summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-10OMAP: DSS2: Clean up DISPC color mode validation checksArchit Taneja
The supported set of color modes varies for different DISPC pipelines(plane) and omap version. This makes the checks for validation of a color mode more complicated as new omap versions are added. A dss_feature function is created which tells if a color_mode is supported for a plane on the current omap revision. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add back authors of panel-generic.c based driversBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: remove generic DPI panel driver duplicated panel driversBryan Wu
Still keep sharp_ls_panel driver, because it contains blacklight control driver. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: use generic DPI panel driver in board filesBryan Wu
Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight control driver code which will be moved out later. Then we can use generic DPI driver for sharp_ls_panel. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add generic DPI panel display driverBryan Wu
Generic DPI panel driver includes the driver and 4 similar panel configurations. It will match the panel name which is passed from platform data and setup the right configurations. With generic DPI panel driver, we can remove those 4 duplicated panel display drivers. In the future, it is simple for us just add new panel configuration date in panel-generic-dpi.c to support new display panel. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: OMAPFB: Add null pointer checkSamreen
A null pointer check added. And using kstrdup() instead of kmalloc() & strcpy() Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3: Enable display on ZOOM2/3/3630SDPKishore Y
Enable Display on zoom2, zoom3 and 3630sdp boards. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3Kishore Y
Board-zoom-display.c added as a common file for display functionality on boards zoom2, zoom3 and 3630sdp. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add NEC NL8048HL11-01B display panelErik Gilling
NEC WVGA LCD NL8048HL11-01B panel support has been added. This panel is being used in zoom2/zoom3/3630 sdp boards. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> CC: Subbu Venkatesh <subramani.venkatesh@windriver.com> CC: Erik Gilling <konkers@android.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3630: DSS2: Enable Pre-Multiplied Alpha SupportRajkumar N
Enable dss to process color formats with pre-mulitplied alpha. With this we can have alpha values defined for each pixel and hence can have different blending values for each pixel. sysfs entry has been created for this and pre-multiplied alpha support is turned off by default. Signed-off-by: Sudeep Basavaraj <sudeep.basavaraj@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3: DSS2: Split OMAP3 has feature for 3430 & 3630Samreen
Splitting the OMAP3 dss has feature separately for omap3430 & omap3630 Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Fix: Read correct bit in dispc_enable_alpha_blending()Archit Taneja
Read correct DISPC_CONFIG bit when the channel is DIGIT, remove extra line at the end of the function. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10x86, lapic-timer: Increase the max_delta to 31 bitsPierre Tardy
Latest atom socs(penwell) does not have hpet timer. As their local APIC timer is clocked at 400KHZ, and the current code limit their Initial Counter register to 23 bits, they cannot sleep more than 1.34 seconds which leads to ~2 spurious wakeup per second (1 per thread) These SOCs support 32bit timer so we change the max_delta to at least 31bits. So we can at least sleep for 300 seconds. We could not find any previous chip errata where lapic would only have 23 bit precision As powertop is suggesting to activate HPET to "sleep longer", this could mean this problem is already known. Problem is here since very first implementation of lapic timer as a clock event e9e2cdb [PATCH] clockevents: i386 drivers. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Adrian Bunk <bunk@stusta.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andi Kleen <ak@suse.de> LKML-Reference: <1294327409-19426-1-git-send-email-pierre.tardy@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-10Merge branch 'x86/numa' into x86/urgentIngo Molnar
Merge reason: Topic is ready for upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-10Merge branch 'x86/apic-cleanups' into x86/urgentIngo Molnar
Merge reason: Topic is ready for upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-10microblaze: remove obsolete DEBUG_BOOTMEMAmerigo Wang
"git grep" shows this is the last piece of code using DEBUG_BOOTMEM, so remove it. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-01-10Merge commit 'v2.6.37' into nextMichal Simek
2011-01-10block: ensure that completion error gets properly tracedJens Axboe
We normally just use the BIO_UPTODATE flag to signal 0/-EIO. If we have more information available, we should pass that along to the trace output. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-09ixgbe: update ntuple filter configurationAlexander Duyck
This change fixes several issues found in ntuple filtering while I was doing the ATR refactor. Specifically I updated the masks to work correctly with the latest version of ethtool, I cleaned up the exception handling and added detailed error output when a filter is rejected, and corrected several bits that were set incorrectly in ixgbe_type.h. The previous version of this patch included a printk that was left over from me fixing the filter setup. This patch does not include that printk. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: further flow director performance optimizationsAlexander Duyck
This change adds a compressed input type for atr signature hash computation. It also drops the use of the set functions when setting up the ATR input since we can then directly setup the hash input as two dwords that can be stored and passed as registers. With these changes the cost of computing the has is low enough that we can perform a hash computation on each TCP SYN flagged packet allowing us to drop the number of flow director misses considerably in tests such as netperf TCP_CRR. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: cleanup flow director hash computation to improve performanceAlexander Duyck
This change cleans up the layout of the flow director data, and the algorithm used to calculate the hash resulting in a 35x / 3500% performance increase versus the old flow director hash computation. The overall effect is only a 1% increase in transactions per second though due to the fact that only 1 packet in 20 are actually hashed upon. TCP_RR before: Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 60.00 23059.27 16384 87380 TCP_RR after: Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 60.00 23239.98 16384 87380 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: make sure per Rx queue is disabled before unmapping the receive bufferYi Zou
When disable the Rx logic globally, we would also want to disable the per Rx queue receive logic by per queue Rx control register RXDCTL so no more DMA is happening from the packet buffer to the receive buffer associated with the Rx ring, before we start unmapping Rx ring receive buffer. The hardware may take max of 100us before the corresponding Rx queue is really disabled. Added ixgbe_disable_rx_queue() for this purpose. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000: Add support for the CE4100 reference platformDirk Brandewie
This patch adds support for the gigabit phys present on the CE4100 reference platforms. Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: add custom set_d[0|3]_lplu_state function pointer for 82574Bruce Allan
82574 needs to configure Low Power Link Up (or LPLU) differently than the other parts in the 8257x family supported by the driver. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: power off PHY after reset when interface is downBruce Allan
Some Phys supported by the driver do not remain powered off across a reset of the device when the interface is down, e.g. on 82571, but not on 82574. This patch powers down (only when WoL is disabled) the PHY after a reset if the interface is down and the ethtool diagnostics are not currently running. The ethtool diagnostic function required a minor re-factor as a result, and the e1000_[get|put]_hw_control() functions are renamed since they are no longer static to netdev.c as they are needed by the ethtool diagnostics. A couple minor whitespace issues were cleaned up, too. Reported-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: use either_crc_le() rather than re-write itBruce Allan
For the 82579 jumbo frame workaround, there is no need to re-write the CRC calculation functionality already found in the kernel's ether_crc_le(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: properly bounds-check string functionsBruce Allan
Use string functions with bounds checking rather than their non-bounds checking counterparts, and do not hard code these boundaries. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: convert calls of ops.[read|write]_reg to e1e_[r|w]phyBruce Allan
Cleans up the code a bit by using the driver-specific e1e_rphy and e1e_wphy macros instead of the full function pointer variants. Fix a couple whitespace issue with two already existing calls to e1e_wphy. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: cleanup variables set but not usedBruce Allan
The ICR register is clear on read and we don't care what the returned value is when resetting the hardware so the icr variable(s) can be removed. We should not ignore the return from e1000_lv_jumbo_workaround_ich8lan() and from e1000_get_phy_id_82571() (dump a debug message when it fails and when an unknown Phy id is returned). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Convert checksums to use centrally computed features.Jesse Gross
In order to compute the features for other offloads (primarily scatter/gather), we need to first check the ability of the NIC to offload the checksum for the packet. Since we have already computed this, we can directly use the result instead of figuring it out again. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Convert skb_need_linearize() to use precomputed features.Jesse Gross
This switches skb_need_linearize() to use the features that have been centrally computed. In doing so, this fixes a problem where scatter/gather should not be used because the card does not support checksum offloading on that type of packet. On device registration we only check that some form of checksum offloading is available if scatter/gatther is enabled but we must also check at transmission time. Examples of this include IPv6 or vlan packets on a NIC that only supports IPv4 offloading. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Convert dev_gso_segment() to use precomputed features.Jesse Gross
This switches dev_gso_segment() to use the device features computed by the centralized routine. In doing so, it fixes a problem where it would always use dev->features, instead of those appropriate to the number of vlan tags if any are present. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Pass features into netif_needs_gso().Jesse Gross
Now that there is a single function that can compute the device features relevant to a packet, we don't want to run it for each offload. This converts netif_needs_gso() to take the features of the device, rather than computing them itself. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Generalize netif_get_vlan_features().Jesse Gross
netif_get_vlan_features() is currently only used by netif_needs_gso(), so it only concerns itself with GSO features. However, several other places also should take into account the contents of the packet when deciding whether to offload to hardware. This generalizes the function to return features about all of the various forms of offloading. Since offloads tend to be linked together, this avoids duplicating the logic in each location (i.e. the scatter/gather code also needs the checksum logic). Suggested-by: Michał Mirosław <mirqus@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Accept NETIF_F_HW_CSUM for all protocols.Jesse Gross
We currently only have software fallback for one type of checksum: the TCP/UDP one's complement. This means that a protocol that uses hardware offloading for a different type of checksum (FCoE, SCTP) must directly check the device's features and do the right thing ahead of time. By the time we get to dev_can_checksum(), we're only deciding whether to apply the one algorithm in software or hardware. NETIF_F_HW_CSUM has the same capabilities as the software version, so we should always use it if present. The primary advantage of this is multiply tagged vlans can use hardware checksumming. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10nilfs2: unfold nilfs_dat_inode functionRyusuke Konishi
nilfs_dat_inode function was a wrapper to switch between normal dat inode and gcdat, a clone of the dat inode for garbage collection. This function got obsolete when the gcdat inode was removed, and now we can access the dat inode directly from a nilfs object. So, we will unfold the wrapper and remove it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: do not pass sbi to functions which can get it from inodeRyusuke Konishi
This removes argument for passing nilfs_sb_info structure from nilfs_set_file_dirty and nilfs_load_inode_block functions. We can get a pointer to the structure from inodes. [Stephen Rothwell <sfr@canb.auug.org.au>: fix conflict with commit b74c79e99389cd79b31fcc08f82c24e492e63c7e] Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: get rid of nilfs_mount_options structureRyusuke Konishi
Only mount_opt member is used in the nilfs_mount_options structure, and we can simplify it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: simplify nilfs_mdt_freeze_bufferRyusuke Konishi
nilfs_page_get_nth_block() function used in nilfs_mdt_freeze_buffer() always returns a valid buffer head, so its validity check can be removed. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: get rid of loaded flag from nilfs objectRyusuke Konishi
NILFS_LOADED flag of the nilfs object is not used now, so this will remove it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: fix a checkpatch error in page.cRyusuke Konishi
Will correct the following checkpatch error: ERROR: trailing whitespace #494: FILE: page.c:494: + $ Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: fiemap supportRyusuke Konishi
This adds fiemap to nilfs. Two new functions, nilfs_fiemap and nilfs_find_uncommitted_extent are added. nilfs_fiemap() implements the fiemap inode operation, and nilfs_find_uncommitted_extent() helps to get a range of data blocks whose physical location has not been determined. nilfs_fiemap() collects extent information by looping through nilfs_bmap_lookup_contig and nilfs_find_uncommitted_extent routines. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: mark buffer heads as delayed until the data is written to diskRyusuke Konishi
Nilfs does not allocate new blocks on disk until they are actually written to. To implement fiemap, we need to deal with such blocks. To allow successive fiemap patch to distinguish mapped but unallocated regions, this marks buffer heads of those new blocks as delayed and clears the flag after the blocks are written to disk. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: call nilfs_error inside bmap routinesRyusuke Konishi
Some functions using nilfs bmap routines can wrongly return invalid argument error (i.e. -EINVAL) that bmap returns as an internal code for btree corruption. This fixes the issue by catching and converting the internal EINVAL to EIO and calling nilfs_error function inside bmap routines. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10fs/nilfs2/super.c: Use printf extension %pVJoe Perches
Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10MAINTAINERS: add nilfs2 git tree entryRyusuke Konishi
NILFS2 filesystem section of the MAINTAINERS file lacks an entry of scm tree. This adds it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10drm/radeon/kms: disable underscan by defaultAlex Deucher
Lots of HDMI TVs overscan the incoming image by default. The underscan option was added as a way to compensate for that by underscanning the image so that the edges would not be cut off on an overscanning TV. However, the TV provides no way of knowing whether it is overscanning or not. If the user has disabled overscan on their TV or has a TV that does not overscan, you will get black bars around the edges of your screen. Prior to the patch we got complaints and bug reports from users with overscanning TVs, now with the patch, we get lots of complaints and bug reports from users with non-overscanning TVs. There's no good default, but on average there have been more users complaining about it being on by default than off, so change it to off. This will probably result in a new deluge of overscanning TV user complaints. There's no winning. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-10drm/radeon/kms: only enable hdmi features if the monitor supports audioAlex Deucher
This avoids some issues in the current hdmi audio code for monitors without audio. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-09r8169: delay phy init until device opens.françois romieu
It workarounds the 60s firmware load failure timeout for the non-modular case. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net: fix kernel-doc warning in core/filter.cRandy Dunlap
Fix new kernel-doc notation warning in net/core/filter.c: Warning(net/core/filter.c:172): No description found for parameter 'fentry' Warning(net/core/filter.c:172): Excess function parameter 'filter' description in 'sk_run_filter' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-16 17:46:23 +0000