summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-15drm/amd/powerplay: delete PCC error message in smu7_hwmgr.cRex Zhu
In some asics,Really no need to program PCC HW register. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu/sdma4: Enable sdma poll mem addr on vega10 for SRIOVFrank Min
While doing flr on VFs, there is possibility to lost the doorbell writing for sdma, so enable poll mem for sdma, then sdma fw would check the pollmem holding wptr. Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu/uvd7: optimize uvd initialization sequence for SRIOVFrank Min
1.Since in sriov there is no need of decoding, so skip the related code; 2.Vcpu boot up and umc enable need to take at the end of the init sequence; Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu/vce4: optimize vce 4.0 init table sequence for SRIOVFrank Min
Optimize init table sequence for sriov. Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu: According hardware design revert vce and uvd doorbell assignmentFrank Min
Now uvd doorbell is from 0xf8-0xfb and vce doorbell is from 0xfc-0xff Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu: Skip uvd and vce ring test for SRIOVFrank Min
Since rptr would not be accessed on later secure asics in sriov, remove the ring test. Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu/vce4: Remove vce interrupt enable related code for sriovFrank Min
Interrupt enable is contained in vce init table and this register could not be accessed in secure ASICs, so just remove it. Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu: Enable uvd and vce gpu re-init for SRIOV gpu resetFrank Min
Add uvd and vce re-init after gpu reset. Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu: Clear vce&uvd ring wptr for SRIOVFrank Min
MMSCH FW need to get the wptr from 0 after it get the mailbox request from driver, since every time kick the mailbox, mmsch thinks that it is the first time engine start to initialize. Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu: Add support for filling a buffer with 64 bit valueYong Zhao
That function will be used later to support setting a page table block with 64 bit value. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu: disable vcn power control for nowLeo Liu
The dpm control for vcn has been moved to firmware, kernel always spins "amdgpu: [powerplay] pp_dpm_powergate_uvd was not implemented", each time when application runs, disable it for now till pg/cg. Also remove clock manual setting when dpm disabled, which was inherited from uvd. Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu/dce_virtual: remove error message for vega10Xiangliang.Yu
Vega10 also support virtual display, remove the error message. Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/i915: Add support for drm syncobjsJason Ekstrand
This commit adds support for waiting on or signaling DRM syncobjs as part of execbuf. It does so by hijacking the currently unused cliprects pointer to instead point to an array of i915_gem_exec_fence structs which containe a DRM syncobj and a flags parameter which specifies whether to wait on it or to signal it. This implementation theoretically allows for both flags to be set in which case it waits on the dma_fence that was in the syncobj and then immediately replaces it with the dma_fence from the current execbuf. v2: - Rebase on new syncobj API v3: - Pull everything out into helpers - Do all allocation in gem_execbuffer2 - Pack the flags in the bottom 2 bits of the drm_syncobj* v4: - Prevent a potential race on syncobj->fence Testcase: igt/gem_exec_fence/syncobj* Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/1499289202-25441-1-git-send-email-jason.ekstrand@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170815145733.4562-1-chris@chris-wilson.co.uk
2017-08-15drm/i915: Handle full s64 precision for wait-ioctlChris Wilson
The wait-ioctl is optionally supplied a timeout with nanosecond precision in a s64 field. We use nsecs_to_jiffies64() to convert that into the jiffies consumed by the scheduler, but internally nsecs_to_jiffies64() does not guard against overflow (as it's purpose is for use by the scheduler and not drivers!). So we must guard against the overflow ourselves, and in the process note that we may then return much earlier than the timeout selected by the user, so don't report ETIME unless we do hit the timeout. (Woe betold us though if the user waits for a year (32bit) and the request is still not complete!) v2: Refine overflow detection (to not include an overffow itself) Reported-by: Jason Ekstrand <jason.ekstrand@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170811105731.9482-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-08-15drm/i915: Split obj->cache_coherent to track r/wChris Wilson
Another month, another story in the cache coherency saga. This time, we come to the realisation that i915_gem_object_is_coherent() has been reporting whether we can read from the target without requiring a cache invalidate; but we were using it in places for testing whether we could write into the object without requiring a cache flush. So split the tracking into two, one to decide before reads, one after writes. See commit e27ab73d17ef ("drm/i915: Mark CPU cache as dirty on every transition for CPU writes") for the previous entry in this saga. v2: Be verbose v3: Remove unused function (i915_gem_object_is_coherent) v4: Fix inverted coherency check prior to execbuf (from v2) v5: Add comment for nasty code where we are optimising on gcc's behalf. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101109 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101555 Testcase: igt/kms_mmap_write_crc Testcase: igt/kms_pwrite_crc Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dongwon Kim <dongwon.kim@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811111116.10373-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-08-15drm/etnaviv: switch GEM allocations to __GFP_RETRY_MAYFAILLucas Stach
Now that we have a GFP flags with the expected semantic of "try reasonably hard to find memory, but don't OOM", we should start to use it. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-08-15drm/etnaviv: don't fail GPU bind when CONFIG_THERMAL isn't enabledLucas Stach
The stub functions returns -ENODEV when trying to register the cooling device, thus failing the GPU bind, rendering the GPU subsystem unusable when CONFIG_THERMAL isn't enabled. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-08-15drm/i915/hsw+: Add support for multiple power well regsImre Deak
Future platforms increase the number of power wells which require additional control registers. A convenient way to select the correct register is to use the high bits of the power well ID as index. This patch only prepares for this, while upcoming platform enabling patches will add the actual new power well IDs and corresponding power well control registers. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rakshmi Bhatia <rakshmi.bhatia@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Rakshmi Bhatia <rakshmi.bhatia@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170814151530.24154-2-imre.deak@intel.com
2017-08-15drm: omapdrm: Remove dss_features.hLaurent Pinchart
The header file only contains four macros, two of which are never used. Move the other two to dss.h and remove dss_features.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move supported outputs feature to dss driverLaurent Pinchart
The supported outputs feature is specific to the DSS, move it from the omap_dss_features structure to the dss driver. The omap_dss_features structure is now empty and can be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move DSS_FCK feature to dss driverLaurent Pinchart
The FEAT_PARAM_DSS_FCK feature is specific to the DSS, move it from the omap_dss_features structure to the dss driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move PCD, LINEWIDTH and DOWNSCALE features to dispc driverLaurent Pinchart
The FEAT_PARAM_DSS_PCD, FEAT_PARAM_LINEWIDTH and FEAT_PARAM_DOWNSCALE features are specific to the DISPC, move them from the omap_dss_features structure to the dispc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move FEAT_PARAM_DSI* features to dsi driverLaurent Pinchart
The FEAT_PARAM_DSI* features are specific to the DSI, move them from the omap_dss_features structure to the dsi driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move FEAT_* features to dispc driverLaurent Pinchart
All the remaining FEAT_* features are specific to the DISPC, move them from the omap_dss_features structure to the dispc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move FEAT_LCD_CLK_SRC feature to dss_features structureLaurent Pinchart
The FEAT_LCD_CLK_SRC feature is specific to the DSS, move it from the omap_dss_features structure to the dss_features structure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature to dpi codeLaurent Pinchart
The FEAT_DPI_USES_VDDS_DSI feature is specific to the DPI, move it from the omap_dss_features structure to the dpi code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driverLaurent Pinchart
The FEAT_HDMI_* features are specific to the HDMI4, move them from the omap_dss_features structure to the hdmi4 driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move FEAT_DSI_* features to dsi driverLaurent Pinchart
The FEAT_DSI_* features are specific to the DSI, move them from the omap_dss_features structure to the dsi driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move FEAT_VENC_REQUIRES_TV_DAC_CLK to venc driverLaurent Pinchart
The FEAT_VENC_REQUIRES_TV_DAC_CLK is specific to the VENC, move it from the omap_dss_features structure to the venc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move reg_fields to dispc_features structureLaurent Pinchart
The reg_fields feature describes DISPC registers only. Move it from the omap_dss_features structure to the dispc_features structure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move DISPC_CLK_SWITCH reg feature to struct dss_featuresLaurent Pinchart
The register belongs to the DSS, move the feature to the dss_features structure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move num_ovls and num_mgrs to dispc_features structureLaurent Pinchart
The num_ovls and num_mgrs are dispc features. Move them from the omap_dss_features structure to the dispc_features structure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move overlay caps features to dispc_features structureLaurent Pinchart
The overlay_caps is a dispc feature. Move it from the omap_dss_features structure to the dispc_features structure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move color modes feature to dispc_features structureLaurent Pinchart
The supported_color_modes is a dispc feature. Move it from the omap_dss_features structure to the dispc_features structure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move size unit features to dispc_features structureLaurent Pinchart
The buffer_size_unit and burst_size_unit are dispc features. Move them from the omap_dss_features structure to the dispc_features structure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move shutdown() handler from core to dssLaurent Pinchart
In preparation for removal of the core module, move the shutdown() handler from core to dss. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Move all debugfs code from core to dssLaurent Pinchart
debugfs code is spread between the core and dss drivers. In preparation for removal of the core driver, move it all to the dss driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: dss: Initialize DSS internal features at probe timeLaurent Pinchart
The DSS internal features are derived from the platform device compatible string which is available at probe time. Don't delay initialization until bind time. This prepares for the merge of the two DSS features structures that will be needed before the DSS is bound. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: dss: Use supported outputs instead of display typesLaurent Pinchart
The dss driver uses the supported display types to check whether the DSS has SDI, VENC or HDMI outputs. We can instead use the supported outputs the provide the same information. This removes the last use of the supported display types, that we can then remove as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: dss: Select features based on compatible stringLaurent Pinchart
Use the compatible string instead of the OMAP SoC revision to determine device features. The various OMAP3-based SoCs can't be told apart using the compatible string, use soc_device_match() to tell them apart. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: dpi: Replace OMAP SoC model checks with DSS modelLaurent Pinchart
The DPI code only needs to differentiate between major OMAP revisions, which can be obtained from the DSS compatible string. Replace the OMAP SoC model checks to prepare for removal of the OMAP SoC version platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: dispc: Select features based on compatible stringLaurent Pinchart
Use the compatible string instead of the OMAP SoC revision to determine device features. On OMAP34xx the features depend on the ES revision that can not be determined from the compatible string. Use soc_device_match() in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: Don't forward set_min_bus_tput() to no-op platform codeLaurent Pinchart
The OMAP implementation of the set_min_bus_tput() API is a no-op. There's no point in forwarding the driver calls to the platform code. Remove the use of the related platform data callback, but keep the internal function as a reminder that the feature will need to be implemented when the OMAP platform will provide support. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: dsi: Handle pin muxing internallyLaurent Pinchart
Don't rely on callback functions provided by the platform, but access the syscon internally to mux the DSI pins. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: dsi: Store DSI model and PLL hardware data in OF dataLaurent Pinchart
The DSI PLL hardware data and DSS channels are selected based on the OMAP SoC model. There's no need for fine-grained model information, as the driver only needs to differentiate between OMAP3, OMAP4 and OMAP5. As this can be done through the DSI compatible string, store the corresponding information in OF match data instead to avoid accessing the OMAP SoC model. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: dss: Split operations out of dss_features structureLaurent Pinchart
Move the two function pointers to a new dss_ops structure. This will allow merging the dss_features and omap_dss_features structures without having to expose the DPI source selection and LCD clock muxing functions in header files. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: hdmi: Store PHY features in PHY data structureLaurent Pinchart
PHY features are stored in a global variable, while they should be properties of the PHY object. As existing OMAP platforms have a single HDMI PHY this doesn't cause any issue, but doesn't follow the driver model. Move the PHY features to the HDMI PHY data structure to follow the driver model and pave the road for multiple HDMI PHYs support. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: venc: Don't export omap_dss_pal_vm and omap_dss_ntsc_vmLaurent Pinchart
The two variables are never used outside of their compilation unit, make them static. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: dpi: Remove unneeded regulator checkLaurent Pinchart
The dpi_display_enable() function ensures that a VDDS_DSI regulator is available if the DSI uses the VDDS_DSI supply. This is not needed, as a failure to get the VDDS_DSI supply will result in a probe failure, dpi_display_enable() will thus never be called in that case. Remove the check, and replace tests for the FEAT_DPI_USES_VDDS_DSI feature with a test for the regulator object. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-15drm: omapdrm: panel-dpi: Remove unneeded check for OF nodeLaurent Pinchart
As non-DT booting is no longer supported, the only way to instantiate the device is through an OF node, which is guaranteed to be present. Remove the unneeded check. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
generated by cgit (git 2.34.1) at 2025-09-12 17:51:11 +0000