summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-29ASoC: sunxi: sun4i-i2s: fix LRCLK polarity in i2s modeMatteo Martelli
This fixes the LRCLK polarity for sun8i-h3 and sun50i-h6 in i2s mode which was wrongly inverted. The LRCLK was being set in reversed logic compared to the DAI format: inverted LRCLK for SND_SOC_DAIFMT_IB_NF and SND_SOC_DAIFMT_NB_NF; normal LRCLK for SND_SOC_DAIFMT_IB_IF and SND_SOC_DAIFMT_NB_IF. Such reversed logic applies properly for DSP_A, DSP_B, LEFT_J and RIGHT_J modes but not for I2S mode, for which the LRCLK signal results reversed to what expected on the bus. The issue is due to a misinterpretation of the LRCLK polarity bit of the H3 and H6 i2s controllers. Such bit in this case does not mean "0 => normal" or "1 => inverted" according to the expected bus operation, but it means "0 => frame starts on low edge" and "1 => frame starts on high edge" (from the User Manuals). This commit fixes the LRCLK polarity by setting the LRCLK polarity bit according to the selected bus mode and renames the LRCLK polarity bit definition to avoid further confusion. Fixes: dd657eae8164 ("ASoC: sun4i-i2s: Fix the LRCK polarity") Fixes: 73adf87b7a58 ("ASoC: sun4i-i2s: Add support for H6 I2S") Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com> Link: https://patch.msgid.link/20240801-asoc-fix-sun4i-i2s-v2-1-a8e4e9daa363@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-29drm/i915: deprecate the i915.modeset module parameterJani Nikula
The i915.modeset parameter doesn't really provide any useful benefit over the nomodeset kernel parameter. Anything that i915.modeset does can be achieved via nomodeset or not probing i915 at all. Unfortunately, the i915.modeset parameter is widely referenced on various forums, and removing it is not that simple. Start off by deprecating it in the module parameter documentation, and logging a warning message on non-default values. Cc: Daniel Veter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/2c63e2048eed64f728478fbcfc84f51c7f3212e6.1724843853.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/i915: fail module probe on nomodeset and i915.modeset=0Jani Nikula
Since commit b30324adaf8d ("drm/i915: Deprecated UMS support") we've silently failed the probe, without propagating errors, on nomodeset and i915.modeset=0. This has been to not upset userspace. See the above commit for details. Since then, we've removed both the UMS and KMS kconfig options in commit 03dae59c72ff ("drm/i915: Ditch UMS config option") and commit fd930478fb79 ("drm/i915: Remove KMS Kconfig option") respectively. Another ten years or so have passed. Continue with the deprecation by actually failing the probe with nomodeset and i915.modeset=0. Cc: Daniel Veter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1f34651ae8ae96dd5ecd9969b5bc43d23feda08c.1724843853.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/mediatek: Use spin_lock_irqsave() for CRTC event lockFei Shao
Use the state-aware spin_lock_irqsave() and spin_unlock_irqrestore() to avoid unconditionally re-enabling the local interrupts. Fixes: 411f5c1eacfe ("drm/mediatek: handle events when enabling/disabling crtc") Signed-off-by: Fei Shao <fshao@chromium.org> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240828101511.3269822-1-fshao@chromium.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-08-29drm/mediatek: Fix missing configuration flags in mtk_crtc_ddp_config()Jason-JH.Lin
In mtk_crtc_ddp_config(), mtk_crtc will use some configuration flags to generate instructions to cmdq_handle, such as: state->pending_config mtk_crtc->pending_planes plane_state->pending.config mtk_crtc->pending_async_planes plane_state->pending.async_config These configuration flags may be set to false when a GCE IRQ comes calling ddp_cmdq_cb(). This may result in missing prepare instructions, especially if mtk_crtc_update_config() with the flase need_vblank (no need to wait for vblank) cases. Therefore, the mtk_crtc->config_updating flag is set at the beginning of mtk_crtc_update_config() to ensure that these configuration flags won't be changed when the mtk_crtc_ddp_config() is preparing instructions. But somehow the ddp_cmdq_cb() didn't use the mtk_crtc->config_updating flag to prevent those pending config flags from being cleared. To avoid missing the configuration when generating the config instruction, the config_updating flag should be added into ddp_cmdq_cb() and be protected with spin_lock. Fixes: 7f82d9c43879 ("drm/mediatek: Clear pending flag when cmdq packet is done") Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Fei Shao <fshao@chromium.org> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240827-drm-fixup-0819-v3-1-4761005211ec@mediatek.com/ Link: https://patchwork.kernel.org/project/dri-devel/patch/20240827-drm-fixup-0819-v3-2-4761005211ec@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-08-29drm/mediatek: dsi: Add dsi per-frame lp code for mt8188Shuijing Li
Adding the per-frame lp function of mt8188, which can keep HFP in HS and reduce the time required for each line to enter and exit low power. Per Frame LP: |<----------One Active Frame-------->| --______________________________________----___________________ ^HSA+HBP^^RGB^^HFP^^HSA+HBP^^RGB^^HFP^ ^HSA+HBP^^RGB^^HFP^ Per Line LP: |<---------------One Active Frame----------->| --______________--______________--______________----______________ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ Signed-off-by: Shuijing Li <shuijing.li@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240826060654.24038-1-shuijing.li@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-08-29drm/mediatek: Drop unnecessary check for property presenceRob Herring (Arm)
of_property_read_u32() returns -EINVAL if a property is not present, so the preceding check for presence with of_find_property() can be dropped. Really, what the errno is shouldn't matter. Either the property can be read and used or it can't and is ignored. This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240731201407.1838385-1-robh@kernel.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-08-29drm/mediatek: Declare Z Position for all planesAngeloGioacchino Del Regno
MediaTek SoCs support multiple planes, one of which is the primary and all the others are overlays (and CURSOR is the last overlay). In all currently supported SoCs, the Z order of the overlays can't be changed with any fast muxing action, and can only be changed by swapping the contents of the entire register set of one overlay with the other to internally reorder the layer properties, which is indeed feasible, but probably more expensive than desired. Declare the Z position for all planes with an immutable property at least for now, so that the userspace can take its decisions accordingly. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Fei Shao <fshao@chromium.org> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240718082507.216764-1-angelogioacchino.delregno@collabora.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-08-29drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16Karthik Poosa
WRITE_I1 sub-command of the POWER_SETUP pcode command accepts a u16 parameter instead of u32. This change prevents potential illegal sub-command errors. v2: Mask uval instead of changing the prototype. (Badal) v3: Rephrase commit message. (Badal) Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power") Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240827155301.183383-1-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit a7f657097e96d8fa745c74bb1a239ebd5a8c971c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-29Merge patch series "riscv: mm: Do not restrict mmap address based on hint"Palmer Dabbelt
Charlie Jenkins <charlie@rivosinc.com> says: There have been a couple of reports that using the hint address to restrict the address returned by mmap hint address has caused issues in applications. A different solution for restricting addresses returned by mmap is necessary to avoid breakages. [Palmer: This also just wasn't doing the right thing in the first place, as it didn't handle the sv39 cases we were trying to deal with.] * b4-shazam-merge: riscv: mm: Do not restrict mmap address based on hint riscv: selftests: Remove mmap hint address checks Revert "RISC-V: mm: Document mmap changes" Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-0-cd8962afe47f@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-08-29ASoC: amd: yc: Add a quirk for MSI Bravo 17 (D7VEK)Markuss Broks
MSI Bravo 17 (D7VEK), like other laptops from the family, has broken ACPI tables and needs a quirk for internal mic to work. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Link: https://patch.msgid.link/20240829130313.338508-1-markuss.broks@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-29riscv: mm: Do not restrict mmap address based on hintCharlie Jenkins
The hint address should not forcefully restrict the addresses returned by mmap as this causes mmap to report ENOMEM when there is memory still available. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Fixes: b5b4287accd7 ("riscv: mm: Use hint address in mmap if available") Fixes: add2cc6b6515 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57") Closes: https://lore.kernel.org/linux-kernel/ZbxTNjQPFKBatMq+@ghost/T/#mccb1890466bf5a488c9ce7441e57e42271895765 Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-3-cd8962afe47f@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-08-29riscv: selftests: Remove mmap hint address checksCharlie Jenkins
The mmap behavior that restricts the addresses returned by mmap caused unexpected behavior, so get rid of the test cases that check that behavior. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Fixes: 73d05262a2ca ("selftests: riscv: Generalize mm selftests") Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-2-cd8962afe47f@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-08-29Revert "RISC-V: mm: Document mmap changes"Charlie Jenkins
This mmap behavior caused unintended breakages so the behavior has been changed. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-1-cd8962afe47f@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-08-29spi: spidev: Add an entry for elgin,jg10309-01Fabio Estevam
The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace. The marking on the LCD is JG10309-01. Add the "elgin,jg10309-01" compatible string. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://patch.msgid.link/20240828180057.3167190-2-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-29drm/i915/dsb: Use chained DSBs for LUT programmingVille Syrjälä
In order to better handle the necessary DSB DEwake tricks let's switch over to using a chained DSB for the actual LUT programming. The CPU will start 'dsb_color_commit', which in turn will start the chained 'dsb_color_vblank'. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-15-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: s/dsb/dsb_color_vblank/Ville Syrjälä
We'll soon utilize several DSBs during the commit. To that end rename the current crtc_state->dsb to crtc_state->dsb_color_vblank to better reflect its role (color managemnent stuff programmed during vblank). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-14-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Clear DSB_ENABLE_DEWAKE once the DSB is doneVille Syrjälä
In order to avoid the DSB keeping the DEwake permanently asserted we must clear DSB_PMCTRL_2.DSB_FORCE_DEWAKE once we are done. For good measure do the same for DSB_PMCTRL.DSB_ENABLE_DEWAKE. Experimentally this doens't seem to be actually necessary (unlike with DSB_FORCE_DEWAKE). That is, the DSB_ENABLE_DEWAKE doesn't seem to do anything whenever the DSB is not active. But I'd hate to waste a ton of power in case there I'm wrong and there is some way DEwake could remaing asserted. One extra register write is a small price to pay for some peace of mind. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-13-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Allow intel_dsb_chain() to use DSB_WAIT_FOR_VBLANKVille Syrjälä
Allow intel_dsb_chain() to start the chained DSB at start of the undelaye vblank. This is slightly more involved than simply setting the bit as we must use the DEwake mechanism to eliminate pkgC latency. And DSB_ENABLE_DEWAKE itself is problematic in that it allows us to configure just a single scanline, and if the current scanline is already past that DSB_ENABLE_DEWAKE won't do anything, rendering the whole thing moot. The current workaround involves checking the pipe's current scanline with the CPU, and if it looks like we're about to miss the configured DEwake scanline we set DSB_FORCE_DEWAKE to immediately assert DEwake. This is somewhat racy since the hardware is making progress all the while we're checking it on the CPU. We can make things less racy by chaining two DSBs and handling the DSB_FORCE_DEWAKE stuff entirely without CPU involvement: 1. CPU starts the first DSB immediately 2. First DSB configures the second DSB, including its dewake_scanline 3. First DSB starts the second w/ DSB_WAIT_FOR_VBLANK 4. First DSB asserts DSB_FORCE_DEWAKE 5. First DSB waits until we're outside the dewake_scanline-vblank_start window 6. First DSB deasserts DSB_FORCE_DEWAKE That will guarantee that the we are fully awake when the second DSB starts to actually execute. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-12-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Introduce intel_dsb_chain()Ville Syrjälä
In order to handle the DEwake tricks without involving the CPU we need a mechanism by which one DSB can start another one. Add a basic function to do so. We'll extend it later with additional code to actually deal with DEwake. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-11-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Introduce intel_dsb_wait_scanline_{in,out}()Ville Syrjälä
Add functions to emit a DSB scanline window wait instructions. We can either wait for the scanline to be IN the window or OUT of the window. The hardware doesn't handle wraparound so we must manually deal with it by swapping the IN range to the inverse OUT range, or vice versa. Also add a bit of paranoia to catch the edge case of waiting for the entire frame. That doesn't make sense since an IN wait would be a nop, and an OUT wait would imply waiting forever. Most of the time this also results in both scanline ranges (original and inverted) to have lower=upper+1 which is nonsense from the hw POV. For now we are only handling the case where the scanline wait happens prior to latching the double buffered registers during the commit (which might change the timings due to LRR/VRR/etc.) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-10-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Precompute DSB_CHICKENVille Syrjälä
Adjust the code that determines the correct DSB_CHICKEN value to be usable for use within DSB commands themselves. Ie. precompute it based on our knowledge of what the hardware state (VRR vs. not mainly) will be at the time of the commit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-9-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Account for VRR properly in DSB scanline stuffVille Syrjälä
When determining various scanlines for DSB use we should take into account whether VRR is active at the time when the DSB uses said scanline information. For now all DSB scanline usage occurs prior to the actual commit, so we only need to care about the state of VRR at that time. I've decided to move intel_crtc_scanline_to_hw() in its entirety to the DSB code as it will also need to know the actual state of VRR in order to do its job 100% correctly. TODO: figure out how much of this could be moved to some more generic place and perhaps be shared with the CPU vblank evasion code/etc... Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-8-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Fix dewake scanlineVille Syrjälä
Currently we calculate the DEwake scanline based on the delayed vblank start, while in reality it should be computed based on the undelayed vblank start (as that is where the DSB actually starts). Currently it doesn't really matter as we don't have any vblank delay configured, but that may change in the future so let's be accurate in what we do. We can also remove the max() as intel_crtc_scanline_to_hw() can deal with negative numbers, which there really shouldn't be anyway. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-7-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Shuffle code aroundVille Syrjälä
Relocate intel_dsb_dewake_scanline() and dsb_chicken() upwards in the file. I need to reuse these while emitting DSB commands, and I'd like to keep the DSB command emission stuff more or less grouped together in the file. Also drop the intel_ prefix from intel_dsb_dewake_scanline() since it's all internal stuff and thus doesn't need so much namespacing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-6-ville.syrjala@linux.intel.com Reviewed-by: Animesh manna <animesh.manna@intel.com>
2024-08-29drm/i915/dsb: Convert dewake_scanline to a hw scanline number earlierVille Syrjälä
Currently we switch from out software idea of a scanline to the hw's idea of a scanline during the commit phase in _intel_dsb_commit(). While that is slightly easier due to fastsets fiddling with the timings, we'll also need to generate proper hw scanline numbers already when emitting DSB scanline wait instructions. So this approach won't do in the future. Switch to hw scanline numbers earlier. Also intel_dsb_dewake_scanline() itself already makes some assumptions about VRR that don't take into account VRR toggling during fastsets, so technically delaying the sw->hw conversion doesn't even help us. The other reason for delaying the conversion was that we are using intel_get_crtc_scanline() during intel_dsb_commit() which gives us the current sw scanline. But this is pretty low level stuff anyway so just using raw PIPEDSL reads seems fine here, and that of course gives us the hw scanline directly, reducing the need to do so many conversions. v2: Return the non-hw scanline from intel_dsb_dewake_scanline() Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-5-ville.syrjala@linux.intel.com
2024-08-29drm/i915/dsb: Hook up DSB error interruptsVille Syrjälä
Enable all DSB error/fault interrupts so that we can see if anything goes terribly wrong. v2: Pass intel_display to DISPLAY_VER() (Jani) Drop extra '/' from drm_err() for consistency v3: Reorder the irq handler a bit Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625135852.13431-1-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2024-08-29drm/tiny/gm12u320: convert to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for allocating the EDID and updating the connector. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/c31c3afa883a3321345608c480c26161b638a83e.1724348429.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/ipuv3/parallel: convert to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for storing the EDID and updating the connector. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a1698044d556072e79041d69b8702099fd17bd90.1724348429.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/tegra: convert to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for reading the EDID and updating the connector. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/e764b50f4ad2de95e449ccb37f49c3f37b3333fc.1724348429.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/sti/sti_hdmi: convert to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for reading the EDID and updating the connector. The functional change is that the CEC physical address gets invalidated when the EDID could not be read. v2: Use drm_edid_read() instead of drm_edid_read_ddc() (Sima) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/25879a0183e30792bf0d63bdf56a03f11018e4a3.1724348429.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/i915: Fix readout degamma_lut mismatch on ilk/snbVille Syrjälä
On ilk/snb the pipe may be configured to place the LUT before or after the CSC depending on various factors, but as there is only one LUT (no split mode like on IVB+) we only advertise a gamma_lut and no degamma_lut in the uapi to avoid confusing userspace. This can cause a problem during readout if the VBIOS/GOP enabled the LUT in the pre CSC configuration. The current code blindly assigns the results of the readout to the degamma_lut, which will cause a failure during the next atomic_check() as we aren't expecting anything to be in degamma_lut since it's not visible to userspace. Fix the problem by assigning whatever LUT we read out from the hardware into gamma_lut. Cc: stable@vger.kernel.org Fixes: d2559299d339 ("drm/i915: Make ilk_read_luts() capable of degamma readout") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2024-08-29drm/panel: nv3051d: Transition to mipi_dsi_dcs_write_seq_multiAbhishek Tamboli
Replace deprecated 'mipi_dsi_dcs_write_seq()' macro to 'mipi_dsi_dcs_write_seq_multi' macro in panel_nv3051d_init_sequence function. Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240827152504.30586-1-abhishektamboli9@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240827152504.30586-1-abhishektamboli9@gmail.com
2024-08-29drm/panel: novatek-nt35950: transition to mipi_dsi wrapped functionsTejas Vipin
Changes the novatek-nt35950 panel to use multi style functions for improved error handling. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828182210.565861-1-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828182210.565861-1-tejasvipin76@gmail.com
2024-08-29drm/panel: visionox-vtdr6130: switch to devm_regulator_bulk_get_constNeil Armstrong
Switch to devm_regulator_bulk_get_const() to stop setting the supplies list in probe(), and move the regulator_bulk_data struct in static const. Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org
2024-08-29drm/panel: visionox-vtdr6130: switch to mipi_dsi wrapped functionsNeil Armstrong
Make usage of the new _multi() mipi_dsi functions instead of the deprecated macros, improving error handling and printing. bloat-o-meter gives a 12% gain on arm64: Function old new delta visionox_vtdr6130_unprepare 208 204 -4 visionox_vtdr6130_prepare 1192 896 -296 Total: Before=2348, After=2048, chg -12.78% Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org
2024-08-29nfc: pn533: Add poll mod list filling checkAleksandr Mishin
In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29fuse: disable the combination of passthrough and writeback cacheBernd Schubert
Current design and handling of passthrough is without fuse caching and with that FUSE_WRITEBACK_CACHE is conflicting. Fixes: 7dc4e97a4f9a ("fuse: introduce FUSE_PASSTHROUGH capability") Cc: stable@kernel.org # v6.9 Signed-off-by: Bernd Schubert <bschubert@ddn.com> Acked-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-08-29Merge tag 'nf-24-08-28' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes payload from netdev/egress by subtracting skb_network_offset() when validating IPv4 packet length, otherwise 'meta l4proto udp' never matches. Patch #2 subtracts skb_network_offset() when validating IPv6 packet length for netdev/egress. netfilter pull request 24-08-28 * tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation netfilter: nf_tables: restore IP sanity checks for netdev/egress ==================== Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mailmap: update entry for Sriram YagnaramanSriram Yagnaraman
Link my old est.tech address to my active mail address Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://patch.msgid.link/20240828072417.4111996-1-sriram.yagnaraman@ericsson.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29Merge branch 'mptcp-more-fixes-for-the-in-kernel-pm'Paolo Abeni
Matthieu Baerts says: ==================== mptcp: more fixes for the in-kernel PM Here is a new batch of fixes for the MPTCP in-kernel path-manager: Patch 1 ensures the address ID is set to 0 when the path-manager sends an ADD_ADDR for the address of the initial subflow. The same fix is applied when a new subflow is created re-using this special address. A fix for v6.0. Patch 2 is similar, but for the case where an endpoint is removed: if this endpoint was used for the initial address, it is important to send a RM_ADDR with this ID set to 0, and look for existing subflows with the ID set to 0. A fix for v6.0 as well. Patch 3 validates the two previous patches. Patch 4 makes the PM selecting an "active" path to send an address notification in an ACK, instead of taking the first path in the list. A fix for v5.11. Patch 5 fixes skipping the establishment of a new subflow if a previous subflow using the same pair of addresses is being closed. A fix for v5.13. Patch 6 resets the ID linked to the initial subflow when the linked endpoint is re-added, possibly with a different ID. A fix for v6.0. Patch 7 validates the three previous patches. Patch 8 is a small fix for the MPTCP Join selftest, when being used with older subflows not supporting all MIB counters. A fix for a commit introduced in v6.4, but backported up to v5.10. Patch 9 avoids the PM to try to close the initial subflow multiple times, and increment counters while nothing happened. A fix for v5.10. Patch 10 stops incrementing local_addr_used and add_addr_accepted counters when dealing with the address ID 0, because these counters are not taking into account the initial subflow, and are then not decremented when the linked addresses are removed. A fix for v6.0. Patch 11 validates the previous patch. Patch 12 avoids the PM to send multiple SUB_CLOSED events for the initial subflow. A fix for v5.12. Patch 13 validates the previous patch. Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it in order to re-create the initial subflow if it has been closed, even if the limit for *new* addresses -- not taking into account the address of the initial subflow -- has been reached. A fix for v5.10. Patch 15 validates the previous patch. Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> --- Matthieu Baerts (NGI0) (15): mptcp: pm: reuse ID 0 after delete and re-add mptcp: pm: fix RM_ADDR ID for the initial subflow selftests: mptcp: join: check removing ID 0 endpoint mptcp: pm: send ACK on an active subflow mptcp: pm: skip connecting to already established sf mptcp: pm: reset MPC endp ID when re-added selftests: mptcp: join: check re-adding init endp with != id selftests: mptcp: join: no extra msg if no counter mptcp: pm: do not remove already closed subflows mptcp: pm: fix ID 0 endp usage after multiple re-creations selftests: mptcp: join: check re-re-adding ID 0 endp mptcp: avoid duplicated SUB_CLOSED events selftests: mptcp: join: validate event numbers mptcp: pm: ADD_ADDR 0 is not a new address selftests: mptcp: join: check re-re-adding ID 0 signal net/mptcp/pm.c | 4 +- net/mptcp/pm_netlink.c | 87 ++++++++++---- net/mptcp/protocol.c | 6 + net/mptcp/protocol.h | 5 +- tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++---- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 + 6 files changed, 209 insertions(+), 50 deletions(-) --- base-commit: 3a0504d54b3b57f0d7bf3d9184a00c9f8887f6d7 change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817 Best regards, ==================== Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: check re-re-adding ID 0 signalMatthieu Baerts (NGI0)
This test extends "delete re-add signal" to validate the previous commit: when the 'signal' endpoint linked to the initial subflow (ID 0) is re-added multiple times, it will re-send the ADD_ADDR with id 0. The client should still be able to re-create this subflow, even if the add_addr_accepted limit has been reached as this special address is not considered as a new address. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: ADD_ADDR 0 is not a new addressMatthieu Baerts (NGI0)
The ADD_ADDR 0 with the address from the initial subflow should not be considered as a new address: this is not something new. If the host receives it, it simply means that the address is available again. When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider it as new by not incrementing the 'add_addr_accepted' counter. But the 'accept_addr' might not be set if the limit has already been reached: this can be bypassed in this case. But before, it is important to check that this ADD_ADDR for the ID 0 is for the same address as the initial subflow. If not, it is not something that should happen, and the ADD_ADDR can be ignored. Note that if an ADD_ADDR is received while there is already a subflow opened using the same address, this ADD_ADDR is ignored as well. It means that if multiple ADD_ADDR for ID 0 are received, there will not be any duplicated subflows created by the client. Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: validate event numbersMatthieu Baerts (NGI0)
This test extends "delete and re-add" and "delete re-add signal" to validate the previous commit: the number of MPTCP events are checked to make sure there are no duplicated or unexpected ones. A new helper has been introduced to easily check these events. The missing events have been added to the lib. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b911c97c7dc7 ("mptcp: add netlink event support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: avoid duplicated SUB_CLOSED eventsMatthieu Baerts (NGI0)
The initial subflow might have already been closed, but still in the connection list. When the worker is instructed to close the subflows that have been marked as closed, it might then try to close the initial subflow again. A consequence of that is that the SUB_CLOSED event can be seen twice: # ip mptcp endpoint 1.1.1.1 id 1 subflow dev eth0 2.2.2.2 id 2 subflow dev eth1 # ip mptcp monitor & [ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9 # ip mptcp endpoint delete id 1 [ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the second one from __mptcp_close_subflow(). To avoid doing the post-closed processing twice, the subflow is now marked as closed the first time. Note that it is not enough to check if we are dealing with the first subflow and check its sk_state: the subflow might have been reset or closed before calling mptcp_close_ssk(). Fixes: b911c97c7dc7 ("mptcp: add netlink event support") Cc: stable@vger.kernel.org Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: check re-re-adding ID 0 endpMatthieu Baerts (NGI0)
This test extends "delete and re-add" to validate the previous commit: when the endpoint linked to the initial subflow (ID 0) is re-added multiple times, it was no longer being used, because the internal linked counters are not decremented for this special endpoint: it is not an additional endpoint. Here, the "del/add id 0" steps are done 3 times to unsure this case is validated. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: fix ID 0 endp usage after multiple re-creationsMatthieu Baerts (NGI0)
'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once. Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512 Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com Cc: stable@vger.kernel.org Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29mptcp: pm: do not remove already closed subflowsMatthieu Baerts (NGI0)
It is possible to have in the list already closed subflows, e.g. the initial subflow has been already closed, but still in the list. No need to try to close it again, and increments the related counters again. Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: no extra msg if no counterMatthieu Baerts (NGI0)
The checksum and fail counters might not be available. Then no need to display an extra message with missing info. While at it, fix the indentation around, which is wrong since the same commit. Fixes: 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29selftests: mptcp: join: check re-adding init endp with != idMatthieu Baerts (NGI0)
The initial subflow has a special local ID: 0. It is specific per connection. When a global endpoint is deleted and re-added later, it can have a different ID, but the kernel should still use the ID 0 if it corresponds to the initial address. This test validates this behaviour: the endpoint linked to the initial subflow is removed, and re-added with a different ID. Note that removing the initial subflow will not decrement the 'subflows' counters, which corresponds to the *additional* subflows. On the other hand, when the same endpoint is re-added, it will increment this counter, as it will be seen as an additional subflow this time. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 20:13:29 +0000