| Age | Commit message (Collapse) | Author |
|---|
|
Previously, trying to insert an ip4/ip6 ntuple rule with an unset
l4proto would get rejected with -EOPNOTSUPP. For example, the following
would fail:
ethtool -N eth0 flow-type ip6 dst-ip $IP6 context 1
The reason was that all the l4proto validation was being run despite the
l4proto mask being set to 0x0. Fix by respecting the mask on l4proto and
treating a mask of 0x0 as wildcard l4proto.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/1ac93a2836b25f79e7045f8874d9a17875229ffc.1730778566.git.dxu@dxuuu.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 9ba0e56199e3 ("bnxt_en: Enhance ethtool ntuple support for ip
flows besides TCP/UDP") added support for ip4/ip6 ntuple rules.
However, if you wanted to wildcard over l4proto, you had to provide
0xFF.
The choice of 0xFF is non-standard and non-intuitive. Delete support for
it in this commit. Next commit we will introduce a cleaner way to
wildcard l4proto.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/a5ba0d3bd926d27977c317efa7fdfbc8a704d2b8.1730778566.git.dxu@dxuuu.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20241105093125.1087202-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we remove modes from EEE advertisement and disable / re-enable EEE,
then advertisement is set to all supported modes. I don't think this is
what the user expects. So respect the cached advertisement and just fall
back to all supported modes if cached advertisement is empty.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c75f7f8b-5571-429f-abd3-ce682d178a4b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net: add debug checks to skb_reset_xxx_header()
Add debug checks (only enabled for CONFIG_DEBUG_NET=y builds),
to catch bugs earlier.
====================
Link: https://patch.msgid.link/20241105174403.850330-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure (skb->data - skb->head) can fit in skb->mac_header
This needs CONFIG_DEBUG_NET=y.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20241105174403.850330-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure (skb->data - skb->head) can fit in skb->network_header
This needs CONFIG_DEBUG_NET=y.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20241105174403.850330-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure (skb->data - skb->head) can fit in skb->transport_header
This needs CONFIG_DEBUG_NET=y.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20241105174403.850330-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure (skb->data - skb->head) can fit in skb->inner_mac_header
This needs CONFIG_DEBUG_NET=y.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20241105174403.850330-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure (skb->data - skb->head) can fit in skb->inner_network_header
This needs CONFIG_DEBUG_NET=y.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20241105174403.850330-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure (skb->data - skb->head) can fit in skb->inner_transport_header
This needs CONFIG_DEBUG_NET=y.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20241105174403.850330-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent discussions show that skb_reset_mac_len() should be more careful.
We expect the MAC header being set.
If not, clear skb->mac_len and fire a warning for CONFIG_DEBUG_NET=y builds.
If after investigations we find that not having a MAC header was okay,
we can remove the warning.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89iJZGH+yEfJxfPWa3Hm7jxb-aeY2Up4HufmLMnVuQXt38A@mail.gmail.com/T/
Cc: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20241105174403.850330-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Paolo Abeni says:
====================
ipv6: fix hangup on device removal
This addresses the infamous unregister_netdevice splat in net selftests;
the actual fix is carried by the first patch, while the 2nd one
addresses a related problem in the relevant test that was patially
hiding the problem.
Targeting net-next as the issue is quite old and I feel a little lost
in the fib info/nh jungle.
====================
Link: https://patch.msgid.link/cover.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A recent refactor transformed the check for process completion
in a true statement, due to a typo.
As a result, the relevant test-case is unable to catch the
regression it was supposed to detect.
Restore the correct condition.
Fixes: 691bb4e49c98 ("selftests: net: avoid just another constant wait")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/0e6f213811f8e93a235307e683af8225cc6277ae.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CI is hitting some aperiodic hangup at device removal time in the
pmtu.sh self-test:
unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 6
ref_tracker: veth_A-R1@ffff888013df15d8 has 1/5 users at
dst_init+0x84/0x4a0
dst_alloc+0x97/0x150
ip6_dst_alloc+0x23/0x90
ip6_rt_pcpu_alloc+0x1e6/0x520
ip6_pol_route+0x56f/0x840
fib6_rule_lookup+0x334/0x630
ip6_route_output_flags+0x259/0x480
ip6_dst_lookup_tail.constprop.0+0x5c2/0x940
ip6_dst_lookup_flow+0x88/0x190
udp_tunnel6_dst_lookup+0x2a7/0x4c0
vxlan_xmit_one+0xbde/0x4a50 [vxlan]
vxlan_xmit+0x9ad/0xf20 [vxlan]
dev_hard_start_xmit+0x10e/0x360
__dev_queue_xmit+0xf95/0x18c0
arp_solicit+0x4a2/0xe00
neigh_probe+0xaa/0xf0
While the first suspect is the dst_cache, explicitly tracking the dst
owing the last device reference via probes proved such dst is held by
the nexthop in the originating fib6_info.
Similar to commit f5b51fe804ec ("ipv6: route: purge exception on
removal"), we need to explicitly release the originating fib info when
disconnecting a to-be-removed device from a live ipv6 dst: move the
fib6_info cleanup into ip6_dst_ifdown().
Tested running:
./pmtu.sh cleanup_ipv6_exception
in a tight loop for more than 400 iterations with no spat, running an
unpatched kernel I observed a splat every ~10 iterations.
Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/604c45c188c609b732286b47ac2a451a40f6cf6d.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dealloc flag may be cleared and the extent won't reach the disk in
cow_file_range when errors path. The reserved qgroup space is freed in
commit 30479f31d44d ("btrfs: fix qgroup reserve leaks in
cow_file_range"). However, the length of untouched region to free needs
to be adjusted with the correct remaining region size.
Fixes: 30479f31d44d ("btrfs: fix qgroup reserve leaks in cow_file_range")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Haisu Wang <haisuwang@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At insert_delayed_ref() if we need to update the action of an existing
ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's
ref_add_list using list_del(), which leaves the ref's add_list member
not reinitialized, as list_del() sets the next and prev members of the
list to LIST_POISON1 and LIST_POISON2, respectively.
If later we end up calling drop_delayed_ref() against the ref, which can
happen during merging or when destroying delayed refs due to a transaction
abort, we can trigger a crash since at drop_delayed_ref() we call
list_empty() against the ref's add_list, which returns false since
the list was not reinitialized after the list_del() and as a consequence
we call list_del() again at drop_delayed_ref(). This results in an
invalid list access since the next and prev members are set to poison
pointers, resulting in a splat if CONFIG_LIST_HARDENED and
CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences
otherwise.
So fix this by deleting from the list with list_del_init() instead.
Fixes: 1d57ee941692 ("btrfs: improve delayed refs iterations")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
With util-linux 2.40.2, the 'mount' utility is already utilizing the new
mount API. e.g:
# strace mount -o subvol=subv1,ro /dev/test/scratch1 /mnt/test/
...
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/mapper/test-scratch1", 0) = 0
fsconfig(3, FSCONFIG_SET_STRING, "subvol", "subv1", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = 0
fsmount(3, FSMOUNT_CLOEXEC, 0) = 4
mount_setattr(4, "", AT_EMPTY_PATH, {attr_set=MOUNT_ATTR_RDONLY, attr_clr=0, propagation=0 /* MS_??? */, userns_fd=0}, 32) = 0
move_mount(4, "", AT_FDCWD, "/mnt/test", MOVE_MOUNT_F_EMPTY_PATH) = 0
But this leads to a new problem, that per-subvolume RO/RW mount no
longer works, if the initial mount is RO:
# mount -o subvol=subv1,ro /dev/test/scratch1 /mnt/test
# mount -o rw,subvol=subv2 /dev/test/scratch1 /mnt/scratch
# mount | grep mnt
/dev/mapper/test-scratch1 on /mnt/test type btrfs (ro,relatime,discard=async,space_cache=v2,subvolid=256,subvol=/subv1)
/dev/mapper/test-scratch1 on /mnt/scratch type btrfs (ro,relatime,discard=async,space_cache=v2,subvolid=257,subvol=/subv2)
# touch /mnt/scratch/foobar
touch: cannot touch '/mnt/scratch/foobar': Read-only file system
This is a common use cases on distros.
[CAUSE]
We have a workaround for remount to handle the RO->RW change, but if the
mount is using the new mount API, we do not do that, and rely on the
mount tool NOT to set the ro flag.
But that's not how the mount tool is doing for the new API:
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/mapper/test-scratch1", 0) = 0
fsconfig(3, FSCONFIG_SET_STRING, "subvol", "subv1", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0 <<<< Setting RO flag for super block
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = 0
fsmount(3, FSMOUNT_CLOEXEC, 0) = 4
mount_setattr(4, "", AT_EMPTY_PATH, {attr_set=MOUNT_ATTR_RDONLY, attr_clr=0, propagation=0 /* MS_??? */, userns_fd=0}, 32) = 0
move_mount(4, "", AT_FDCWD, "/mnt/test", MOVE_MOUNT_F_EMPTY_PATH) = 0
This means we will set the super block RO at the first mount.
Later RW mount will not try to reconfigure the fs to RW because the
mount tool is already using the new API.
This totally breaks the per-subvolume RO/RW mount behavior.
[FIX]
Do not skip the reconfiguration even if using the new API. The old
comments are just expecting any mount tool to properly skip the RO flag
set even if we specify "ro", which is not the reality.
Update the comments regarding the backward compatibility on the kernel
level so it works with old and new mount utilities.
CC: stable@vger.kernel.org # 6.8+
Fixes: f044b318675f ("btrfs: handle the ro->rw transition for mounting different subvolumes")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Zijian Zhang says:
====================
Several fixes to test_sockmap and added push/pop logic for msg_verify_data
Before the fixes, some of the tests in test_sockmap are problematic,
resulting in pseudo-correct result.
1. txmsg_pass is not set in some tests, as a result, no eBPF program is
attached to the sockmap.
2. In SENDPAGE, a wrong iov_length in test_send_large may result in some
test skippings and failures.
3. The calculation of total_bytes in msg_loop_rx is wrong, which may cause
msg_loop_rx end early and skip some data tests.
Besides, for msg_verify_data, I added push/pop checking logic to function
msg_verify_data and added more tests for different cases.
After that, I found that there are some bugs in bpf_msg_push_data,
bpf_msg_pop_data and sk_msg_reset_curr, and fix them. I guess the reason
why they have not been exposed is that because of the above problems, they
will not be triggered.
With the fixes, we can pass the sockmap test with data integrity test now.
However, the fixes to test_sockmap expose more problems in sockhash test
with SENDPAGE and ktls with SENDPAGE.
v1 -> v2:
- Rebased to the latest bpf-next net branch.
The problem I observed,
1. In sockhash test, a NULL pointer kernel BUG will be reported for nearly
every cork test. More inspections are needed for splice_to_socket.
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 0 P4D 0
Oops: Oops: 0000 [#3] PREEMPT SMP PTI
CPU: 3 UID: 0 PID: 2122 Comm: test_sockmap 6.12.0-rc2.bm.1-amd64+ #98
Tainted: [D]=DIE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:splice_to_socket+0x34a/0x480
Call Trace:
<TASK>
? __die_body+0x1e/0x60
? page_fault_oops+0x159/0x4d0
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? splice_to_socket+0x34a/0x480
? __memcg_slab_post_alloc_hook+0x205/0x3c0
? alloc_pipe_info+0xd6/0x1f0
? __kmalloc_noprof+0x37f/0x3b0
direct_splice_actor+0x40/0x100
splice_direct_to_actor+0xfd/0x290
? __pfx_direct_splice_actor+0x10/0x10
do_splice_direct_actor+0x82/0xb0
? __pfx_direct_file_splice_eof+0x10/0x10
do_splice_direct+0x13/0x20
? __pfx_direct_splice_actor+0x10/0x10
do_sendfile+0x33c/0x3f0
__x64_sys_sendfile64+0xa7/0xc0
do_syscall_64+0x62/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Modules linked in:
CR2: 0000000000000008
---[ end trace 0000000000000000 ]---
2. txmsg_pass are not set before, and some tests are skipped. Now after
the fixes, we have some failure cases now. More fixes are needed either
for the selftest or the ktls kernel code.
1/ 6 sockhash:ktls:txmsg test passthrough:OK
2/ 6 sockhash:ktls:txmsg test redirect:OK
3/ 1 sockhash:ktls:txmsg test redirect wait send mem:OK
4/ 6 sockhash:ktls:txmsg test drop:OK
5/ 6 sockhash:ktls:txmsg test ingress redirect:OK
6/ 7 sockhash:ktls:txmsg test skb:OK
7/12 sockhash:ktls:txmsg test apply:OK
8/12 sockhash:ktls:txmsg test cork:OK
9/ 3 sockhash:ktls:txmsg test hanging corks:OK
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
10/11 sockhash:ktls:txmsg test push_data:FAIL
detected data corruption @iov[0]:0 17 != 00, 00 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 00 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
11/17 sockhash:ktls:txmsg test pull-data:FAIL
recv failed(): Invalid argument
rx thread exited with err 1.
recv failed(): Invalid argument
rx thread exited with err 1.
recv failed(): Bad message
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
detected data corruption @iov[0]:0 17 != 00, 03 ?= 01
data verify msg failed: Unknown error -2001
rx thread exited with err 1.
12/ 9 sockhash:ktls:txmsg test pop-data:FAIL
recv failed(): Bad message
rx thread exited with err 1.
recv failed(): Bad message
rx thread exited with err 1.
13/ 6 sockhash:ktls:txmsg test push/pop data:FAIL
14/ 1 sockhash:ktls:txmsg test ingress parser:OK
15/ 0 sockhash:ktls:txmsg test ingress parser2:OK
Pass: 11 Fail: 17
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Found in the test_txmsg_pull in test_sockmap,
```
txmsg_cork = 512; // corking is importrant here
opt->iov_length = 3;
opt->iov_count = 1;
opt->rate = 512; // sendmsg will be invoked 512 times
```
The first sendmsg will send an sk_msg with size 3, and bpf_msg_pull_data
will be invoked the first time. sk_msg_reset_curr will reset the copybreak
from 3 to 0. In the second sendmsg, since we are in the stage of corking,
psock->cork will be reused in func sk_msg_alloc. msg->sg.copybreak is 0
now, the second msg will overwrite the first msg. As a result, we could
not pass the data integrity test.
The same problem happens in push and pop test. Thus, fix sk_msg_reset_curr
to restore the correct copybreak.
Fixes: bb9aefde5bba ("bpf: sockmap, updating the sg structure should also update curr")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241106222520.527076-9-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Several fixes to bpf_msg_pop_data,
1. In sk_msg_shift_left, we should put_page
2. if (len == 0), return early is better
3. pop the entire sk_msg (last == msg->sg.size) should be supported
4. Fix for the value of variable "a"
5. In sk_msg_shift_left, after shifting, i has already pointed to the next
element. Addtional sk_msg_iter_var_next may result in BUG.
Fixes: 7246d8ed4dcc ("bpf: helper to pop data from messages")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-8-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Several fixes to bpf_msg_push_data,
1. test_sockmap has tests where bpf_msg_push_data is invoked to push some
data at the end of a message, but -EINVAL is returned. In this case, in
bpf_msg_push_data, after the first loop, i will be set to msg->sg.end, add
the logic to handle it.
2. In the code block of "if (start - offset)", it's possible that "i"
points to the last of sk_msg_elem. In this case, "sk_msg_iter_next(msg,
end)" might still be called twice, another invoking is in "if (!copy)"
code block, but actually only one is needed. Add the logic to handle it,
and reconstruct the code to make the logic more clear.
Fixes: 6fff607e2f14 ("bpf: sk_msg program helper bpf_msg_push_data")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241106222520.527076-7-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add more tests for test_txmsg_push_pop in test_sockmap for better coverage
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-6-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add push/pop checking for msg_verify_data in test_sockmap, except for
pop/push with cork tests, in these tests the logic will be different.
1. With corking, pop/push might not be invoked in each sendmsg, it makes
the layout of the received data difficult
2. It makes it hard to calculate the total_bytes in the recvmsg
Temporarily skip the data integrity test for these cases now, added a TODO
Fixes: ee9b352ce465 ("selftests/bpf: Fix msg_verify_data in test_sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a450 ("bpf: Selftests, improve test_sockmap total bytes counter")
Fixes: d69672147faa ("selftests, bpf: Add one test for sockmap with strparser")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add txmsg_pass to test_txmsg_pull/push/pop. If txmsg_pass is missing,
tx_prog will be NULL, and no program will be attached to the sockmap.
As a result, pull/push/pop are never invoked.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Christoffer reports that on some implementations, writing to
GICR_ISACTIVER0 (and similar GICD registers) can race badly with a guest
issuing a deactivation of that interrupt via the system register interface.
There are multiple reasons to this:
- this uses an early write-acknoledgement memory type (nGnRE), meaning
that the write may only have made it as far as some interconnect
by the time the store is considered "done"
- the GIC itself is allowed to buffer the write until it decides to
take it into account (as long as it is in finite time)
The effects are that the activation may not have taken effect by the time
the kernel enters the guest, forcing an immediate exit, or that a guest
deactivation occurs before the interrupt is active, doing nothing.
In order to guarantee that the write to the ISACTIVER register has taken
effect, read back from it, forcing the interconnect to propagate the write,
and the GIC to process the write before returning the read.
Reported-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241106084418.3794612-1-maz@kernel.org
|
|
Pull NFS client fixes from Anna Schumaker:
"These are mostly fixes that came up during the nfs bakeathon the other
week.
Stable Fixes:
- Fix KMSAN warning in decode_getfattr_attrs()
Other Bugfixes:
- Handle -ENOTCONN in xs_tcp_setup_socked()
- NFSv3: only use NFS timeout for MOUNT when protocols are compatible
- Fix attribute delegation behavior on exclusive create and a/mtime
changes
- Fix localio to cope with racing nfs_local_probe()
- Avoid i_lock contention in fs_clear_invalid_mapping()"
* tag 'nfs-for-6.12-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: avoid i_lock contention in nfs_clear_invalid_mapping
nfs_common: fix localio to cope with racing nfs_local_probe()
NFS: Further fixes to attribute delegation a/mtime changes
NFS: Fix attribute delegation behaviour on exclusive create
nfs: Fix KMSAN warning in decode_getfattr_attrs()
NFSv3: only use NFS timeout for MOUNT when protocols are compatible
sunrpc: handle -ENOTCONN in xs_tcp_setup_socket()
|
|
When CONFIG_DVB_DYNAMIC_MINORS, ret is not initialized, and a
semaphore is left at the wrong state, in case of errors.
Make the code simpler and avoid mistakes by having just one error
check logic used weather DVB_DYNAMIC_MINORS is used or not.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202410201717.ULWWdJv8-lkp@intel.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9e067488d8935b8cf00959764a1fa5de85d65725.1730926254.git.mchehab+huawei@kernel.org
|
|
DMA ch status register offset change in acp7.0 platform
Incorrect DMA channel status register offset check lead to
firmware boot failure.
[ 14.432497] snd_sof_amd_acp70 0000:c4:00.5: ------------[ DSP dump start ]------------
[ 14.432533] snd_sof_amd_acp70 0000:c4:00.5: Firmware boot failure due to timeout
[ 14.432549] snd_sof_amd_acp70 0000:c4:00.5: fw_state: SOF_FW_BOOT_IN_PROGRESS (3)
[ 14.432610] snd_sof_amd_acp70 0000:c4:00.5: invalid header size 0x71c41000. FW oops is bogus
[ 14.432626] snd_sof_amd_acp70 0000:c4:00.5: unexpected fault 0x71c40000 trace 0x71c40000
[ 14.432642] snd_sof_amd_acp70 0000:c4:00.5: ------------[ DSP dump end ]------------
[ 14.432657] snd_sof_amd_acp70 0000:c4:00.5: error: failed to boot DSP firmware -5
[ 14.432672] snd_sof_amd_acp70 0000:c4:00.5: fw_state change: 3 -> 4
[ 14.433260] dmic-codec dmic-codec: ASoC: Unregistered DAI 'dmic-hifi'
[ 14.433319] snd_sof_amd_acp70 0000:c4:00.5: fw_state change: 4 -> 0
[ 14.433358] snd_sof_amd_acp70 0000:c4:00.5: error: sof_probe_work failed err: -5
Update correct register offset for DMA ch status register.
Fixes: 490be7ba2a01 ("ASoC: SOF: amd: add support for acp7.0 based platform")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241106142658.1240929-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
arch_init_invariance_cppc() is called at the end of
acpi_cppc_processor_probe() in order to configure frequency invariance
based upon the values from _CPC.
This however doesn't work on AMD CPPC shared memory designs that have
AMD preferred cores enabled because _CPC needs to be analyzed from all
cores to judge if preferred cores are enabled.
This issue manifests to users as a warning since commit 21fb59ab4b97
("ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"):
```
Could not retrieve highest performance (-19)
```
However the warning isn't the cause of this, it was actually
commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") which exposed the issue.
To fix this problem, change arch_init_invariance_cppc() into a new weak
symbol that is called at the end of acpi_processor_driver_init().
Each architecture that supports it can declare the symbol to override
the weak one.
Define it for x86, in arch/x86/kernel/acpi/cppc.c, and for all of the
architectures using the generic arch_topology.c code.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219431
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241104222855.3959267-1-superm1@kernel.org
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fixes from Jarkko Sakkinen:
"A couple of fixes for keys and trusted keys"
* tag 'keys-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation
security/keys: fix slab-out-of-bounds in key_task_permission
|
|
As the introduction of the support for vsock and unix sockets in sockmap,
tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK.
vsock and af_unix sockets have vsock_sock and unix_sock instead of
inet_connection_sock. For these sockets, tls_get_ctx may return an invalid
pointer and cause page fault in function tls_sw_ctx_rx.
BUG: unable to handle page fault for address: 0000000000040030
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:sk_psock_strp_data_ready+0x23/0x60
Call Trace:
? __die+0x81/0xc3
? no_context+0x194/0x350
? do_page_fault+0x30/0x110
? async_page_fault+0x3e/0x50
? sk_psock_strp_data_ready+0x23/0x60
virtio_transport_recv_pkt+0x750/0x800
? update_load_avg+0x7e/0x620
vsock_loopback_work+0xd0/0x100
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? __kthread_cancel_work+0x40/0x40
ret_from_fork+0x1f/0x40
v2:
- Add IS_ICSK check
v3:
- Update the commits in Fixes
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20241106003742.399240-1-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff64081949 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- AMD PMF: Add new hardware id
- AMD PMC: Fix crash when loaded with enable_stb=1 on devices without STB
- Dell: Add Alienware hwid for Alienware systems with Dell WMI interface
- thinkpad_acpi: Quirk to fix wrong fan speed readings on L480
- New hotkey mappings for Dell and Lenovo laptops
* tag 'platform-drivers-x86-v6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix for ThinkPad's with ECFW showing incorrect fan speed
platform/x86: ideapad-laptop: add missing Ideapad Pro 5 fn keys
platform/x86: dell-wmi-base: Handle META key Lock/Unlock events
platform/x86: dell-smbios-base: Extends support to Alienware products
platform/x86/amd/pmc: Detect when STB is not available
platform/x86/amd/pmf: Add SMU metrics table support for 1Ah family 60h model
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix memory safety bugs in dm-cache
- fix restart/panic logic in dm-verity
- fix 32-bit unsigned integer overflow in dm-unstriped
- fix a device mapper crash if blk_alloc_disk fails
* tag 'for-6.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix potential out-of-bounds access on the first resume
dm cache: optimize dirty bit checking with find_next_bit when resizing
dm cache: fix out-of-bounds access to the dirty bitset when resizing
dm cache: fix flushing uninitialized delayed_work on cache_ctr error
dm cache: correct the number of origin blocks to match the target length
dm-verity: don't crash if panic_on_corruption is not selected
dm-unstriped: cast an operand to sector_t to prevent potential uint32_t overflow
dm: fix a crash if blk_alloc_disk fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
- report buffer sanitization fix for HID core (Jiri Kosina)
* tag 'hid-for-linus-20241105' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: core: zero-initialize the report buffer
|
|
Xiaomi Book Pro 14 2022 (MIA2210-AD) requires a quirk entry for its
internal microphone to be enabled.
This is likely due to similar reasons as seen previously on Redmi Book
14/15 Pro 2022 models (since they likely came with similar firmware):
- commit dcff8b7ca92d ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022
into DMI table")
- commit c1dd6bf61997 ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 14 2022
into DMI table")
A quirk would likely be needed for Xiaomi Book Pro 15 2022 models, too.
However, I do not have such device on hand so I will leave it for now.
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://patch.msgid.link/20241106024052.15748-1-jeffbai@aosc.io
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Sierra Wireless EM86xx with USB-id 0x1199:0x90e5 and
0x1199:0x90e4.
0x1199:0x90e5
T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 14 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1199 ProdID=90e5 Rev= 5.15
S: Manufacturer=Sierra Wireless, Incorporated
S: Product=Semtech EM8695 Mobile Broadband Adapter
S: SerialNumber=004403161882339
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x1199:0x90e4
T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1199 ProdID=90e4 Rev= 0.00
S: Manufacturer=Sierra Wireless, Incorporated
S: SerialNumber=004403161882339
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Jack Wu <wojackbb@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The logic for handling SVE traps manipulates saved FPSIMD/SVE state
incorrectly, and a race with preemption can result in a task having
TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SVE traps enabled). This has been observed to result
in warnings from do_sve_acc() where SVE traps are not expected while
TIF_SVE is set:
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
Warnings of this form have been reported intermittently, e.g.
https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/
https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/
The race can occur when the SVE trap handler is preempted before and
after manipulating the saved FPSIMD/SVE state, starting and ending on
the same CPU, e.g.
| void do_sve_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
|
| sve_init_regs() {
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| ...
| } else {
| fpsimd_to_sve(current);
| current->thread.fp_type = FP_STATE_SVE;
| }
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SVE traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Fixes: cccb78ce89c4 ("arm64/sve: Rework SVE access trap to convert state in registers")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241030-arm64-fpsimd-foreign-flush-v1-1-bd7bd66905a2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
fan speed
Fix for Thinkpad's with ECFW showing incorrect fan speed. Some models use
decimal instead of hexadecimal for the speed stored in the EC registers.
For example the rpm register will have 0x4200 instead of 0x1068, here
the actual RPM is "4200" in decimal.
Add a quirk to handle this.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241105235505.8493-1-vishnuocv@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add type annotation to the "tos" field of struct xfrm_dst_lookup_params,
to ensure that the ECN bits aren't mistakenly taken into account when
doing route lookups. Rename that field (tos -> dscp) to make that
change explicit.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Pass a dscp_t variable to xfrm_dst_lookup(), instead of an int, to
prevent accidental setting of ECN bits in ->flowi4_tos.
Only xfrm_bundle_create() actually calls xfrm_dst_lookup(). Since it
already has a dscp_t variable to pass as parameter, we only need to
remove the inet_dscp_to_dsfield() conversion.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Use a dscp_t variable to store the result of xfrm_get_dscp().
This prepares for the future conversion of xfrm_dst_lookup().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Return a dscp_t variable to prepare for the future conversion of
xfrm_bundle_create() to dscp_t.
While there, rename the function "xfrm_get_dscp", to align its name
with the new return type.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Allocate one extra virtio_device_id as null terminator, otherwise
vdpa_mgmtdev_get_classes() may iterate multiple times and visit
undefined memory.
Fixes: ffbda8e9df10 ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa")
Cc: stable@vger.kernel.org
Suggested-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Xiaoguang Wang <lege.wang@jaguarmicro.com>
Message-Id: <20241105133518.1494-1-lege.wang@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq
resources by virtio_pci_vq_info pointer. The info pointer of admin
vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[].
Using the info pointer from vp_dev->vqs[] for admin vq causes a
kernel NULL pointer dereference bug.
In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer
from vp_dev->admin_vq.info for admin vq to clean up the resources.
Also make info ptr as argument of vp_del_vq() to be symmetric with
vp_setup_vq().
vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace:
==================================================================
BUG: kernel NULL pointer dereference, address:0000000000000000
...
CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1
RIP: 0010:vp_reset+0x57/0x90 [virtio_pci]
Call Trace:
<TASK>
...
? vp_reset+0x57/0x90 [virtio_pci]
? vp_reset+0x38/0x90 [virtio_pci]
virtio_reset_device+0x1d/0x30
remove_vq_common+0x1c/0x1a0 [virtio_net]
virtnet_remove+0xa1/0xc0 [virtio_net]
virtio_dev_remove+0x46/0xa0
...
virtio_pci_driver_exit+0x14/0x810 [virtio_pci]
==================================================================
Fixes: 4c3b54af907e ("virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20241024135406.81388-1-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
ifcvf_init_hw() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
Convert the error check to plain non-zero check.
Fixes: 5a2414bc454e ("virtio: Intel IFC VF driver for VDPA")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20241017013812.129952-1-yuancan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@kernel.org>
|
|
Corrected minor typo in tools/virtio/vringh_test.c:
- Fixed "retreives" to "retrieves"
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Message-Id: <20241008145204.478749-1-cvam0000@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
