild: remove cc-option switch from -Wframe-larger-than="), 'make ARCH=um clean' emits an error message as follows: $ make ARCH=um clean gcc: error: missing argument to '-Wframe-larger-than=' We do not care compiler flags when cleaning. Use the '=' operator for lazy expansion because we do not use LDFLAGS_pcap.o or LDFLAGS_vde.o when cleaning. While I was here, I removed the redundant -r option because it already exists in the recipe. Fixes: a83e4ca26af8 ("kbuild: remove cc-option switch from -Wframe-larger-than=") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> [build] Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02um: Neaten vu_err macro definitionJoe Perches
Defining a macro with ... and __VA_ARGS__ (without ##) can cause compilation errors if a macro use does not have additional args. Add ## to __VA_ARGS__ in the macro definition. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02um: Add a generic "fd" vector transportMarc-André Lureau
Learn to take a pre-opened file-descriptor for vector IO. Instead of teaching the driver to open a FD in multiple ways, it can rely on management layer to do it on its behalf. For example, this allows inheriting a preconfigured device fd or a simple socketpair() setup, without further arguments, privileges or system access by UML. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02um: Add include: memset() and memcpy() are in <string.h>Zach van Rijn
These two functions are otherwise unknown to the pedantic compiler. Include the correct header to enable the build to succeed. Signed-off-by: Zach van Rijn <me@zv.io> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02Merge tag 'pnp-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull PNP update from Rafael Wysocki: "Replace a zero-length array with a flexible-array (Gustavo A. R. Silva)" * tag 'pnp-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PNPBIOS: Replace zero-length array with flexible-array
2020-06-02Merge tag 'acpi-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20200430, fix several reference counting errors related to ACPI tables, add _Exx / _Lxx support to the GED driver, add a new acpi_evaluate_reg() helper, add new DPTF battery participant driver and extend the DPFT power participant driver, improve the handling of memory failures in the APEI code, add a blacklist entry to the backlight driver, update the PMIC driver and the processor idle driver, fix two kobject reference count leaks, and make a few janitory changes. Specifics: - Update the ACPICA code in the kernel to upstream revision 20200430: - Move acpi_gbl_next_cmd_num definition (Erik Kaneda). - Ignore AE_ALREADY_EXISTS status in the disassembler when parsing create operators (Erik Kaneda). - Add status checks to the dispatcher (Erik Kaneda). - Fix required parameters for _NIG and _NIH (Erik Kaneda). - Make acpi_protocol_lengths static (Yue Haibing). - Fix ACPI table reference counting errors in several places, mostly in error code paths (Hanjun Guo). - Extend the Generic Event Device (GED) driver to support _Exx and _Lxx handler methods (Ard Biesheuvel). - Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug code to use it (Hans de Goede). - Add new DPTF battery participant driver and make the DPFT power participant driver create more sysfs device attributes (Srinivas Pandruvada). - Improve the handling of memory failures in APEI (James Morse). - Add new blacklist entry for Acer TravelMate 5735Z to the backlight driver (Paul Menzel). - Add i2c address for thermal control to the PMIC driver (Mauro Carvalho Chehab). - Allow the ACPI processor idle driver to work on platforms with only one ACPI C-state present (Zhang Rui). - Fix kobject reference count leaks in error code paths in two places (Qiushi Wu). - Delete unused proc filename macros and make some symbols static (Pascal Terjan, Zheng Zengkai, Zou Wei)" * tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe() ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile() ACPI: GED: use correct trigger type field in _Exx / _Lxx handling ACPI: DPTF: Add battery participant driver ACPI: DPTF: Additional sysfs attributes for power participant driver ACPI: video: Use native backlight on Acer TravelMate 5735Z arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work ACPI: APEI: Kick the memory_failure() queue for synchronous errors mm/memory-failure: Add memory_failure_queue_kick() ACPI / PMIC: Add i2c address for thermal control ACPI: GED: add support for _Exx / _Lxx handler methods ACPI: Delete unused proc filename macros ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper ACPI: utils: Add acpi_evaluate_reg() helper ACPI: debug: Make two functions static ACPI: sleep: Put the FACS table after using it ACPI: scan: Put SPCR and STAO table after using it ACPI: EC: Put the ACPI table after using it ACPI: APEI: Put the HEST table for error path ACPI: APEI: Put the error record serialization table for error path ...
generated by cgit (git 2.34.1) at 2025-09-17 00:37:55 +0000