Age | Commit message (Collapse) | Author |
|
Add support to Alienware Area-51m and Alienware m15 R5.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250710-m15_r5-v1-1-2c6ad44e5987@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The think-lmi driver uses the firwmare_attributes_class. But this class
is registered after think-lmi, causing the "think-lmi" directory in
"/sys/class/firmware-attributes" to be missing when the driver is
compiled as builtin.
Fixes: 55922403807a ("platform/x86: think-lmi: Directly use firmware_attributes_class")
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Link: https://lore.kernel.org/r/7dce5f7f-c348-4350-ac53-d14a8e1e8034@secunet.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Make sure to drop the OF node reference taken when creating the Gaokun
auxiliary devices when the devices are later released.
Fixes: 7636f090d02e ("platform: arm64: add Huawei Matebook E Go EC driver")
Cc: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250708085358.15657-1-johan@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Not all of Lenovo non-ThinkPad devices support both mic mute LED (on F4)
and audio mute LED (on F1). Some of them only support one mute LED, some
of them don't have any mute LEDs. If any of the mute LEDs is missing,
the driver reports error -5.
Check if the device supports a mute LED or not. Do not trigger error -5
message from missing a mute LED if it is not supported on the device.
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Suggested-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250709035716.36267-1-xy-jackie@139.com
[ij: major edits to the changelog.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On some models supported by ideapad-laptop, the HW/FW can remember the
state of keyboard backlight among boots. However, it is always turned
off while shutting down, as a side effect of the LED class device
unregistering sequence.
This is inconvenient for users who always prefer turning on the
keyboard backlight. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class
device so that the state of keyboard backlight gets remembered, which
also aligns with the behavior of manufacturer utilities on Windows.
Fixes: 503325f84bc0 ("platform/x86: ideapad-laptop: add keyboard backlight control support")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707163808.155876-3-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On devices supported by ideapad-laptop, the HW/FW can remember the
FnLock state among boots. However, since the introduction of the FnLock
LED class device, it is turned off while shutting down, as a side effect
of the LED class device unregistering sequence.
Many users always turn on FnLock because they use function keys much
more frequently than multimedia keys. The behavior change is
inconvenient for them. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class
device so that the FnLock state gets remembered, which also aligns with
the behavior of manufacturer utilities on Windows.
Fixes: 07f48f668fac ("platform/x86: ideapad-laptop: add FnLock LED class device")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707163808.155876-2-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
For setting the enable value, the input should be 0 or 1 only. Use
kstrtobool() in place of kstrtoint() in mlxbf_pmc_enable_store() to
accept only valid input.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/2ee618c59976bcf1379d5ddce2fc60ab5014b3a9.1751380187.git.shravankr@nvidia.com
[ij: split kstrbool() change to own commit.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Before programming the event info, validate the event number received as input
by checking if it exists in the event_list. Also fix a typo in the comment for
mlxbf_pmc_get_event_name() to correctly mention that it returns the event name
when taking the event number as input, and not the other way round.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/2ee618c59976bcf1379d5ddce2fc60ab5014b3a9.1751380187.git.shravankr@nvidia.com
[ij: split kstrbool() change to own commit.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since the input string passed via the command line appends a newline char,
it needs to be removed before comparison with the event_list.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/4978c18e33313b48fa2ae7f3aa6dbcfce40877e4.1751380187.git.shravankr@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Calling power_supply_get_property() inside
dell_wmi_ddv_battery_translate() can cause a deadlock since this
function is also being called from the power supply extension code,
in which case psy->extensions_sem is already being held.
Fix this by using the new power_supply_get_property_direct() function
to ignore any power supply extensions when retrieving the battery
serial number.
Tested on a Dell Inspiron 3505.
Reported-by: Hans de Goede <hansg@kernel.org>
Fixes: 058de163a376 ("platform/x86: dell-ddv: Implement the battery matching algorithm")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250627205124.250433-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Test that power supply extensions can access properties of their
power supply using power_supply_get_property_direct(). This both
ensures that the functionality works and serves as an example for
future driver developers.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250627205124.250433-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Power supply extensions might want to interact with the underlying
power supply to retrieve data like serial numbers, charging status
and more. However doing so causes psy->extensions_sem to be locked
twice, possibly causing a deadlock.
Provide special variants of power_supply_get/set_property() that
ignore any power supply extensions and thus do not touch the
associated psy->extensions_sem lock.
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250627205124.250433-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add missing empty member to `awcc_dmi_table`.
Cc: stable@vger.kernel.org
Fixes: 6d7f1b1a5db6 ("platform/x86: alienware-wmi: Split DMI table")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707-dmi-fix-v1-1-6730835d824d@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Many error paths in tlmi_sysfs_init() lead to sysfs groups being removed
when they were not even created.
Fix this by letting the kobject core manage these groups through their
kobj_type's defult_groups.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-3-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In tlmi_analyze(), allocated structs with an embedded kobject are freed
in error paths after the they were already initialized.
Fix this by first by avoiding the initialization of kobjects in
tlmi_analyze() and then by correctly cleaning them up in
tlmi_release_attr() using their kset's kobject list.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Fixes: 30e78435d3bf ("platform/x86: think-lmi: Split kobject_init() and kobject_add() calls")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-2-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Avoid entering tlmi_release_attr() in error paths if both ksets are not
yet created.
This is accomplished by initializing them side by side.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-1-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fixes a logic issue in mlxreg_lc_completion_notify() where the
intention was to check if MLXREG_LC_POWERED flag is not set before
powering on the device.
The original code used "state & ~MLXREG_LC_POWERED" to check for the
absence of the POWERED bit. However this condition evaluates to true
even when other bits are set, leading to potentially incorrect
behavior.
Corrected the logic to explicitly check for the absence of
MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED).
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250630105812.601014-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
loongarch and mips both support hardware that uses the i2c-piix4 driver.
It should not be restricted to x86, so drop the x86 dependency.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdVPQLjOox5sMp34Z5MTwKv2WOpHa=MpZr8hWG22fQKcjw@mail.gmail.com/
Fixes: 7e173eb82ae97175 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696a8 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82ae9717
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696a89 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add ACPI ID for Wildcat Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250617232913.3314765-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-3-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-2-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-1-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Existing swnode graph format is specific to sensor device
and is causing conflicts when accessing standard property
variables outside the sensor driver.
To address this issue, enhanced swnode graph format with
dedicated nodes for i2c and isp devices, with sensor node
added as child to i2c node. This approach allows to have
standard property variables (ex: 'clock-frequency') with
values applicable for each of the devices (sensor, i2c and
isp).
ACPI device driver_data handle is also initialized with root
camera swnode to access the property variables in the graph
in isp and i2c drivers.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250618202958.3934822-1-pratap.nirujogi@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
After retrieving WMI data blocks in sysfs callbacks, check for the
validity of them before dereferencing their content.
Reported-by: Jan Graczyk <jangraczyk@yahoo.ca>
Closes: https://lore.kernel.org/r/CAHk-=wgMiSKXf7SvQrfEnxVtmT=QVQPjJdNjfm3aXS7wc=rzTw@mail.gmail.com/
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-sysman-fix-v2-1-d185674d0a30@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Inform potential firmware developers that WExx ACPI methods are
always called by the WMI driver core even if the associated WMI event
is not marked as being expensive.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250619221440.6737-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It turns out that the Windows WMI-ACPI driver always enables/disables
WMI events regardless of whether they are marked as expensive or not.
This finding is further reinforced when reading the documentation of
the WMI_FUNCTION_CONTROL_CALLBACK callback used by Windows drivers
for enabling/disabling WMI devices:
The DpWmiFunctionControl routine enables or disables
notification of events, and enables or disables data
collection for data blocks that the driver registered
as expensive to collect.
Follow this behavior to fix the WMI event used for reporting hotkey
events on the Dell Latitude 5400 and likely many more devices.
Reported-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220246
Tested-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Fixes: 656f0961d126 ("platform/x86: wmi: Rework WCxx/WExx ACPI method handling")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250619221440.6737-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
change error log to use correct bus number from main_mux_devs
instead of cpld_devs.
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250622072921.4111552-2-alok.a.tiwari@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This commit corrects several minor typographical errors in comments
and error messages across multiple Mellanox platform driver.
Fixed spelling of "thresholds", "region", "platform", "default",
and removed redundant spaces in comment strings and error logs.
These changes are cosmetic and do not affect runtime behavior.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250622072921.4111552-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
same ID (103) was assigned to both GDC_BANK0_G_RSE_PIPE_CACHE_DATA0
and GDC_BANK0_G_RSE_PIPE_CACHE_DATA1. This could lead to incorrect
event mapping.
Updated the ID to 104 to ensure uniqueness.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250619060502.3594350-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
2025 Thinkpads F11 key launch the Intel Unison app on Windows,
which does some sort of smart sharing between laptop and phone.
Map this key event to KEY_LINK_PHONE as the closest thing we have.
This prevents an error message being displayed on key press.
Reported-by: Damjan Georgievski <gdamjan@gmail.com>
Closes: https://sourceforge.net/p/ibm-acpi/mailman/message/59189556/
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250620181119.2519546-1-mpearson-lenovo@squebb.ca
[ij: converted directory to pre-lenovo move as this is fixes material.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add a DMI quirk entry for the ASUS Zenbook Duo UX8406CA 2025 model to use
the existing zenbook duo keyboard quirk.
Signed-off-by: Rahul Chandra <rahul@chandra.net>
Link: https://lore.kernel.org/r/20250624073301.602070-1-rahul@chandra.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add 0x29 as the accelerometer address for the Dell Latitude 5500 to
lis3lv02d_devices[].
The address was verified as below:
$ cd /sys/bus/pci/drivers/i801_smbus/0000:00:1f.4
$ ls -d i2c-?
i2c-2
$ sudo modprobe i2c-dev
$ sudo i2cdetect 2
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-2.
I will probe address range 0x08-0x77.
Continue? [Y/n] Y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- --
30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- --
50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
$ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device
lis3lv02d 0x29
$ sudo dmesg
[ 0.000000] Linux version 6.12.32-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.32-1 (2025-06-07)
[…]
[ 0.000000] DMI: Dell Inc. Latitude 5500/0M14W7, BIOS 1.38.0 03/06/2025
[…]
[ 609.063488] i2c_dev: i2c /dev entries driver
[ 639.135020] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250622080721.4661-1-pmenzel@molgen.mpg.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix warnings reported by sparse, related to incorrect type:
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types)
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404040339.S7CUIgf3-lkp@intel.com/
Fixes: 78034cbece79 ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250613214608.2250130-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Without explicitly setting a parent for the watchdog device, the device is
registered with a NULL parent. This causes device_add() (called internally
by devm_watchdog_register_device()) to register the device under
/sys/devices/virtual, since no parent is provided. The result is:
DEVPATH=/devices/virtual/watchdog/watchdog0
To fix this, assign &pdev->dev as the parent of the watchdog device before
calling devm_watchdog_register_device(). This ensures the device is
associated with the Portwell EC platform device and placed correctly in
sysfs as:
DEVPATH=/devices/platform/portwell-ec/watchdog/watchdog0
This aligns the device hierarchy with expectations and avoids misplacement
under the virtual class.
Fixes: 835796753310 ("platform/x86: portwell-ec: Add GPIO and WDT driver for Portwell EC")
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Link: https://lore.kernel.org/r/20250616074819.63547-1-ivan.hu@canonical.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
m16 R1"
This reverts commit 5ff79cabb23a2f14d2ed29e9596aec908905a0e6.
Although the Alienware m16 R1 AMD model supports G-Mode, it actually has
a lower power ceiling than plain "performance" profile, which results in
lower performance.
Reported-by: Cihan Ozakca <cozakca@outlook.com>
Cc: stable@vger.kernel.org # 6.15.x
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250611-m16-rev-v1-1-72d13bad03c9@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every other s2idle cycle fails to reach hardware sleep when keyboard
wakeup is enabled. This appears to be an EC bug, but the vendor
refuses to fix it.
It was confirmed that turning off i8042 wakeup avoids ths issue
(albeit keyboard wakeup is disabled). Take the lesser of two evils
and add it to the i8042 quirk list.
Reported-by: Raoul <ein4rth@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116
Tested-by: Raoul <ein4rth@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Using a string variable in place of a format string causes a W=1 build warning:
drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c:61:40: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
61 | length += sysfs_emit_at(buf, length, agent_name[agent]);
| ^~~~~~~~~~~~~~~~~
Use the safer "%s" format string to print it instead.
Fixes: b98fa870fce2 ("platform/x86/intel-uncore-freq: Add attributes to show agent types")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250610093459.2646337-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Panther Lake support to Intel PMC SSRAM Telemetry driver.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250610230416.622970-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Lunar Lake support to Intel PMC SSRAM Telemetry driver.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250610230416.622970-1-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
I'm moving all my kernel work over to using my kernel.org email address.
Update .mailmap and MAINTAINER entries still using hdegoede@redhat.com.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250609143558.42941-2-hansg@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Bump the module version.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-6-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The dell_rbu driver will use memset() to clear the data held by each
packet when it is no longer needed (when the driver is unloaded, the
packet size is changed, etc).
The amount of memory that is cleared (before this patch) is the normal
packet size. However, the last packet in the list may be smaller.
Fix this to only clear the memory actually used by each packet, to prevent
it from writing past the end of data buffer.
Because the packet data buffers are allocated with __get_free_pages() (in
page-sized increments), this bug could only result in a buffer being
overwritten when a packet size larger than one page is used. The only user
of the dell_rbu module should be the Dell BIOS update program, which uses
a packet size of 4096, so no issues should be seen without the patch, it
just blocks the possiblity.
Fixes: 6c54c28e69f2 ("[PATCH] dell_rbu: new Dell BIOS update driver")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Pass the correct list head to list_for_each_entry*() when looping through
the packet list.
Without this patch, reading the packet data via sysfs will show the data
incorrectly (because it starts at the wrong packet), and clearing the
packet list will result in a NULL pointer dereference.
Fixes: d19f359fbdc6 ("platform/x86: dell_rbu: don't open code list_for_each_entry*()")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-3-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix a sparse lock context warning.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-2-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
commit 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in
amd_pmf_init_smart_pc()") adjusted the error handling flow to use a ladder
but this isn't actually needed because work is only scheduled in
amd_pmf_start_policy_engine() and with device managed cleanups pointers
for allocations don't need to be freed.
Adjust the error flow to a single call to amd_pmf_deinit_smart_pc() for
the cases that need to clean up.
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250512211154.2510397-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-4-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If any of the tee init fails, pass up the errors and clear the tee_ctx
pointer. This will prevent cleaning up multiple times.
Fixes: ac052d8c08f9d ("platform/x86/amd/pmf: Add PMF TEE interface")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250512211154.2510397-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-3-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If setting up smart PC fails for any reason then this can lead to
a double free when unloading amd-pmf. This is because dev->buf was
freed but never set to NULL and is again freed in amd_pmf_remove().
To avoid subtle allocation bugs in failures leading to a double free
change all allocations into device managed allocations.
Fixes: 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()")
Link: https://lore.kernel.org/r/20250512211154.2510397-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Currently hsmp_send_message() uses down_timeout() with a 100ms timeout
to take the semaphore. However __hsmp_send_message(), the content of the
critical section, has a sleep in it. On systems with significantly
delayed scheduling behaviour this may take over 100ms.
Convert this method to down_interruptible(). Leave the error handling
the same as the documentation currently is not specific about what error
is returned.
Previous behaviour: a caller who competes with another caller stuck in
the critical section due to scheduler delays would receive -ETIME.
New behaviour: a caller who competes with another caller stuck in the
critical section due to scheduler delays will complete successfully.
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-2-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
__hsmp_send_message sleeps between result read attempts and has a
timeout of 100ms. Under extreme load it's possible for these sleeps to
take a long time, exceeding the 100ms. In this case the current code
does not check the register and fails with ETIMEDOUT.
Refactor the loop to ensure there is at least one read of the register
after a sleep of any duration. This removes instances of ETIMEDOUT with
a single caller, even with a misbehaving scheduler. Tested on AMD
Bergamo machines.
Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com>
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|