summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-11-04can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculationMarc Kleine-Budde
Commit b8e0ddd36ce9 ("can: mcp251xfd: tef: prepare to workaround broken TEF FIFO tail index erratum") introduced mcp251xfd_get_tef_len() to get the number of unhandled transmit events from the Transmit Event FIFO (TEF). As the TEF has no head pointer, the driver uses the TX FIFO's tail pointer instead, assuming that send frames are completed. However the check for the TEF being full was not correct. This leads to the driver stop working if the TEF is full. Fix the TEF full check by assuming that if, from the driver's point of view, there are no free TX buffers in the chip and the TX FIFO is empty, all messages must have been sent and the TEF must therefore be full. Reported-by: Sven Schuchmann <schuchmann@schleissheimer.de> Closes: https://patch.msgid.link/FR3P281MB155216711EFF900AD9791B7ED9692@FR3P281MB1552.DEUP281.PROD.OUTLOOK.COM Fixes: b8e0ddd36ce9 ("can: mcp251xfd: tef: prepare to workaround broken TEF FIFO tail index erratum") Tested-by: Sven Schuchmann <schuchmann@schleissheimer.de> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20241104-mcp251xfd-fix-length-calculation-v3-1-608b6e7e2197@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-11-04can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing configuration when ↵Marc Kleine-Budde
switching CAN modes Since commit 50ea5449c563 ("can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode"), the current ring and coalescing configuration is passed to can_ram_get_layout(). That fixed the issue when switching between CAN-CC and CAN-FD mode with configured ring (rx, tx) and/or coalescing parameters (rx-frames-irq, tx-frames-irq). However 50ea5449c563 ("can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode"), introduced a regression when switching CAN modes with disabled coalescing configuration: Even if the previous CAN mode has no coalescing configured, the new mode is configured with active coalescing. This leads to delayed receiving of CAN-FD frames. This comes from the fact, that ethtool uses usecs = 0 and max_frames = 1 to disable coalescing, however the driver uses internally priv->{rx,tx}_obj_num_coalesce_irq = 0 to indicate disabled coalescing. Fix the regression by assigning struct ethtool_coalesce ec->{rx,tx}_max_coalesced_frames_irq = 1 if coalescing is disabled in the driver as can_ram_get_layout() expects this. Reported-by: https://github.com/vdh-robothania Closes: https://github.com/raspberrypi/linux/issues/6407 Fixes: 50ea5449c563 ("can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode") Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241025-mcp251xfd-fix-coalesing-v1-1-9d11416de1df@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-11-04can: rockchip_canfd: Drop obsolete dependency on COMPILE_TESTJean Delvare
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), OF can be enabled on all architectures. Therefore depending on COMPILE_TEST as an alternative is no longer needed. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20241022130439.70d016e9@endymion.delvare Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-11-04can: rockchip_canfd: CAN_ROCKCHIP_CANFD should depend on ARCH_ROCKCHIPGeert Uytterhoeven
The Rockchip CAN-FD controller is only present on Rockchip SoCs. Hence add a dependency on ARCH_ROCKCHIP, to prevent asking the user about this driver when configuring a kernel without Rockchip platform support. Fixes: ff60bfbaf67f219c ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://patch.msgid.link/a4b3c8c1cca9515e67adac83af5ba1b1fab2fcbc.1727169288.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-11-04can: c_can: fix {rx,tx}_errors statisticsDario Binacchi
The c_can_handle_bus_err() function was incorrectly incrementing only the receive error counter, even in cases of bit or acknowledgment errors that occur during transmission. The patch fixes the issue by incrementing the appropriate counter based on the type of error. Fixes: 881ff67ad450 ("can: c_can: Added support for Bosch C_CAN controller") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://patch.msgid.link/20241014135319.2009782-1-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-11-04can: m_can: m_can_close(): don't call free_irq() for IRQ-less devicesMarc Kleine-Budde
In commit b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt") support for IRQ-less devices was added. Instead of an interrupt, the interrupt routine is called by a hrtimer-based polling loop. That patch forgot to change free_irq() to be only called for devices with IRQs. Fix this, by calling free_irq() conditionally only if an IRQ is available for the device (and thus has been requested previously). Fixes: b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt") Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://patch.msgid.link/20240930-m_can-cleanups-v1-1-001c579cdee4@pengutronix.de Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-11-04can: {cc770,sja1000}_isa: allow building on x86_64Thomas Mühlbacher
The ISA variable is only defined if X86_32 is also defined. However, these drivers are still useful and in use on at least some modern 64-bit x86 industrial systems as well. With the correct module parameters, they work as long as IO port communication is possible, despite their name having ISA in them. Fixes: a29689e60ed3 ("net: handle HAS_IOPORT dependencies") Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net> Link: https://patch.msgid.link/20240919174151.15473-2-tmuehlbacher@posteo.net Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-11-04can: j1939: fix error in J1939 documentation.Alexander Hölzl
The description of PDU1 format usage mistakenly referred to PDU2 format. Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20241023145257.82709-1-alexander.hoelzl@gmx.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-11-04dm cache: fix potential out-of-bounds access on the first resumeMing-Hung Tsai
Out-of-bounds access occurs if the fast device is expanded unexpectedly before the first-time resume of the cache table. This happens because expanding the fast device requires reloading the cache table for cache_create to allocate new in-core data structures that fit the new size, and the check in cache_preresume is not performed during the first resume, leading to the issue. Reproduce steps: 1. prepare component devices: dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct 2. load a cache table of 512 cache blocks, and deliberately expand the fast device before resuming the cache, making the in-core data structures inadequate. dmsetup create cache --notable dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache 3. suspend the cache to write out the in-core dirty bitset and hint array, leading to out-of-bounds access to the dirty bitset at offset 0x40: dmsetup suspend cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80 Read of size 8 at addr ffffc90000085040 by task dmsetup/90 (...snip...) The buggy address belongs to the virtual mapping at [ffffc90000085000, ffffc90000087000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by checking the size change on the first resume. Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Joe Thornber <thornber@redhat.com>
2024-11-04dm cache: optimize dirty bit checking with find_next_bit when resizingMing-Hung Tsai
When shrinking the fast device, dm-cache iteratively searches for a dirty bit among the cache blocks to be dropped, which is less efficient. Use find_next_bit instead, as it is twice as fast as the iterative approach with test_bit. Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Joe Thornber <thornber@redhat.com>
2024-11-04dm cache: fix out-of-bounds access to the dirty bitset when resizingMing-Hung Tsai
dm-cache checks the dirty bits of the cache blocks to be dropped when shrinking the fast device, but an index bug in bitset iteration causes out-of-bounds access. Reproduce steps: 1. create a cache device of 1024 cache blocks (128 bytes dirty bitset) dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. shrink the fast device to 512 cache blocks, triggering out-of-bounds access to the dirty bitset (offset 0x80) dmsetup suspend cache dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0 Read of size 8 at addr ffffc900000f3080 by task dmsetup/131 (...snip...) The buggy address belongs to the virtual mapping at [ffffc900000f3000, ffffc900000f5000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by making the index post-incremented. Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Joe Thornber <thornber@redhat.com>
2024-11-04dm cache: fix flushing uninitialized delayed_work on cache_ctr errorMing-Hung Tsai
An unexpected WARN_ON from flush_work() may occur when cache creation fails, caused by destroying the uninitialized delayed_work waker in the error path of cache_create(). For example, the warning appears on the superblock checksum error. Reproduce steps: dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/urandom of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" Kernel logs: (snip) WARNING: CPU: 0 PID: 84 at kernel/workqueue.c:4178 __flush_work+0x5d4/0x890 Fix by pulling out the cancel_delayed_work_sync() from the constructor's error path. This patch doesn't affect the use-after-free fix for concurrent dm_resume and dm_destroy (commit 6a459d8edbdb ("dm cache: Fix UAF in destroy()")) as cache_dtr is not changed. Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Fixes: 6a459d8edbdb ("dm cache: Fix UAF in destroy()") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Joe Thornber <thornber@redhat.com>
2024-11-04dm cache: correct the number of origin blocks to match the target lengthMing-Hung Tsai
When creating a cache device, the actual size of the cache origin might be greater than the specified cache target length. In such case, the number of origin blocks should match the cache target length, not the full size of the origin device, since access beyond the cache target is not possible. This issue occurs when reducing the origin device size using lvm, as lvreduce preloads the new cache table before resuming the cache origin, which can result in incorrect sizes for the discard bitset and smq hotspot blocks. Reproduce steps: 1. create a cache device consists of 4096 origin blocks dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. reduce the cache origin to 2048 oblocks, in lvreduce's approach dmsetup reload corig --table "0 262144 linear /dev/sdc 262144" dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup suspend cache dmsetup suspend corig dmsetup suspend cdata dmsetup suspend cmeta dmsetup resume corig dmsetup resume cdata dmsetup resume cmeta dmsetup resume cache 3. shutdown the cache, and check the number of discard blocks in superblock. The value is expected to be 2048, but actually is 4096. dmsetup remove cache corig cdata cmeta dd if=/dev/sdc bs=1c count=8 skip=224 2>/dev/null | hexdump -e '1/8 "%u\n"' Fix by correcting the origin_blocks initialization in cache_create and removing the unused origin_sectors from struct cache_args accordingly. Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Fixes: c6b4fcbad044 ("dm: add cache target") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Joe Thornber <thornber@redhat.com>
2024-11-04dm-verity: don't crash if panic_on_corruption is not selectedMikulas Patocka
If the user sets panic_on_error and doesn't set panic_on_corruption, dm-verity should not panic on data mismatch. But, currently it panics, because it treats data mismatch as I/O error. This commit fixes the logic so that if there is data mismatch and panic_on_corruption or restart_on_corruption is not selected, the system won't restart or panic. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Fixes: f811b83879fb ("dm-verity: introduce the options restart_on_error and panic_on_error")
2024-11-04dm-unstriped: cast an operand to sector_t to prevent potential uint32_t overflowZichen Xie
This was found by a static analyzer. There may be a potential integer overflow issue in unstripe_ctr(). uc->unstripe_offset and uc->unstripe_width are defined as "sector_t"(uint64_t), while uc->unstripe, uc->chunk_size and uc->stripes are all defined as "uint32_t". The result of the calculation will be limited to "uint32_t" without correct casting. So, we recommend adding an extra cast to prevent potential integer overflow. Fixes: 18a5bf270532 ("dm: add unstriped target") Signed-off-by: Zichen Xie <zichenxie0106@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org
2024-11-04drm/xe/guc/tlb: Flush g2h worker in case of tlb timeoutNirmoy Das
Flush the g2h worker explicitly if TLB timeout happens which is observed on LNL and that points to the recent scheduling issue with E-cores on LNL. This is similar to the recent fix: commit e51527233804 ("drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout") and should be removed once there is E core scheduling fix. v2: Add platform check(Himal) v3: Remove gfx platform check as the issue related to cpu platform(John) Use the common WA macro(John) and print when the flush resolves timeout(Matt B) v4: Remove the resolves log and do the flush before taking pending_lock(Matt A) Cc: Badal Nilawar <badal.nilawar@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: stable@vger.kernel.org # v6.11+ Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2687 Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-3-nirmoy.das@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit e1f6fa55664a0eeb0a641f497e1adfcf6672e995) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-11-04drm/xe/ufence: Flush xe ordered_wq in case of ufence timeoutNirmoy Das
Flush xe ordered_wq in case of ufence timeout which is observed on LNL and that points to recent scheduling issue with E-cores. This is similar to the recent fix: commit e51527233804 ("drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout") and should be removed once there is a E-core scheduling fix for LNL. v2: Add platform check(Himal) s/__flush_workqueue/flush_workqueue(Jani) v3: Remove gfx platform check as the issue related to cpu platform(John) v4: Use the Common macro(John) and print when the flush resolves timeout(Matt B) Cc: Badal Nilawar <badal.nilawar@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: stable@vger.kernel.org # v6.11+ Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2754 Suggested-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-2-nirmoy.das@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 38c4c8722bd74452280951edc44c23de47612001) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-11-04drm/xe: Move LNL scheduling WA to xe_device.hNirmoy Das
Move LNL scheduling WA to xe_device.h so this can be used in other places without needing keep the same comment about removal of this WA in the future. The WA, which flushes work or workqueues, is now wrapped in macros and can be reused wherever needed. Cc: Badal Nilawar <badal.nilawar@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> cc: stable@vger.kernel.org # v6.11+ Suggested-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-1-nirmoy.das@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit cbe006a6492c01a0058912ae15d473f4c149896c) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-11-04drm/xe: Use the filelist from drm for ccs_mode changeBalasubramani Vivekanandan
Drop the exclusive client count tracking and use the filelist from the drm to track the active clients. This also ensures the clients created internally by the driver won't block changing the ccs mode. Fixes: ce8c161cbad4 ("drm/xe: Add ref counting for xe_file") Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008073628.377433-3-balasubramani.vivekanandan@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 1c35f1ed1fe3c649f8c16214d0d3dd828b5265d9) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-11-04drm/xe: Set mask bits for CCS_MODE registerBalasubramani Vivekanandan
CCS_MODE register requires setting mask bits from Xe2+ platforms. Set the mask bits unconditionally, as those bits are unused for older platforms. Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: stable@vger.kernel.org # v6.11+ Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008073628.377433-2-balasubramani.vivekanandan@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 23ea2c7572d4735ef66beb1e4feb8ae510b78247) [ Fix conflict with mmio refactors ] Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-11-04Merge tag 'thermal-v6.12-rc7' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux Merge thermal driver fixes for 6.12-rc7 from Daniel Lezcano: "- Remove a false lockdep backtrace in the LMh driver (Dmitry Baryshkov) - Fix sampling handler context ptr in the libthermal (Emil Dahl Juhl) - Remove the thermal soft link when doing a make clean. The link is created at compilation time (Zhang Jiao) - Accept thermal zone without trip points as stated in the bindings, otherwise the thermal zone fails to initialize (Icenowy Zheng)" * tag 'thermal-v6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/of: support thermal zones w/o trips subnode tools/lib/thermal: Remove the thermal.h soft link when doing make clean tools/lib/thermal: Fix sampling handler context ptr thermal/drivers/qcom/lmh: Remove false lockdep backtrace
2024-11-04nfs: avoid i_lock contention in nfs_clear_invalid_mappingMike Snitzer
Multi-threaded buffered reads to the same file exposed significant inode spinlock contention in nfs_clear_invalid_mapping(). Eliminate this spinlock contention by checking flags without locking, instead using smp_rmb and smp_load_acquire accordingly, but then take spinlock and double-check these inode flags. Also refactor nfs_set_cache_invalid() slightly to use smp_store_release() to pair with nfs_clear_invalid_mapping()'s smp_load_acquire(). While this fix is beneficial for all multi-threaded buffered reads issued by an NFS client, this issue was identified in the context of surprisingly low LOCALIO performance with 4K multi-threaded buffered read IO. This fix dramatically speeds up LOCALIO performance: before: read: IOPS=1583k, BW=6182MiB/s (6482MB/s)(121GiB/20002msec) after: read: IOPS=3046k, BW=11.6GiB/s (12.5GB/s)(232GiB/20001msec) Fixes: 17dfeb911339 ("NFS: Fix races in nfs_revalidate_mapping") Signed-off-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2024-11-04nfs_common: fix localio to cope with racing nfs_local_probe()Mike Snitzer
Fix the possibility of racing nfs_local_probe() resulting in: list_add double add: new=ffff8b99707f9f58, prev=ffff8b99707f9f58, next=ffffffffc0f30000. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:35! Add nfs_uuid_init() to properly initialize all nfs_uuid_t members (particularly its list_head). Switch to returning bool from nfs_uuid_begin(), returns false if nfs_uuid_t is already in-use (its list_head is on a list). Update nfs_local_probe() to return early if the nfs_client's cl_uuid (nfs_uuid_t) is in-use. Also, switch nfs_uuid_begin() from using list_add_tail_rcu() to list_add_tail() -- rculist was used in an earlier version of the localio code that had a lockless nfs_uuid_lookup interface. Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2024-11-04NFS: Further fixes to attribute delegation a/mtime changesTrond Myklebust
When asked to set both an atime and an mtime to the current system time, ensure that the setting is atomic by calling inode_update_timestamps() only once with the appropriate flags. Fixes: e12912d94137 ("NFSv4: Add support for delegated atime and mtime attributes") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2024-11-04NFS: Fix attribute delegation behaviour on exclusive createTrond Myklebust
When the client does an exclusive create and the server decides to store the verifier in the timestamps, a SETATTR is subsequently sent to fix up those timestamps. When that is the case, suppress the exceptions for attribute delegations in nfs4_bitmap_copy_adjust(). Fixes: 32215c1f893a ("NFSv4: Don't request atime/mtime/size if they are delegated to us") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2024-11-04nfs: Fix KMSAN warning in decode_getfattr_attrs()Roberto Sassu
Fix the following KMSAN warning: CPU: 1 UID: 0 PID: 7651 Comm: cp Tainted: G B Tainted: [B]=BAD_PAGE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) ===================================================== ===================================================== BUG: KMSAN: uninit-value in decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_generic+0x806/0xb00 nfs4_xdr_dec_getattr+0x1de/0x240 rpcauth_unwrap_resp_decode+0xab/0x100 rpcauth_unwrap_resp+0x95/0xc0 call_decode+0x4ff/0xb50 __rpc_execute+0x57b/0x19d0 rpc_execute+0x368/0x5e0 rpc_run_task+0xcfe/0xee0 nfs4_proc_getattr+0x5b5/0x990 __nfs_revalidate_inode+0x477/0xd00 nfs_access_get_cached+0x1021/0x1cc0 nfs_do_access+0x9f/0xae0 nfs_permission+0x1e4/0x8c0 inode_permission+0x356/0x6c0 link_path_walk+0x958/0x1330 path_lookupat+0xce/0x6b0 filename_lookup+0x23e/0x770 vfs_statx+0xe7/0x970 vfs_fstatat+0x1f2/0x2c0 __se_sys_newfstatat+0x67/0x880 __x64_sys_newfstatat+0xbd/0x120 x64_sys_call+0x1826/0x3cf0 do_syscall_64+0xd0/0x1b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The KMSAN warning is triggered in decode_getfattr_attrs(), when calling decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not initialized. Fix the issue by initializing fattr->mdsthreshold to NULL in nfs_fattr_init(). Cc: stable@vger.kernel.org # v3.5.x Fixes: 88034c3d88c2 ("NFSv4.1 mdsthreshold attribute xdr") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2024-11-04NFSv3: only use NFS timeout for MOUNT when protocols are compatibleNeilBrown
If a timeout is specified in the mount options, it currently applies to both the NFS protocol and (with v3) the MOUNT protocol. This is sensible when they both use the same underlying protocol, or those protocols are compatible w.r.t timeouts as RDMA and TCP are. However if, for example, NFS is using TCP and MOUNT is using UDP then using the same timeout doesn't make much sense. If you mount -o vers=3,proto=tcp,mountproto=udp,timeo=600,retrans=5 \ server:/path /mountpoint then the timeo=600 which was intended for the NFS/TCP request will apply to the MOUNT/UDP requests with the result that there will only be one request sent (because UDP has a maximum timeout of 60 seconds). This is not what a reasonable person might expect. This patch disables the sharing of timeout information in cases where the underlying protocols are not compatible. Fixes: c9301cb35b59 ("nfs: hornor timeo and retrans option when mounting NFSv3") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2024-11-04sunrpc: handle -ENOTCONN in xs_tcp_setup_socket()NeilBrown
xs_tcp_finish_connecting() can return -ENOTCONN but the switch statement in xs_tcp_setup_socket() treats that as an unhandled error. If we treat it as a known error it would propagate back to call_connect_status() which does handle that error code. This appears to be the intention of the commit (given below) which added -ENOTCONN as a return status for xs_tcp_finish_connecting(). So add -ENOTCONN to the switch statement as an error to pass through to the caller. Link: https://bugzilla.suse.com/show_bug.cgi?id=1231050 Link: https://access.redhat.com/discussions/3434091 Fixes: 01d37c428ae0 ("SUNRPC: xprt_connect() don't abort the task if the transport isn't bound") Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2024-11-04thermal/of: support thermal zones w/o trips subnodeIcenowy Zheng
Although the current device tree binding of thermal zones require the trips subnode, the binding in kernel v5.15 does not require it, and many device trees shipped with the kernel, for example, allwinner/sun50i-a64.dtsi and mediatek/mt8183-kukui.dtsi in ARM64, still comply to the old binding and contain no trips subnode. Allow the code to successfully register thermal zones w/o trips subnode for DT binding compatibility now. Furtherly, the inconsistency between DTs and bindings should be resolved by either adding empty trips subnode or dropping the trips subnode requirement. Fixes: d0c75fa2c17f ("thermal/of: Initialize trip points separately") Signed-off-by: Icenowy Zheng <uwu@icenowy.me> [wenst@chromium.org: Reworked logic and kernel log messages] Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20241018073139.1268995-1-wenst@chromium.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-11-04tools/lib/thermal: Remove the thermal.h soft link when doing make cleanzhang jiao
Run "make -C tools thermal" can create a soft link for thermal.h in tools/include/uapi/linux. Just rm it when make clean. Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20240912045031.18426-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-11-04tools/lib/thermal: Fix sampling handler context ptrEmil Dahl Juhl
The sampling handler, provided by the user alongside a void* context, was invoked with an internal structure instead of the user context. Correct the invocation of the sampling handler to pass the user context pointer instead. Note that the approach taken is similar to that in events.c, and will reduce the chances of this mistake happening if additional sampling callbacks are added. Fixes: 47c4b0de080a ("tools/lib/thermal: Add a thermal library") Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk> Link: https://lore.kernel.org/r/20241015171826.170154-1-emdj@bang-olufsen.dk Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-11-04thermal/drivers/qcom/lmh: Remove false lockdep backtraceDmitry Baryshkov
Annotate LMH IRQs with lockdep classes so that the lockdep doesn't report possible recursive locking issue between LMH and GIC interrupts. For the reference: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** Call trace: dump_backtrace+0x98/0xf0 show_stack+0x18/0x24 dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 print_deadlock_bug+0x258/0x348 __lock_acquire+0x1078/0x1f44 lock_acquire+0x1fc/0x32c _raw_spin_lock_irqsave+0x60/0x88 __irq_get_desc_lock+0x58/0x98 enable_irq+0x38/0xa0 lmh_enable_interrupt+0x2c/0x38 irq_enable+0x40/0x8c __irq_startup+0x78/0xa4 irq_startup+0x78/0x168 __enable_irq+0x70/0x7c enable_irq+0x4c/0xa0 qcom_cpufreq_ready+0x20/0x2c cpufreq_online+0x2a8/0x988 cpufreq_add_dev+0x80/0x98 subsys_interface_register+0x104/0x134 cpufreq_register_driver+0x150/0x234 qcom_cpufreq_hw_driver_probe+0x2a8/0x388 platform_probe+0x68/0xc0 really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x20c/0x62c worker_thread+0x1bc/0x36c kthread+0x120/0x124 ret_from_fork+0x10/0x20 Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241011-lmh-lockdep-v1-1-495cbbe6fef1@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-11-04MAINTAINERS: update AMD SPI maintainerRaju Rangoju
'Sanjay R Mehta' is no longer with AMD, I will take over as the maintainer of the AMD SPI driver moving forward. I request to be added as the new maintainer. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20241104062327.1228521-1-Raju.Rangoju@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-11-04ASoC: tas2781: Add new driver version for tas2563 & tas2781 qfn chipShenghao Ding
Add new driver version to support tas2563 & tas2781 qfn chip Signed-off-by: Shenghao Ding <shenghao-ding@ti.com> Link: https://patch.msgid.link/20241104100055.48-1-shenghao-ding@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-11-04Merge tag 'qcom-drivers-fixes-for-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for v6.12 The Qualcomm EDAC driver's configuration of interrupts is made optional, to avoid violating security constriants on X Elite platform . The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE, is corrected to handle the case where firmware successfully returns that the interface isn't supported. The GLINK driver and the PMIC GLINK interface is updated to handle buffer allocation issues during initialization of the communication channel. Allocation error handling in the socinfo dirver is corrected, and then the fix is corrected. * tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: pmic_glink: Handle GLINK intent allocation rejections rpmsg: glink: Handle rejected intent request better soc: qcom: socinfo: fix revision check in qcom_socinfo_probe() firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling EDAC/qcom: Make irq configuration optional firmware: qcom: scm: fix a NULL-pointer dereference firmware: qcom: scm: suppress download mode error soc: qcom: Add check devm_kasprintf() returned value MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-11-04platform/x86: ideapad-laptop: add missing Ideapad Pro 5 fn keysRenato Caldas
The scancodes for the Mic Mute and Airplane keys on the Ideapad Pro 5 (14AHP9 at least, probably the other variants too) are different and were not being picked up by the driver. This adds them to the keymap. Apart from what is already supported, the remaining fn keys are unfortunately producing windows-specific key-combos. Signed-off-by: Renato Caldas <renato@calgera.com> Link: https://lore.kernel.org/r/20241102183116.30142-1-renato@calgera.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-11-04platform/x86: dell-wmi-base: Handle META key Lock/Unlock eventsKurt Borja
Some Alienware devices have a key that locks/unlocks the Meta key. This key triggers a WMI event that should be ignored by the kernel, as it's handled by internally the firmware. There is no known way of changing this default behavior. The firmware would lock/unlock the Meta key, regardless of how the event is handled. Tested on an Alienware x15 R1. Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20241031154441.6663-2-kuurtb@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-11-04platform/x86: dell-smbios-base: Extends support to Alienware productsKurt Borja
Fixes the following error: dell_smbios: Unable to run on non-Dell system Which is triggered after dell-wmi driver fails to initialize on Alienware systems, as it depends on dell-smbios. This effectively extends dell-wmi, dell-smbios and dcdbas support to Alienware devices, that might share some features of the SMBIOS intereface calling interface with other Dell products. Tested on an Alienware X15 R1. Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20241031154023.6149-2-kuurtb@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-11-04ALSA: firewire-lib: fix return value on fail in amdtp_tscm_init()Murad Masimov
If amdtp_stream_init() fails in amdtp_tscm_init(), the latter returns zero, though it's supposed to return error code, which is checked inside init_stream() in file tascam-stream.c. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 47faeea25ef3 ("ALSA: firewire-tascam: add data block processing layer") Signed-off-by: Murad Masimov <m.masimov@maxima.ru> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20241101185517.1819-1-m.masimov@maxima.ru
2024-11-04ALSA: ump: Don't enumeration invalid groups for legacy rawmidiTakashi Iwai
The legacy rawmidi tries to enumerate all possible UMP groups belonging to the UMP endpoint. But currently it shows all 16 ports when the UMP endpoint is configured with static blocks, although most of them may be unused. There was already a fix for the sequencer client side to ignore such groups in the commit 3bfd7c0ba184 ("ALSA: seq: ump: Skip useless ports for static blocks"), and this commit is a similar fix for UMP rawmidi devices; it adds simply the check for the validity of each group that has been already parsed. (Note that the group info was moved to snd_ump_endpoint.groups[] by the commit 0642a3c5cacc0321c755 ("ALSA: ump: Update substream name from assigned FB names")). Link: https://patch.msgid.link/20241104100735.16127-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-11-04platform/x86/amd/pmc: Detect when STB is not availableCorey Hickey
Loading the amd_pmc module as: amd_pmc enable_stb=1 ...can result in the following messages in the kernel ring buffer: amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340 Further debugging reveals that this occurs when the requests for S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0, indicating that the STB is inaccessible. To prevent the ioremap warning and provide clarity to the user, handle the invalid address and display an error message. Link: https://lore.kernel.org/platform-driver-x86/c588ff5d-3e04-4549-9a86-284b9b4419ba@amd.com Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Corey Hickey <bugfood-c@fatooh.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20241028180241.1341624-1-bugfood-ml@fatooh.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-11-04platform/x86/amd/pmf: Add SMU metrics table support for 1Ah family 60h modelShyam Sundar S K
Add SMU metrics table support for 1Ah family 60h model. This information will be used by the PMF driver to alter the system thermals. Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20241023063245.1404420-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-11-04drm/imagination: Break an object reference loopBrendan King
When remaining resources are being cleaned up on driver close, outstanding VM mappings may result in resources being leaked, due to an object reference loop, as shown below, with each object (or set of objects) referencing the object below it: PVR GEM Object GPU scheduler "finished" fence GPU scheduler “scheduled” fence PVR driver “done” fence PVR Context PVR VM Context PVR VM Mappings PVR GEM Object The reference that the PVR VM Context has on the VM mappings is a soft one, in the sense that the freeing of outstanding VM mappings is done as part of VM context destruction; no reference counts are involved, as is the case for all the other references in the loop. To break the reference loop during cleanup, free the outstanding VM mappings before destroying the PVR Context associated with the VM context. Signed-off-by: Brendan King <brendan.king@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Reviewed-by: Frank Binns <frank.binns@imgtec.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/8a25924f-1bb7-4d9a-a346-58e871dfb1d1@imgtec.com
2024-11-04drm/imagination: Add a per-file PVR context listBrendan King
This adds a linked list of VM contexts which is needed for the next patch to be able to correctly track VM contexts for destruction on file close. It is only safe for VM contexts to be removed from the list and destroyed when not in interrupt context. Signed-off-by: Brendan King <brendan.king@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Reviewed-by: Frank Binns <frank.binns@imgtec.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/e57128ea-f0ce-4e93-a9d4-3f033a8b06fa@imgtec.com
2024-11-03smb: client: Fix use-after-free of network namespace.Kuniyuki Iwashima
Recently, we got a customer report that CIFS triggers oops while reconnecting to a server. [0] The workload runs on Kubernetes, and some pods mount CIFS servers in non-root network namespaces. The problem rarely happened, but it was always while the pod was dying. The root cause is wrong reference counting for network namespace. CIFS uses kernel sockets, which do not hold refcnt of the netns that the socket belongs to. That means CIFS must ensure the socket is always freed before its netns; otherwise, use-after-free happens. The repro steps are roughly: 1. mount CIFS in a non-root netns 2. drop packets from the netns 3. destroy the netns 4. unmount CIFS We can reproduce the issue quickly with the script [1] below and see the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled. When the socket is TCP, it is hard to guarantee the netns lifetime without holding refcnt due to async timers. Let's hold netns refcnt for each socket as done for SMC in commit 9744d2bf1976 ("smc: Fix use-after-free in tcp_write_timer_handler()."). Note that we need to move put_net() from cifs_put_tcp_session() to clean_demultiplex_info(); otherwise, __sock_create() still could touch a freed netns while cifsd tries to reconnect from cifs_demultiplex_thread(). Also, maybe_get_net() cannot be put just before __sock_create() because the code is not under RCU and there is a small chance that the same address happened to be reallocated to another netns. [0]: CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting... CIFS: Serverclose failed 4 times, giving up Unable to handle kernel paging request at virtual address 14de99e461f84a07 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [14de99e461f84a07] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1 Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018 pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : fib_rules_lookup+0x44/0x238 lr : __fib_lookup+0x64/0xbc sp : ffff8000265db790 x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01 x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580 x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500 x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002 x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294 x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0 x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500 Call trace: fib_rules_lookup+0x44/0x238 __fib_lookup+0x64/0xbc ip_route_output_key_hash_rcu+0x2c4/0x398 ip_route_output_key_hash+0x60/0x8c tcp_v4_connect+0x290/0x488 __inet_stream_connect+0x108/0x3d0 inet_stream_connect+0x50/0x78 kernel_connect+0x6c/0xac generic_ip_connect+0x10c/0x6c8 [cifs] __reconnect_target_unlocked+0xa0/0x214 [cifs] reconnect_dfs_server+0x144/0x460 [cifs] cifs_reconnect+0x88/0x148 [cifs] cifs_readv_from_socket+0x230/0x430 [cifs] cifs_read_from_socket+0x74/0xa8 [cifs] cifs_demultiplex_thread+0xf8/0x704 [cifs] kthread+0xd0/0xd4 Code: aa0003f8 f8480f13 eb18027f 540006c0 (b9401264) [1]: CIFS_CRED="/root/cred.cifs" CIFS_USER="Administrator" CIFS_PASS="Password" CIFS_IP="X.X.X.X" CIFS_PATH="//${CIFS_IP}/Users/Administrator/Desktop/CIFS_TEST" CIFS_MNT="/mnt/smb" DEV="enp0s3" cat <<EOF > ${CIFS_CRED} username=${CIFS_USER} password=${CIFS_PASS} domain=EXAMPLE.COM EOF unshare -n bash -c " mkdir -p ${CIFS_MNT} ip netns attach root 1 ip link add eth0 type veth peer veth0 netns root ip link set eth0 up ip -n root link set veth0 up ip addr add 192.168.0.2/24 dev eth0 ip -n root addr add 192.168.0.1/24 dev veth0 ip route add default via 192.168.0.1 dev eth0 ip netns exec root sysctl net.ipv4.ip_forward=1 ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1 touch ${CIFS_MNT}/a.txt ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE " umount ${CIFS_MNT} [2]: ref_tracker: net notrefcnt@000000004bbc008d has 1/1 users at sk_alloc (./include/net/net_namespace.h:339 net/core/sock.c:2227) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1576) generic_ip_connect (fs/smb/client/connect.c:3075) cifs_get_tcp_session.part.0 (fs/smb/client/connect.c:3160 fs/smb/client/connect.c:1798) cifs_mount_get_session (fs/smb/client/trace.h:959 fs/smb/client/connect.c:3366) dfs_mount_share (fs/smb/client/dfs.c:63 fs/smb/client/dfs.c:285) cifs_mount (fs/smb/client/connect.c:3622) cifs_smb3_do_mount (fs/smb/client/cifsfs.c:949) smb3_get_tree (fs/smb/client/fs_context.c:784 fs/smb/client/fs_context.c:802 fs/smb/client/fs_context.c:794) vfs_get_tree (fs/super.c:1800) path_mount (fs/namespace.c:3508 fs/namespace.c:3834) __x64_sys_mount (fs/namespace.c:3848 fs/namespace.c:4057 fs/namespace.c:4034 fs/namespace.c:4034) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-11-03Linux 6.12-rc6Linus Torvalds
2024-11-04tpm: Lock TPM chip in tpm_pm_suspend() firstJarkko Sakkinen
Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy according, as this leaves window for tpm_hwrng_read() to be called while the operation is in progress. The recent bug report gives also evidence of this behaviour. Aadress this by locking the TPM chip before checking any chip->flags both in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED check inside tpm_get_random() so that it will be always checked only when the lock is reserved. Cc: stable@vger.kernel.org # v6.4+ Fixes: 99d464506255 ("tpm: Prevent hwrng from activating during resume") Reported-by: Mike Seo <mikeseohyungjin@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219383 Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Mike Seo <mikeseohyungjin@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-11-03net: xilinx: axienet: Enqueue Tx packets in dql before dmaengine startsSuraj Gupta
Enqueue packets in dql after dma engine starts causes race condition. Tx transfer starts once dma engine is started and may execute dql dequeue in completion before it gets queued. It results in following kernel crash while running iperf stress test: kernel BUG at lib/dynamic_queue_limits.c:99! <snip> Internal error: Oops - BUG: 00000000f2000800 [#1] SMP pc : dql_completed+0x238/0x248 lr : dql_completed+0x3c/0x248 Call trace: dql_completed+0x238/0x248 axienet_dma_tx_cb+0xa0/0x170 xilinx_dma_do_tasklet+0xdc/0x290 tasklet_action_common+0xf8/0x11c tasklet_action+0x30/0x3c handle_softirqs+0xf8/0x230 <snip> Start dmaengine after enqueue in dql fixes the crash. Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support") Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com> Link: https://patch.msgid.link/20241030062533.2527042-2-suraj.gupta2@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-03MAINTAINERS: Remove self from DSA entryFlorian Fainelli
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20241031173332.3858162-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-03net: enetc: allocate vf_state during PF probesWei Fang
In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8 Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241031060247.1290941-2-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 02:09:26 +0000