| Age | Commit message (Collapse) | Author |
|---|
|
runtime is not used as seen with W=1 :
sound/core/compress_offload.c: In function ‘snd_compr_poll’:
sound/core/compress_offload.c:409:35: error: variable ‘runtime’ set but not used [-Werror=unused-but-set-variable]
409 | struct snd_compr_runtime *runtime;
| ^~~~~~~
Instead of dropping the runtime, use it in the function in place of
stream->runtime
Fixes: 04177158cf98 ("ALSA: compress_offload: introduce accel operation mode")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241106075312.15601-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
spurious interrupts
Running a L2 vCPU (see [1] for terminology) with LPCR_MER bit set and no
pending interrupts results in that L2 vCPU getting an infinite flood of
spurious interrupts. The 'if check' in kvmhv_run_single_vcpu() sets the
LPCR_MER bit if there are pending interrupts.
The spurious flood problem can be observed in 2 cases:
1. Crashing the guest while interrupt heavy workload is running
a. Start a L2 guest and run an interrupt heavy workload (eg: ipistorm)
b. While the workload is running, crash the guest (make sure kdump
is configured)
c. Any one of the vCPUs of the guest will start getting an infinite
flood of spurious interrupts.
2. Running LTP stress tests in multiple guests at the same time
a. Start 4 L2 guests.
b. Start running LTP stress tests on all 4 guests at same time.
c. In some time, any one/more of the vCPUs of any of the guests will
start getting an infinite flood of spurious interrupts.
The root cause of both the above issues is the same:
1. A NMI is sent to a running vCPU that has LPCR_MER bit set.
2. In the NMI path, all registers are refreshed, i.e, H_GUEST_GET_STATE
is called for all the registers.
3. When H_GUEST_GET_STATE is called for LPCR, the vcpu->arch.vcore->lpcr
of that vCPU at L1 level gets updated with LPCR_MER set to 1, and this
new value is always used whenever that vCPU runs, regardless of whether
there was a pending interrupt.
4. Since LPCR_MER is set, the vCPU in L2 always jumps to the external
interrupt handler, and this cycle never ends.
Fix the spurious flood by masking off the LPCR_MER bit before running a
L2 vCPU to ensure that it is not set if there are no pending interrupts.
[1] Terminology:
1. L0 : PAPR hypervisor running in HV mode
2. L1 : Linux guest (logical partition) running on top of L0
3. L2 : KVM guest running on top of L1
Fixes: ec0f6639fa88 ("KVM: PPC: Book3S HV nestedv2: Ensure LPCR_MER bit is passed to the L0")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-11-04 (ice, idpf, i40e, e1000e)
For ice:
Marcin adjusts ordering of calls in ice_eswitch_detach() to resolve a
use after free issue.
Mateusz corrects variable type for Flow Director queue to fix issues
related to drop actions.
For idpf:
Pavan resolves issues related to reset on idpf; avoiding use of freed
vport and correctly unrolling the mailbox task.
For i40e:
Aleksandr fixes a race condition involving addition and deletion of VF
MAC filters.
For e1000e:
Vitaly reverts workaround for Meteor Lake causing regressions in power
management flows.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Remove Meteor Lake SMBUS workarounds
i40e: fix race condition by adding filter's intermediate sync state
idpf: fix idpf_vc_core_init error path
idpf: avoid vport access in idpf_get_link_ksettings
ice: change q_index variable type to s16 to store -1 value
ice: Fix use after free during unload with ports in bridge
====================
Link: https://patch.msgid.link/20241104223639.2801097-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: pm: fix wrong perm and sock kfree
Two small fixes related to the MPTCP path-manager:
- Patch 1: remove an accidental restriction to admin users to list MPTCP
endpoints. A regression from v6.7.
- Patch 2: correctly use sock_kfree_s() instead of kfree() in the
userspace PM. A fix for another fix introduced in v6.4 and
backportable up to v5.19.
====================
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-0-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The local address entries on userspace_pm_local_addr_list are allocated
by sock_kmalloc().
It's then required to use sock_kfree_s() instead of kfree() to free
these entries in order to adjust the allocated size on the sk side.
Fixes: 24430f8bf516 ("mptcp: add address into userspace pm list")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-2-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the switch to YNL, the command to list all endpoints has been
accidentally restricted to users with admin permissions.
It looks like there are no reasons to have this restriction which makes
it harder for a user to quickly check if the endpoint list has been
correctly populated by an automated tool. Best to go back to the
previous behaviour then.
mptcp_pm_gen.c has been modified using ynl-gen-c.py:
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
The header file doesn't need to be regenerated.
Fixes: 1d0507f46843 ("net: mptcp: convert netlink from small_ops to ops")
Cc: stable@vger.kernel.org
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-1-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DP83848 datasheet (section 4.7.2) indicates that the reset pin should be
toggled after the clocks are running. Add the PHY_RST_AFTER_CLK_EN to
make sure that this indication is respected.
In my experience not having this flag enabled would lead to, on some
boots, the wrong MII mode being selected if the PHY was initialized on
the bootloader and was receiving data during Linux boot.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 34e45ad9378c ("net: phy: dp83848: Add TI DP83848 Ethernet PHY")
Link: https://patch.msgid.link/20241102151504.811306-1-paissilva@ld-100007.ds1.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
Taking advantage of previous patches in this series we move a number of
checks earlier in the code, simplifying things by moving the core of the
logic into a static internal function __mmap_region().
Doing this allows us to perform a number of checks up front before we do
any real work, and allows us to unwind the writable unmap check
unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE
validation unconditionally also.
We move a number of things here:
1. We preallocate memory for the iterator before we call the file-backed
memory hook, allowing us to exit early and avoid having to perform
complicated and error-prone close/free logic. We carefully free
iterator state on both success and error paths.
2. The enclosing mmap_region() function handles the mapping_map_writable()
logic early. Previously the logic had the mapping_map_writable() at the
point of mapping a newly allocated file-backed VMA, and a matching
mapping_unmap_writable() on success and error paths.
We now do this unconditionally if this is a file-backed, shared writable
mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however
doing so does not invalidate the seal check we just performed, and we in
any case always decrement the counter in the wrapper.
We perform a debug assert to ensure a driver does not attempt to do the
opposite.
3. We also move arch_validate_flags() up into the mmap_region()
function. This is only relevant on arm64 and sparc64, and the check is
only meaningful for SPARC with ADI enabled. We explicitly add a warning
for this arch if a driver invalidates this check, though the code ought
eventually to be fixed to eliminate the need for this.
With all of these measures in place, we no longer need to explicitly close
the VMA on error paths, as we place all checks which might fail prior to a
call to any driver mmap hook.
This eliminates an entire class of errors, makes the code easier to reason
about and more robust.
Link: https://lkml.kernel.org/r/6e0becb36d2f5472053ac5d544c0edfe9b899e25.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Refactor the map_deny_write_exec() to not unnecessarily require a VMA
parameter but rather to accept VMA flags parameters, which allows us to
use this function early in mmap_region() in a subsequent commit.
While we're here, we refactor the function to be more readable and add
some additional documentation.
Link: https://lkml.kernel.org/r/6be8bb59cd7c68006ebb006eb9d8dc27104b1f70.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Incorrect invocation of VMA callbacks when the VMA is no longer in a
consistent state is bug prone and risky to perform.
With regards to the important vm_ops->close() callback We have gone to
great lengths to try to track whether or not we ought to close VMAs.
Rather than doing so and risking making a mistake somewhere, instead
unconditionally close and reset vma->vm_ops to an empty dummy operations
set with a NULL .close operator.
We introduce a new function to do so - vma_close() - and simplify existing
vms logic which tracked whether we needed to close or not.
This simplifies the logic, avoids incorrect double-calling of the .close()
callback and allows us to update error paths to simply call vma_close()
unconditionally - making VMA closure idempotent.
Link: https://lkml.kernel.org/r/28e89dda96f68c505cb6f8e9fc9b57c3e9f74b42.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "fix error handling in mmap_region() and refactor
(hotfixes)", v4.
mmap_region() is somewhat terrifying, with spaghetti-like control flow and
numerous means by which issues can arise and incomplete state, memory
leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
The patches in this series comprise the minimal changes required to
resolve existing issues in mmap_region() error handling, in order that
they can be hotfixed and backported. There is additionally a follow up
series which goes further, separated out from the v1 series and sent and
updated separately.
This patch (of 5):
After an attempted mmap() fails, we are no longer in a situation where we
can safely interact with VMA hooks. This is currently not enforced,
meaning that we need complicated handling to ensure we do not incorrectly
call these hooks.
We can avoid the whole issue by treating the VMA as suspect the moment
that the file->f_ops->mmap() function reports an error by replacing
whatever VMA operations were installed with a dummy empty set of VMA
operations.
We do so through a new helper function internal to mm - mmap_file() -
which is both more logically named than the existing call_mmap() function
and correctly isolates handling of the vm_op reassignment to mm.
All the existing invocations of call_mmap() outside of mm are ultimately
nested within the call_mmap() from mm, which we now replace.
It is therefore safe to leave call_mmap() in place as a convenience
function (and to avoid churn). The invokers are:
ovl_file_operations -> mmap -> ovl_mmap() -> backing_file_mmap()
coda_file_operations -> mmap -> coda_file_mmap()
shm_file_operations -> shm_mmap()
shm_file_operations_huge -> shm_mmap()
dma_buf_fops -> dma_buf_mmap_internal -> i915_dmabuf_ops
-> i915_gem_dmabuf_mmap()
None of these callers interact with vm_ops or mappings in a problematic
way on error, quickly exiting out.
Link: https://lkml.kernel.org/r/cover.1730224667.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/d41fd763496fd0048a962f3fd9407dc72dd4fd86.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
Before fixing locking: rename misleading folio_undo_large_rmappable(),
which does not undo large_rmappable, to folio_unqueue_deferred_split(),
which is what it does. But that and its out-of-line __callee are mm
internals of very limited usability: add comment and WARN_ON_ONCEs to
check usage; and return a bool to say if a deferred split was unqueued,
which can then be used in WARN_ON_ONCEs around safety checks (sparing
callers the arcane conditionals in __folio_unqueue_deferred_split()).
Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all
of whose callers now call it beforehand (and if any forget then bad_page()
will tell) - except for its caller put_pages_list(), which itself no
longer has any callers (and will be deleted separately).
Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0
without checking and unqueueing a THP folio from deferred split list;
which is unfortunate, since the split_queue_lock depends on the memcg
(when memcg is enabled); so swapout has been unqueueing such THPs later,
when freeing the folio, using the pgdat's lock instead: potentially
corrupting the memcg's list. __remove_mapping() has frozen refcount to 0
here, so no problem with calling folio_unqueue_deferred_split() before
resetting memcg_data.
That goes back to 5.4 commit 87eaceb3faa5 ("mm: thp: make deferred split
shrinker memcg aware"): which included a check on swapcache before adding
to deferred queue, but no check on deferred queue before adding THP to
swapcache. That worked fine with the usual sequence of events in reclaim
(though there were a couple of rare ways in which a THP on deferred queue
could have been swapped out), but 6.12 commit dafff3f4c850 ("mm: split
underused THPs") avoids splitting underused THPs in reclaim, which makes
swapcache THPs on deferred queue commonplace.
Keep the check on swapcache before adding to deferred queue? Yes: it is
no longer essential, but preserves the existing behaviour, and is likely
to be a worthwhile optimization (vmstat showed much more traffic on the
queue under swapping load if the check was removed); update its comment.
Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing
folio->memcg_data without checking and unqueueing a THP folio from the
deferred list, sometimes corrupting "from" memcg's list, like swapout.
Refcount is non-zero here, so folio_unqueue_deferred_split() can only be
used in a WARN_ON_ONCE to validate the fix, which must be done earlier:
mem_cgroup_move_charge_pte_range() first try to split the THP (splitting
of course unqueues), or skip it if that fails. Not ideal, but moving
charge has been requested, and khugepaged should repair the THP later:
nobody wants new custom unqueueing code just for this deprecated case.
The 87eaceb3faa5 commit did have the code to move from one deferred list
to another (but was not conscious of its unsafety while refcount non-0);
but that was removed by 5.6 commit fac0516b5534 ("mm: thp: don't need care
deferred split queue in memcg charge move path"), which argued that the
existence of a PMD mapping guarantees that the THP cannot be on a deferred
list. As above, false in rare cases, and now commonly false.
Backport to 6.11 should be straightforward. Earlier backports must take
care that other _deferred_list fixes and dependencies are included. There
is not a strong case for backports, but they can fix cornercases.
Link: https://lkml.kernel.org/r/8dc111ae-f6db-2da7-b25c-7a20b1effe3b@google.com
Fixes: 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware")
Fixes: dafff3f4c850 ("mm: split underused THPs")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
The new unlocked list_del_init() in deferred_split_scan() is buggy. I
gave bad advice, it looks plausible since that's a local on-stack list,
but the fact is that it can race with a third party freeing or migrating
the preceding folio (properly unqueueing it with refcount 0 while holding
split_queue_lock), thereby corrupting the list linkage.
The obvious answer would be to take split_queue_lock there: but it has a
long history of contention, so I'm reluctant to add to that. Instead,
make sure that there is always one safe (raised refcount) folio before, by
delaying its folio_put(). (And of course I was wrong to suggest updating
split_queue_len without the lock: leave that until the splice.)
And remove two over-eager partially_mapped checks, restoring those tests
to how they were before: if uncharge_folio() or free_tail_page_prepare()
finds _deferred_list non-empty, it's in trouble whether or not that folio
is partially_mapped (and the flag was already cleared in the latter case).
Link: https://lkml.kernel.org/r/81e34a8b-113a-0701-740e-2135c97eb1d7@google.com
Fixes: dafff3f4c850 ("mm: split underused THPs")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The exec queue timestamp is only really useful when it's being queried
through the fdinfo. There's no need to update it so often, on every
job_free. Tracing a simple app like vkcube running shows an update
rate of ~ 120Hz. In case of discrete, the BO is on vram, creating a lot
of pcie transactions.
The update on job_free() is used to cover a gap: if exec
queue is created and destroyed rapidly, before a new query, the
timestamp still needs to be accumulated and accounted for in the xef.
Initial implementation in commit 6109f24f87d7 ("drm/xe: Add helper to
accumulate exec queue runtime") couldn't do it on the exec_queue_fini
since the xef could be gone at that point. However since commit
ce8c161cbad4 ("drm/xe: Add ref counting for xe_file") the xef is
refcounted and the exec queue always holds a reference, making this safe
now.
Improve the fix in commit 2149ded63079 ("drm/xe: Fix use after free when
client stats are captured") by reducing the frequency in which the
update is needed.
Fixes: 2149ded63079 ("drm/xe: Fix use after free when client stats are captured")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 83db047d9425d9a649f01573797558eff0f632e1)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
In unlikely event that we fail during sending the new VF GGTT
configuration to the GuC, we will free only the GGTT node data
struct but will miss to release the actual GGTT allocation.
This will later lead to list corruption, GGTT space leak and
finally risking crash when unloading the driver:
[ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-EIO)
[ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT
[ ] list_add corruption. next->prev should be prev (ffff88813cfcd628), but was 0000000000000000. (next=ffff88813cfe2028).
[ ] RIP: 0010:__list_add_valid_or_report+0x6b/0xb0
[ ] Call Trace:
[ ] drm_mm_insert_node_in_range+0x2c0/0x4e0
[ ] xe_ggtt_node_insert+0x46/0x70 [xe]
[ ] pf_provision_vf_ggtt+0x7f5/0xa70 [xe]
[ ] xe_gt_sriov_pf_config_set_ggtt+0x5e/0x770 [xe]
[ ] ggtt_set+0x4b/0x70 [xe]
[ ] simple_attr_write_xsigned.constprop.0.isra.0+0xb0/0x110
[ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-ENOSPC)
[ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT
[ ] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP NOPTI
[ ] RIP: 0010:drm_mm_remove_node+0x1b7/0x390
[ ] Call Trace:
[ ] <TASK>
[ ] ? die_addr+0x2e/0x80
[ ] ? exc_general_protection+0x1a1/0x3e0
[ ] ? asm_exc_general_protection+0x22/0x30
[ ] ? drm_mm_remove_node+0x1b7/0x390
[ ] ggtt_node_remove+0xa5/0xf0 [xe]
[ ] xe_ggtt_node_remove+0x35/0x70 [xe]
[ ] xe_ttm_bo_destroy+0x123/0x220 [xe]
[ ] intel_user_framebuffer_destroy+0x44/0x70 [xe]
[ ] intel_plane_destroy_state+0x3b/0xc0 [xe]
[ ] drm_atomic_state_default_clear+0x1cd/0x2f0
[ ] intel_atomic_state_clear+0x9/0x20 [xe]
[ ] __drm_atomic_state_free+0x1d/0xb0
Fix that by using pf_release_ggtt() on the error path, which now
works regardless if the node has GGTT allocation or not.
Fixes: 34e804220f69 ("drm/xe: Make xe_ggtt_node struct independent")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104144901.1903-1-michal.wajdeczko@intel.com
(cherry picked from commit 43b1dd2b550f0861ce80fbfffd5881b1b26272b1)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Upon failure all locks need to be dropped before returning to the user.
Fixes: 58480c1c912f ("drm/xe: Skip VMAs pin when requesting signal to the last XE_EXEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105043524.4062774-3-matthew.brost@intel.com
(cherry picked from commit 7d1a4258e602ffdce529f56686925034c1b3b095)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
In a couple of places after an exec queue is looked up the exec IOCTL
returns on input errors without dropping the exec queue ref. Fix this
ensuring the exec queue ref is dropped on input error.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105043524.4062774-2-matthew.brost@intel.com
(cherry picked from commit 07064a200b40ac2195cb6b7b779897d9377e5e6f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-fixes
Pull Qualcomm clk driver fixes from Bjorn Andersson:
- Correct flags for X Elite USB MP GDSC and pcie pipediv2 clocks
- Fix alpha PLL post_div mask for the cases where width is not
specified
- Avoid hangs in the SM8350 video driver (venus) by setting HW_CTRL
trigger feature on the video clocks
* tag 'qcom-clk-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: gcc-x1e80100: Fix USB MP SS1 PHY GDSC pwrsts flags
clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks
clk: qcom: clk-alpha-pll: Fix pll post div mask when width is not set
clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
|
|
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88081 property to support the aw88081 chip.
The driver is for amplifiers aw88081 of Awinic Technology
Corporation. The awinic AW88081 is an I2S/TDM input,
high efficiency digital Smart K audio amplifier
|
|
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series refactors the SoundWire dai link init logic for Intel
and AMD generic SoundWire machine driver and also updates the stream_name
in dai_links structure.
Link: https://github.com/thesofproject/linux/pull/5218
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
rtd has own ID, but it is naming "num" for it. The naming is confusable.
This patch rename it to "id".
And many functions request both "rtd" and its "id" as function parameter,
but rtd itself has rtd->id. This patch cleanup it.
And, Qcom driver want to use irregular rtd ID because of its topology,
and thus, soc-core need irregular calculation. I'm not sure why only Qcom
needs such calculation, but this patch also cleanup it.
But I guess we want to cleanup is not soc-core but Qcom side (?)
|
|
The ES8326 audio codec has one interrupt pin for headset detection
according to the datasheet. Document that in the binding.
This fixes dtbs_check error:
'interrupts-extended' does not match any of the regexes:
'pinctrl-[0-9]+'
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241105091910.3984381-1-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change interrupt mask from XU to GE to fix jack detection
interrupt issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/cbc81e324673467a96b70e4e219766b5@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On some MediaTek SoCs, an Audio DSP (ADSP) is integrated as a separate
hardware block that leverages Sound Open Firmware (SOF) and provides
additional audio functionalities. This hardware is optional, and the
audio subsystem will still function normally when it's not present.
To enable ADSP support, a 'mediatek,adsp' property is required in the
sound card node to pass the ADSP phandle. This allows AFE to link to
ADSP when the sound card is probed.
MT8188 has ADSP integrated, so add the 'mediatek,adsp' property to
allow using it in the audio subsystem.
This fixes dtbs_check error:
Unevaluated properties are not allowed ('mediatek,adsp' was
unexpected)
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241105091246.3944946-1-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add missing quirks for some new Dell laptops using cs42l43's speaker
outputs.
Signed-off-by: Deep Harsora <deep_harsora@dell.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241105111057.182076-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch changed the interrupt mask from XU to GE.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20241105100557.1987917-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
kmem_buckets_create
Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment
if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64.
However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16.
This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16],
resulting in kmem_buckets_create() attempting to create a kmem_cache for
size 16 twice. This duplication triggers warnings on boot:
[ 2.325108] ------------[ cut here ]------------
[ 2.325135] kmem_cache of name 'memdup_user-16' already exists
[ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0
[ 2.327957] Modules linked in:
[ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12
[ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024
[ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0
[ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0
[ 2.328942] sp : ffff800083d6fc50
[ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598
[ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000
[ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388
[ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030
[ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120
[ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000
[ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 2.329291] Call trace:
[ 2.329407] __kmem_cache_create_args+0xb8/0x3b0
[ 2.329499] kmem_buckets_create+0xfc/0x320
[ 2.329526] init_user_buckets+0x34/0x78
[ 2.329540] do_one_initcall+0x64/0x3c8
[ 2.329550] kernel_init_freeable+0x26c/0x578
[ 2.329562] kernel_init+0x3c/0x258
[ 2.329574] ret_from_fork+0x10/0x20
[ 2.329698] ---[ end trace 0000000000000000 ]---
[ 2.403704] ------------[ cut here ]------------
[ 2.404716] kmem_cache of name 'msg_msg-16' already exists
[ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0
[ 2.404842] Modules linked in:
[ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12
[ 2.405026] Tainted: [W]=WARN
[ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024
[ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0
[ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0
[ 2.405111] sp : ffff800083d6fc50
[ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598
[ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000
[ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388
[ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030
[ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120
[ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000
[ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 2.405287] Call trace:
[ 2.405293] __kmem_cache_create_args+0xb8/0x3b0
[ 2.405305] kmem_buckets_create+0xfc/0x320
[ 2.405315] init_msg_buckets+0x34/0x78
[ 2.405326] do_one_initcall+0x64/0x3c8
[ 2.405337] kernel_init_freeable+0x26c/0x578
[ 2.405348] kernel_init+0x3c/0x258
[ 2.405360] ret_from_fork+0x10/0x20
[ 2.405370] ---[ end trace 0000000000000000 ]---
To address this, alias kmem_cache for sizes smaller than min alignment
to the aligned sized kmem_cache, as done with the default system kmalloc
bucket.
Fixes: b32801d1255b ("mm/slab: Introduce kmem_buckets_create() and family")
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not
null. So the release of the dma channel leads to the following issue:
[ 4.879000] st,stm32-spdifrx 500d0000.audio-controller:
dma_request_slave_channel error -19
[ 4.888975] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000003d
[...]
[ 5.096577] Call trace:
[ 5.099099] dma_release_channel+0x24/0x100
[ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx]
[ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx]
To avoid this issue, release channel only if the pointer is valid.
Fixes: 794df9448edb ("ASoC: stm32: spdifrx: manage rebind issue")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241105140242.527279-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Avoid a possible buffer overflow if size is larger than 4K.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f5d873f5825b40d886d03bd2aede91d4cf002434)
Cc: stable@vger.kernel.org
|
|
Users should not be able to run these.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ba9395430f611cfc101b1c2687732baafa239d5)
Cc: stable@vger.kernel.org
|
|
Regular users shouldn't have read access.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c0cfd2e652553d607b910be47d0cc5a7f3a78641)
Cc: stable@vger.kernel.org
|
|
For DPX mode, the number of memory partitions supported should be less
than or equal to 2.
Fixes: 1589c82a1085 ("drm/amdgpu: Check memory ranges for valid xcp mode")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 990c4f580742de7bb78fa57420ffd182fc3ab4cd)
Cc: stable@vger.kernel.org
|
|
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Fixes to multi queue RX feature
On J7 platforms, setting up multiple RX flows was failing
as the RX free descriptor ring 0 is shared among all flows
and we did not allocate enough elements in the RX free descriptor
ring 0 to accommodate for all RX flows. Patch 1 fixes this.
The second patch fixes a warning if there was any error in
am65_cpsw_nuss_init_rx_chns() and am65_cpsw_nuss_cleanup_rx_chns()
was called after that.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
====================
Link: https://patch.msgid.link/20241101-am65-cpsw-multi-rx-j7-fix-v3-0-338fdd6a55da@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
flow->irq is initialized to 0 which is a valid IRQ. Set it to -EINVAL
in error path of am65_cpsw_nuss_init_rx_chns() so we do not try
to free an unallocated IRQ in am65_cpsw_nuss_remove_rx_chns().
If user tried to change number of RX queues and am65_cpsw_nuss_init_rx_chns()
failed due to any reason, the warning will happen if user tries to change
the number of RX queues after the error condition.
root@am62xx-evm:~# ethtool -L eth0 rx 3
[ 40.385293] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[ 40.393211] am65-cpsw-nuss 8000000.ethernet: Failed to init rx flow2
netlink error: Invalid argument
root@am62xx-evm:~# ethtool -L eth0 rx 2
[ 82.306427] ------------[ cut here ]------------
[ 82.311075] WARNING: CPU: 0 PID: 378 at kernel/irq/devres.c:144 devm_free_irq+0x84/0x90
[ 82.469770] Call trace:
[ 82.472208] devm_free_irq+0x84/0x90
[ 82.475777] am65_cpsw_nuss_remove_rx_chns+0x6c/0xac [ti_am65_cpsw_nuss]
[ 82.482487] am65_cpsw_nuss_update_tx_rx_chns+0x2c/0x9c [ti_am65_cpsw_nuss]
[ 82.489442] am65_cpsw_set_channels+0x30/0x4c [ti_am65_cpsw_nuss]
[ 82.495531] ethnl_set_channels+0x224/0x2dc
[ 82.499713] ethnl_default_set_doit+0xb8/0x1b8
[ 82.504149] genl_family_rcv_msg_doit+0xc0/0x124
[ 82.508757] genl_rcv_msg+0x1f0/0x284
[ 82.512409] netlink_rcv_skb+0x58/0x130
[ 82.516239] genl_rcv+0x38/0x50
[ 82.519374] netlink_unicast+0x1d0/0x2b0
[ 82.523289] netlink_sendmsg+0x180/0x3c4
[ 82.527205] __sys_sendto+0xe4/0x158
[ 82.530779] __arm64_sys_sendto+0x28/0x38
[ 82.534782] invoke_syscall+0x44/0x100
[ 82.538526] el0_svc_common.constprop.0+0xc0/0xe0
[ 82.543221] do_el0_svc+0x1c/0x28
[ 82.546528] el0_svc+0x28/0x98
[ 82.549578] el0t_64_sync_handler+0xc0/0xc4
[ 82.553752] el0t_64_sync+0x190/0x194
[ 82.557407] ---[ end trace 0000000000000000 ]---
Fixes: da70d184a8c3 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On J7 platforms, setting up multiple RX flows was failing
as the RX free descriptor ring 0 is shared among all flows
and we did not allocate enough elements in the RX free descriptor
ring 0 to accommodate for all RX flows.
This issue is not present on AM62 as separate pair of
rings are used for free and completion rings for each flow.
Fix this by allocating enough elements for RX free descriptor
ring 0.
However, we can no longer rely on desc_idx (descriptor based
offsets) to identify the pages in the respective flows as
free descriptor ring includes elements for all flows.
To solve this, introduce a new swdata data structure to store
flow_id and page. This can be used to identify which flow (page_pool)
and page the descriptor belonged to when popped out of the
RX rings.
Fixes: da70d184a8c3 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rick reported that his Pluggable USB4 dock does not work anymore after
upgrading to v6.10 kernel.
It looks like commit c6ca1ac9f472 ("thunderbolt: Increase sideband
access polling delay") makes the device router enumeration happen later
than what might be expected by the dock (although there is no such limit
in the USB4 spec) which probably makes it assume there is something
wrong with the high-speed link and reset it. After the link is reset the
same issue happens again and again.
For this reason lower the sideband access delay from 5ms to 1ms. This
seems to work fine according to Rick's testing.
Reported-by: Rick Lahaye <rick@581238.xyz>
Closes: https://lore.kernel.org/linux-usb/000f01db247b$d10e1520$732a3f60$@581238.xyz/
Tested-by: Rick Lahaye <rick@581238.xyz>
Fixes: c6ca1ac9f472 ("thunderbolt: Increase sideband access polling delay")
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
If dev_get_regmap() fails, it returns NULL pointer not ERR_PTR(),
replace IS_ERR() with NULL pointer check, and return -ENODEV.
Fixes: d0f8e97866bf ("i2c: muxes: add support for tsd,mule-i2c multiplexer")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
ALSA SoC Sound has Generic Sound Card (Simple-Card, Audio-Graph-Card,
Audio-Graph-Card2). Adds its Maintainer.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikt2a41c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "*cmd" variable can be controlled by the user via debugfs. That means
"new_cam" can be as high as 255 while the size of the uc->updated[] array
is UCSI_MAX_ALTMODES (30).
The call tree is:
ucsi_cmd() // val comes from simple_attr_write_xsigned()
-> ucsi_send_command()
-> ucsi_send_command_common()
-> ucsi_run_command() // calls ucsi->ops->sync_control()
-> ucsi_ccg_sync_control()
Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/325102b3-eaa8-4918-a947-22aca1146586@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the device was already runtime suspended then during system suspend
we cannot access the device registers else it will crash.
Also we cannot access any registers after dwc3_core_exit() on some
platforms so move the dwc3_enable_susphy() call to the top.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: William McVicker <willmcvicker@google.com>
Closes: https://lore.kernel.org/all/ZyVfcUuPq56R2m1Y@google.com
Fixes: 705e3ce37bcc ("usb: dwc3: core: Fix system suspend on TI AM62 platforms")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241104-am62-lpm-usb-fix-v1-1-e93df73a4f0d@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and
txbuf_len are uninitialized. This commit stops to print uninitialized
value and misleading/false data.
Cc: stable@vger.kernel.org
Fixes: a4422ff22142 (" usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Signed-off-by: Rex Nie <rex.nie@jaguarmicro.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241030133632.2116-1-rex.nie@jaguarmicro.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ESAI of i.MX8QM is the same as i.MX6ULL. So allow fsl,imx8qm-esai
fallback to fsl,imx6ull-esai.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241028-esai_fix-v1-1-3c1432a5613c@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add OF device ID entry for SM8750 sound card with its own model name,
used to load proper Audioreach topology file. The sound card is
compatible with SM8450 and newer family.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241101165159.370619-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for SM8750 sound card, compatible with older SM8450
variant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241101165159.370619-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the Spreadtrum Multi-Channel Data Transfer controller bindings
to DT schema. Adjust filename to match compatible.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/140ee384c1c351ffa3abefa8dd3246d1625dda8d.1730310275.git.stano.jakubek@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the Spreadtrum DMA platform bindings to DT schema.
Adjust filename to match compatible.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/9fc646b70a73e7a6c513771d69b0edcd140f09d7.1730310275.git.stano.jakubek@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On i.MX95, the MQS module in Always-on (AON) domain only can
be accessed by System Controller Management Interface (SCMI)
MISC Protocol. So define a specific regmap_config for the case.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20241025062935.1071408-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix an issue detected by the Smatch tool:
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_1'.
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_2'.
These errors were triggered because the variables 'val_1' and 'val_2'
could remain uninitialized if 'offlevel' is zero, meaning the loop
that assigns values to them does not execute. In this case,
'dma_addr_next' would use uninitialized data, potentially leading
to undefined behavior.
To resolve this, a conditional update for 'dma_addr_next' is added,
ensuring it is assigned only when 'val_1' and 'val_2' are read.
A new boolean variable 'val_read' flags when the values have been
retrieved, setting 'dma_addr_next' only if valid data is available.
This solution prevents the use of uninitialized data, maintaining
defined behavior for 'dma_addr_next' in all cases, and aligns with
expected usage of I2S RX descriptor data.
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241102123630.25446-1-surajsonawane0215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
An atomicity violation occurs when the validity of the variables
da7219->clk_src and da7219->mclk_rate is being assessed. Since the entire
assessment is not protected by a lock, the da7219 variable might still be
in flux during the assessment, rendering this check invalid.
To fix this issue, we recommend adding a lock before the block
if ((da7219->clk_src == clk_id) && (da7219->mclk_rate == freq)) so that
the legitimacy check for da7219->clk_src and da7219->mclk_rate is
protected by the lock, ensuring the validity of the check.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: 6d817c0e9fd7 ("ASoC: codecs: Add da7219 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Link: https://patch.msgid.link/20240930101216.23723-1-chenqiuji666@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
