| Age | Commit message (Collapse) | Author |
|---|
|
Driver unconditionally saves current state on first init in
dsi_pll_10nm_init(), but does not save the VCO rate, only some of the
divider registers. The state is then restored during probe/enable via
msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() ->
dsi_10nm_pll_restore_state().
Restoring calls dsi_pll_10nm_vco_set_rate() with
pll_10nm->vco_current_rate=0, which basically overwrites existing rate of
VCO and messes with clock hierarchy, by setting frequency to 0 to clock
tree. This makes anyway little sense - VCO rate was not saved, so
should not be restored.
If PLL was not configured configure it to minimum rate to avoid glitches
and configuring entire in clock hierarchy to 0 Hz.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: a4ccc37693a2 ("drm/msm/dsi_pll_10nm: restore VCO rate during
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/654796/
Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Type-C DisplayPort inoperable due to incorrect porch settings.
- Re-used wide_bus_en as flag to prevent porch shifting
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/636945/
Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-2-4954e51458f4@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The unnecessary symbols for imply are SND_SOC_TAS2781_COMLIB,
SND_SOC_TAS2781_COMLIB_I2C, and SND_SOC_TAS2781_FMWLIB. They all used for
library compiling. All the symbols in the imply are used for codec driver
compiling.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250523131111.1884-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert mxs-audio-sgtl5000.txt to yaml format.
Additional changes:
- Add compatible string:
bluegiga,apx4devkit-sgtl5000
denx,m28evk-sgtl5000
fsl,imx28-mbmx28lc-sgtl500
- Remove audio-routing from required list.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/20250528165755.692264-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 7f1186a8d738661 ("ASoC: soc-dai: check return value at
snd_soc_dai_set_tdm_slot()") checks return value of
xlate_tdm_slot_mask() (A1)(A2).
/*
* ...
(Y) * TDM mode can be disabled by passing 0 for @slots. In this case @tx_mask,
* @rx_mask and @slot_width will be ignored.
* ...
*/
int snd_soc_dai_set_tdm_slot(...)
{
...
if (...)
(A1) ret = dai->driver->ops->xlate_tdm_slot_mask(...);
else
(A2) ret = snd_soc_xlate_tdm_slot_mask(...);
if (ret)
goto err;
...
}
snd_soc_xlate_tdm_slot_mask() (A2) will return -EINVAL if slots was 0 (X),
but snd_soc_dai_set_tdm_slot() allow to use it (Y).
(A) static int snd_soc_xlate_tdm_slot_mask(...)
{
...
if (!slots)
(X) return -EINVAL;
...
}
Call xlate_tdm_slot_mask() only if slots was non zero.
Reported-by: Giedrius Trainavičius <giedrius@blokas.io>
Closes: https://lore.kernel.org/r/CAMONXLtSL7iKyvH6w=CzPTxQdBECf++hn8RKL6Y4=M_ou2YHow@mail.gmail.com
Fixes: 7f1186a8d738661 ("ASoC: soc-dai: check return value at snd_soc_dai_set_tdm_slot()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/8734cdfx59.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No one is using hdac_hdmi_jack[_port]_init(). Remove it and its
related functions.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6v3j73q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All four Qualcomm SoC macro codecs define DAI IDs in an enum starting
with AIF_INVALID=0, which is nowhere used in the code thus actual DAI
IDs start from 1. Drivers do not have their own of_xlate_dai_name(),
thus snd_soc_get_dlc() expects the DTS to start numbering DAIs from 0,
which creates confusing debugging scenario, e.g. DTS should use
<&lpass_wsamacro 2> for WSA_MACRO_AIF_VI with dai->id=3.
This also wastes some space, because drivers allocate few arrays for all
DAIs and basically the [0] is never used.
Drop the confusing first AIF_INVALID DAI identifier so the enum with DAI
IDs will start from 0. This has little functional impact and does not
affect the ABI, except saving a few bytes of memory per driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250523121811.380045-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support connection between Intel AudioDSP and Realek 5640 codec
implement avs_rt5640 machine board driver. The codec chip is located on
I2C bus and the streaming occurs over I2S interface. A number of such
devices can be connected simultaneously to the platform. Majority of the
board's behavior is inherited from existing representatives such as
avs_rt274.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530142120.2944095-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To be more resilient to codec-detection failures when the hardware
powers on slowly, add retry mechanism to the device verification check.
Similar pattern is found throughout a number of Realtek codecs. Our
tests show that 60ms delay is sufficient to address readiness issues on
rt5640 chip.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Xinxin Wan <xinxin.wan@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530142120.2944095-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Registers 0xfa and 0xfb represent "General Control 1" and "General
Control 2" respectively.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530142120.2944095-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables the clocks for the
whole lifetime of the device. Moreover, it is no longer necessary to
unprepare and disable the clocks explicitly.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Acked-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/84bc40641d05596f1edf4f01d1e6aea16bdbeeb5.1749201126.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correcting the capture stream handling which was incorrectly setting
playback=true for capture streams.
The original code mistakenly set playback=true for capture streams,
causing incorrect behavior.
Fixes: cc78d1eaabad ("ASoC: rockchip: add Serial Audio Interface (SAI) driver")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Acked-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/c374aae92c177aaf42c0f1371eccdbc7e9615786.1749201126.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add tas5753 to ti,tas57xx devicetree bindings.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Link: https://patch.msgid.link/20250528-asoc-tas5753-support-v1-2-a50c3f6734ee@openpixelsystems.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for tas5753, device is similar to tas5733 but with added
headphone / line driver.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Link: https://patch.msgid.link/20250528-asoc-tas5753-support-v1-1-a50c3f6734ee@openpixelsystems.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Device has also VDD_PX supply, which should be acquired by the driver.
Regulator framework will provide a dummy supply, thus the change is
compatible with older DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-6-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document VDD_PX supply on WCD9390 and WCD9395 audio codecs, which was
missed in original posting.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-5-64d3cb60313b@linaro.org
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No need to store devm_gpiod_get() error code in temporary variable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-4-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop separate regulator get and enable in probe() path with
devm_regulator_bulk_get_enable(), which simplifies cleanup paths and
device remove().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-3-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop separate regulator get and enable in probe() path with
devm_regulator_bulk_get_enable(), which simplifies cleanup paths and
device remove().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-2-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop separate regulator get and enable in probe() path with
devm_regulator_bulk_get_enable(), which simplifies cleanup paths and
device remove().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-1-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When widebus was enabled for DisplayPort in commit c7c412202623
("drm/msm/dp: enable widebus on all relevant chipsets") it was clarified
that it is only supported on DPU 5.0.0 onwards which includes SC7180 on
DPU revision 6.2. However, this patch missed that the description
structure for SC7180 is also reused for SDM845 (because of identical
io_start address) which is only DPU 4.0.0, leading to a wrongly enbled
widebus feature and corruption on that platform.
Create a separate msm_dp_desc_sdm845 structure for this SoC compatible,
with the wide_bus_supported flag turned off.
Fixes: c7c412202623 ("drm/msm/dp: enable widebus on all relevant chipsets")
Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com>
[DB: reworded commit text following Marijn's suggestion]
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/636944/
Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-1-4954e51458f4@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
No one is using component->id.
One idea is we can re-use it as serial number for component.
But we have no usage, so far. Let's just remove it for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877c1suuna.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
fmt_single_name() requests "ind *id" and not allow NULL for it.
But sometimes we don't need it. Allow NULL.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qm8uunz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Qcom lpass is using component->id to keep DAI ID (A).
(S) static int lpass_platform_pcmops_open(
sruct snd_soc_component *component,
struct snd_pcm_substream *substream)
{ ^^^^^^^^^(B0)
...
(B1) struct snd_soc_pcm_runtime *soc_runtime = snd_soc_substream_to_rtd(substream);
(B2) struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(soc_runtime, 0);
...
(B3) unsigned int dai_id = cpu_dai->driver->id;
(A) component->id = dai_id;
...
}
This driver can get dai_id from substream (B0 - B3).
In this driver, below functions get dai_id from component->id (A).
(X) lpass_platform_pcmops_suspend()
(Y) lpass_platform_pcmops_resume()
(Z) lpass_platform_copy()
Here, (Z) can get it from substream (B0 - B3), don't need to use
component->id (A). On suspend/resume (X)(Y), dai_id can only be obtained
from component->id (A), because there is no substream (B0) in function
parameter.
But, component->id (A) itself should not be used for such purpose.
It is intilialized at snd_soc_component_initialize(), and parsed its ID
(= component->id) from device name (a).
int snd_soc_component_initialize(...)
{
...
if (!component->name) {
(a) component->name = fmt_single_name(dev, &component->id);
... ^^^^^^^^^^^^^
}
...
}
Unfortunately, current code is broken to start with.
There are many regmaps that the driver cares about, however its only
managing one (either dp or i2s) in component suspend/resume path.
I2S regmap is mandatory however other regmaps are setup based on flags
like "hdmi_port_enable" and "codec_dma_enable".
Correct thing for suspend/resume path to handle is by checking these
flags, instead of using component->id.
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a56ouuob.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The for_each_child_of_node_scoped() helper provides a scope-based
clean-up functionality to put the device_node automatically, and
as such, there is no need to call of_node_put() directly.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20250603055109.3154061-5-aichao@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The for_each_child_of_node_scoped() helper provides a scope-based
clean-up functionality to put the device_node automatically, and
as such, there is no need to call of_node_put() directly.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505210557.EpJig9BQ-lkp@intel.com/
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20250603055109.3154061-4-aichao@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The for_each_child_of_node_scoped() helper provides a scope-based
clean-up functionality to put the device_node automatically, and
as such, there is no need to call of_node_put() directly.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20250603055109.3154061-3-aichao@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'wcd_regmap_irq_chip' and 'jack' in 'struct wcd939x_priv' are not used
at all.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-8-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Member wcd938x_priv.variant is assigned in probe() function and used
immediately thereafter, thus it can be just a local variable for less
variables stored in 'struct wcd938x_priv' device-wide state.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-7-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'wcd_regmap_irq_chip' and 'jack' in 'struct wcd938x_priv' are not used
at all.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-6-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'wcd_regmap_irq_chip' and 'jack' in 'struct wcd937x_priv' are not used
at all.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-5-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Members wcd934x_codec.num_rx_port and num_tx_port are not read anywhere
after assignment, so they can be safely dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-4-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Member wcd9335_codec.sido_input_src is not read anywhere after
assignment, so it can be safely dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-3-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Static 'struct reg_default' array is not modified so can be changed to
const for more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-2-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Static arrays/structs for regmap configuration like 'struct
reg_default', 'struct reg_sequence' and others are not modified so can
be changed to const for more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-1-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a compatible for the QCM6490-based Fairphone 5 which can use this
machine driver.
As a note, QCM6490 RB3 board is using audioreach architecture while
Fairphone 5 uses pre-audioreach.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250507-fp5-dp-sound-v4-4-4098e918a29e@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for DisplayPort Jack events, so that user space can
configure the audio routing correctly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250507-fp5-dp-sound-v4-3-4098e918a29e@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sound machine drivers for Qualcomm SoCs can be reused across multiple
SoCs. But user space ALSA UCM files depend on the card driver name which
should be set per board/SoC.
Allow such customization by using driver match data as sound card driver
name. The QRB4210 RB2 gets its name set to "sm4250" as requested by
Srinivas Kandagatla, and since no (known) UCM has been written yet this
should not break anything.
Also while we're already touching these lines, sort the compatibles
alphabetically.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250507-fp5-dp-sound-v4-2-4098e918a29e@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Return the error code if pci_alloc_irq_vectors() fails. Don't return
success.
Fixes: b4608e944177 ("spi: spi-pci1xxxx: Fix Probe failure with Dual SPI instance with INTx interrupts")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/aEKvDrUxD19GWi0u@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
drivers/spi/spi-loongson-core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for SPI/Loongson.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250608142939.172108-1-chenhuacai@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the last transfer of a SPI message has the cs_change flag, the CS is kept
asserted after the message.
The next message can't use multi-mode because the CS will be briefly deasserted
before the first transfer.
Remove the early exit of the list_for_each_entry because the last transfer
actually needs to be always checked.
Fixes: d153ff4056cb ("spi: omap2-mcspi: Add support for MULTI-mode")
Signed-off-by: Félix Piédallu <felix.piedallu@non.se.com>
Link: https://patch.msgid.link/20250606-cs_change_fix-v1-2-27191a98a2e5@non.se.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
message
When the last transfer of a SPI message has the cs_change flag, the CS is kept
asserted after the message.
Multi-mode can't respect this as CS is deasserted by the hardware at the end of
the message.
Disable multi-mode when not applicable to the current message.
Fixes: d153ff4056cb ("spi: omap2-mcspi: Add support for MULTI-mode")
Signed-off-by: Félix Piédallu <felix.piedallu@non.se.com>
Link: https://patch.msgid.link/20250606-cs_change_fix-v1-1-27191a98a2e5@non.se.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a missing call to of_node_put() if devm_kcalloc() fails.
Fix this by changing the code to use cleanup.h magic to drop the
refcount.
Fixes: 6b0cd72757c6 ("regulator: max20086: fix invalid memory access")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRLqgJWMxYU03G@stanley.mountain
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 25704938c86d7b2 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 1239f681359926101e ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
sound/soc/loongson/loongson_i2s.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for ASoC/Loongson.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250608142737.168829-1-chenhuacai@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modify the value of ES8326_SDINOUT1_IO in the initialization
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250604061821.2678-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a type promotion that can happen when freq(u32) variable is
comapared with sclk_target(integer), when sclk_target is a negative
value it promotes to a large postive integer which might not be a
problem in this particular case as the condition evaluates to false
when that happens, but bail out early when sclk_target has negative
error codes.
cs48l32_sclk_rates[i].freq >= sclk_target
Fix this by adding a negative error check when
snd_soc_tdm_params_to_bclk() fails
Fixes: e2bcbf99d045 ("ASoC: cs48l32: Add driver for Cirrus Logic CS48L32 audio DSP")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20250603214813.197346-1-harshit.m.mogalapalli@oracle.com
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Add initial DMR support, which required smarter RAPL probe
- Fix AMD MSR RAPL energy reporting
- Add RAPL power limit configuration output
- Minor fixes
* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.06.08
tools/power turbostat: Add initial support for BartlettLake
tools/power turbostat: Add initial support for DMR
tools/power turbostat: Dump RAPL sysfs info
tools/power turbostat: Avoid probing the same perf counters
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
tools/power turbostat: Clean up add perf/msr counter logic
tools/power turbostat: Introduce add_msr_counter()
tools/power turbostat: Remove add_msr_perf_counter_()
tools/power turbostat: Remove add_cstate_perf_counter_()
tools/power turbostat: Remove add_rapl_perf_counter_()
tools/power turbostat: Quit early for unsupported RAPL counters
tools/power turbostat: Always check rapl_joules flag
tools/power turbostat: Fix AMD package-energy reporting
tools/power turbostat: Fix RAPL_GFX_ALL typo
tools/power turbostat: Add Android support for MSR device handling
tools/power turbostat.8: pm_domain wording fix
tools/power turbostat.8: fix typo: idle_pct should be pct_idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
|
