summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-07bcachefs: Ensure superblock gets written when we go EROKent Overstreet
When we go emergency read-only, make sure we do a final write_super() to persist counters and error counts - this can be critical for piecing together what fsck was doing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-07bcachefs: Filter out harmless EROFS error messagesKent Overstreet
These just indicate that we're shutting down. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-07bcachefs: journal_shutdown is EROFS, not EIOKent Overstreet
We often filter out EROFS errors to avoid log spew after an emergency shutdown - journal_shutdown is just another emergency shutdown error. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-05bcachefs: Call bch2_fs_start before getting vfs superblockKent Overstreet
This reverts 1fdbe0b184c8 bcachefs: Make sure c->vfs_sb is set before starting fs switched up bch2_fs_get_tree() so that we got a superblock before calling bch2_fs_start, so that c->vfs_sb would always be initialized while the filesystem was active. This turned out not to be necessary, because blk_holder_ops were implemented using our own locking, not vfs locking. And this had the side effect of creating a super_block and doing our full recovery (including potentially fsck) before setting SB_BORN, which causes things like sync calls to hang until our recovery is finished. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-05bcachefs: fix hung task timeout in journal readKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-05bcachefs: Add missing barriers before wake_up_bit()Kent Overstreet
wake_up() doesn't require a barrier - but wake_up_bit() does. This only affected non x86, and primarily lead to lost wakeups after btree node reads. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-05bcachefs: Ensure proper write alignmentKent Overstreet
There was a buggy version of bcachefs-tools which picked misaligned bucket sizes when formatting, and we're also about to do dynamic block sizes - which will allow picking logical block size or physical block size of the device per-write, allowing for better compression ratios at the cost of slightly worse write performance (i.e. forcing the device to do RMW or extra buffering). To account for this, tweak bch2_alloc_sectors_start() to properly align open_buckets to the blocksize of the write we're about to do. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-05bcachefs: Improve want_cached_ptr()Kent Overstreet
If promote target isn't set, rebalance should still leave a cached copy on the faster device. Fall back to foreground_target if it's set, or allow a cached copy on any device if neither are set. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-04bcachefs: thread_with_stdio: fix spinning instead of exitingKent Overstreet
bch2_stdio_redirect_vprintf() was missing a check for stdio->done, i.e. exiting. This caused the thread attempting to print to spin, and since it was being called from the kthread ran by thread_with_stdio, the userspace side hung as well. Change it to return -EPIPE - i.e. writing to a pipe that's been closed. Reported-by: Jan Solanti <jhs@psonet.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-01bcachefs: Remove incorrect __counted_by annotationAlan Huang
This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr with __counted_by()"). After the x_name, there is a value. According to the disscussion[1], __counted_by assumes that the flexible array member contains exactly the amount of elements that are specified. Now there are users came across a false positive detection of an out of bounds write caused by the __counted_by here[2], so revert that. [1] https://lore.kernel.org/lkml/Zv8VDKWN1GzLRT-_@archlinux/T/#m0ce9541c5070146320efd4f928cc1ff8de69e9b2 [2] https://privatebin.net/?a0d4e97d590d71e1#9bLmp2Kb5NU6X6cZEucchDcu88HzUQwHUah8okKPReEt Signed-off-by: Alan Huang <mmpgouride@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-01bcachefs: add missing sched_annotate_sleep()Kent Overstreet
00594 ------------[ cut here ]------------ 00594 do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000003e51ef4a>] prepare_to_wait_event+0x5c/0x1c0 00594 WARNING: CPU: 12 PID: 1117 at kernel/sched/core.c:8741 __might_sleep+0x74/0x88 00594 Modules linked in: 00594 CPU: 12 UID: 0 PID: 1117 Comm: umount Not tainted 6.15.0-rc4-ktest-g3a72e369412d #21845 PREEMPT 00594 Hardware name: linux,dummy-virt (DT) 00594 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00594 pc : __might_sleep+0x74/0x88 00594 lr : __might_sleep+0x74/0x88 00594 sp : ffffff80c8d67a90 00594 x29: ffffff80c8d67a90 x28: ffffff80f5903500 x27: 0000000000000000 00594 x26: 0000000000000000 x25: ffffff80cf5002a0 x24: ffffffc087dad000 00594 x23: ffffff80c8d67b40 x22: 0000000000000000 x21: 0000000000000000 00594 x20: 0000000000000242 x19: ffffffc080b92020 x18: 00000000ffffffff 00594 x17: 30303c5b20746120 x16: 74657320323d6574 x15: 617473203b474e49 00594 x14: 0000000000000001 x13: 00000000000c0000 x12: ffffff80facc0000 00594 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0800b0774 00594 x8 : c0000000fffbffff x7 : ffffffc087dac670 x6 : 00000000015fffa8 00594 x5 : ffffff80facbffa8 x4 : ffffff80fbd30b90 x3 : 0000000000000000 00594 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff80f5903500 00594 Call trace: 00594 __might_sleep+0x74/0x88 (P) 00594 __mutex_lock+0x64/0x8d8 00594 mutex_lock_nested+0x28/0x38 00594 bch2_fs_ec_flush+0xf8/0x128 00594 __bch2_fs_read_only+0x54/0x1d8 00594 bch2_fs_read_only+0x3e0/0x438 00594 __bch2_fs_stop+0x5c/0x250 00594 bch2_put_super+0x18/0x28 00594 generic_shutdown_super+0x6c/0x140 00594 bch2_kill_sb+0x1c/0x38 00594 deactivate_locked_super+0x54/0xd0 00594 deactivate_super+0x70/0x90 00594 cleanup_mnt+0xec/0x188 00594 __cleanup_mnt+0x18/0x28 00594 task_work_run+0x90/0xd8 00594 do_notify_resume+0x138/0x148 00594 el0_svc+0x9c/0xa0 00594 el0t_64_sync_handler+0x104/0x130 00594 el0t_64_sync+0x154/0x158 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-01bcachefs: Fix __bch2_dev_group_set()Kent Overstreet
bch2_sb_disk_groups_to_cpu() goes off of the superblock member info, so we need to set that first. Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-01bcachefs: Kill ERO for i_blocks check in truncateKent Overstreet
Replace with logging the error in the superblock. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-01bcachefs: check for inode.bi_sectors underflowKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-01bcachefs: Kill ERO in __bch2_i_sectors_acct()Kent Overstreet
We won't be root causing this in the immediate future, and it's fairly innocuous - so just log it in the superblock. https://github.com/koverstreet/bcachefs/issues/869 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-30bcachefs: readdir fixesKent Overstreet
- Don't call bch2_trans_relock() after dir_emit(); taking a transaction restart here will cause us to emit the same dirent to userspace twice - Fix incorrect checking of the return value on dir_emit(): "true" means success, keep going, but bch2_dir_emit() needs to return true when we're finished iterating. https://github.com/koverstreet/bcachefs/issues/867 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-30bcachefs: improve missing journal write device error messageKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Topology error after insert is now an EROKent Overstreet
A user hit this, and this will naturally be easier to debug if we don't panic. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Use bch2_kvmalloc() for journal keys arrayKent Overstreet
We can hit this limit fairly easy when we have to reconstuct large amounts of alloc info on large filesystems. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: More informative error message when shutting down due to errorKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: btree_root_unreadable_and_scan_found_nothing autofix for non data ↵Kent Overstreet
btrees If loosing a btree won't cause data loss - i.e. it's an alloc btree, or we can easily reconstruct it - we shouldn't require user action to continue repair. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: btree_node_data_missing is now autofixKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Don't generate alloc updates to invalid bucketsKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Improve bch2_dev_bucket_missing()Kent Overstreet
More useful error message. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: fix bch2_dev_buckets_resize()Kent Overstreet
The resize memcpy path was totally busted. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Add upgrade table entry from 0.14Kent Overstreet
There are a few errors that needed to be marked as autofix. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Run BCH_RECOVERY_PASS_reconstruct_snapshots on missing subvol -> ↵Kent Overstreet
snapshot Fix this repair path. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Add missing utf8_unload()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Emit unicode version message on startupKent Overstreet
fstests expects this Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Use generic_set_sb_d_ops for standard casefolding d_opsKent Overstreet
Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-28bcachefs: Fix losing return code in next_fiemap_extent()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-27Linux 6.15-rc4Linus Torvalds
2025-04-26Merge tag 'pci-v6.15-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fixes from Bjorn Helgaas: - When releasing a start-aligned resource, e.g., a bridge window, save start/end/flags for the next assignment attempt; fixes a v6.15-rc1 regression (Ilpo Järvinen) - Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl selftest v6.15-rc1 regression (Ilpo Järvinen) - Add Manivannan Sadhasivam as maintainer of native host bridge and endpoint drivers (Manivannan Sadhasivam) - In endpoint test driver, defer IRQ allocation from .probe() until ioctl() to fix a regression on platforms where the Vendor/Device ID match doesn't include driver_data (Niklas Cassel) * tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE) MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer selftests/pcie_bwctrl: Fix test progs list PCI: Restore assigned resources fully after release
2025-04-26Merge tag 'nfsd-6.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Revert a v6.15 patch due to a report of SELinux test failures * tag 'nfsd-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: Revert "sunrpc: clean cache_detail immediately when flush is written frequently"
2025-04-26Merge tag 'x86-urgent-2025-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - Fix 32-bit kernel boot crash if passed physical memory with more than 32 address bits - Fix Xen PV crash - Work around build bug in certain limited build environments - Fix CTEST instruction decoding in insn_decoder_test * tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/insn: Fix CTEST instruction decoding x86/boot: Work around broken busybox 'truncate' tool x86/mm: Fix _pgd_alloc() for Xen PV mode x86/e820: Discard high memory that can't be addressed by 32-bit systems
2025-04-26Merge tag 'sched-urgent-2025-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix sporadic crashes in dequeue_entities() due to ... bad math. [ Arguably if pick_eevdf()/pick_next_entity() was less trusting of complex math being correct it could have de-escalated a crash into a warning, but that's for a different patch ]" * tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash
2025-04-26Merge tag 'perf-urgent-2025-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc perf events fixes from Ingo Molnar: - Use POLLERR for events in error state, instead of the ambiguous POLLHUP error value - Fix non-sampling (counting) events on certain x86 platforms * tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix non-sampling (counting) events on certain x86 platforms perf/core: Change to POLLERR for pinned events with error
2025-04-26Merge tag 'irq-urgent-2025-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "Fix crashes in the gic-v2m irqchip driver, caused by an incorrect __init annotation" * tag 'irq-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()
2025-04-26Merge tag 'loongarch-fixes-6.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Add a missing Kconfig option, fix some bugs in exception handlers, memory management and KVM" * tag 'loongarch-fixes-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Fix PMU pass-through issue if VM exits to host finally LoongArch: KVM: Fully clear some CSRs when VM reboot LoongArch: KVM: Fix multiple typos of KVM code LoongArch: Return NULL from huge_pte_offset() for invalid PMD LoongArch: Remove a bogus reference to ZONE_DMA LoongArch: Handle fp, lsx, lasx and lbt assembly symbols LoongArch: Make do_xyz() exception handlers more robust LoongArch: Make regs_irqs_disabled() more clear LoongArch: Select ARCH_USE_MEMTEST
2025-04-26Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC updates from Stafford Horne: - Support for cacheinfo API to expose OpenRISC cache info via sysfs, this also translated to some cleanups to OpenRISC cache flush and invalidate API's - Documentation updates for new mailing list and toolchain binaries * tag 'for-linus' of https://github.com/openrisc/linux: Documentation: openrisc: Update toolchain binaries URL Documentation: openrisc: Update mailing list openrisc: Add cacheinfo support openrisc: Introduce new utility functions to flush and invalidate caches openrisc: Refactor struct cpuinfo_or1k to reduce duplication
2025-04-26Revert "sunrpc: clean cache_detail immediately when flush is written frequently"Chuck Lever
Ondrej reports that certain SELinux tests are failing after commit fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently"), merged during the v6.15 merge window. Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Fixes: fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-04-26Merge tag 'move-lib-kunit-v6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kunit fix from Kees Cook: "A single fix for the kunit lib/tests/ relocation: - Ensure prime numbers tests are included in KUnit test runs (Mark Brown)" * tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lib: Ensure prime numbers tests are included in KUnit test runs
2025-04-26Merge tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes, mostly amdgpu, with some exynos cleanups and a couple of minor fixes, seems a bit quiet, but probably some lag from Easter holidays. amdgpu: - P2P DMA fixes - Display reset fixes - DCN 3.5 fixes - ACPI EDID fix - LTTPR fix - mode_valid() fix exynos: - fix spelling error - remove redundant error handling in exynos_drm_vidi.c module - marks struct decon_data as const in the exynos7_drm_decon driver since it is only read - Remove unnecessary checking in exynos_drm_drv.c module meson: - Fix VCLK calculation panel: - jd9365a: Fix reset polarity" * tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernel: drm/exynos: Fix spelling mistake "enqueu" -> "enqueue" drm/exynos: exynos7_drm_decon: Consstify struct decon_data drm/exynos: fixed a spelling error drm/exynos/vidi: Remove redundant error handling in vidi_get_modes() drm/exynos: Remove unnecessary checking drm/amd/display: do not copy invalid CRTC timing info drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinks drm/amd/display: Fix ACPI edid parsing on some Lenovo systems drm/amdgpu: Allow P2P access through XGMI drm/amd/display: Enable urgent latency adjustment on DCN35 drm/amd/display: Force full update in gpu reset drm/amd/display: Fix gpu reset in multidisplay config drm/amdgpu: Don't pin VRAM without DMABUF_MOVE_NOTIFY drm/amdgpu: Use allowed_domains for pinning dmabufs drm: panel: jd9365da: fix reset signal polarity in unprepare drm/meson: use unsigned long long / Hz for frequency types Revert "drm/meson: vclk: fix calculation of 59.94 fractional rates"
2025-04-26sched/eevdf: Fix se->slice being set to U64_MAX and resulting crashOmar Sandoval
There is a code path in dequeue_entities() that can set the slice of a sched_entity to U64_MAX, which sometimes results in a crash. The offending case is when dequeue_entities() is called to dequeue a delayed group entity, and then the entity's parent's dequeue is delayed. In that case: 1. In the if (entity_is_task(se)) else block at the beginning of dequeue_entities(), slice is set to cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX. 2. The first for_each_sched_entity() loop dequeues the entity. 3. If the entity was its parent's only child, then the next iteration tries to dequeue the parent. 4. If the parent's dequeue needs to be delayed, then it breaks from the first for_each_sched_entity() loop _without updating slice_. 5. The second for_each_sched_entity() loop sets the parent's ->slice to the saved slice, which is still U64_MAX. This throws off subsequent calculations with potentially catastrophic results. A manifestation we saw in production was: 6. In update_entity_lag(), se->slice is used to calculate limit, which ends up as a huge negative number. 7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit is negative, vlag > limit, so se->vlag is set to the same huge negative number. 8. In place_entity(), se->vlag is scaled, which overflows and results in another huge (positive or negative) number. 9. The adjusted lag is subtracted from se->vruntime, which increases or decreases se->vruntime by a huge number. 10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which incorrectly returns false because the vruntime is so far from the other vruntimes on the queue, causing the (vruntime - cfs_rq->min_vruntime) * load calulation to overflow. 11. Nothing appears to be eligible, so pick_eevdf() returns NULL. 12. pick_next_entity() tries to dereference the return value of pick_eevdf() and crashes. Dumping the cfs_rq states from the core dumps with drgn showed tell-tale huge vruntime ranges and bogus vlag values, and I also traced se->slice being set to U64_MAX on live systems (which was usually "benign" since the rest of the runqueue needed to be in a particular state to crash). Fix it in dequeue_entities() by always setting slice from the first non-empty cfs_rq. Fixes: aef6987d8954 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy") Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/f0c2d1072be229e1bdddc73c0703919a8b00c652.1745570998.git.osandov@fb.com
2025-04-26irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()Suzuki K Poulose
With ACPI in place, gicv2m_get_fwnode() is registered with the pci subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime during a PCI host bridge probe. But, the call back is wrongly marked as __init, causing it to be freed, while being registered with the PCI subsystem and could trigger: Unable to handle kernel paging request at virtual address ffff8000816c0400 gicv2m_get_fwnode+0x0/0x58 (P) pci_set_bus_msi_domain+0x74/0x88 pci_register_host_bridge+0x194/0x548 This is easily reproducible on a Juno board with ACPI boot. Retain the function for later use. Fixes: 0644b3daca28 ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support") Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org
2025-04-26LoongArch: KVM: Fix PMU pass-through issue if VM exits to host finallyBibo Mao
In function kvm_pre_enter_guest(), it prepares to enter guest and check whether there are pending signals or events. And it will not enter guest if there are, PMU pass-through preparation for guest should be cancelled and host should own PMU hardware. Cc: stable@vger.kernel.org Fixes: f4e40ea9f78f ("LoongArch: KVM: Add PMU support for guest") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: KVM: Fully clear some CSRs when VM rebootBibo Mao
Some registers such as LOONGARCH_CSR_ESTAT and LOONGARCH_CSR_GINTC are partly cleared with function _kvm_setcsr(). This comes from the hardware specification, some bits are read only in VM mode, and however they can be written in host mode. So they are partly cleared in VM mode, and can be fully cleared in host mode. These read only bits show pending interrupt or exception status. When VM reset, the read-only bits should be cleared, otherwise vCPU will receive unknown interrupts in boot stage. Here registers LOONGARCH_CSR_ESTAT/LOONGARCH_CSR_GINTC are fully cleared in ioctl KVM_REG_LOONGARCH_VCPU_RESET vCPU reset path. Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: KVM: Fix multiple typos of KVM codeYulong Han
Fix multiple typos inside arch/loongarch/kvm. Cc: stable@vger.kernel.org Reviewed-by: Yuli Wang <wangyuli@uniontech.com> Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Yulong Han <wheatfox17@icloud.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: Return NULL from huge_pte_offset() for invalid PMDMing Wang
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot even if the underlying entry points to invalid_pte_table (indicating no mapping). Callers like smaps_hugetlb_range() fetch this invalid entry value (the address of invalid_pte_table) via this pointer. The generic is_swap_pte() check then incorrectly identifies this address as a swap entry on LoongArch, because it satisfies the "!pte_present() && !pte_none()" conditions. This misinterpretation, combined with a coincidental match by is_migration_entry() on the address bits, leads to kernel crashes in pfn_swap_entry_to_page(). Fix this at the architecture level by modifying huge_pte_offset() to check the PMD entry's content using pmd_none() before returning. If the entry is invalid (i.e., it points to invalid_pte_table), return NULL instead of the pointer to the slot. Cc: stable@vger.kernel.org Acked-by: Peter Xu <peterx@redhat.com> Co-developed-by: Hongchen Zhang <zhanghongchen@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> Signed-off-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: Remove a bogus reference to ZONE_DMAPetr Tesarik
Remove dead code. LoongArch does not have a DMA memory zone (24bit DMA). The architecture does not even define MAX_DMA_PFN. Cc: stable@vger.kernel.org Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Signed-off-by: Petr Tesarik <ptesarik@suse.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
generated by cgit (git 2.34.1) at 2025-09-07 08:18:16 +0000