summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-19Linux 5.5-rc7Linus Torvalds
2020-01-19ubi: Fix an error pointer dereference in error handling codeDan Carpenter
If "seen_pebs = init_seen(ubi);" fails then "seen_pebs" is an error pointer and we try to kfree() it which results in an Oops. This patch re-arranges the error handling so now it only frees things which have been allocated successfully. Fixes: daef3dd1f0ae ("UBI: Fastmap: Add self check to detect absent PEBs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-19ubifs: Fix memory leak from c->sup_nodeQuanyang Wang
The c->sup_node is allocated in function ubifs_read_sb_node but is not freed. This will cause memory leak as below: unreferenced object 0xbc9ce000 (size 4096): comm "mount", pid 500, jiffies 4294952946 (age 315.820s) hex dump (first 32 bytes): 31 18 10 06 06 7b f1 11 02 00 00 00 00 00 00 00 1....{.......... 00 10 00 00 06 00 00 00 00 00 00 00 08 00 00 00 ................ backtrace: [<d1c503cd>] ubifs_read_superblock+0x48/0xebc [<a20e14bd>] ubifs_mount+0x974/0x1420 [<8589ecc3>] legacy_get_tree+0x2c/0x50 [<5f1fb889>] vfs_get_tree+0x28/0xfc [<bbfc7939>] do_mount+0x4f8/0x748 [<4151f538>] ksys_mount+0x78/0xa0 [<d59910a9>] ret_fast_syscall+0x0/0x54 [<1cc40005>] 0x7ea02790 Free it in ubifs_umount and in the error path of mount_ubifs. Fixes: fd6150051bec ("ubifs: Store read superblock node") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-19um: Fix time-travel=inf-cpu with xor/raid6Johannes Berg
Today, I erroneously built a time-travel configuration with btrfs enabled, and noticed it cannot boot in time-travel=inf-cpu mode, both xor and raid6 speed measurement gets stuck. For xor, work around it by picking the first algorithm if inf-cpu mode is enabled. For raid6, I didn't find such a workaround, so disallow enabling time-travel mode if RAID6_PQ_BENCHMARK is enabled. With this, and RAID6_PQ_BENCHMARK disabled, I can boot a kernel that has btrfs enabled in time-travel=inf-cpu mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-19Revert "um: Enable CONFIG_CONSTRUCTORS"Johannes Berg
This reverts commit 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS"). There are two issues with this commit, uncovered by Anton in tests on some (Debian) systems: 1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS isn't set. Don't recall now if it just wasn't needed on my system, or if I never tested this case. 2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I set CONFIG_CONSTRUCTORS, it fails again, which isn't totally unexpected since whatever wanted to run is likely to have to run before the kernel init etc. that calls the constructors in this case. Basically, some constructors that gcc emits (libc has?) need to run very early during init; the failure mode otherwise was that the ptrace fork test already failed: ---------------------- $ ./linux mem=512M Core dump limits : soft - 0 hard - NONE Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f Aborted ---------------------- Thinking more about this, it's clear that we simply cannot support CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan) involve not use of the __attribute__((constructor)), but instead some constructor code/entry generated by gcc. Therefore, we cannot distinguish between kernel constructors and system constructors. Thus, revert this commit. Cc: stable@vger.kernel.org [5.4+] Fixes: 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS") Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-19um: Mark non-vector net transports as obsoleteBrendan Higgins
UML_NET_VECTOR now supports filters compiled with pcap outside of UML; it also supports: EoGRE, EoL2TPv3, RAW (+/- BPF), TAP and BESS. While vector drivers are not 1:1 replacements for the existing drivers, you can achieve the same topologies and the same connectivity at much higher performance (2.5 to 9 Gbit on mid-range Ryzen desktop) - the old drivers test out in the 500Mbit range on the same hardware. For all these reasons, the non-vector based transports are now unnecessary, and some, most notably pcap and vde are maintenance burdens. Thus, it makes sense to at least start thinking about removing the non-vector transports, so for now, mark them as obsolete. Link: https://lore.kernel.org/lkml/15f048d3-07ab-61c1-c6e0-0712e626dd33@cambridgegreys.com/T/#u Suggested-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-19um: Add an option to make serial driver non-rawJohannes Berg
In some cases, for example when the program(s) running inside UML isn't/aren't interactive (like the hwsim tests for wpa_supplicant) there's really no value in having the serial lines configured to be raw as they are now by default. Setting them to non-raw lets one abort the whole UML with Ctrl-C, which is really the right thing to do in these cases, basically the whole UML instance is more like a single (testing) program. Add a "ssl-non-raw" option to UML to support such a mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-19Merge tag 'riscv/for-v5.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Three fixes for RISC-V: - Don't free and reuse memory containing the code that CPUs parked at boot reside in. - Fix rv64 build problems for ubsan and some modules by adding logical and arithmetic shift helpers for 128-bit values. These are from libgcc and are similar to what's present for ARM64. - Fix vDSO builds to clean up their own temporary files" * tag 'riscv/for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Less inefficient gcc tishift helpers (and export their symbols) riscv: delete temporary files riscv: make sure the cores stay looping in .Lsecondary_park
2020-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix non-blocking connect() in x25, from Martin Schiller. 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski. 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang. 4) Limit size of TSO packets properly in lan78xx driver, from Eric Dumazet. 5) r8152 probe needs an endpoint sanity check, from Johan Hovold. 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from John Fastabend. 7) hns3 needs short frames padded on transmit, from Yunsheng Lin. 8) Fix netfilter ICMP header corruption, from Eyal Birger. 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu. 10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan. 11) Fix memory leak in act_ctinfo, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: reject overlapped queues in TC-MQPRIO offload cxgb4: fix Tx multi channel port rate limit net: sched: act_ctinfo: fix memory leak bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal. bnxt_en: Fix ipv6 RFS filter matching logic. bnxt_en: Fix NTUPLE firmware command failures. net: systemport: Fixed queue mapping in internal ring map net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec net: dsa: sja1105: Don't error out on disabled ports with no phy-mode net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset net: hns: fix soft lockup when there is not enough memory net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() net/sched: act_ife: initalize ife->metalist earlier netfilter: nat: fix ICMP header corruption on ICMP errors net: wan: lapbether.c: Use built-in RCU list checking netfilter: nf_tables: fix flowtable list del corruption netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks() netfilter: nf_tables: remove WARN and add NLA_STRING upper limits netfilter: nft_tunnel: ERSPAN_VERSION must not be null netfilter: nft_tunnel: fix null-attribute check ...
2020-01-19Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two runtime PM fixes and one leak fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: iop3xx: Fix memory leak in probe error path i2c: tegra: Properly disable runtime PM on driver's probe error i2c: tegra: Fix suspending in active runtime PM state
2020-01-19KVM: arm/arm64: vgic: Drop the kvm_vgic_register_mmio_region()Zenghui Yu
kvm_vgic_register_mmio_region() was introduced in commit 4493b1c4866a ("KVM: arm/arm64: vgic-new: Add MMIO handling framework") but never used, and even never implemented. Remove it to avoid confusing readers. Reported-by: Haibin Wang <wanghaibin.wang@huawei.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200119090604.398-1-yuzenghui@huawei.com
2020-01-19KVM: arm/arm64: vgic-its: Properly check the unmapped coll in DISCARD handlerZenghui Yu
Discard is supposed to fail if the collection is not mapped to any target redistributor. We currently check if the collection is mapped by "ite->collection" but this is incomplete (e.g., mapping a LPI to an unmapped collection also results in a non NULL ite->collection). What actually needs to be checked is its_is_collection_mapped(), let's turn to it. Also take this chance to remove an extra blank line. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20200114112212.1411-1-yuzenghui@huawei.com
2020-01-19KVM: arm/arm64: Correct AArch32 SPSR on exception entryMark Rutland
Confusingly, there are three SPSR layouts that a kernel may need to deal with: (1) An AArch64 SPSR_ELx view of an AArch64 pstate (2) An AArch64 SPSR_ELx view of an AArch32 pstate (3) An AArch32 SPSR_* view of an AArch32 pstate When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either dealing with #2 or #3 consistently. On arm64 the PSR_AA32_* definitions match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions match the AArch32 SPSR_* view. However, when we inject an exception into an AArch32 guest, we have to synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64 host needs to synthesize layout #3 from layout #2. This patch adds a new host_spsr_to_spsr32() helper for this, and makes use of it in the KVM AArch32 support code. For arm64 we need to shuffle the DIT bit around, and remove the SS bit, while for arm we can use the value as-is. I've open-coded the bit manipulation for now to avoid having to rework the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_* definitions. I hope to perform a more thorough refactoring in future so that we can handle pstate view manipulation more consistently across the kernel tree. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200108134324.46500-4-mark.rutland@arm.com
2020-01-19KVM: arm/arm64: Correct CPSR on exception entryMark Rutland
When KVM injects an exception into a guest, it generates the CPSR value from scratch, configuring CPSR.{M,A,I,T,E}, and setting all other bits to zero. This isn't correct, as the architecture specifies that some CPSR bits are (conditionally) cleared or set upon an exception, and others are unchanged from the original context. This patch adds logic to match the architectural behaviour. To make this simple to follow/audit/extend, documentation references are provided, and bits are configured in order of their layout in SPSR_EL2. This layout can be seen in the diagram on ARM DDI 0487E.a page C5-426. Note that this code is used by both arm and arm64, and is intended to fuction with the SPSR_EL2 and SPSR_HYP layouts. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200108134324.46500-3-mark.rutland@arm.com
2020-01-19KVM: arm64: Correct PSTATE on exception entryMark Rutland
When KVM injects an exception into a guest, it generates the PSTATE value from scratch, configuring PSTATE.{M[4:0],DAIF}, and setting all other bits to zero. This isn't correct, as the architecture specifies that some PSTATE bits are (conditionally) cleared or set upon an exception, and others are unchanged from the original context. This patch adds logic to match the architectural behaviour. To make this simple to follow/audit/extend, documentation references are provided, and bits are configured in order of their layout in SPSR_EL2. This layout can be seen in the diagram on ARM DDI 0487E.a page C5-429. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200108134324.46500-2-mark.rutland@arm.com
2020-01-19KVM: arm/arm64: Re-check VMA on detecting a poisoned pageJames Morse
When we check for a poisoned page, we use the VMA to tell userspace about the looming disaster. But we pass a pointer to this VMA after having released the mmap_sem, which isn't a good idea. Instead, stash the shift value that goes with this pfn while we are holding the mmap_sem. Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Link: https://lore.kernel.org/r/20191211165651.7889-3-maz@kernel.org Link: https://lore.kernel.org/r/20191217123809.197392-1-james.morse@arm.com
2020-01-19KVM: arm: Remove duplicate includeYueHaibing
Remove duplicate header which is included twice. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20191113014045.15276-1-yuehaibing@huawei.com
2020-01-19KVM: ARM: Call hyp_cpu_pm_exit at the right placeShannon Zhao
It doesn't needs to call hyp_cpu_pm_exit() in init_hyp_mode() when some error occurs. hyp_cpu_pm_exit() only needs to be called in kvm_arch_init() if init_subsystems() fails. So move hyp_cpu_pm_exit() out from teardown_hyp_mode() and call it directly in kvm_arch_init(). Signed-off-by: Shannon Zhao <shannon.zhao@linux.alibaba.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1575272531-3204-1-git-send-email-shannon.zhao@linux.alibaba.com
2020-01-19ARM: 8950/1: ftrace/recordmcount: filter relocation typesAlex Sverdlin
Scenario 1, ARMv7 ================= If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer the following may be generated: 00000230 <prealloc_fixed_plts>: 230: b5f8 push {r3, r4, r5, r6, r7, lr} 232: b500 push {lr} 234: f7ff fffe bl 0 <__gnu_mcount_nc> 234: R_ARM_THM_CALL __gnu_mcount_nc 238: f240 0600 movw r6, #0 238: R_ARM_THM_MOVW_ABS_NC __gnu_mcount_nc 23c: f8d0 1180 ldr.w r1, [r0, #384] ; 0x180 FTRACE currently is not able to deal with it: WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230() ... CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1 ... [<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8) [<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90) [<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c) [<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230) [<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444) [<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8) [<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358) [<c0885a67>] (start_kernel) from [<00308095>] (0x308095) ---[ end trace cb88537fdc8fa200 ]--- ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60 actual: 44:f2:e1:36 ftrace record flags: 0 (0) expected tramp: c03143e9 Scenario 2, ARMv4T ================== ftrace: allocating 14435 entries in 43 pages ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310 CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1 Hardware name: Cirrus Logic EDB9302 Evaluation Board [<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c) [<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30) [<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104) [<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c) [<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310) [<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4) [<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410) [<c04cef4c>] (start_kernel) from [<00000000>] ( (null)) ---[ end trace 0506a2f5dae6b341 ]--- ftrace failed to modify [<c000c350>] perf_trace_sys_exit+0x5c/0xe8 actual: 1e:ff:2f:e1 Initializing ftrace call sites ftrace record flags: 0 (0) expected tramp: c000fb24 The analysis for this problem has been already performed previously, refer to the link below. Fix the above problems by allowing only selected reloc types in __mcount_loc. The list itself comes from the legacy recordmcount.pl script. Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/ Cc: stable@vger.kernel.org Fixes: ed60453fa8f8 ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-19arm64: kvm: Fix IDMAP overlap with HYP VARussell King
Booting 5.4 on LX2160A reveals that KVM is non-functional: kvm: Limiting the IPA size due to kernel Virtual Address limit kvm [1]: IPA Size Limit: 43bits kvm [1]: IDMAP intersecting with HYP VA, unable to continue kvm [1]: error initializing Hyp mode: -22 Debugging shows: kvm [1]: IDMAP page: 81a26000 kvm [1]: HYP VA range: 0:22ffffffff as RAM is located at: 80000000-fbdfffff : System RAM 2080000000-237fffffff : System RAM Comparing this with the same kernel on Armada 8040 shows: kvm: Limiting the IPA size due to kernel Virtual Address limit kvm [1]: IPA Size Limit: 43bits kvm [1]: IDMAP page: 2a26000 kvm [1]: HYP VA range: 4800000000:493fffffff ... kvm [1]: Hyp mode initialized successfully which indicates that hyp_va_msb is set, and is always set to the opposite value of the idmap page to avoid the overlap. This does not happen with the LX2160A. Further debugging shows vabits_actual = 39, kva_msb = 38 on LX2160A and kva_msb = 33 on Armada 8040. Looking at the bit layout of the HYP VA, there is still one bit available for hyp_va_msb. Set this bit appropriately. This allows KVM to be functional on the LX2160A, but without any HYP VA randomisation: kvm: Limiting the IPA size due to kernel Virtual Address limit kvm [1]: IPA Size Limit: 43bits kvm [1]: IDMAP page: 81a24000 kvm [1]: HYP VA range: 4000000000:62ffffffff ... kvm [1]: Hyp mode initialized successfully Fixes: ed57cac83e05 ("arm64: KVM: Introduce EL2 VA randomisation") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [maz: small additional cleanups, preserved case where the tag is legitimately 0 and we can just use the mask, Fixes tag] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/E1ilAiY-0000MA-RG@rmk-PC.armlinux.org.uk
2020-01-19KVM: arm/arm64: vgic: Handle GICR_PENDBASER.PTZ filed as RAZZenghui Yu
Although guest will hardly read and use the PTZ (Pending Table Zero) bit in GICR_PENDBASER, let us emulate the architecture strictly. As per IHI 0069E 9.11.30, PTZ field is WO, and reads as 0. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20191220111833.1422-1-yuzenghui@huawei.com
2020-01-19KVM: arm/arm64: vgic-its: Fix restoration of unmapped collectionsEric Auger
Saving/restoring an unmapped collection is a valid scenario. For example this happens if a MAPTI command was sent, featuring an unmapped collection. At the moment the CTE fails to be restored. Only compare against the number of online vcpus if the rdist base is set. Fixes: ea1ad53e1e31a ("KVM: arm64: vgic-its: Collection table save/restore") Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191213094237.19627-1-eric.auger@redhat.com
2020-01-19KVM: arm64: Only sign-extend MMIO up to register widthChristoffer Dall
On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit register, and we should only sign extend the register up to the width of the register as specified in the operation (by using the 32-bit Wn or 64-bit Xn register specifier). As it turns out, the architecture provides this decoding information in the SF ("Sixty-Four" -- how cute...) bit. Let's take advantage of this with the usual 32-bit/64-bit header file dance and do the right thing on AArch64 hosts. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.com
2020-01-19Merge branch 'mlxsw-Add-tunnel-devlink-trap-support'David S. Miller
Ido Schimmel says: ==================== mlxsw: Add tunnel devlink-trap support This patch set from Amit adds support in mlxsw for tunnel traps and a few additional layer 3 traps that can report drops and exceptions via devlink-trap. These traps allow the user to more quickly diagnose problems relating to tunnel decapsulation errors, such as packet being too short to decapsulate or a packet containing wrong GRE key in its GRE header. Patch set overview: Patches #1-#4 add three additional layer 3 traps. Two of which are mlxsw-specific as they relate to hardware-specific errors. The patches include documentation of each trap and selftests. Patches #5-#8 are preparations. They ensure that the correct ECN bits are set in the outer header during IPinIP encapsulation and that packets with an invalid ECN combination in underlay and overlay are trapped to the kernel and not decapsulated in hardware. Patches #9-#15 add support for two tunnel related traps. Each trap is documented and selftested using both VXLAN and IPinIP tunnels, if applicable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19selftests: devlink_trap_tunnel_vxlan: Add test case for overlay_smac_is_mcAmit Cohen
Test that the trap is triggered under the right conditions and that devlink counters increase when action is trap. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add OVERLAY_SMAC_MC trapAmit Cohen
Add a trap for NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19devlink: Add overlay source MAC is multicast trapAmit Cohen
Add packet trap that can report NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19selftests: devlink_trap_tunnel_ipip: Add test case for decap_errorAmit Cohen
Test that the trap is triggered under the right conditions and that devlink counters increase. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19selftests: devlink_trap_tunnel_vxlan: Add test case for decap_errorAmit Cohen
Test that the trap is triggered under the right conditions and that devlink counters increase. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add tunnel devlink-trap supportAmit Cohen
Add the trap IDs and trap group used to report tunnel drops. Register tunnel packet traps and associated tunnel trap group with devlink during driver initialization. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19devlink: Add tunnel generic packet trapsAmit Cohen
Add packet traps that can report packets that were dropped during tunnel decapsulation. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: spectrum_trap: Reorder cases according to enum orderAmit Cohen
Move L3_DROPS case to appear after L2_DROPS case. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add ECN configurations with IPinIP tunnelsAmit Cohen
Initialize ECN mapping registers during router init according to INET_ECN_encapsulate() and INET_ECN_decapsulate(). For IP-in-IP encapsulation, this is required to ensure that ECN bits in the underlay are set in accordance with the kernel. For decapsulation, this is required to ensure that packets with invalid ECN combination in underlay and overlay are trapped to the kernel and not forwarded. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: reg: Add Tunneling IPinIP Decapsulation ECN Mapping RegisterAmit Cohen
This register configures the actions that are done during IPinIP decapsulation based on the ECN bits. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: reg: Add Tunneling IPinIP Encapsulation ECN Mapping RegisterAmit Cohen
This register performs mapping from overlay ECN to underlay ECN during IPinIP encapsulation. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add NON_ROUTABLE trapAmit Cohen
Add a trap for packets that the device decided to drop because they are not supposed to be routed. For example, IGMP queries can be flooded by the device in layer 2 and reach the router. Such packets should not be routed and instead dropped. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19devlink: Add non-routable packet trapAmit Cohen
Add packet trap that can report packets that reached the router, but are non-routable. For example, IGMP queries can be flooded by the device in layer 2 and reach the router. Such packets should not be routed and instead dropped. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19selftests: devlink_trap_l3_drops: Add test cases of irif and erif disabledAmit Cohen
Add test cases to check that packets routed through disabled RIFs and packets routed from disabled RIFs are dropped and devlink counters increase when the action is trap. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add irif and erif disabled trapsAmit Cohen
IRIF_DISABLED and ERIF_DISABLED are driver specific traps. Packets are dropped for these reasons when they need to be routed through/from existing router interfaces (RIF) which are disabled. Add devlink driver-specific traps and mlxsw trap IDs used to report these traps. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge branch 'for-net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 E-Switch chains and prios This series has two parts, 1) A merge commit with mlx5-next branch that include updates for mlx5 HW layouts needed for this and upcoming submissions. 2) From Paul, Increase the number of chains and prios Currently the Mellanox driver supports offloading tc rules that are defined on the first 4 chains and the first 16 priorities. The restriction stems from the firmware flow level enforcement requiring a flow table of a certain level to point to a flow table of a higher level. This limitation may be ignored by setting the ignore_flow_level bit when creating flow table entries. Use unmanaged tables and ignore flow level to create more tables than declared by fs_core steering. Manually manage the connections between the tables themselves. HW table is instantiated for every tc <chain,prio> tuple. The miss rule of every table either jumps to the next <chain,prio> table, or continues to slow_fdb. This logic is realized by following this sequence: 1. Create an auto-grouped flow table for the specified priority with reserved entries Reserved entries are allocated at the end of the flow table. Flow groups are evaluated in sequence and therefore it is guaranteed that the flow group defined on the last FTEs will be the last to evaluate. Define a "match all" flow group on the reserved entries, providing the platform to add table miss actions. 2. Set the miss rule action to jump to the next <chain,prio> table or the slow_fdb. 3. Link the previous priority table to point to the new table by updating its miss rule. Please pull and let me know if there's any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19cxgb4: reject overlapped queues in TC-MQPRIO offloadRahul Lakkireddy
A queue can't belong to multiple traffic classes. So, reject any such configuration that results in overlapped queues for a traffic class. Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19cxgb4: fix Tx multi channel port rate limitRahul Lakkireddy
T6 can support 2 egress traffic management channels per port to double the total number of traffic classes that can be configured. In this configuration, if the class belongs to the other channel, then all the queues must be bound again explicitly to the new class, for the rate limit parameters on the other channel to take effect. So, always explicitly bind all queues to the port rate limit traffic class, regardless of the traffic management channel that it belongs to. Also, only bind queues to port rate limit traffic class, if all the queues don't already belong to an existing different traffic class. Fixes: 4ec4762d8ec6 ("cxgb4: add TC-MATCHALL classifier egress offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: phy: adin: fix a warning about msleepDejin Zheng
found a warning by the following command: ./scripts/checkpatch.pl -f drivers/net/phy/adin.c WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst #628: FILE: drivers/net/phy/adin.c:628: + msleep(10); Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: sched: act_ctinfo: fix memory leakEric Dumazet
Implement a cleanup method to properly free ci->params BUG: memory leak unreferenced object 0xffff88811746e2c0 (size 64): comm "syz-executor617", pid 7106, jiffies 4294943055 (age 14.250s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c0 34 60 84 ff ff ff ff 00 00 00 00 00 00 00 00 .4`............. backtrace: [<0000000015aa236f>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<0000000015aa236f>] slab_post_alloc_hook mm/slab.h:586 [inline] [<0000000015aa236f>] slab_alloc mm/slab.c:3320 [inline] [<0000000015aa236f>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549 [<000000002c946bd1>] kmalloc include/linux/slab.h:556 [inline] [<000000002c946bd1>] kzalloc include/linux/slab.h:670 [inline] [<000000002c946bd1>] tcf_ctinfo_init+0x21a/0x530 net/sched/act_ctinfo.c:236 [<0000000086952cca>] tcf_action_init_1+0x400/0x5b0 net/sched/act_api.c:944 [<000000005ab29bf8>] tcf_action_init+0x135/0x1c0 net/sched/act_api.c:1000 [<00000000392f56f9>] tcf_action_add+0x9a/0x200 net/sched/act_api.c:1410 [<0000000088f3c5dd>] tc_ctl_action+0x14d/0x1bb net/sched/act_api.c:1465 [<000000006b39d986>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424 [<00000000fd6ecace>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<0000000047493d02>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000bdcf8286>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000bdcf8286>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<00000000fc5b92d9>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<00000000da84d076>] sock_sendmsg_nosec net/socket.c:639 [inline] [<00000000da84d076>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<0000000042fb2eee>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<000000008f23f67e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<00000000d838e4f6>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<00000000289a9cb1>] __do_sys_sendmsg net/socket.c:2426 [inline] [<00000000289a9cb1>] __se_sys_sendmsg net/socket.c:2424 [inline] [<00000000289a9cb1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge branch 'Rate-adaptation-for-Felix-DSA-switch'David S. Miller
Vladimir Oltean says: ==================== Rate adaptation for Felix DSA switch When operating the MAC at 2.5Gbps (2500Base-X and USXGMII/QSXGMII) and in combination with certain PHYs, it is possible that the copper side may operate at lower link speeds. In this case, it is the PHY who has a MAC inside of it that emits pause frames towards the switch's MAC, telling it to slow down so that the transmission is lossless. These patches are the support needed for the switch side of things to work. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: dsa: felix: Allow PHY to AN 10/100/1000 with 2500 serdes linkAlex Marginean
If the serdes link is set to 2500 using interfce type 2500base-X, lower link speeds over on the line side should still be supported. Rate adaptation is done out of band, in our case using AQR PHYs this is done using flow control. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: dsa: felix: Handle PAUSE RX regardless of AN resultAlex Marginean
Flow control is used with 2500Base-X and AQR PHYs to do rate adaptation between line side 100/1000 links and MAC running at 2.5G. This is independent of the flow control configuration settled on line side though AN. In general, allowing the MAC to handle flow control even if not negotiated with the link partner should not be a problem, so the patch just enables it in all cases. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge tag 'iio-for-5.6b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, features and minor fixes for IIO in the 5.6 cycle Just a small set this time. As we are very near the merge window, I've rolled a few fixes in here rather than adding noise just before release. A short delay here will do little harm. New device support * adis16480 - Add support for adis16490. After earlier rework this is simple ID plus chip info. Features * kxcjk1013 - mount matrix support. * lsm_6dsx - mount matrix support. Cleanups / minor or late breaking fixes * ad7124 - add support to ad-sigma-delta and use it in this driver to allow the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices using this framework. * adis - use delay structure now available in SPI to handle transfer delays - introduce a timeouts structure to allow support of new devices * ak8975 - drop platform data support. No one is using it and it adds complexity. - use device_get_match_data rather than open coding much the same thing. * dht11 - drop meaningless todo * at91-samad2_adc - switch to dma_request_chan * altas-sensor - add a helper function to compute number of channels. Needed for new device support that is under review. * bma400 - add a lower bound check on scale. * inv_mpu6050 - add support for temperature data in the fifos for all chips. - support an odd situation where a board supports only interrupt triggering on both edges. * st_lsm6dsx - check and handle potential error return. * st_sensors - fix some values for the LSM9DS0 which is ever so slightly different from other devices using the same whoami value. - switch over to generic functions from dt ones, avoiding need for separate ACPI support. * stm32-adc - switch to dma_request_chan - suppress an error print in deferred probe case. * stm32-dac - drop private data structure element for reset controller as only used in probe. - reflect more cleanly that the reset controller is optional whilst ensuring that if is specified any errors are caught. * stm32-dfsdm - switch to dma_request_chan - fix missing application of formatting to single conversions. - ensure the sampling rate is updated when the oversampling ratio is changed. * tag 'iio-for-5.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (29 commits) iio: dac: stm32-dac: better handle reset controller failures iio: dac: stm32-dac: use reset controller only at probe time dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property iio: accel: kxcjk1013: Support orientation matrix iio: imu: st_lsm6dsx: add mount matrix support iio: adc: stm32-adc: don't print an error on probe deferral dt-bindings: iio: adis16480: add compatible entry for ADIS16490 iio: imu: adis16480: Add support for ADIS16490 iio: accel: bma400: prevent setting accel scale too low iio: imu/mpu6050: support dual-edge IRQ iio: imu: inv_mpu6050: add fifo temperature data support iio: magnetometer: ak8975: Convert to use device_get_match_data() iio: magnetometer: ak8975: Get rid of platform data iio: adc: ad7124: Set IRQ type to falling iio: adc: ad-sigma-delta: Allow custom IRQ flags iio: imu: adis: use new `delay` structure for SPI transfer delays iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio iio: adc: stm32-dfsdm: fix single conversion iio: st_sensors: Make use of device properties iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe() ...
2020-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, they are: 1) Incorrect uapi header comment in bitwise, from Jeremy Sowden. 2) Fetch flow statistics if flow is still active. 3) Restrict flow matching on hardware based on input device. 4) Add nf_flow_offload_work_alloc() helper function. 5) Remove the last client of the FLOW_OFFLOAD_DYING flag, use teardown instead. 6) Use atomic bitwise operation to operate with flow flags. 7) Add nf_flowtable_hw_offload() helper function to check for the NF_FLOWTABLE_HW_OFFLOAD flag. 8) Add NF_FLOW_HW_REFRESH to retry hardware offload from the flowtable software datapath. 9) Remove indirect calls in xt_hashlimit, from Florian Westphal. 10) Add nf_flow_offload_tuple() helper to consolidate code. 11) Add nf_flow_table_offload_cmd() helper function. 12) A few whitespace cleanups in nf_tables in bitwise and the bitmap/hash set types, from Jeremy Sowden. 13) Cleanup netlink attribute checks in bitwise, from Jeremy Sowden. 14) Replace goto by return in error path of nft_bitwise_dump(), from Jeremy Sowden. 15) Add bitwise operation netlink attribute, also from Jeremy. 16) Add nft_bitwise_init_bool(), from Jeremy Sowden. 17) Add nft_bitwise_eval_bool(), also from Jeremy. 18) Add nft_bitwise_dump_bool(), from Jeremy Sowden. 19) Disallow hardware offload for other that NFT_BITWISE_BOOL, from Jeremy Sowden. 20) Add NFTA_BITWISE_DATA netlink attribute, again from Jeremy. 21) Add support for bitwise shift operation, from Jeremy Sowden. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-20 23:58:38 +0000