summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-02Merge tag 'amd-drm-fixes-6.1-2022-12-01' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-12-01: amdgpu: - VCN fix for vangogh Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221201202015.5931-1-alexander.deucher@amd.com
2022-12-02i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag setAndrew Lunn
Recent changes to the DMA code has resulting in the IMX driver failing I2C transfers when the buffer has been vmalloc. Only perform DMA transfers if the message has the I2C_M_DMA_SAFE flag set, indicating the client is providing a buffer which is DMA safe. This is a minimal fix for stable. The I2C core provides helpers to allocate a bounce buffer. For a fuller fix the master should make use of these helpers. Fixes: 4544b9f25e70 ("dma-mapping: Add vmap checks to dma_map_single()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-12-01i2c: qcom-geni: fix error return code in geni_i2c_gpi_xferWang Yufen
Fix to return a negative error code from the gi2c->err instead of 0. Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasoluitons.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-12-01i2c: cadence: Fix regression with bus recoveryCarsten Haitzler
Commit "i2c: cadence: Add standard bus recovery support" breaks for i2c devices that have no pinctrl defined. There is no requirement for this to exist in the DT. This has worked perfectly well without this before in at least 1 real usage case on hardware (Mali Komeda DPU, Cadence i2c to talk to a tda99xx phy). Adding the requirement to have pinctrl set up in the device tree (or otherwise be found) is a regression where the whole i2c device is lost entirely (in this case dropping entire devices which then leads to the drm display stack unable to find the phy for display output, thus having no drm display device and so on down the chain). This converts the above commit to an enhancement if pinctrl can be found for the i2c device, providing a timeout on read with recovery, but if not, do what used to be done rather than a fatal loss of a device. This restores the mentioned display devices to their working state again. Fixes: 58b924241d0a ("i2c: cadence: Add standard bus recovery support") Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Michal Simek <michal.simek@amd.com> [wsa: added braces to else-branch] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-12-02Merge tag 'drm-intel-fixes-2022-12-01' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix dram info readout (Radhakrishna Sripada) - Remove non-existent pipes from bigjoiner pipe mask (Ville Syrjälä) - Fix negative value passed as remaining time (Janusz Krzysztofik) - Never return 0 if not all requests retired (Janusz Krzysztofik) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y4hp+a3TJ13t2ZA1@tursulin-desk
2022-12-01error-injection: Add prompt for function error injectionSteven Rostedt (Google)
The config to be able to inject error codes into any function annotated with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is enabled. But unfortunately, this is always enabled on x86 when KPROBES is enabled, and there's no way to turn it off. As kprobes is useful for observability of the kernel, it is useful to have it enabled in production environments. But error injection should be avoided. Add a prompt to the config to allow it to be disabled even when kprobes is enabled, and get rid of the "def_bool y". This is a kernel debug feature (it's in Kconfig.debug), and should have never been something enabled by default. Cc: stable@vger.kernel.org Fixes: 540adea3809f6 ("error-injection: Separate error-injection from kprobe") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-01drm/amdgpu: enable Vangogh VCN indirect sram modeLeo Liu
So that uses PSP to initialize HW. Fixes: 0c2c02b66c672e ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish") Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-12-01RISC-V: Fix a race condition during kernel stack overflowPalmer Dabbelt
This fixes a concrete bug but is also the basis for some cleanup work, so I'm merging it based on the offending commit in order to minimize future conflicts. * commit '7e1864332fbc1b993659eab7974da9fe8bf8c128': riscv: fix race when vmap stack overflow
2022-12-01Merge tag 'efi-fixes-for-v6.1-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fix from Ard Biesheuvel: "A single revert for some code that I added during this cycle. The code is not wrong, but it should be a bit more careful about how to handle the shadow call stack pointer, so it is better to revert it for now and bring it back later in improved form. Summary: - Revert runtime service sync exception recovery on arm64" * tag 'efi-fixes-for-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: arm64: efi: Revert "Recover from synchronous exceptions ..."
2022-12-01Merge tag 'hwmon-for-v6.1-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix refcount leak and NULL pointer access in coretemp driver - Fix UAF in ibmpex driver - Add missing pci_disable_device() to i5500_temp driver - Fix calculation in ina3221 driver - Fix temperature scaling in ltc2947 driver - Check result of devm_kcalloc call in asus-ec-sensors driver * tag 'hwmon-for-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (asus-ec-sensors) Add checks for devm_kcalloc hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new() hwmon: (coretemp) Check for null before removing sysfs attrs hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails hwmon: (i5500_temp) fix missing pci_disable_device() hwmon: (ina3221) Fix shunt sum critical calculation hwmon: (ltc2947) fix temperature scaling
2022-12-01Merge tag 'iwlwifi-next-for-kalle-2022-11-28' of ↵Kalle Valo
http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next This is the second pull request intended for v6.2 It contains two patch-sets sent before with the following content: * iwlwifi EHT adjustments * double-free fix in tx path * iwlmei PLDR flow fixes * iwlmei smatch fixes * a logging data improvement
2022-12-01Merge tag 'mt76-for-kvalo-2022-12-01' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 6.2 - fixes - WED support for mt7986 + mt7915 for flow offloading - new driver for the mt7996 wifi-7 chipset
2022-12-01hwmon: (asus-ec-sensors) Add checks for devm_kcallocYuan Can
As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference. Fixes: d0ddfd241e57 ("hwmon: (asus-ec-sensors) add driver for ASUS EC") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221125014329.121560-1-yuancan@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-01hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()Yang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak. Fixes: 14513ee696a0 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-01hwmon: (coretemp) Check for null before removing sysfs attrsPhil Auld
If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. Signed-off-by: Phil Auld <pauld@redhat.com> Cc: linux-hwmon@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com Fixes: 199e0de7f5df3 ("hwmon: (coretemp) Merge pkgtemp with coretemp") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-01wifi: mt76: mt7921e: add pci .shutdown() supportLeon Yen
Some combinations of hosts cannnot detect mt7921e after reboot. The interoperability issue is caused by the status mismatch between host and chip fw. In such cases, the driver should stop chip activities and reset chip to default state before reboot. Suggested-by: angelogioacchino.delregno@collabora.com Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Leon Yen <Leon.Yen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: mmio: fix naming conventionLorenzo Bianconi
Rename mt7915_wed_release_rx_buf in mt7915_mmio_wed_release_rx_buf, mt7915_wed_init_rx_buf in mt7915_mmio_wed_init_rx_buf and mt7915_wed_release_rx_buf in mt7915_mmio_wed_release_rx_buf Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: add support to configure spatial reuse parameter setRyder Lee
The SPR parameter set comprises OBSS PD threshold for SRG and non SRG and Bitmap of BSS color and partial BSSID. This adds support to configure fields of SPR element to firmware. User can disable firmware SR algorithms by turning sr_scene_detect off. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: enable ack signal supportRyder Lee
This reports signal strength of ACK packets from the peer as measured at each interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: enable use_cts_prot supportRyder Lee
This adds selectable RTC/CTS enablement for each interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: rely on band_idx of mt76_phyRyder Lee
The commit dc44c45c8cd0 added band_idx into mt76_phy, so switching to rely on that. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable per bandwidth power limit supportRyder Lee
This power should override the per bandwidth max power that the device emits. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: introduce mt7915_get_power_bound()Ryder Lee
Add a helper for common boundary check. This is a preliminary patch to add per bandwidth power control. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2()Xiongfeng Wang
As comment of pci_get_device() says, it returns a pci_device with its refcount increased. We need to call pci_dev_put() to decrease the refcount. Save the return value of pci_get_device() and call pci_dev_put() to decrease the refcount. Fixes: 9093cfff72e3 ("mt76: mt7915: add support for using a secondary PCIe link for gen1") Fixes: 2e30db0dde61 ("mt76: mt7915: add device id for mt7916") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: do not send firmware FW_FEATURE_NON_DL regionDeren Wu
skip invalid section to avoid potential risks Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clcDeren Wu
Add __packed annotation to avoid potential CLC parsing error Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: fix coverity overrun-call in mt76_get_txpower()Deren Wu
Make sure the nss is valid for nss_delta array. Return zero if the index is invalid. Coverity message: Event overrun-call: Overrunning callee's array of size 4 by passing argument "n_chains" (which evaluates to 15) in call to "mt76_tx_power_nss_delta". int delta = mt76_tx_power_nss_delta(n_chains); Fixes: 07cda406308b ("mt76: fix rounding issues on converting per-chain and combined txpower") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devicesShayne Chen
The driver first supports Filogic 680 PCI device, which is a Wi-Fi 7 chipset supporting concurrent tri-band operation at 6 GHz, 5 GHz, and 2.4 GHz with 4x4 antennas on each band. Currently, mt7996 only supports tri-band HE or older mode. EHT mode and more variants of Filogic 680 support will be introduced in further patches. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Co-developed-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Co-developed-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Co-developed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_powerLorenzo Bianconi
tx_rate can't be greater than 3 in mt76x0_phy_get_target_power routine for cck rates. Get rid of dead code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: fix band_idx usageRyder Lee
The commit 006b9d4ad5bf introduced phy->band_idx to accommodate the band definition change for mt7986 so that the band_idx of main_phy can be 0 or 1. Accordingly, the source of band_idx 1 has switched to "phy != &dev->phy" or "dev->phy.band_idx = 1". We still use ext_phy to represent band 1 somewhere in driver, so fix it. Also, band_idx sounds more reasonable than dbdc_idx, so change it. Fixes: 006b9d4ad5bf ("mt76: mt7915: introduce band_idx in mt7915_phy") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable .sta_set_txpwr supportRyder Lee
This adds support for adjusting the Txpower level while pushing traffic to an associated station. The allowed range is from 0 to the maximum power of channel. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: add basedband Txpower info into debugfsRyder Lee
This helps user to debug Txpower propagation path easily. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: add support to configure spatial reuse parameter setRyder Lee
The SPR parameter set comprises OBSS PD threshold for SRG and non SRG and Bitmap of BSS color and partial BSSID. This adds support to configure fields of SPR element to firmware. User can disable firmware SR algorithms by turning sr_scene_detect off. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: add missing MODULE_PARM_DESCRyder Lee
Add documentation for module_param so that they're visible with modinfo command. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable WED RX statsSujuan Chen
Introduce the capability to report WED RX stats to mac80211. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable WED RX supportLorenzo Bianconi
Enable RX Wireless Ethernet Dispatch available on MT7986 Soc in oreder to offlad traffic received by WLAN NIC and forwarded to LAN/WAN one. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routineSujuan Chen
This is a preliminary patch to introduce WED RX support for mt7915. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: add info parameter to rx_skb signatureSujuan Chen
This is a preliminary patch to introduce WED RX support for mt7915. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: add WED RX support to dma queue allocLorenzo Bianconi
Introduce the capability to allocate WED RX buffers in mt76_dma_wed_setup routine. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: add WED RX support to mt76_dma_rx_fillLorenzo Bianconi
Introduce the capability to refill WED RX buffers in mt76_dma_rx_fill utility routine. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: add WED RX support to mt76_dma_{add,get}_bufLorenzo Bianconi
Introduce the capability to configure RX WED in mt76_dma_{add,get}_buf utility routines. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: introduce rxwi and rx token utility routinesSujuan Chen
This is a preliminary patch to introduce WED RX support for mt7915. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: fix wrong power after multiple SAR setYN Chen
We should update CLC config before SAR set to synchronize all related settings. Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: introduce helper for mt7996 chipsetShayne Chen
Introduce is_mt7996() helper for new chipset. This is a preliminary patch to support mt7996 driver. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: add more starec command tagsShayne Chen
Add starec tags which will be used in new chipset. This is a preliminary patch to add mt7996 chipset support. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: add more bss info command tagsShayne Chen
Add bss info tags which will be used in new chipset. This is a preliminary patch to add mt7996 chipset support. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: introduce unified event tableShayne Chen
Add event IDs and related bit fields for unified event support. This is a preliminary patch to add mt7996 chipset support. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: add more unified command IDsShayne Chen
Add more unified command IDs which will be used in new chipset. This is the preliminary patch for mt7996 support. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: rework fields for larger bandwidth support in sta_rec_bfShayne Chen
Rename nrow_bw160 and ncol_bw160 since channel width 320 MHz will share the same field. This is a preliminary patch to add mt7996 chipset support. Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: update struct sta_rec_phyShayne Chen
For connac3 generation, max_ampdu_len should be filled in struct sta_rec_phy. This is a preliminary patch to add mt7996 chipset support. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-23 00:00:13 +0000