| Age | Commit message (Collapse) | Author |
|---|
|
Every vcpu has separate LBT registers. And there are four scr registers,
one flags and ftop register for LBT extension. When VM migrates, VMM
needs to get LBT registers for every vcpu.
Here macro KVM_REG_LOONGARCH_LBT is added for new vcpu lbt register type,
the following macro is added to get/put LBT registers.
KVM_REG_LOONGARCH_LBT_SCR0
KVM_REG_LOONGARCH_LBT_SCR1
KVM_REG_LOONGARCH_LBT_SCR2
KVM_REG_LOONGARCH_LBT_SCR3
KVM_REG_LOONGARCH_LBT_EFLAGS
KVM_REG_LOONGARCH_LBT_FTOP
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Loongson Binary Translation (LBT) is used to accelerate binary translation,
which contains 4 scratch registers (scr0 to scr3), x86/ARM eflags (eflags)
and x87 fpu stack pointer (ftop).
Like FPU extension, here a lazy enabling method is used for LBT. the LBT
context is saved/restored on the vcpu context switch path.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Loongson SIMD Extension (LSX), Loongson Advanced SIMD Extension (LASX)
and Loongson Binary Translation (LBT) features are defined in register
CPUCFG2. Two kinds of LSX/LASX/LBT feature detection are added here, one
is VCPU feature, and the other is VM feature. VCPU feature dection can
only work with VCPU thread itself, and requires VCPU thread is created
already. So LSX/LASX/LBT feature detection for VM is added also, it can
be done even if VM is not created, and also can be done by any threads
besides VCPU threads.
Here ioctl command KVM_HAS_DEVICE_ATTR is added for VM, and macro
KVM_LOONGARCH_VM_FEAT_CTRL is added to check supported feature. And
five sub-features relative with LSX/LASX/LBT are added as following:
KVM_LOONGARCH_VM_FEAT_LSX
KVM_LOONGARCH_VM_FEAT_LASX
KVM_LOONGARCH_VM_FEAT_X86BT
KVM_LOONGARCH_VM_FEAT_ARMBT
KVM_LOONGARCH_VM_FEAT_MIPSBT
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Similar with x86, when VM is detected, revert to a simple test-and-set
lock to avoid the horrors of queue preemption.
Tested on 3C5000 Dual-way machine with 32 cores and 2 numa nodes,
test case is kcbench on kernel mainline 6.10, the detailed command is
"kcbench --src /root/src/linux"
Performance on host machine
kernel compile time performance impact
Original 150.29 seconds
With patch 150.19 seconds almost no impact
Performance on virtual machine:
1. 1 VM with 32 vCPUs and 2 numa node, numa node pinned
kernel compile time performance impact
Original 170.87 seconds
With patch 171.73 seconds almost no impact
2. 2 VMs, each VM with 32 vCPUs and 2 numa node, numa node pinned
kernel compile time performance impact
Original 2362.04 seconds
With patch 354.73 seconds +565%
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In order to effectively test all mode switch combinations export
everything necessarily for amd-pstate-ut to trigger a mode switch.
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
`amd_pstate_prefcore_ranking` reflects the dynamic rankings of a CPU
core based on platform conditions. Explicitly include it in the
documentation.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Explain that the sysfs file represents both preferred core being
enabled by the user and supported by the hardware.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Don't take and release the mutex when prefcore isn't present and
avoid initialization of variables that will be initially set
in the function.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
amd_get_boost_ratio_numerator()
The special case in amd_pstate_highest_perf_set() is the value used
for calculating the boost numerator. Merge this into
amd_get_boost_ratio_numerator() and then use that to calculate boost
ratio.
This allows dropping more special casing of the highest perf value.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
AMD systems that support preferred cores will use "166" as their
numerator for max frequency calculations instead of "255".
Add a function for detecting preferred cores by looking at the
highest perf value on all cores.
If preferred cores are enabled return 166 and if disabled the
value in the highest perf register. As the function will be called
multiple times, cache the values for the boost numerator and if
preferred cores will be enabled in global variables.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
amd_pstate_get_highest_perf() is a helper used to get the highest perf
value on AMD systems. It's used in amd-pstate as part of preferred
core handling, but applicable for acpi-cpufreq as well.
Move it out to cppc handling code as amd_get_highest_perf().
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
If the boost ratio isn't calculated properly for the system for any
reason this can cause other problems that are non-obvious.
Raise all messages to warn instead.
Suggested-by: Perry Yuan <Perry.Yuan@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
perf_ratio is a u64 and SCHED_CAPACITY_SCALE is a large number.
Shifting by one will never have a zero value.
Drop the check.
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.sheoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CPPC 'Highest Perf'
register.
Rename the function to clarify its use and allow the function to return
errors. Adjust the consumer in acpi-cpufreq to catch errors.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Checkpath emits the following warning:
```
WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
```
Adjust the code accordingly.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
To prepare to let amd_get_highest_perf() detect preferred cores
it will require CPPC functions. Move amd_get_highest_perf() to
cppc.c to prepare for 'preferred core detection' rework.
No functional changes intended.
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()',
so move 'pad' pointer initialization after this function when memory is
already reallocated.
Kasan bug report:
==================================================================
BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc
Read of size 8 at addr ffff000000e8b260 by task modprobe/356
CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x90
print_report+0xfc/0x5c0
kasan_report+0xb8/0xfc
__asan_load8+0x9c/0xb8
axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card]
meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils]
platform_probe+0x8c/0xf4
really_probe+0x110/0x39c
__driver_probe_device+0xb8/0x18c
driver_probe_device+0x108/0x1d8
__driver_attach+0xd0/0x25c
bus_for_each_dev+0xe0/0x154
driver_attach+0x34/0x44
bus_add_driver+0x134/0x294
driver_register+0xa8/0x1e8
__platform_driver_register+0x44/0x54
axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card]
do_one_initcall+0xdc/0x25c
do_init_module+0x10c/0x334
load_module+0x24c4/0x26cc
init_module_from_file+0xd4/0x128
__arm64_sys_finit_module+0x1f4/0x41c
invoke_syscall+0x60/0x188
el0_svc_common.constprop.0+0x78/0x13c
do_el0_svc+0x30/0x40
el0_svc+0x38/0x78
el0t_64_sync_handler+0x100/0x12c
el0t_64_sync+0x190/0x194
Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Cc: Stable@vger.kernel.org
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240911142425.598631-1-avkrasnov@salutedevices.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0c8c5bdd7eaf291b6f727e98506fb68acee3a4cc)
|
|
cpumap takes RX processing out of softirq and onto a separate kthread.
Since the kthread needs to be scheduled in order to run (versus softirq
which does not), we can theoretically experience extra latency if the
system is under load and the scheduler is being unfair to us.
Moving the tracepoint to before passing the skb list up the stack allows
users to more accurately measure enqueue/dequeue latency introduced by
cpumap via xdp:xdp_cpumap_enqueue and xdp:xdp_cpumap_kthread tracepoints.
f9419f7bd7a5 ("bpf: cpumap add tracepoints") which added the tracepoints
states that the intent behind them was for general observability and for
a feedback loop to see if the queues are being overwhelmed. This change
does not mess with either of those use cases but rather adds a third
one.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/bpf/47615d5b5e302e4bd30220473779e98b492d47cd.1725585718.git.dxu@dxuuu.xyz
|
|
Currently, xskxceiver assumes that MAX_SKB_FRAGS value is always 17
which is not true - since the introduction of BIG TCP this can now take
any value between 17 to 45 via CONFIG_MAX_SKB_FRAGS.
Adjust the TOO_MANY_FRAGS test case to read the currently configured
MAX_SKB_FRAGS value by reading it from /proc/sys/net/core/max_skb_frags.
If running system does not provide that sysctl file then let us try
running the test with a default value.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240910124129.289874-1-maciej.fijalkowski@intel.com
|
|
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When creating a new io worker, this worker should inherit the cpuset
of the cgroup.
Fixes: da64d6db3bd3 ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-3-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When changing the affinity of the io_wq thread via syscall, we must only
allow cpumasks within the limits defined by the cpuset controller of the
cgroup (if enabled).
Fixes: da64d6db3bd3 ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-2-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use newly added mm function unpin_user_folio() to put refs by npages
count.
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240911064935.5630-5-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new function unpin_user_folio() to put the refs of a folio by
npages count.
The check for BIO_PAGE_PINNED flag is removed as it is already checked
in bio_release_pages().
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240911064935.5630-4-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a bigger size from folio to bio and skip merge processing for pages.
Fetch the offset of page within a folio. Depending on the size of folio
and folio_offset, fetch a larger length. This length may consist of
multiple contiguous pages if folio is multiorder.
Using the length calculate number of pages which will be added to bio and
increment the loop counter to skip those pages.
This technique helps to avoid overhead of merging pages which belong to
same large order folio.
Also folio-ize the functions bio_iov_add_page() and
bio_iov_add_zone_append_page()
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240911064935.5630-3-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Added new bio_add_hw_folio() function as a wrapper around
bio_add_hw_page(). This is a prep patch.
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240911064935.5630-2-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Clang static checker (scan-build) warning:
sound/soc/codecs/peb2466.c:232:8:
Assigned value is garbage or undefined [core.uninitialized.Assign]
232 | *val = tmp;
| ^ ~~~
When peb2466_read_byte() fails, 'tmp' will have a garbage value.
Add a judgemnet to avoid this problem.
Fixes: 227f609c7c0e ("ASoC: codecs: Add support for the Infineon PEB2466 codec")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://patch.msgid.link/20240911115448.277828-1-suhui@nfschina.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Raju Lakkaraju says:
====================
Add support to PHYLINK for LAN743x/PCI11x1x chips
This is the follow-up patch series of
https://lkml.iu.edu/hypermail/linux/kernel/2310.2/02078.html
Divide the PHYLINK adaptation and SFP modifications into two separate patch
series.
The current patch series focuses on transitioning the LAN743x driver's PHY
support from phylib to phylink.
Tested on PCI11010 Rev-1 Evaluation board
Change List:
============
V5 -> V6:
- Remove the lan743x_find_max_speed( ) function. Not require
- Add EEE enable check before calling lan743x_mac_eee_enable( ) function
V4 -> V5:
- Remove the fixed_phy_unregister( ) function. Not require
- Remove the "phydev->eee_enabled" check to update the MAC EEE
enable/disable
- Call lan743x_mac_eee_enable() with true after update tx_lpi_timer.
- Add phy_support_eee() to initialize the EEE flags
V3 -> V4:
- Add fixed-link patch along with this series.
Note: Note: This code was developed by Mr.Russell King
Ref:
https://lore.kernel.org/netdev/LV8PR11MB8700C786F5F1C274C73036CC9F8E2@LV8PR11MB8700.namprd11.prod.outlook.com/T/#me943adf54f1ea082edf294aba448fa003a116815
- Change phylink fixed-link function header's string from "Returns" to
"Returns:"
- Remove the EEE private variable from LAN743x adapter strcture and fix the
EEE's set/get functions
- set the individual caps (i.e. _RGMII, _RGMII_ID, _RGMII_RXID and
__RGMII_TXID) replace with phy_interface_set_rgmii( ) function
- Change lan743x_set_eee( ) to lan743x_mac_eee_enable( )
V2 -> V3:
- Remove the unwanted parens in each of these if() sub-blocks
- Replace "to_net_dev(config->dev)" with "netdev".
- Add GMII_ID/RGMII_TXID/RGMII_RXID in supported_interfaces
- Fix the lan743x_phy_handle_exists( ) return type
V1 -> V2:
- Fix the Russell King's comments i.e. remove the speed, duplex update in
lan743x_phylink_mac_config( )
- pre-March 2020 legacy support has been removed
V0 -> V1:
- Integrate with Synopsys DesignWare XPCS drivers
- Based on external review comments,
- Changes made to SGMII interface support only 1G/100M/10M bps speed
- Changes made to 2500Base-X interface support only 2.5Gbps speed
- Add check for not is_sgmii_en with is_sfp_support_en support
- Change the "pci11x1x_strap_get_status" function return type from void to
int
- Add ethtool phylink wol, eee, pause get/set functions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to ethtool phylink functions:
- get/set settings like speed, duplex etc
- get/set the wake-on-lan (WOL)
- get/set the energy-efficient ethernet (EEE)
- get/set the pause
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Migrate phy support from phylib to phylink.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create separate Link Speed Duplex (LSD) update state function from
lan743x_sgmii_config () to use as subroutine.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create separate PCS power reset function from lan743x_sgmii_config () to use
as subroutine.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phylink
The function allows for the configuration of a fixed link state for a given
phylink instance. This addition is particularly useful for network devices that
operate with a fixed link configuration, where the link parameters do not change
dynamically. By using `phylink_set_fixed_link()`, drivers can easily set up
the fixed link state during initialization or configuration changes.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
decoding of error code register"
Marc Kleine-Budde <mkl@pengutronix.de> says:
This series updates the delay calculation for the timekeeping delayed
work and fixes the decoding of the error code register.
Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-0-5ce385b5ab10@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
error code register
Probably due to a copy/paste error rkcanfd_handle_error_int_reg_ec()
checks twice if the RKCANFD_REG_ERROR_CODE_TX_ACK_EOF bit is set in
reg_ec.
Keep the correct check for RKCANFD_REG_ERROR_CODE_TX_ACK_EOF and
remove the superfluous one.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://patch.msgid.link/9a46d10d-e4e3-40a5-8fb6-f4637959f124@stanley.mountain
Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller")
Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-2-5ce385b5ab10@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Rework the delay calculation to only require a single 64-bit division.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[mkl: port to on-top of existing 32-bit division fix]
Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-1-5ce385b5ab10@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc fixes for v6.11-final
StarFive:
A fix to return one of the clocks on the JH7110 from 1 GHz to 1.5 GHz
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.11-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
Link: https://lore.kernel.org/r/20240909-hybrid-groovy-601a33b5b309@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is still a build failure when the rwrng support is in a loadable
module but the mcu driver is built-in:
arm-linux-gnueabi-ld: drivers/platform/cznic/turris-omnia-mcu-trng.o: in function `omnia_mcu_register_trng':
turris-omnia-mcu-trng.c:(.text.omnia_mcu_register_trng+0x11c): undefined reference to `devm_hwrng_register'
Change the dependency to explicitly disallow the broken
configuration.
Fixes: 41bb142a4028 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240909110417.247453-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
On the Microchip SAMA7G54 MPU the IR_TSW (timestamp wraparound) fires
at about 1 Hz, but the driver doesn't care about it. Add it to the
list of interrupts to disable in m_can_chip_config to reduce unneeded
wakeups.
Link: https://patch.msgid.link/DM8PR14MB5221D9DD3A7F2130EF161AF7EF9E2@DM8PR14MB5221.namprd14.prod.outlook.com
Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com>
Link: https://patch.msgid.link/20240911-can-m_can-mask-timestamp-wraparound-irq-v1-1-0155b70dc827@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The CAN-USB/3-FD was missing on the list of supported devices.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20240910170236.2287637-1-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all can drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909072742.381003-2-u.kleine-koenig@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
for non-continous port maps"
This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it
breaks codecs using non-continuous masks in source and sink ports. The
commit missed the point that port numbers are not used as indices for
iterating over prop.sink_ports or prop.source_ports.
Soundwire core and existing codecs expect that the array passed as
prop.sink_ports and prop.source_ports is continuous. The port mask still
might be non-continuous, but that's unrelated.
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Closes: https://lore.kernel.org/all/b6c75eee-761d-44c8-8413-2a5b34ee2f98@linux.intel.com/
Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps")
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240909164746.136629-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
|
|
The icache will be flushed in switch_to() if force_icache_flush is true,
or in flush_icache_deferred() if icache_stale_mask is set. Between
setting force_icache_flush to false and calculating the new
icache_stale_mask, preemption needs to be disabled. There are two
reasons for this:
1. If CPU migration happens between force_icache_flush = false, and the
icache_stale_mask is set, an icache flush will not be emitted.
2. smp_processor_id() is used in set_icache_stale_mask() to mark the
current CPU as not needing another flush since a flush will have
happened either by userspace or by the kernel when performing the
migration. smp_processor_id() is currently called twice with preemption
enabled which causes a race condition. It allows
icache_stale_mask to be populated with inconsistent CPU ids.
Resolve these two issues by setting the icache_stale_mask before setting
force_icache_flush to false, and using get_cpu()/put_cpu() to obtain the
smp_processor_id().
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: 6b9391b581fd ("riscv: Include riscv_set_icache_flush_ctx prctl")
Link: https://lore.kernel.org/r/20240903-fix_fencei_optimization-v2-1-8025f20171fc@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
As reported in [1], the use of smp_processor_id() in
pmu_sbi_device_probe() must be protected by disabling the preemption, so
simple use get_cpu()/put_cpu() instead.
Reported-by: Nam Cao <namcao@linutronix.de>
Closes: https://lore.kernel.org/linux-riscv/20240820074925.ReMKUPP3@linutronix.de/ [1]
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Nam Cao <namcao@linutronix.de>
Fixes: a8625217a054 ("drivers/perf: riscv: Implement SBI PMU snapshot function")
Reported-by: Andrea Parri <parri.andrea@gmail.com>
Tested-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240826165210.124696-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-09-09 (ice, igb)
This series contains updates to ice and igb drivers.
Martyna moves LLDP rule removal to the proper uninitialization function
for ice.
Jake corrects accounting logic for FWD_TO_VSI_LIST switch filters on
ice.
Przemek removes incorrect, explicit calls to pci_disable_device() for
ice.
Michal Schmidt stops incorrect use of VSI list for VLAN use on ice.
Sriram Yagnaraman adjusts igb_xdp_ring_update_tail() to be called under
Tx lock on igb.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Always call igb_xdp_ring_update_tail() under Tx lock
ice: fix VSI lists confusion when adding VLANs
ice: stop calling pci_disable_device() as we use pcim
ice: fix accounting for filters shared by multiple VSIs
ice: Fix lldp packets dropping after changing the number of channels
====================
Link: https://patch.msgid.link/20240909203842.3109822-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2024-09-09
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2024-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix bridge mode operations when there are no VFs
net/mlx5: Verify support for scheduling element and TSAR type
net/mlx5: Add missing masks and QoS bit masks for scheduling elements
net/mlx5: Explicitly set scheduling element and TSAR type
net/mlx5e: Add missing link mode to ptys2ext_ethtool_map
net/mlx5e: Add missing link modes to ptys2ethtool_map
net/mlx5: Update the list of the PCI supported devices
====================
Link: https://patch.msgid.link/20240909194505.69715-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: support devlink subfunction
Michal Swiatkowski says:
Currently ice driver does not allow creating more than one networking
device per physical function. The only way to have more hardware backed
netdev is to use SR-IOV.
Following patchset adds support for devlink port API. For each new
pcisf type port, driver allocates new VSI, configures all resources
needed, including dynamically MSIX vectors, program rules and registers
new netdev.
This series supports only one Tx/Rx queue pair per subfunction.
Example commands:
devlink port add pci/0000:31:00.1 flavour pcisf pfnum 1 sfnum 1000
devlink port function set pci/0000:31:00.1/1 hw_addr 00:00:00:00:03:14
devlink port function set pci/0000:31:00.1/1 state active
devlink port function del pci/0000:31:00.1/1
Make the port representor and eswitch code generic to support
subfunction representor type.
VSI configuration is slightly different between VF and SF. It needs to
be reflected in the code.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: subfunction activation and base devlink ops
ice: basic support for VLAN in subfunctions
ice: support subfunction devlink Tx topology
ice: implement netdevice ops for SF representor
ice: check if SF is ready in ethtool ops
ice: don't set target VSI for subfunction
ice: create port representor for SF
ice: make representor code generic
ice: implement netdev for subfunction
ice: base subfunction aux driver
ice: allocate devlink for subfunction
ice: treat subfunction VSI the same as PF VSI
ice: add basic devlink subfunctions support
ice: export ice ndo_ops functions
ice: add new VSI type for subfunctions
====================
Link: https://patch.msgid.link/20240906223010.2194591-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2024-08-29
HW-Managed Flow Steering in mlx5 driver
Yevgeny Kliteynik says:
=======================
1. Overview
-----------
ConnectX devices support packet matching, modification, and redirection.
This functionality is referred as Flow Steering.
To configure a steering rule, the rule is written to the device-owned
memory. This memory is accessed and cached by the device when processing
a packet.
The first implementation of Flow Steering was done in FW, and it is
referred in the mlx5 driver as Device-Managed Flow Steering (DMFS).
Later we introduced SW-managed Flow Steering (SWS or SMFS), where the
driver is writing directly to the device's configuration memory (ICM)
through RC QP using RDMA operations (RDMA-read and RDAM-write), thus
achieving higher rates of rule insertion/deletion.
Now we introduce a new flow steering implementation: HW-Managed Flow
Steering (HWS or HMFS).
In this new approach, the driver is configuring steering rules directly
to the HW using the WQs with a special new type of WQE. This way we can
reach higher rule insertion/deletion rate with much lower CPU utilization
compared to SWS.
The key benefits of HWS as opposed to SWS:
+ HW manages the steering decision tree
- HW calculates CRC for each entry
- HW handles tree hash collisions
- HW & FW manage objects refcount
+ HW keeps cache coherency:
- HW provides tree access locking and synchronization
- HW provides notification on completion
+ Insertion rate isn’t affected by background traffic
- Dedicated HW components that handle insertion
2. Performance
--------------
Measuring Connection Tracking with simple IPv4 flows w/o NAT, we
are able to get ~5 times more flows offloaded per second using HWS.
3. Configuration
----------------
The enablement of HWS mode in eswitch manager is done using the same
devlink param that is already used for switching between FW-managed
steering and SW-managed steering modes:
# devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs
4. Upstream Submission
----------------------
HWS support consists of 3 main components:
+ Steering:
- The lower layer that exposes HWS API to upper layers and implements
all the management of flow steering building blocks
+ FS-Core
- Implementation of fs_hws layer to enable fs_core to use HWS instead
of FW or SW steering
- Create HW steering action pools to utilize the ability of HWS to
share steering actions among different rules
- Add support for configuring HWS mode through devlink command,
similar to configuring SWS mode
+ Connection Tracking
- Implementation of CT support for HW steering
- Hooks up the CT ops for the new steering mode and uses the HWS API
to implement connection tracking.
Because of the large number of patches, we need to perform the submission
in several separate patch series. This series is the first submission that
lays the ground work for the next submissions, where an actual user of HWS
will be added.
5. Patches in this series
-------------------------
This patch series contains implementation of the first bullet from above.
=======================
* tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: HWS, added API and enabled HWS support
net/mlx5: HWS, added send engine and context handling
net/mlx5: HWS, added debug dump and internal headers
net/mlx5: HWS, added backward-compatible API handling
net/mlx5: HWS, added memory management handling
net/mlx5: HWS, added vport handling
net/mlx5: HWS, added modify header pattern and args handling
net/mlx5: HWS, added FW commands handling
net/mlx5: HWS, added matchers functionality
net/mlx5: HWS, added definers handling
net/mlx5: HWS, added rules handling
net/mlx5: HWS, added tables handling
net/mlx5: HWS, added actions handling
net/mlx5: Added missing definitions in preparation for HW Steering
net/mlx5: Added missing mlx5_ifc definition for HW Steering
====================
Link: https://patch.msgid.link/20240909181250.41596-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
