| Age | Commit message (Collapse) | Author |
|---|
|
When resolutions are different, the expected behavior is to
scale the image. Implement a vertical scaler as the first step.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The vim2m driver doesn't enforce that the capture and output
buffers would have the same size. Do the right thing if the
buffers are different, zeroing the buffer before writing,
ensuring that lines will be aligned and it won't write past
the buffer area.
This is a temporary fix.
A proper fix is to either implement a simple scaler at vim2m,
or to better define the behaviour of M2M transform drivers
at V4L2 API with regards to its capability of scaling the
image or not.
In any case, such changes would deserve a separate patch
anyway, as it would imply on some behavoral change.
Also, as we have an actual bug of writing data at wrong
places, let's fix this here, and add a mental note that
we need to properly address it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The only real restriction at vim2m is that width should be
multiple of two, as the copy routine always copy two pixels
each time.
However, Bayer formats are defined as having a 2x2 matrix.
So, odd vertical numbers would cause color distortions at the
last line. So, it makes sense to use step 2 for vertical alignment
on Bayer.
With this patch, the reported formats for video capture will
be:
[0]: 'RGBP' (16-bit RGB 5-6-5)
Size: Stepwise 32x32 - 640x480 with step 2/1
[1]: 'RGBR' (16-bit RGB 5-6-5 BE)
Size: Stepwise 32x32 - 640x480 with step 2/1
[2]: 'RGB3' (24-bit RGB 8-8-8)
Size: Stepwise 32x32 - 640x480 with step 2/1
[3]: 'BGR3' (24-bit BGR 8-8-8)
Size: Stepwise 32x32 - 640x480 with step 2/1
[4]: 'YUYV' (YUYV 4:2:2)
Size: Stepwise 32x32 - 640x480 with step 2/1
[5]: 'BA81' (8-bit Bayer BGBG/GRGR)
Size: Stepwise 32x32 - 640x480 with step 2/2
[6]: 'GBRG' (8-bit Bayer GBGB/RGRG)
Size: Stepwise 32x32 - 640x480 with step 2/2
[7]: 'GRBG' (8-bit Bayer GRGR/BGBG)
Size: Stepwise 32x32 - 640x480 with step 2/2
[8]: 'RGGB' (8-bit Bayer RGRG/GBGB)
Size: Stepwise 32x32 - 640x480 with step 2/2
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
As we do alignments for width, expose it via V4L2 API.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The copy logic assumes that the data width is multiple of two,
as this is needed in order to support YUYV.
There's no reason to force it to be 8-pixel aligned, as 2-pixel
alignment is enough.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
1) Use two levels for debug:
- level 1: setup stuff
- level 2: add queue/dequeue messages
2) Better display the debug output, translating buffer
type, fourcc and making some messages clearer.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The vim2m device is interesting to simulate a webcam. As most
sensors are arranged using bayer formats, the best is to support
to output data using those formats.
So, add support for them.
All 4 8-bit bayer formats tested with:
$ qvidcap -p &
$ v4l2-ctl --stream-mmap --stream-out-mmap --stream-to-host localhost --stream-lossless --stream-out-hor-speed 1 -v pixelformat=RGGB
It was tested also with GStreamer with:
$ gst-validate-1.0 filesrc location=some_video.mp4 ! qtdemux ! avdec_h264 ! videoconvert ! videoscale ! v4l2convert disable-passthrough=1 extra-controls="s,horizontal_flip=0,vertical_flip=0" ! bayer2rgb ! videoconvert ! xvimagesink
For all possible HFLIP/VFLIP values.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux into char-misc-next
Sasha writes:
1. Exopsing counters for state changes of channel ring buffers; this is
useful to investigate performance issues. By Kimberly Brown.
2. Switching to the new generic UUID API, by Andy Shevchenko.
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Expose counters for interrupts and full conditions
vmbus: Switch to use new generic UUID API
|
|
The dasd_eckd_restore_device() function calls dasd_generic_read_dev_chars
with a temporary buffer on the stack. With CONFIG_VMAP_STACK=y this is
a vmalloc address but dasd_generic_restore_device() uses the address of
the buffer as I/O address. Circumvent this by using the already allocated
cqr->data buffer for the RDC data.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The reset of the prefix to zero in swsusp_arch_resume uses a 4 byte stack
slot. With CONFIG_VMAP_STACK=y this is now in the vmalloc area, this works
only with DAT enabled. Move the DAT disable in swsusp_arch_resume after
the prefix reset.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Fix the following sparse warning:
drivers/pci/controller/pci-aardvark.c:469:28: warning:
symbol 'advk_pci_bridge_emul_ops' was not declared. Should it be static?
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
In bpf/syscall.c, map_create() first set map->usercnt to 1, a file
descriptor is supposed to return to userspace. When bpf_map_new_fd()
fails, drop the refcount.
Fixes: bd5f5f4ecb78 ("bpf: Add BPF_MAP_GET_FD_BY_ID")
Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Those typos were left over from codespell check, on
my first pass or belong to code added after the time I
ran it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Yong Deng <yong.deng@magewell.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Sugaya Taichi <sugaya.taichi@socionext.com> explains:
Here is the series of patches the initial support for SC2000(M10V) of
Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in
source code.
SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
computer vision. It also features advanced functionalities such as 360-degree,
real-time spherical stitching with multi cameras, image stabilization for
without mechanical gimbals, and rolling shutter correction. More detail is
below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html
Specifications for developers are below:
- Quad-core 32bit Cortex-A7 on ARMv7-A architecture
- NEON support
- DSP
- GPU
- MAX 3GB DDR3
- Cortex-M0 for power control
- NAND Flash Interface
- SD UHS-I
- SD UHS-II
- SDIO
- USB2.0 HOST / Device
- USB3.0 HOST / Device
- PCI express Gen2
- Ethernet Engine
- I2C
- UART
- SPI
- PWM
Support is quite minimal for now, since it only includes timer, clock,
pictrl and serial controller drivers, so we can only boot to userspace
through initramfs. Support for the other peripherals will come eventually.
* milbeaut/newsoc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
Link: https://lore.kernel.org/linux-arm-kernel/1551243056-10521-1-git-send-email-sugaya.taichi@socionext.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove code that is not called anywhere, just
remove the internal ops.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
When an rc device is created, we do not know what key codes it will
support, since a new keymap might be loaded at some later point. So,
we set all keybit in the input device.
The uevent for the input device includes all the key codes, of which
there are now 768. This overflows the size of the uevent
(UEVENT_BUFFER_SIZE) and no event is generated.
Revert for now until we figure out a different solution.
This reverts commit fec225a04330d0f222d24feb5bea045526031675.
Cc: <stable@vger.kernel.org> # 4.20+
Reported-by: Christian Holpert <christian@holpert.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This reverts commit 0bd3ef34d2a8dd4056560567073d8bfc5da92e39.
There is ongoing work on objtool to identify incorrect uses of
user_access_{begin,end}. Until this is sorted, do not enable the
functionality on arm64. Also, on ARMv8.2 CPUs with hardware PAN and UAO
support, there is no obvious performance benefit to the unsafe user
accessors.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add and enable the Milbeaut M10V architecture. These configs select those
of the clock, timer and serial driver for M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch adds the minimal defconfig for the Milbeaut M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add devicetree for Milbeaut M10V SoC and M10V Evaluation board.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add timer driver for Milbeaut SoCs series.
The timer has two 32-bit width down counters, one of which is configured
as a clockevent device and the other is configured as a clock source.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add DT bindings document for Milbeaut M10V timer.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This adds the basic M10V SoC support under arch/arm.
Since all cores are activated in the custom bootloader before booting
linux, it is necessary to wait for the secondary-cores using cpu-enable-
method and special sram.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This adds a DT binding documentation for the M10V and its evaluation
board.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This adds a compatible string "socionext,milbeaut-m10v-smp"
for Milbeaut M10V to the 32 bit ARM CPU device tree binding.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Milbeaut M10V SoC needs a part of sram for smp, so this adds the
M10V sram compatible and binding.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is
set too low. Increase it to the 2000mV as specified on the board schematic.
So far the board worked fine, because of the bug in the PMIC driver, which
used incorrect step value for that regulator. It interpreted the voltage
value set by the bootloader as 1225mV and kept it unchanged. The regulator
driver has been however fixed recently in the commit 56b5d4ea778c
("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results
in reading the proper buck8 value and forcing it to 1500mV on boot. This
is not enough for proper board operation and results in eMMC errors during
heavy IO traffic. Increasing maximum voltage value for buck8 restores
original driver behavior and fixes eMMC issues.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 86a2d2ac5e5d ("ARM: dts: Add dts file for Odroid XU3 board")
Fixes: 56b5d4ea778c ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This disables the old FBDEV driver and enables the PL111
DRM driver on the SPEAr3xx.
There are some device trees in the kernel that switches
the DT node for the PL110 to "okay" but none of these
have any display defined, so we can safely switch to this
driver before we get any users starting to define
displays. Let them do it on top of the new driver
infrastructure instead.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/fixes
Qualcomm ARM64 Fixes for 5.0-rc8
* Fix TZ memory area size to avoid crashes during boot
* tag 'qcom-fixes-for-5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: msm8998: Extend TZ reserved memory area
|
|
This adds some new driver options to the Nomadik NHK8815 defconfig:
- Activate IIO driver
- Enable CMA for coherent graphics allocations
- Activate DRM framebuffer driver for PL111
- Activate DRM panel driver for TPO TPG110
- Activate SPI GPIO driver (talks to the display)
- Activate STMPE PWM driver (used for display backlight)
- Activate PWM backlight
- Activate STw481x driver (PMIC)
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This updates the NHK8815 defconfig to reflect the recent
structural changes in Kconfigs all over the kernel:
- PREEMPT option was moved around
- MODULES options were moved around
- MTD_NAND options were moved around
- INPUT_MOUSEDEV doesn't have to be explicitly unselected
anymore (not on by default)
- DEBUG_GPIO should really not be in any default config
- MMC_BLOCK_BOUNCE is gone from Kconfig
- CRYPTO options were moved around
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.1 take4
DPIO driver
- Add support for cache stashing and enable it in dpaa2-eth driver
GUTS driver
- Make fsl_guts_get_svr() API internal in favor of more generic
soc_device_match()
* tag 'soc-fsl-next-v5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
dpaa2-eth: configure the cache stashing amount on a queue
soc: fsl: dpio: configure cache stashing destination
soc: fsl: dpio: enable frame data cache stashing per software portal
soc: fsl: guts: make fsl_guts_get_svr() static
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Jiri points out that we don't need any time checking and time string
parsing if the --time option is not set. That makes sense.
This patch refactors the time range parsing code, move the duplicated
code from perf report and perf script to time_utils and check if --time
option is set before parsing the time string. This patch is no logic
change expected. So the usage of --time is same as before.
For example:
Select the first and second 10% time slices:
perf report --time 10%/1,10%/2
perf script --time 10%/1,10%/2
Select the slices from 0% to 10% and from 30% to 40%:
perf report --time 0%-10%,30%-40%
perf script --time 0%-10%,30%-40%
Select the time slices from timestamp 3971 to 3973
perf report --time 3971,3973
perf script --time 3971,3973
Committer testing:
Using the above examples, check before and after to see if it remains
the same:
$ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ]
$
$ perf report --time 10%/1,10%/2 > /tmp/report.before.1
$ perf script --time 10%/1,10%/2 > /tmp/script.before.1
$ perf report --time 0%-10%,30%-40% > /tmp/report.before.2
$ perf script --time 0%-10%,30%-40% > /tmp/script.before.2
$ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3
$ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3
For example, the 3rd test produces this slice:
$ cat /tmp/script.before.3
cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so)
cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat)
cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so)
cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat)
cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so)
cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat)
cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat)
cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so)
cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown])
cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so)
cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so)
cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat)
cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat)
$
Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the
above chunk translates into this 'perf report' output:
$ cat /tmp/report.before.3
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717)
# Event count (approx.): 33552
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ......................
#
17.69% cat libc-2.28.so [.] malloc
14.53% cat cat [.] 0x000000000000586e
13.33% cat libc-2.28.so [.] _int_malloc
8.78% cat cat [.] 0x00000000000023b0
8.71% cat cat [.] 0x0000000000002554
8.13% cat cat [.] 0x00000000000029aa
8.10% cat cat [.] 0x00000000000030ca
7.28% cat libc-2.28.so [.] read
7.08% cat [unknown] [k] 0xffffffff9aa00163
6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5
#
# (Tip: Order by the overhead of source file name and line number: perf report -s srcline)
#
$
Now lets see after applying this patch, nothing should change:
$ perf report --time 10%/1,10%/2 > /tmp/report.after.1
$ perf script --time 10%/1,10%/2 > /tmp/script.after.1
$ perf report --time 0%-10%,30%-40% > /tmp/report.after.2
$ perf script --time 0%-10%,30%-40% > /tmp/script.after.2
$ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3
$ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3
$ diff -u /tmp/report.before.1 /tmp/report.after.1
$ diff -u /tmp/script.before.1 /tmp/script.after.1
$ diff -u /tmp/report.before.2 /tmp/report.after.2
--- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300
+++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300
@@ -352,5 +352,5 @@
#
-# (Tip: Generate a script for your data: perf script -g <lang>)
+# (Tip: Treat branches as callchains: perf report --branch-history)
#
$ diff -u /tmp/script.before.2 /tmp/script.after.2
$ diff -u /tmp/report.before.3 /tmp/report.after.3
--- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300
+++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300
@@ -22,5 +22,5 @@
#
-# (Tip: Order by the overhead of source file name and line number: perf report -s srcline)
+# (Tip: List events using substring match: perf list <keyword>)
#
$ diff -u /tmp/script.before.3 /tmp/script.after.3
$
Cool, just the 'perf report' tips changed, QED.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The CONFIG_SND_PXA2XX_AC97 driver is for the old AC97 bus implementation,
and conflicts with all the new-style AC97 drivers after the conversion,
so the drivers we want all get turned off.
Not disabling the symbol however does the right thing, and we get
the drivers that are selectively enabled here.
Fixes: 25540f68c871 ("ASoC: pxa: change ac97 dependencies")
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE driver
- dual license for optee_msg.h and optee_smc.h
Generic
- add cancellation support to client interface
* tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: update optee_msg.h and optee_smc.h to dual license
tee: add cancellation support to client interface
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
OP-TEE driver
- add missing of_node_put after of_device_is_available
* tag 'tee-fix-for-v5.0' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: add missing of_node_put after of_device_is_available
|
