| Age | Commit message (Collapse) | Author |
|---|
|
Add a new schema which extends opp-v2 to support a new vendor specific
property required for Adreno GPUs found in Qualcomm's SoCs. The new
property called "qcom,opp-acd-level" carries a u32 value recommended
for each opp needs to be shared to GMU during runtime.
Also, update MAINTAINERS file include the new opp-v2-qcom-adreno.yaml.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649351/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add a module param to disable ACD which will help to quickly rule it
out for any GPU issues.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/649349/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Fix the following for qmp_get() errors:
1. Correctly handle probe defer for A6x GPUs
2. Ignore other errors because those are okay when GPU ACD is
not required. They are checked again during gpu acd probe.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Patchwork: https://patchwork.freedesktop.org/patch/649346/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
When ACD feature is enabled, it triggers some internal calibrations
which result in a pretty long delay during the first HFI perf vote.
So, increase the HFI response timeout to match the downstream driver.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Patchwork: https://patchwork.freedesktop.org/patch/649344/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce
the power consumption. In some chipsets, it is also a requirement to
support higher GPU frequencies. This patch adds support for GPU ACD by
sending necessary data to GMU and AOSS. The feature support for the
chipset is detected based on devicetree data.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/649342/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Really the only purpose of this was to limit the address space size to
4GB to avoid 32b rollover problems in 64b pointer math in older sqe fw.
So replace the address_space_size with a quirk limiting the address
space to 4GB. In all other cases, use the SMMU input address size (IAS)
to determine the address space size.
v2: Properly account for vm_start
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/649467/
|
|
If the GMU takes too long to respond to an HFI message, we may return
early. If the GMU does eventually respond, and then we send a second
message, we will see the response for the first, throw another error,
and keep going. But we don't currently wait for the interrupt from the
GMU again, so if the second response isn't there immediately we may
prematurely return. This can cause a continuous cycle of missed HFI
messages, and for reasons I don't quite understand the GMU does not shut
down properly when this happens.
Fix this by waiting for the GMU interrupt when we see an empty queue. If
the GMU never responds then the queue really is empty and we quit. We
can't wait for the interrupt when we see a wrong response seqnum because
the GMU might have already queued both responses by the time we clear
the interrupt the first time so we do need to check the queue before
waiting on the interrupt again.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650013/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
There is a small chance that the GPU is already hot during boot. In that
case, the call to of_devfreq_cooling_register() will immediately try to
apply devfreq cooling, as seen in the following crash:
Unable to handle kernel paging request at virtual address 0000000000014110
pc : a6xx_gpu_busy+0x1c/0x58 [msm]
lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm]
Call trace:
a6xx_gpu_busy+0x1c/0x58 [msm] (P)
devfreq_simple_ondemand_func+0x3c/0x150
devfreq_update_target+0x44/0xd8
qos_max_notifier_call+0x30/0x84
blocking_notifier_call_chain+0x6c/0xa0
pm_qos_update_target+0xd0/0x110
freq_qos_apply+0x3c/0x74
apply_constraint+0x88/0x148
__dev_pm_qos_update_request+0x7c/0xcc
dev_pm_qos_update_request+0x38/0x5c
devfreq_cooling_set_cur_state+0x98/0xf0
__thermal_cdev_update+0x64/0xb4
thermal_cdev_update+0x4c/0x58
step_wise_manage+0x1f0/0x318
__thermal_zone_device_update+0x278/0x424
__thermal_cooling_device_register+0x2bc/0x308
thermal_of_cooling_device_register+0x10/0x1c
of_devfreq_cooling_register_power+0x240/0x2bc
of_devfreq_cooling_register+0x14/0x20
msm_devfreq_init+0xc4/0x1a0 [msm]
msm_gpu_init+0x304/0x574 [msm]
adreno_gpu_init+0x1c4/0x2e0 [msm]
a6xx_gpu_init+0x5c8/0x9c8 [msm]
adreno_bind+0x2a8/0x33c [msm]
...
At this point we haven't initialized the GMU at all yet, so we cannot read
the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before
in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in
6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but
unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag
accordingly. This means the df->suspended flag does not match the actual
devfreq state after initialization and msm_devfreq_get_dev_status() will
end up accessing GMU registers, causing the crash.
Fix this by setting df->suspended correctly during initialization.
Cc: stable@vger.kernel.org
Fixes: 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650772/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The current s3cp implementation does not work anymore after the
migration, and instead of fixing it and propagating the fix down to us,
it's simpler to directly use curl. Uprev mesa [1][2] to adapt these
changes. Also replace broken s3cp command with a curl wrapper call in
drm-ci.
[1] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34120
[2] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34244
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Patchwork: https://patchwork.freedesktop.org/patch/645597/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add DSI Controller v2.5.1 support for SA8775P SoC.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/651433/
Link: https://lore.kernel.org/r/20250424062431.2040692-6-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The SA8775P SoC uses the 5nm (v4.2) DSI PHY driver with
different enable regulator load.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/649842/
Link: https://lore.kernel.org/r/20250424062431.2040692-5-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Document DSI controller and phy on SA8775P platform.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649839/
Link: https://lore.kernel.org/r/20250424062431.2040692-4-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Document the DSI CTRL on the SA8775P Platform.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649855/
Link: https://lore.kernel.org/r/20250424062431.2040692-3-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Document the DSI PHY on the SA8775P Platform.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649838/
Link: https://lore.kernel.org/r/20250424062431.2040692-2-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
There's a separate path that allows register access from CPUSS.
Describe it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/641464/
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-2-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The MSM DisplayPort driver implements several HDMI codec functions
in the driver, e.g. it manually manages HDMI codec device registration,
returning ELD and plugged_cb support. In order to reduce code
duplication reuse drm_hdmi_audio_* helpers and drm_bridge_connector
integration.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/649728/
Link: https://lore.kernel.org/r/20250423-dp-hdmi-audio-v7-1-8407a23e55b2@oss.qualcomm.com
|
|
The SDM630 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask, replacing PINGPONG_SDM845_MASK with
BIT(DPU_PINGPONG_DITHER).
Fixes: 7204df5e7e68 ("drm/msm/dpu: add support for SDM660 and SDM630 platforms")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640308/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-5-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Neither DPU driver nor vendor SDE driver do not use TE2 definitions
(and, in case of SDE driver, never did). Semantics of the TE2 feature
bit and .te2 sblk are not completely clear. Drop these bits from the
catalog with the possibility of reintroducing them later if we need to
support ppsplit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640305/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-4-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The MSM8953 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask and, as it is the only remaining bit,
drop the .features assignment completely.
Fixes: 7a6109ce1c2c ("drm/msm/dpu: Add support for MSM8953")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640303/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-3-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The MSM8917 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask and, as it is the only remaining bit,
drop the .features assignment completely.
Fixes: 62af6e1cb596 ("drm/msm/dpu: Add support for MSM8917")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640301/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-2-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The MSM8937 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask and, as it is the only remaining bit,
drop the .features assignment completely.
Fixes: c079680bb0fa ("drm/msm/dpu: Add support for MSM8937")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/640299/
Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-1-498271be8b50@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Use new drm_hdmi_acr_get_n_cts() helper instead of hand-coding the
tables. Instead of storing the rate 'index', store the audio sample rate
in hdmi->audio.rate, removing the need for even more defines.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/647507/
Link: https://lore.kernel.org/r/20250408-drm-hdmi-acr-v2-3-dee7298ab1af@oss.qualcomm.com
|
|
There is a duplication between msm_hdmi_audio_update() calls in
msm_hdmi_set_timings() and msm_hdmi_bridge_atomic_pre_enable(). Merge
those two calls to be performed unconditionally at
msm_hdmi_bridge_atomic_pre_enable().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/647505/
Link: https://lore.kernel.org/r/20250408-drm-hdmi-acr-v2-2-dee7298ab1af@oss.qualcomm.com
|
|
Add DPU driver support for the Qualcomm SAR2130P platform. It is mostly
the same as SM8550, minor differences in the CDP configuration.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/649258/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-8-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Qualcomm SAR2130P requires slightly different setup for the DSI PHY. It
is a 5nm PHY (like SM8450), so supplies are the same, but the rest of
the configuration is the same as SM8550 DSI PHY.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/649257/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-7-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add compatible and device configuration for the Qualcomm SAR2130P
platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/649256/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-6-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Describe the Mobile Display SubSystem (MDSS) device present on the
Qualcomm SAR2130P platform. It looks pretty close to SM8550 on the
system level. SAR2130P features two DSI hosts and single DisplayPort
controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649265/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-5-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Describe DPU controller present on Qualcomm SAR2130P platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649254/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-4-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Describe MIPI DSI PHY present on Qualcomm SAR2130P platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649252/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-3-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Describe MIPI DSI controller present on Qualcomm SAR2130P platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649250/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-2-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Describe DisplayPort controller present on Qualcomm SAR2130P platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649263/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-1-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
It is easy to skip or ignore the fact that the default SSPP feature
masks for SDM845+ don't include the SmartDMA bit (both during
development and during the review stage). Rename SSPP feature masks to
make it more explicit that using non-SmartDMA masks should not be an
exception rather than the rule.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/650425/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-5-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
In order to support more versatile configuration of the display pipes on
SM8550, enable SmartDMA for this platform.
Patchwork: https://patchwork.freedesktop.org/patch/650424/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-4-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
In order to support more versatile configuration of the display pipes on
SC8280XP, enable SmartDMA for this platform.
Patchwork: https://patchwork.freedesktop.org/patch/650420/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-3-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Reworking of the catalog dropped the SmartDMA feature bit on the SC8180X
platform. Renable SmartDMA support on this SoC.
Fixes: 460c410f02e4 ("drm/msm/dpu: duplicate sdm845 catalog entries")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/650421/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-2-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Reworking of the catalog dropped the SmartDMA feature bit on the SM8150
platform. Renable SmartDMA support on this SoC.
Fixes: 460c410f02e4 ("drm/msm/dpu: duplicate sdm845 catalog entries")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/650418/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-1-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Since SmartDMA planes provide two rectangles, it is possible to use them
to drive two different DRM planes, first plane getting the rect_0,
another one using rect_1 of the same SSPP. The sharing algorithm is
pretty simple, it requires that each of the planes can be driven by the
single rectangle and only consecutive planes are considered.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/650441/
Link: https://lore.kernel.org/r/20250426-dpu-share-sspp-v7-1-6f4c719e373c@oss.qualcomm.com
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
|
|
LVDS support in MDP4 driver makes use of drm_connector directly. However
LCDC encoder and LVDS connector are wrappers around drm_panel. Switch
them to use drm_panel_bridge/drm_bridge_connector. This allows using
standard interface for the drm_panel and also inserting additional
bridges between encoder and panel.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/650290/
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-6-6b212160b44c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
We can check the LCDC clock directly from the LCDC encoder driver, so
remove it from the LVDS connector.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/650285/
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-5-6b212160b44c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Instead of using .parent_names, use .parent_data, which binds parent
clocks by using relative names specified in DT in addition to using global
system clock names.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650284/
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-4-6b212160b44c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The LVDS/LCDC controller uses pixel clock coming from the multimedia
controller (mmcc) rather than using the PLL directly. Stop using LVDS
PLL directly and register it as a clock provider. Use lcdc_clk as a
pixel clock for the LCDC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/650280/
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-3-6b212160b44c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Drop the !COMMON_CLK stub for mpd4_lvds_pll_init(), the DRM_MSM driver
depends on COMMON_CLK.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/650281/
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-2-6b212160b44c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add the LCDC / LVDS clock input and the XO used to drive internal LVDS
PLL to MDP4 controller bindings. The controller also provides LVDS PHY
PLL, so add optional #clock-cells to the device.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/650278/
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-1-6b212160b44c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Document two interconnect paths found on the MDSS on MSM8953.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/649391/
Link: https://lore.kernel.org/r/20250420-msm8953-interconnect-v2-1-828715dcb674@lucaweiss.eu
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/647875/
Link: https://lore.kernel.org/r/20250410025221.3358387-1-nichen@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Now as we have dropped the DPU_CTL_SPLIT_DISPLAY from DPU >= 5.0
configuration, drop the rm->has_legacy_ctl condition which short-cutted
the check for those platforms.
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/641586/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-8-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Since DPU 5.0 CTL blocks do not require DPU_CTL_SPLIT_DISPLAY, as single
CTL is used for both interfaces. As both RM and encoder now handle
active CTLs, drop that feature bit.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/641592/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-7-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Unlike previous generation, since DPU 5.0 it is possible to use just one
CTL to handle all INTF and WB blocks for a single output. And one has to
use single CTL to support bonded DSI config. Allocate single CTL for
these DPU versions.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/641587/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-6-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
In case of ACTIVE CTLs, a single CTL is being used for flushing all INTF
blocks. Don't skip programming the CTL on those targets.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/641585/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-5-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
On DPU >= 5.0 CTL blocks were reworked in order to support using a
single CTL for all outputs. In preparation of reworking the RM code to
return single CTL make sure that dpu_encoder can cope with that.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/641582/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-4-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
