| Age | Commit message (Collapse) | Author |
|---|
|
There is a race condition in the CMT interrupt handler. In the interrupt
handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This
flag is used to indicate any call to set_next_event() should not be
directly propagated to the device, but instead cached. This is done as
the interrupt handler itself reprograms the device when needed before it
completes and this avoids this operation to take place twice.
It is unclear why this design was chosen, my suspicion is to allow the
struct clock_event_device.event_handler callback, which is called while
the FLAG_IRQCONTEXT is set, can update the next event without having to
write to the device twice.
Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is
set and later cleared where the interrupt handler have already started to
write the next event to the device. If set_next_event() is called in
this window the value is only cached in the driver but not written. This
leads to the board to misbehave, or worse lockup and produce a splat.
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: 0-...!: (0 ticks this GP) idle=f5e0/0/0x0 softirq=519/519 fqs=0 (false positive?)
rcu: (detected by 1, t=6502 jiffies, g=-595, q=77 ncpus=2)
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-rc5-arm64-renesas-00019-g74a6f86eaf1c-dirty #20
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tick_check_broadcast_expired+0xc/0x40
lr : cpu_idle_poll.isra.0+0x8c/0x168
sp : ffff800081c63d70
x29: ffff800081c63d70 x28: 00000000580000c8 x27: 00000000bfee5610
x26: 0000000000000027 x25: 0000000000000000 x24: 0000000000000000
x23: ffff00007fbb9100 x22: ffff8000818f1008 x21: ffff8000800ef07c
x20: ffff800081c79ec0 x19: ffff800081c70c28 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffc2c717d8
x14: 0000000000000000 x13: ffff000009c18080 x12: ffff8000825f7fc0
x11: 0000000000000000 x10: ffff8000818f3cd4 x9 : 0000000000000028
x8 : ffff800081c79ec0 x7 : ffff800081c73000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : ffff7ffffe286000 x3 : 0000000000000000
x2 : ffff7ffffe286000 x1 : ffff800082972900 x0 : ffff8000818f1008
Call trace:
tick_check_broadcast_expired+0xc/0x40
do_idle+0x9c/0x280
cpu_startup_entry+0x34/0x40
kernel_init+0x0/0x11c
do_one_initcall+0x0/0x260
__primary_switched+0x80/0x88
rcu: rcu_preempt kthread timer wakeup didn't happen for 6501 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=0 timer-softirq=262
rcu: rcu_preempt kthread starved for 6502 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 flags:0x00000008
Call trace:
__switch_to+0xbc/0x100
__schedule+0x358/0xbe0
schedule+0x48/0x148
schedule_timeout+0xc4/0x138
rcu_gp_fqs_loop+0x12c/0x764
rcu_gp_kthread+0x208/0x298
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
The design have been part of the driver since it was first merged in
early 2009. It becomes increasingly harder to trigger the issue the
older kernel version one tries. It only takes a few boots on v6.10-rc5,
while hundreds of boots are needed to trigger it on v5.10.
Close the race condition by using the CMT channel lock for the two
competing sections. The channel lock was added to the driver after its
initial design.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240702190230.3825292-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The 'err' variable is initialized whatever the code path, it is
pointless to initialize it when it is declared.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240705052159.22235-1-kunyu@nfschina.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The irq variable is initialized whatever the code path, it is poinless
to initialize when declaring it.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240705040729.21961-1-kunyu@nfschina.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
If polling_delay is nonzero and passive_delay is greater than
polling_delay, the thermal zone temperature will be updated less
often when tz->passive is nonzero, which is not as expected. Make
the thermal zone registration fail with -EINVAL in that case as
this is a clear thermal zone configuration mistake.
If polling_delay is nonzero and passive_delay is 0, which is regarded
as a valid thermal zone configuration, the thermal zone will use polling
except when tz->passive is nonzero. However, the expected behavior in
that case is to continue temperature polling with the same delay value
regardless of tz->passive, so set passive_delay to the polling_delay
value then.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/5802156.DvuYhMxLoT@rjwysocki.net
|
|
Because __thermal_zone_get_trip() is only called by thermal_zone_get_trip()
now, fold the former into the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/22339769.EfDdHjke4D@rjwysocki.net
|
|
Out of several drivers implementing the .set_trip_temp() thermal zone
operation, three don't actually use the trip ID argument passed to it,
two call __thermal_zone_get_trip() to get a struct thermal_trip
corresponding to the given trip ID, and the other use the trip ID as an
index into their own data structures with the assumption that it will
always match the ordering of entries in the trips table passed to the
core during thermal zone registration, which is fragile and not really
guaranteed.
Even though the trip IDs used by the core are in fact their indices in the
trips table passed to it by the thermal zone creator, that is purely a
matter of convenience and should not be relied on for correctness.
For this reason, modify trip_point_temp_store() to pass a (const) trip
pointer to .set_trip_temp() and adjust the drivers implementing it
accordingly.
This helps to simplify the drivers invoking __thermal_zone_get_trip()
from their .set_trip_temp() callback functions because they will not
need to do it now and the other drivers can store their internal
trip indices in the priv field in struct thermal_trip and their
.set_trip_temp() callback functions can get those indices from there.
The intel_quark_dts thermal driver can instead use the trip type to
determine the requisite trip index.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8392906.T7Z3S40VBb@rjwysocki.net
[ rjw: Add missing colon and 2 empty code lines ]
[ rjw: Add missing change in imx_thermal.c and adjust the changelog ]
[ rjw: Drop an unused local variable ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Srujana Challa says:
====================
Fixes for CPT and RSS configuration
This series of patches fixes various issues related to CPT
configuration and RSS configuration.
v1->v2:
- Excluded the patch "octeontx2-af: reduce cpt flt interrupt vectors for
cn10kb" to submit it to net-next.
- Addressed the review comments.
Kiran Kumar K (1):
octeontx2-af: Fix issue with IPv6 ext match for RSS
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While performing RSS based on IPv4, packets with
IPv4 options are not being considered. Adding changes
to match both plain IPv4 and IPv4 with option header.
Fixes: 41a7aa7b800d ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While performing RSS based on IPv6, extension ltype
is not being considered. This will be problem for
fragmented packets or packets with extension header.
Adding changes to match IPv6 ext header along with IPv6
ltype.
Fixes: 41a7aa7b800d ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Checksum and length checks are not enabled for IPv4 header with
options and IPv6 with extension headers.
To fix this a change in enum npc_kpu_lc_ltype is required which will
allow adjustment of LTYPE_MASK to detect all types of IP headers.
Fixes: 21e6699e5cd6 ("octeontx2-af: Add NPC KPU profile")
Signed-off-by: Michal Mazur <mmazur2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes CPT_LF_ALLOC mailbox error due to
incompatible mailbox message format. Specifically, it
corrects the `blkaddr` field type from `int` to `u8`.
Fixes: de2854c87c64 ("octeontx2-af: Mailbox changes for 98xx CPT block")
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace slot id with global CPT lf id on reg read/write as
CPTPF/VF driver would send slot number instead of global
lf id in the reg offset. And also update the mailbox response
with the global lf's register offset.
Fixes: ae454086e3c2 ("octeontx2-af: add mailbox interface for CPT")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we encounter an error on i2c packet transmit, we won't have a valid
flow anymore; since we didn't transmit a valid packet sequence, we'll
have to wait for the key to timeout instead of dropping it on the reply.
This causes the i2c lock to be held for longer than necessary.
Instead, invalidate the flow on TX error, and release the i2c lock
immediately.
Cc: Bonnie Lo <Bonnie_Lo@wiwynn.com>
Tested-by: Jerry C Chen <Jerry_C_Chen@wiwynn.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
FREESCALE SOC DRIVERS has been orphaned since
commit eaac25d026a1 ("MAINTAINERS: Drop Li Yang as their email address
stopped working")
QUICC ENGINE LIBRARY has Qiang Zhao as maintainer but he hasn't
responded for years and when Li Yang was still maintaining FREESCALE
SOC DRIVERS he was also handling QUICC ENGINE LIBRARY directly.
As a maintainer of LINUX FOR POWERPC EMBEDDED PPC8XX AND PPC83XX, I
also need FREESCALE SOC DRIVERS to be actively maintained, so add
myself as maintainer of FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY.
See below link for more context.
Link: https://lore.kernel.org/linuxppc-dev/20240219153016.ntltc76bphwrv6hn@skbuf/T/#mf6d4a5eef79e8eae7ae0456a2794c01e630a6756
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are many generations of omaps to maintain, and I will be only active
as a hobbyist with time permitting. Let's add more maintainers to ensure
continued Linux support.
TI is interested in maintaining the active SoCs such as am3, am4 and
dra7. And the hobbyists are interested in maintaining some of the older
devices, mainly based on omap3 and 4 SoCs.
Kevin and Roger have agreed to maintain the active TI parts. Both Kevin
and Roger have been working on the omap variants for a long time, and
have a good understanding of the hardware.
Aaro and Andreas have agreed to maintain the community devices. Both Aaro
and Andreas have long experience on working with the earlier TI SoCs.
While at it, let's also change me to be a reviewer for the omap1, and
drop the link to my old omap web page.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'sdhci-esdhc-imx' driver
Since NXP S32G2 and S32G3 SoCs share the SDHCI controller with
I.MX platforms it would be valuable to add 's32@nxp.com' as a
relevant mailing list in this area.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20240708121018.246476-4-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The I.MX SDHCI driver assumes that the frequency of the 'per' clock
can be obtained even on disabled clocks, which is not always the case.
According to 'clk_get_rate' documentation, it is only valid
once the clock source has been enabled.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-3-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In case of S32G based platforms, GPIO CD used for card detect
wake mechanism is not available.
For this scenario the newly introduced flag
'ESDHC_FLAG_SKIP_CD_WAKE' is used.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Lenovo Yoga C630 Embedded Controller is only present on the Qualcomm
Snapdragon-based Lenovo Yoga C630 laptop. Hence add a dependency on
ARCH_QCOM, to prevent asking the user about this driver when configuring
a kernel without Qualcomm SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/0e4c9ffdc8a5caffcda2afb8d5480900f7adebf6.1720707932.git.geert+renesas@glider.be
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Acer Aspire 1 Embedded Controller is only present on the Qualcomm
Snapdragon-based Acer Aspire 1 laptop. Hence add a dependency on
ARCH_QCOM, to prevent asking the user about this driver when configuring
a kernel without Qualcomm SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/f5f38709c01d369ed9e375ceb2a9a12986457a1a.1720707932.git.geert+renesas@glider.be
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
While efi_memory_attributes_table_t::entry isn't used directly as an
array, it is used as a base for pointer arithmetic. The type is wrong
as it's not technically an array of efi_memory_desc_t's; they could be
larger. Regardless, leave the type unchanged and remove the old style
"0" array size. Additionally replace the open-coded entry offset code
with the existing efi_memdesc_ptr() helper.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The "early" part of the helper's name isn't accurate[1]. Drop it in
preparation for adding a new (not early) usage.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/lkml/CAMj1kXEyDjH0uu3Z4eBesV3PEnKGi5ArXXMp7R-hn8HdRytiPg@mail.gmail.com [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit 9a427556fb8e ("vmlinux.lds.h: catch compound literals into
data and BSS") added catches for .data..L* and .rodata..L* but missed
.bss..L*
Since commit 5431fdd2c181 ("ptrace: Convert ptrace_attach() to use
lock guards") the following appears at build:
LD .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
Lets add .bss..L* to BSS_MAIN macro to catch those sections into BSS.
Fixes: 9a427556fb8e ("vmlinux.lds.h: catch compound literals into data and BSS")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404031349.nmKhyuUG-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The to-be-fixed commit rightfully prevented that the registers will be
cleared. However, the index must be cleared. Otherwise a read message
will re-issue the last work. Fix it and add a comment describing the
situation.
Fixes: c422b6a63024 ("i2c: testunit: don't erase registers after STOP")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
esp_xmit() is already able to handle UDP encapsulation through the call to
esp_output_head(). However, the ESP header and the outer IP header
are not correct and need to be corrected.
Test: Enabled both dir=in/out IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If xfrm_input() is called with UDP_ENCAP_ESPINUDP, the packet is
already processed in UDP layer that removes the UDP header.
Therefore, there should be no much difference to treat it as an
ESP packet in the XFRM stack.
Test: Enabled dir=in IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Unblock this limitation so that SAs with encapsulation specified
can be passed to HW drivers. HW drivers can still reject the SA
in their implementation of xdo_dev_state_add if the encapsulation
is not supported.
Test: Verified on Android device
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
IPsec crypt offload supports outbound IPv6 ESP packets, but it doesn't
support inbound IPv6 ESP packets.
This change enables the crypto offload for inbound IPv6 ESP packets
that are not handled through GRO code path. If HW drivers add the
offload information to the skb, the packet will be handled in the
crypto offload rx code path.
Apart from the change in crypto offload rx code path, the change
in xfrm_policy_check is also needed.
Exampe of RX data path:
+-----------+ +-------+
| HW Driver |-->| wlan0 |--------+
+-----------+ +-------+ |
v
+---------------+ +------+
+------>| Network Stack |-->| Apps |
| +---------------+ +------+
| |
| v
+--------+ +------------+
| ipsec1 |<--| XFRM Stack |
+--------+ +------------+
Test: Enabled both in/out IPsec crypto offload, and verified IPv6
ESP packets on Android device on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-07-11:
amdgpu:
- PSR-SU fix
- Reseved VMID fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240712005534.803064-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Use write-back caching mode for system memory on DGFX (Thomas)
Driver Changes:
- Do not leak object when finalizing hdcp gsc (Nirmoy)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/vgqz35btnxdddko3byrgww5ii36wig2tvondg2p3j3b3ourj4i@rqgolll3wwkh
|
|
When handling colliding L2TPv3 session IDs, we use the existing
session IDR entry and link the new session on that using
session->coll_list. However, when using an existing IDR entry, we must
not do the idr_replace step.
Fixes: aa5e17e1f5ec ("l2tp: store l2tpv3 sessions in per-net IDR")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
link_is_up() and tipc_link_is_up() have the same functionality.
Consolidate these functions.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct tipc_name_table in core.h is not used. Remove this declaration.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Breno Leitao says:
====================
netconsole: improve code clarity
These changes aim to enhance the reliability of netconsole by
eliminating the potential race condition and improve maintainability
by making the code more straightforward to understand and modify.
====================
Link: https://patch.msgid.link/20240709144403.544099-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When disabling a netconsole target, enabled_store() is called with
enabled=false. Currently, this results in updating the nt->enabled
field twice:
1. Inside the if/else block, with the target_list_lock spinlock held
2. Later, without the target_list_lock
This patch eliminates the redundancy by setting the field only once,
improving efficiency and reducing potential race conditions.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240709144403.544099-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'enabled' variable is already a bool, so casting it to its value
is redundant.
Remove the superfluous cast, improving code clarity without changing
functionality.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240709144403.544099-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are a couple of places where the test script "sleep"s to wait for
some external condition to be met.
This is error prone, specially in slow systems (identified in CI by
"KSFT_MACHINE_SLOW=yes").
To fix this, add a "ovs_wait" function that tries to execute a command
a few times until it succeeds. The timeout used is set to 5s for
"normal" systems and doubled if a slow CI machine is detected.
This should make the following work:
$ vng --build \
--config tools/testing/selftests/net/config \
--config kernel/configs/debug.config
$ vng --run . --user root -- "make -C tools/testing/selftests/ \
KSFT_MACHINE_SLOW=yes TARGETS=net/openvswitch run_tests"
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20240710090500.1655212-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In fact, this structure contains a flexible array at the end, but
historically its size, alignment etc., is calculated manually.
There are several instances of the structure embedded into other
structures, but also there's ongoing effort to remove them and we
could in the meantime declare &net_device properly.
Declare the array explicitly, use struct_size() and store the array
size inside the structure, so that __counted_by() can be applied.
Don't use PTR_ALIGN(), as SLUB itself tries its best to ensure the
allocated buffer is aligned to what the user expects.
Also, change its alignment from %NETDEV_ALIGN to the cacheline size
as per several suggestions on the netdev ML.
bloat-o-meter for vmlinux:
free_netdev 445 440 -5
netdev_freemem 24 - -24
alloc_netdev_mqs 1481 1450 -31
On x86_64 with several NICs of different vendors, I was never able to
get a &net_device pointer not aligned to the cacheline size after the
change.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240710113036.2125584-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A typo makes PSAMPLE_ATTR_SAMPLE_RATE netlink flag be added to the wrong
sk_buff.
Fix the error and make the input sk_buff pointer "const" so that it
doesn't happen again.
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Fixes: 7b1b2b60c63f ("net: psample: allow using rate as probability")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20240710171004.2164034-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To have enough space to write all possible sprintf() args. Currently
'name' size is 16, but the first '%s' specifier may already need at
least 16 characters, since 'bnad->netdev->name' is used there.
For '%d' specifiers, assume that they require:
* 1 char for 'tx_id + tx_info->tcb[i]->id' sum, BNAD_MAX_TXQ_PER_TX is 8
* 2 chars for 'rx_id + rx_info->rx_ctrl[i].ccb->id', BNAD_MAX_RXP_PER_RX
is 16
And replace sprintf with snprintf.
Detected using the static analysis tool - Svace.
Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change caused PSR SU panels to not read from their remote fb,
preventing us from entering self-refresh. It is a regression.
This reverts commit 6b8487cdf9fc7bae707519ac5b5daeca18d1e85b.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove wrong EIO to EGAIN conversion and pass all errors as is.
After commit 230f3d53a547 ("i40e: remove i40e_status"), which should only
replace F/W specific error codes with Linux kernel generic, all EIO errors
suddenly started to be converted into EAGAIN which leads nvmupdate to retry
until it timeouts and sometimes fails after more than 20 minutes in the
middle of NVM update, so NVM becomes corrupted.
The bug affects users only at the time when they try to update NVM, and
only F/W versions that generate errors while nvmupdate. For example, X710DA2
with 0x8000ECB7 F/W is affected, but there are probably more...
Command for reproduction is just NVM update:
./nvmupdate64
In the log instead of:
i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM)
appears:
i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM
i40e: eeprom check failed (-5), Tx/Rx traffic disabled
The problematic code did silently convert EIO into EAGAIN which forced
nvmupdate to ignore EAGAIN error and retry the same operation until timeout.
That's why NVM update takes 20+ minutes to finish with the fail in the end.
Fixes: 230f3d53a547 ("i40e: remove i40e_status")
Co-developed-by: Kelvin Kang <kelvin.kang@intel.com>
Signed-off-by: Kelvin Kang <kelvin.kang@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
* tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits)
wifi: mac80211: fix AP chandef capturing in CSA
wifi: iwlwifi: correctly reference TSO page information
wifi: mt76: mt792x: fix scheduler interference in drv own process
wifi: mt76: mt7925: enabling MLO when the firmware supports it
wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info
wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO
wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO
wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO
wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx
wifi: mt76: add def_wcid to struct mt76_wcid
wifi: mt76: mt7925: report link information in rx status
wifi: mt76: mt7925: update rate index according to link id
wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change
...
====================
Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When user submits a rxfh set command without touching XFRM_SYM_XOR,
rxfh.input_xfrm is set to RXH_XFRM_NO_CHANGE, which is equal to 0xff.
Testing if (rxfh.input_xfrm & RXH_XFRM_SYM_XOR &&
!ops->cap_rss_sym_xor_supported)
return -EOPNOTSUPP;
Will always be true on devices that don't set cap_rss_sym_xor_supported,
since rxfh.input_xfrm & RXH_XFRM_SYM_XOR is always true, if input_xfrm
was not set, i.e RXH_XFRM_NO_CHANGE=0xff, which will result in failure
of any command that doesn't require any change of XFRM, e.g RSS context
or hash function changes.
To avoid this breakage, test if rxfh.input_xfrm != RXH_XFRM_NO_CHANGE
before testing other conditions. Note that the problem will only trigger
with XFRM-aware userspace, old ethtool CLI would continue to work.
Fixes: 0dd415d15505 ("net: ethtool: add a NO_CHANGE uAPI for new RXFH's input_xfrm")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20240710225538.43368-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IFLA_MAX is increasing slowly but surely.
Some compilers use more than 512 bytes of stack in rtnetlink_rcv_msg()
because it calls rtnl_calcit() for RTM_GETLINK message.
Use noinline_for_stack attribute to not inline rtnl_calcit(),
and directly use nla_for_each_attr_type() (Jakub suggestion)
because we only care about IFLA_EXT_MASK at this stage.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240710151653.3786604-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709072838.1152880-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
btree_root_lock is for the root keys in btree_root, not the pointers to
the nodes themselves; this fixes a lock ordering issue between
btree_root_lock and btree node locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
proper lock ordering is: fs_reclaim -> btree node locks
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
not using unlock_long() blocks key cache reclaim, and the allocator may
take awhile
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This reverts commit 86d81ec5f5f05846c7c6e48ffb964b24cba2e669.
This wasn't tested with memcg enabled, it immediately hits a null ptr
deref in list_lru_add().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
