summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-09aacraid: IOCTL pass-through command fixMahesh Rajashekhara
The Linux aacriad driver fails to detect the case of SG list count=0 on IOCTL pass-through command and cause intermittent fault. The result is the Linux aacriad driver send down IOCTL pass-through command with one not initialized SG list to firmware when receiving SG list count =0 on pass-through command. Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09aacraid: AIF support for SES device add/removeMahesh Rajashekhara
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-04-09 We've had enough new patches during the past week (especially from Marcel) that it'd be good to still get these queued for 4.1. The majority of the changes are from Marcel with lots of cleanup & refactoring patches for the HCI UART driver. Marcel also split out some Broadcom & Intel vendor specific functionality into two new btintel & btbcm modules. In addition to the HCI driver changes there's the completion of our local OOB data interface for pairing, added support for requesting remote LE features when connecting, as well as a couple of minor fixes for mac802154. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09tcp: md5: fix a typo in tcp_v4_md5_lookup()Eric Dumazet
Lookup key for tcp_md5_do_lookup() has to be taken from addr_sk, not sk (which can be the listener) Fixes: fd3a154a00fb ("tcp: md5: get rid of tcp_v[46]_reqsk_md5_lookup()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09PCI: Read capability list as dwords, not bytesSean O. Stalley
Reading both the capability ID and "next" pointer at the same time lets us parse the list with half the number of config reads. Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09blk-mq: cleanup blk_mq_rq_to_pdu()Jens Axboe
Casting to void and adding the size of the request is "shit code" and only a "crazy monkey on crack" would write that. So lets clean it up. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-09Merge branch 'xgbe-next'David S. Miller
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2015-04-09 The following series of patches includes functional updates and changes to the driver. - Allow ethtool rx-frames coalescing to be changed while the device is up - Consolidate initialization routine into the init function - Add support for the TX watchdog timeout This patch series is based on net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09amd-xgbe: Add support for the netdev Tx watchdogLendacky, Thomas
Add support to be able to detect a hung Tx task by adding the netdev ndo_tx_timeout function callback. Do not set the watchdog_timeo value so as to use the system default time (currently 5 seconds). Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09amd-xgbe: Move Rx mode configuration into initLendacky, Thomas
Currently a call to configure the Rx mode (promiscuous mode, all multicast mode, etc.) is made in xgbe_start separate from the xgbe_init function. This call to set the Rx mode should be part of the xgbe_init function so that calls to the init function don't have to be preceded with calls to configure the Rx mode. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09amd-xgbe: Allow rx-frames coalescing to be changed anytimeLendacky, Thomas
Currently the device must be down in order to update the rx-frames coalescing setting because the interrupt indicator is set in the descriptor data during initialization. Allow this setting to be changed while the device is up by moving the interrupt decision into the descriptor reset function and base the decision off of the supplied descriptor index value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09net: Pass VLAN ID to rtnl_fdb_notify.Hubert Sokolowski
When an FDB entry is added or deleted the information about VLAN is not passed to listening applications like 'bridge monitor fdb'. With this patch VLAN ID is passed if it was set in the original netlink message. Also remove an unused bdev variable. Signed-off-by: Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09tcp: tcp_make_synack() should clear skb->tstampEric Dumazet
I noticed tcpdump was giving funky timestamps for locally generated SYNACK messages on loopback interface. 11:42:46.938990 IP 127.0.0.1.48245 > 127.0.0.2.23850: S 945476042:945476042(0) win 43690 <mss 65495,nop,nop,sackOK,nop,wscale 7> 20:28:58.502209 IP 127.0.0.2.23850 > 127.0.0.1.48245: S 3160535375:3160535375(0) ack 945476043 win 43690 <mss 65495,nop,nop,sackOK,nop,wscale 7> This is because we need to clear skb->tstamp before entering lower stack, otherwise net_timestamp_check() does not set skb->tstamp. Fixes: 7faee5c0d514 ("tcp: remove TCP_SKB_CB(skb)->when") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09Merge branches 'pm-sleep', 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki
* pm-sleep: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" * pm-cpufreq: cpufreq: Schedule work for the first-online CPU on resume * pm-cpuidle: cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device
2015-04-09ipr: Driver version 2.6.1Brian King
Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09ipr: AF DASD raw mode implementation in ipr driverWen Xiong
This patch implements raw mode support for AF DASD in ipr driver which allows for tools to send commands directly to physical devices which are members of RAID arrays when enabled in the firmware. [jejb: fix up whitespace] Signed-off-by: Wen Xiong<wenxiong@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09ipr: Re-enable write sameBrian King
Re-enable write same support for ipr RAID adapters. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09ipr: Fix possible error path oops during initializationBrian King
Fixes a possible oops during adapter initialization in some memory allocation failure error paths scenarios. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09ipr: Reset in task contextBrian King
The pci_set_pcie_reset_state has changed semantics to not be callable from interrupt context, so change ipr's usage of the API to comply with this change by ensuring this occurs from a workqueue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09ipr: Reboot speed improvementsBrian King
Currently when performing a reboot with an ipr adapter, the adapter gets shutdown completely, flushing all write cache, as well as performing a full hardware reset of the card during the shutdown phase of the old kernel. This ensures the adapter is in a fully quiesced state across the reboot. There are scenarios, however, such as when performing kexec, where this full adapter shutdown is not required and not desired, since it can make the reboot process take noticeably longer. This patch adds a module parameter to allow for skipping the full shutdown during reboot. Rather than performing a full adapter shutdown and reset, we simply cancel any outstanding error buffers, place the adapter into a state where it has no memory of any DMA addresses from the old kernel, then disable the device. This significantly speeds up kexec boot, particularly in configurations with multiple ipr adapters. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Set the tablesize based on the information given by the hostK. Y. Srinivasan
Set the tablesize based on the information given by the host. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Tested-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Don't assume that the scatterlist is not chainedK. Y. Srinivasan
The current code assumes that the scatterlists presented are not chained. Fix the code to not make this assumption. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Fix a bug in copy_from_bounce_buffer()K. Y. Srinivasan
We may exit this function without properly freeing up the maapings we may have acquired. Fix the bug. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Retrieve information about the capability of the targetK. Y. Srinivasan
The storage protocol informs the guest of the I/O capabilities of the storage stack. Retrieve this information and use it in the guest. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Always send on the selected outgoing channelK. Y. Srinivasan
The current code always sent packets without data on the primary channel. Properly distribute sending of packets with no data amongst all available channels. I would like to thank Long Li for noticing this problem. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Size the queue depth based on the ringbuffer sizeK. Y. Srinivasan
Size the queue depth based on the ringbuffer size. Also accommodate for the fact that we could have multiple channels (ringbuffers) per adaptor. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Increase the ring buffer sizeK. Y. Srinivasan
Increase the default ring buffer size as this can significantly improve performance especially on high latency storage back-ends. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09aic7xxx: replace kmalloc/memset by kzallocMichael Opdenacker
This replaces kmalloc + memset by a call to kzalloc This also fixes one checkpatch.pl issue in the process. This improvement was suggested by "make coccicheck" Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-04-09PCI: layerscape: Simplify platform_get_resource_byname() failure checkingBjorn Helgaas
devm_ioremap_resource() validates the resource it receives, so if we check for devm_ioremap_resource() failure, we need not check for failure of the preceding platform_get_resource(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: keystone: Don't dereference possible NULL pointerBjorn Helgaas
Check for failure from platform_get_resource() (this check actually happens inside devm_ioremap_resource()) before dereferencing the pointer returned from platform_get_resource(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: versatile: Check for devm_ioremap_resource() failuresJisheng Zhang
Check for failure of devm_ioremap_resource(). devm_ioremap_resource() validates the resource it receives, so if we check for devm_ioremap_resource() failure, we need not check for failure of the preceding platform_get_resource(). [bhelgaas: changelog] Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09PCI: Don't clear ASPM bits when the FADT declares it's unsupportedMatthew Garrett
Communications with a hardware vendor confirm that the expected behaviour on systems that set the FADT ASPM disable bit but which still grant full PCIe control is for the OS to leave any BIOS configuration intact and refuse to touch the ASPM bits. This mimics the behaviour of Windows. Signed-off-by: Matthew Garrett <mjg59@coreos.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09udptunnels: Call handle_offloads after inserting vlan tag.Jesse Gross
handle_offloads() calls skb_reset_inner_headers() to store the layer pointers to the encapsulated packet. However, we currently push the vlag tag (if there is one) onto the packet afterwards. This changes the MAC header for the encapsulated packet but it is not reflected in skb->inner_mac_header, which breaks GSO and drivers which attempt to use this for encapsulation offloads. Fixes: 1eaa8178 ("vxlan: Add tx-vlan offload support.") Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. They are: * nf_tables set timeout infrastructure from Patrick Mchardy. 1) Add support for set timeout support. 2) Add support for set element timeouts using the new set extension infrastructure. 4) Add garbage collection helper functions to get rid of stale elements. Elements are accumulated in a batch that are asynchronously released via RCU when the batch is full. 5) Add garbage collection synchronization helpers. This introduces a new element busy bit to address concurrent access from the netlink API and the garbage collector. 5) Add timeout support for the nft_hash set implementation. The garbage collector peridically checks for stale elements from the workqueue. * iptables/nftables cgroup fixes: 6) Ignore non full-socket objects from the input path, otherwise cgroup match may crash, from Daniel Borkmann. 7) Fix cgroup in nf_tables. 8) Save some cycles from xt_socket by skipping packet header parsing when skb->sk is already set because of early demux. Also from Daniel. * br_netfilter updates from Florian Westphal. 9) Save frag_max_size and restore it from the forward path too. 10) Use a per-cpu area to restore the original source MAC address when traffic is DNAT'ed. 11) Add helper functions to access physical devices. 12) Use these new physdev helper function from xt_physdev. 13) Add another nf_bridge_info_get() helper function to fetch the br_netfilter state information. 14) Annotate original layer 2 protocol number in nf_bridge info, instead of using kludgy flags. 15) Also annotate the pkttype mangling when the packet travels back and forth from the IP to the bridge layer, instead of using a flag. * More nf_tables set enhancement from Patrick: 16) Fix possible usage of set variant that doesn't support timeouts. 17) Avoid spurious "set is full" errors from Netlink API when there are pending stale elements scheduled to be released. 18) Restrict loop checks to set maps. 19) Add support for dynamic set updates from the packet path. 20) Add support to store optional user data (eg. comments) per set element. BTW, I have also pulled net-next into nf-next to anticipate the conflict resolution between your okfn() signature changes and Florian's br_netfilter updates. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09Merge tag 'wireless-drivers-next-for-davem-2015-04-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: iwlwifi: * some more work on LAR * fixes for UMAC scan * more work on debugging framework * more work for 8000 devices * cleanups and small bugfixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2015-04-09 1) Prohibit the use/abuse of the xfrm netlink interface on 32/64 bit compatibility tasks. We need a full compat layer before we can allow this. From Fan Du. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2015-04-09 1) We dereferenced the xfrm outer_mode too early, larval SAs don't have it set. Move the dereference of the outer mode below the larval SA check to fix it. From Alexey Dobriyan. 2) Fix vti6 tunnel uninit on namespace crosssing. From Yao Xiwei. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09usbnet: rename work handlerOliver Neukum
"kevent" is an extremely generic name that causes trouble if debugging for work queues is used. So change it to something clear. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09PCI: Clarify policy for vendor IDs in pci.txtMichael S. Tsirkin
Clarify pci.txt so it matches the "do not add new entries unless they are shared between multiple drivers" comment in include/linux/pci_ids.h. [bhelgaas: changelog, strengthen language] Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-09Merge branch 'dma_rmb_wmb'David S. Miller
Alexander Duyck says: ==================== Replace wmb()/rmb() with dma_wmb()/dma_rmb() where appropriate, round 2 More cleanup of drivers in order to start making use of dma_rmb and dma_wmb calls. This is another pass of what I would consider to be low hanging fruit. There may be other opportunities to make use of the barriers in the Mellanox and Chelsio drivers but I didn't want to risk meddling with code I was not completely familiar with so I am leaving that for future work. I have revisited the Mellanox driver changes. This time around I went only for the sections with a clearly defined pattern. For dma_wmb I used it between accesses of the descriptor bits followed by owner or size. For dma_rmb I used it to replace rmb following a read of the ownership bit in the descriptor. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09e100: Use dma_rmb/wmb where appropriateAlexander Duyck
Reduce the CPU overhead for transmit and receive by using lightweight dma_ barriers instead of full barriers where they are applicable. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09i40e/i40evf: Use dma_rmb where appropriateAlexander Duyck
Update i40e and i40evf to use dma_rmb. This should improve performance by decreasing the barrier overhead on strong ordered architectures. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09mlx4/mlx5: Use dma_wmb/rmb where appropriateAlexander Duyck
This patch should help to improve the performance of the mlx4 and mlx5 on a number of architectures. For example, on x86 the dma_wmb/rmb equates out to a barrer() call as the architecture is already strong ordered, and on PowerPC the call works out to a lwsync which is significantly less expensive than the sync call that was being used for wmb. I placed the new barriers between any spots that seemed to be trying to order memory/memory reads or writes, if there are any spots that involved MMIO I left the existing wmb in place as the new barriers cannot order transactions between coherent and non-coherent memories. v2: Reduced the replacments to just the spots where I could clearly identify the usage pattern. Cc: Amir Vadai <amirv@mellanox.com> Cc: Ido Shamay <idos@mellanox.com> Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09cxgb3/4/4vf: Update drivers to use dma_rmb/wmb where appropriateAlexander Duyck
Update the Chelsio Ethernet drivers to use the dma_rmb/wmb calls instead of the full barriers in order to improve performance. Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09stmmac: devm_reset_control_get can return PROBE_DEFERPhil Reid
In socfpga_dwmac_parse_data forward error code from devm_reset_control_get. This gives the driver another chance to laod if altr,rst-mgr is loaded after the network driver. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09mac802154: fix transmission power datatypeVarka Bhadram
Netlink attribute for the power is s8. But for the driver level operations we are collection power level value into integer. It has to be change to s8 from int. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-09Merge tag 'pci-v4.0-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are some fixes for v4.0. I apologize for how late they are. We were hoping for some better fixes, but couldn't get them polished in time. These fix: - a Xen domU oops with PCI passthrough devices - a sparc T5 boot failure - a STM SPEAr13xx crash (use after initdata freed) - a cpcihp hotplug driver thinko - an AER thinko that printed stack junk Details: Enumeration - Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas) Resource management - Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas) AER - Avoid info leak in __print_tlp_header() (Rasmus Villemoes) PCI device hotplug - Add missing curly braces in cpci_configure_slot() (Dan Carpenter) ST Microelectronics SPEAr13xx host bridge driver - Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov) * tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" PCI: Don't look for ACPI hotplug parameters if ACPI is disabled PCI: cpcihp: Add missing curly braces in cpci_configure_slot() PCI/AER: Avoid info leak in __print_tlp_header() PCI: spear: Drop __initdata from spear13xx_pcie_driver
2015-04-09kconfig: Do not print status messages in make -s modeMichal Marek
Add an -s option to the various frontends and pass it when make -s is used. Also, use $(kecho) instead of @echo in the Makefile. Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-09ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob supportDmitry M. Fedin
Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-09hwmon: (it87) Use feature macros on sio_dataGuenter Roeck
Feature macros work on sio_data as well, so use them there. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-09ALSA: hda/via - Add missing stream_pm ops setupTakashi Iwai
Similar like the case for Realtek, VIA codec driver needs this ops as well for making the widget power-save working. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-19 01:59:22 +0000