summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-22XArray: Disallow sibling entries of nodesMatthew Wilcox (Oracle)
There is a race between xas_split() and xas_load() which can result in the wrong page being returned, and thus data corruption. Fortunately, it's hard to hit (syzbot took three months to find it) and often guarded with VM_BUG_ON(). The anatomy of this race is: thread A thread B order-9 page is stored at index 0x200 lookup of page at index 0x274 page split starts load of sibling entry at offset 9 stores nodes at offsets 8-15 load of entry at offset 8 The entry at offset 8 turns out to be a node, and so we descend into it, and load the page at index 0x234 instead of 0x274. This is hard to fix on the split side; we could replace the entire node that contains the order-9 page instead of replacing the eight entries. Fixing it on the lookup side is easier; just disallow sibling entries that point to nodes. This cannot ever be a useful thing as the descent would not know the correct offset to use within the new node. The test suite continues to pass, but I have not added a new test for this bug. Reported-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com Tested-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-04-22tools: Add kmem_cache_alloc_lru()Matthew Wilcox (Oracle)
Turn kmem_cache_alloc() into a wrapper around kmem_cache_alloc_lru(). Fixes: 9bbdc0f32409 ("xarray: use kmem_cache_alloc_lru to allocate xa_node") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Li Wang <liwang@redhat.com>
2022-04-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "13 patches. Subsystems affected by this patch series: mm (memory-failure, memcg, userfaultfd, hugetlbfs, mremap, oom-kill, kasan, hmm), and kcov" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove() kcov: don't generate a warning on vm_insert_page()'s failure MAINTAINERS: add Vincenzo Frascino to KASAN reviewers oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup selftest/vm: add skip support to mremap_test selftest/vm: support xfail in mremap_test selftest/vm: verify remap destination address in mremap_test selftest/vm: verify mmap addr in mremap_test mm, hugetlb: allow for "high" userspace addresses userfaultfd: mark uffd_wp regardless of VM_WRITE flag memcg: sync flush only if periodic flush is delayed mm/memory-failure.c: skip huge_zero_page in memory_failure() mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()
2022-04-22mm/vmalloc: huge vmalloc backing pages should be split rather than compoundNicholas Piggin
Huge vmalloc higher-order backing pages were allocated with __GFP_COMP in order to allow the sub-pages to be refcounted by callers such as "remap_vmalloc_page [sic]" (remap_vmalloc_range). However a similar problem exists for other struct page fields callers use, for example fb_deferred_io_fault() takes a vmalloc'ed page and not only refcounts it but uses ->lru, ->mapping, ->index. This is not compatible with compound sub-pages, and can cause bad page state issues like BUG: Bad page state in process swapper/0 pfn:00743 page:(____ptrval____) refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x743 flags: 0x7ffff000000000(node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000000 c00c00000001d0c8 c00c00000001d0c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: corrupted mapping in tail page Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc3-00082-gfc6fff4a7ce1-dirty #2810 Call Trace: dump_stack_lvl+0x74/0xa8 (unreliable) bad_page+0x12c/0x170 free_tail_pages_check+0xe8/0x190 free_pcp_prepare+0x31c/0x4e0 free_unref_page+0x40/0x1b0 __vunmap+0x1d8/0x420 ... The correct approach is to use split high-order pages for the huge vmalloc backing. These allow callers to treat them in exactly the same way as individually-allocated order-0 pages. Link: https://lore.kernel.org/all/14444103-d51b-0fb3-ee63-c3f182f0b546@molgen.mpg.de/ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Cc: Song Liu <songliubraving@fb.com> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-22bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hookEyal Birger
xmit_check_hhlen() observes the dst for getting the device hard header length to make sure a modified packet can fit. When a helper which changes the dst - such as bpf_skb_set_tunnel_key() - is called as part of the xmit program the accessed dst is no longer valid. This leads to the following splat: BUG: kernel NULL pointer dereference, address: 00000000000000de #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:bpf_xmit+0xfb/0x17f Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89 RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000 R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000 FS: 00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0 Call Trace: <TASK> lwtunnel_xmit.cold+0x71/0xc8 ip_finish_output2+0x279/0x520 ? __ip_finish_output.part.0+0x21/0x130 Fix by fetching the device hard header length before running the BPF code. Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com
2022-04-22riscv: patch_text: Fixup last cpu should be masterGuo Ren
These patch_text implementations are using stop_machine_cpuslocked infrastructure with atomic cpu_count. The original idea: When the master CPU patch_text, the others should wait for it. But current implementation is using the first CPU as master, which couldn't guarantee the remaining CPUs are waiting. This patch changes the last CPU as the master to solve the potential risk. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 043cb41a85de ("riscv: introduce interfaces to patch kernel code") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-04-22binder: Gracefully handle BINDER_TYPE_FDA objects with num_fds=0Alessandro Astone
Some android userspace is sending BINDER_TYPE_FDA objects with num_fds=0. Like the previous patch, this is reproducible when playing a video. Before commit 09184ae9b575 BINDER_TYPE_FDA objects with num_fds=0 were 'correctly handled', as in no fixup was performed. After commit 09184ae9b575 we aggregate fixup and skip regions in binder_ptr_fixup structs and distinguish between the two by using the skip_size field: if it's 0, then it's a fixup, otherwise skip. When processing BINDER_TYPE_FDA objects with num_fds=0 we add a skip region of skip_size=0, and this causes issues because now binder_do_deferred_txn_copies will think this was a fixup region. To address that, return early from binder_translate_fd_array to avoid adding an empty skip region. Fixes: 09184ae9b575 ("binder: defer copies of pre-patched txn data") Acked-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@kernel.org> Signed-off-by: Alessandro Astone <ales.astone@gmail.com> Link: https://lore.kernel.org/r/20220415120015.52684-1-ales.astone@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22binder: Address corner cases in deferred copy and fixupAlessandro Astone
When handling BINDER_TYPE_FDA object we are pushing a parent fixup with a certain skip_size but no scatter-gather copy object, since the copy is handled standalone. If BINDER_TYPE_FDA is the last children the scatter-gather copy loop will never stop to skip it, thus we are left with an item in the parent fixup list. This will trigger the BUG_ON(). This is reproducible in android when playing a video. We receive a transaction that looks like this: obj[0] BINDER_TYPE_PTR, parent obj[1] BINDER_TYPE_PTR, child obj[2] BINDER_TYPE_PTR, child obj[3] BINDER_TYPE_FDA, child Fixes: 09184ae9b575 ("binder: defer copies of pre-patched txn data") Acked-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@kernel.org> Signed-off-by: Alessandro Astone <ales.astone@gmail.com> Link: https://lore.kernel.org/r/20220415120015.52684-2-ales.astone@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22thermal/governor: Remove deprecated informationDaniel Lezcano
The userspace governor is still in use on production systems and the deprecating warning is scary. Even if we want to get rid of the userspace governor, it is too soon yet as the alternatives are not yet adopted. Change the deprecated warning by an information message suggesting to switch to the netlink thermal events. Fixes: 0275c9fb0eff ("thermal/core: Make the userspace governor deprecated") Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-22Revert "thermal/core: Deprecate changing cooling device state from userspace"Daniel Lezcano
This reverts commit a67a46af4ad6342378e332b7420c1d1a2818c53f. It has been reported the warning is annoying as the cooling device state is still needed on some production system. Meanwhile we provide a way to consolidate the thermal framework to prevent multiple actors acting on the cooling devices with conflicting decisions, let's revert this warning. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-22serial: 8250: Correct the clock for EndRun PTP/1588 PCIe deviceMaciej W. Rozycki
The EndRun PTP/1588 dual serial port device is based on the Oxford Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock. The clock rate is divided by the oversampling rate of 16 as it is supplied to the baud rate generator, yielding the baud base of 3906250. Replace the incorrect baud base of 4000000 with the right value of 3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct the clock for OxSemi PCIe devices"). Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Cc: stable <stable@kernel.org> Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22serial: 8250: Also set sticky MCR bits in console restorationMaciej W. Rozycki
Sticky MCR bits are lost in console restoration if console suspending has been disabled. This currently affects the AFE bit, which works in combination with RTS which we set, so we want to make sure the UART retains control of its FIFO where previously requested. Also specific drivers may need other bits in the future. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend") Cc: stable@vger.kernel.org # v4.0+ Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22tty: n_gsm: fix software flow control handlingDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.8.1 states that XON/XOFF characters shall be used instead of Fcon/Fcoff command in advanced option mode to handle flow control. Chapter 5.4.8.2 describes how XON/XOFF characters shall be handled. Basic option mode only used Fcon/Fcoff commands and no XON/XOFF characters. These are treated as data bytes here. The current implementation uses the gsm_mux field 'constipated' to handle flow control from the remote peer and the gsm_dlci field 'constipated' to handle flow control from each DLCI. The later is unrelated to this patch. The gsm_mux field is correctly set for Fcon/Fcoff commands in gsm_control_message(). However, the same is not true for XON/XOFF characters in gsm1_receive(). Disable software flow control handling in the tty to allow explicit handling by n_gsm. Add the missing handling in advanced option mode for gsm_mux in gsm1_receive() to comply with the standard. This patch depends on the following commit: Commit 8838b2af23ca ("tty: n_gsm: fix SW flow control encoding/handling") Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220422071025.5490-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22tty: n_gsm: fix invalid use of MSC in advanced optionDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.7 states that the Modem Status Command (MSC) shall only be used if the basic option was chosen. The current implementation uses MSC frames even if advanced option was chosen to inform the peer about modem line state updates. A standard conform peer may choose to discard these frames in advanced option mode. Furthermore, gsmtty_modem_update() is not part of the 'tty_operations' functions despite its name. Rename gsmtty_modem_update() to gsm_modem_update() to clarify this. Split its function into gsm_modem_upd_via_data() and gsm_modem_upd_via_msc() depending on the encoding and adaption. Introduce gsm_dlci_modem_output() as adaption of gsm_dlci_data_output() to encode and queue empty frames in advanced option mode. Use it in gsm_modem_upd_via_data(). gsm_modem_upd_via_msc() is based on the initial gsmtty_modem_update() function which used only MSC frames to update modem states. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220422071025.5490-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22tty: n_gsm: fix broken virtual tty handlingDaniel Starke
Dynamic virtual tty registration was introduced to allow the user to handle these cases with uevent rules. The following commits relate to this: Commit 5b87686e3203 ("tty: n_gsm: Modify gsmtty driver register method when config requester") Commit 0b91b5332368 ("tty: n_gsm: Save dlci address open status when config requester") Commit 46292622ad73 ("tty: n_gsm: clean up indenting in gsm_queue()") However, the following behavior can be seen with this implementation: - n_gsm ldisc is activated via ioctl - all configuration parameters are set to their default value (initiator=0) - the mux gets activated and attached and gsmtty0 is being registered in in gsm_dlci_open() after DLCI 0 was established (DLCI 0 is the control channel) - the user configures n_gsm via ioctl GSMIOC_SETCONF as initiator - this re-attaches the n_gsm mux - no new gsmtty devices are registered in gsmld_attach_gsm() because the mux is already active - the initiator side registered only the control channel as gsmtty0 (which should never happen) and no user channel tty The commits above make it impossible to operate the initiator side as no user channel tty is or will be available. On the other hand, this behavior will make it also impossible to allow DLCI parameter negotiation on responder side in the future. The responder side first needs to provide a device for the application before the application can set its parameters of the associated DLCI via ioctl. Note that the user application is still able to detect a link establishment without relaying to uevent by waiting for DTR open on responder side. This is the same behavior as on a physical serial interface. And on initiator side a tty hangup can be detected if a link establishment request failed. Revert the commits above completely to always register all user channels and no control channel after mux attachment. No other changes are made. Fixes: 5b87686e3203 ("tty: n_gsm: Modify gsmtty driver register method when config requester") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220422071025.5490-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22Revert "serial: sc16is7xx: Clear RS485 bits in the shutdown"Hui Wang
This reverts commit 927728a34f11b5a27f4610bdb7068317d6fdc72a. Once the uart_port->rs485->flag is set to SER_RS485_ENABLED, the port should always work in RS485 mode. If users want the port to leave RS485 mode, they need to call ioctl() to clear SER_RS485_ENABLED. So here we shouldn't clear the RS485 bits in the shutdown(). Fixes: 927728a34f11 ("serial: sc16is7xx: Clear RS485 bits in the shutdown") Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220418094339.678144-1-hui.wang@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22Merge tag 'icc-5.18-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect fixes for v5.18 This contains a fix for a reported issue on sc7180 platforms, where one of the resources has been incorrectly modelled as both clock and interconnect, which is causing a crash when both frameworks try to manage it. Fix the same issue also on another platform that appears to be affected by the same. - interconnect: qcom: sc7180: Drop IP0 interconnects - interconnect: qcom: sdx55: Drop IP0 interconnects Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sdx55: Drop IP0 interconnects interconnect: qcom: sc7180: Drop IP0 interconnects
2022-04-22Merge tag 'phy-fixes-5.18' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus Vinod writes: phy: fixes for 5.18 Fixes for bunch of drivers: - TI fixes for runtime disable, missing of_node_put and error handling - Samsung fixes for device_put and of_node_put - Amlogic error path handling * tag 'phy-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe() phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks phy: ti: tusb1210: Fix an error handling path in tusb1210_probe() phy: samsung: exynos5250-sata: fix missing device put in probe error paths phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe phy: ti: Fix missing of_node_put in ti_pipe3_get_sysctrl() phy: ti: tusb1210: Make tusb1210_chg_det_states static
2022-04-22netfilter: nft_set_rbtree: overlap detection with element re-addition after ↵Pablo Neira Ayuso
deletion This patch fixes spurious EEXIST errors. Extend d2df92e98a34 ("netfilter: nft_set_rbtree: handle element re-addition after deletion") to deal with elements with same end flags in the same transation. Reset the overlap flag as described by 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion"). Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion") Fixes: d2df92e98a34 ("netfilter: nft_set_rbtree: handle element re-addition after deletion") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-22Merge tag 'mhi-fixes-v5.18' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus Manivannan writes: MHI fixes for v5.18 Couple of patches fixing the hibernation issue seen on MHI endpoint devices like SDX65 modems: - During hibernation, the host puts the device into D3cold after thaw() stage. But at that time, the device would be in M0 state. So the device emits a warning (not visible to the host but to device firmware only) stating invalid transition. This is fixed by adding a poweroff() callback that puts the device into M3 before D3cold. - There is a possibility that the recovery worker might be running while trying to powerdown the device. So flush the recovery worker before that. * tag 'mhi-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: pci_generic: Flush recovery worker during freeze bus: mhi: host: pci_generic: Add missing poweroff() PM callback
2022-04-22usb: dwc3: core: Only handle soft-reset in DCTLThinh Nguyen
Make sure not to set run_stop bit or link state change request while initiating soft-reset. Register read-modify-write operation may unintentionally start the controller before the initialization completes with its previous DCTL value, which can cause initialization failure. Fixes: f59dcab17629 ("usb: dwc3: core: improve reset sequence") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/6aecbd78328f102003d40ccf18ceeebd411d3703.1650594792.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22net: dsa: Add missing of_node_put() in dsa_port_link_register_ofMiaoqian Lin
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. of_node_put() will check for NULL value. Fixes: a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22regulator: dt-bindings: Revise the rt5190a buck/ldo descriptionChiYuan Huang
Revise the rt5190a bucks and ldo property description. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1650610255-6180-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-22arm64: mm: fix p?d_leaf()Muchun Song
The pmd_leaf() is used to test a leaf mapped PMD, however, it misses the PROT_NONE mapped PMD on arm64. Fix it. A real world issue [1] caused by this was reported by Qian Cai. Also fix pud_leaf(). Link: https://patchwork.kernel.org/comment/24798260/ [1] Fixes: 8aa82df3c123 ("arm64: mm: add p?d_leaf() definitions") Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Link: https://lore.kernel.org/r/20220422060033.48711-1-songmuchun@bytedance.com Signed-off-by: Will Deacon <will@kernel.org>
2022-04-22objtool: Fix code relocs vs weak symbolsPeter Zijlstra
Occasionally objtool driven code patching (think .static_call_sites .retpoline_sites etc..) goes sideways and it tries to patch an instruction that doesn't match. Much head-scatching and cursing later the problem is as outlined below and affects every section that objtool generates for us, very much including the ORC data. The below uses .static_call_sites because it's convenient for demonstration purposes, but as mentioned the ORC sections, .retpoline_sites and __mount_loc are all similarly affected. Consider: foo-weak.c: extern void __SCT__foo(void); __attribute__((weak)) void foo(void) { return __SCT__foo(); } foo.c: extern void __SCT__foo(void); extern void my_foo(void); void foo(void) { my_foo(); return __SCT__foo(); } These generate the obvious code (gcc -O2 -fcf-protection=none -fno-asynchronous-unwind-tables -c foo*.c): foo-weak.o: 0000000000000000 <foo>: 0: e9 00 00 00 00 jmpq 5 <foo+0x5> 1: R_X86_64_PLT32 __SCT__foo-0x4 foo.o: 0000000000000000 <foo>: 0: 48 83 ec 08 sub $0x8,%rsp 4: e8 00 00 00 00 callq 9 <foo+0x9> 5: R_X86_64_PLT32 my_foo-0x4 9: 48 83 c4 08 add $0x8,%rsp d: e9 00 00 00 00 jmpq 12 <foo+0x12> e: R_X86_64_PLT32 __SCT__foo-0x4 Now, when we link these two files together, you get something like (ld -r -o foos.o foo-weak.o foo.o): foos.o: 0000000000000000 <foo-0x10>: 0: e9 00 00 00 00 jmpq 5 <foo-0xb> 1: R_X86_64_PLT32 __SCT__foo-0x4 5: 66 2e 0f 1f 84 00 00 00 00 00 nopw %cs:0x0(%rax,%rax,1) f: 90 nop 0000000000000010 <foo>: 10: 48 83 ec 08 sub $0x8,%rsp 14: e8 00 00 00 00 callq 19 <foo+0x9> 15: R_X86_64_PLT32 my_foo-0x4 19: 48 83 c4 08 add $0x8,%rsp 1d: e9 00 00 00 00 jmpq 22 <foo+0x12> 1e: R_X86_64_PLT32 __SCT__foo-0x4 Noting that ld preserves the weak function text, but strips the symbol off of it (hence objdump doing that funny negative offset thing). This does lead to 'interesting' unused code issues with objtool when ran on linked objects, but that seems to be working (fingers crossed). So far so good.. Now lets consider the objtool static_call output section (readelf output, old binutils): foo-weak.o: Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + 0 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 foo.o: Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + d 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 foos.o: Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 0 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 1d 000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 So we have two patch sites, one in the dead code of the weak foo and one in the real foo. All is well. *HOWEVER*, when the toolchain strips unused section symbols it generates things like this (using new enough binutils): foo-weak.o: Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + 0 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 foo.o: Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + d 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 foos.o: Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 foo + 0 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 foo + d 000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 And now we can see how that foos.o .static_call_sites goes side-ways, we now have _two_ patch sites in foo. One for the weak symbol at foo+0 (which is no longer a static_call site!) and one at foo+d which is in fact the right location. This seems to happen when objtool cannot find a section symbol, in which case it falls back to any other symbol to key off of, however in this case that goes terribly wrong! As such, teach objtool to create a section symbol when there isn't one. Fixes: 44f6a7c0755d ("objtool: Fix seg fault with Clang non-section symbols") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20220419203807.655552918@infradead.org
2022-04-22objtool: Fix type of reloc::addendPeter Zijlstra
Elf{32,64}_Rela::r_addend is of type: Elf{32,64}_Sword, that means that our reloc::addend needs to be long or face tuncation issues when we do elf_rebuild_reloc_section(): - 107: 48 b8 00 00 00 00 00 00 00 00 movabs $0x0,%rax 109: R_X86_64_64 level4_kernel_pgt+0x80000067 + 107: 48 b8 00 00 00 00 00 00 00 00 movabs $0x0,%rax 109: R_X86_64_64 level4_kernel_pgt-0x7fffff99 Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20220419203807.596871927@infradead.org
2022-04-22net: cosa: fix error check return value of register_chrdev()Lv Ruyi
If major equal 0, register_chrdev() returns error code when it fails. This function dynamically allocate a major and return its number on success, so we should use "< 0" to check it instead of "!". Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-By: Jan "Yenya" Kasprzak <kas@fi.muni.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-21Merge tag 'drm-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Extra quiet after Easter, only have minor i915 and msm pulls. However I haven't seen a PR from our misc tree in a little while, I've cc'ed all the suspects. Once that unblocks I expect a bit larger bunch of patches to arrive. Otherwise as I said, one msm revert and two i915 fixes. msm: - revert iommu change that broke some platforms. i915: - Unset enable_psr2_sel_fetch if PSR2 detection fails - Fix to detect when VRR is turned off from panel settings" * tag 'drm-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drm: drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails drm/msm: Revert "drm/msm: Stop using iommu_present()" drm/i915/display/vrr: Reset VRR capable property on a long hpd
2022-04-21mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()Alistair Popple
In some cases it is possible for mmu_interval_notifier_remove() to race with mn_tree_inv_end() allowing it to return while the notifier data structure is still in use. Consider the following sequence: CPU0 - mn_tree_inv_end() CPU1 - mmu_interval_notifier_remove() ----------------------------------- ------------------------------------ spin_lock(subscriptions->lock); seq = subscriptions->invalidate_seq; spin_lock(subscriptions->lock); spin_unlock(subscriptions->lock); subscriptions->invalidate_seq++; wait_event(invalidate_seq != seq); return; interval_tree_remove(interval_sub); kfree(interval_sub); spin_unlock(subscriptions->lock); wake_up_all(); As the wait_event() condition is true it will return immediately. This can lead to use-after-free type errors if the caller frees the data structure containing the interval notifier subscription while it is still on a deferred list. Fix this by taking the appropriate lock when reading invalidate_seq to ensure proper synchronisation. I observed this whilst running stress testing during some development. You do have to be pretty unlucky, but it leads to the usual problems of use-after-free (memory corruption, kernel crash, difficult to diagnose WARN_ON, etc). Link: https://lkml.kernel.org/r/20220420043734.476348-1-apopple@nvidia.com Fixes: 99cb252f5e68 ("mm/mmu_notifier: add an interval tree notifier") Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Christian König <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21kcov: don't generate a warning on vm_insert_page()'s failureAleksandr Nogikh
vm_insert_page()'s failure is not an unexpected condition, so don't do WARN_ONCE() in such a case. Instead, print a kernel message and just return an error code. This flaw has been reported under an OOM condition by sysbot [1]. The message is mainly for the benefit of the test log, in this case the fuzzer's log so that humans inspecting the log can figure out what was going on. KCOV is a testing tool, so I think being a little more chatty when KCOV unexpectedly is about to fail will save someone debugging time. We don't want the WARN, because it's not a kernel bug that syzbot should report, and failure can happen if the fuzzer tries hard enough (as above). Link: https://lkml.kernel.org/r/Ylkr2xrVbhQYwNLf@elver.google.com [1] Link: https://lkml.kernel.org/r/20220401182512.249282-1-nogikh@google.com Fixes: b3d7fe86fbd0 ("kcov: properly handle subsequent mmap calls"), Signed-off-by: Aleksandr Nogikh <nogikh@google.com> Acked-by: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Taras Madan <tarasmadan@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21MAINTAINERS: add Vincenzo Frascino to KASAN reviewersVincenzo Frascino
Add my email address to KASAN reviewers list to make sure that I am Cc'ed in all the KASAN changes that may affect arm64 MTE. Link: https://lkml.kernel.org/r/20220419170640.21404-1-vincenzo.frascino@arm.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanupNico Pache
The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which can be targeted by the oom reaper. This mapping is used to store the futex robust list head; the kernel does not keep a copy of the robust list and instead references a userspace address to maintain the robustness during a process death. A race can occur between exit_mm and the oom reaper that allows the oom reaper to free the memory of the futex robust list before the exit path has handled the futex death: CPU1 CPU2 -------------------------------------------------------------------- page_fault do_exit "signal" wake_oom_reaper oom_reaper oom_reap_task_mm (invalidates mm) exit_mm exit_mm_release futex_exit_release futex_cleanup exit_robust_list get_user (EFAULT- can't access memory) If the get_user EFAULT's, the kernel will be unable to recover the waiters on the robust_list, leaving userspace mutexes hung indefinitely. Delay the OOM reaper, allowing more time for the exit path to perform the futex cleanup. Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer Based on a patch by Michal Hocko. Link: https://elixir.bootlin.com/glibc/glibc-2.35/source/nptl/allocatestack.c#L370 [1] Link: https://lkml.kernel.org/r/20220414144042.677008-1-npache@redhat.com Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") Signed-off-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Nico Pache <npache@redhat.com> Co-developed-by: Joel Savitz <jsavitz@redhat.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Waiman Long <longman@redhat.com> Cc: Herton R. Krzesinski <herton@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Savitz <jsavitz@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21selftest/vm: add skip support to mremap_testSidhartha Kumar
Allow the mremap test to be skipped due to errors such as failing to parse the mmap_min_addr sysctl. Link: https://lkml.kernel.org/r/20220420215721.4868-4-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21selftest/vm: support xfail in mremap_testSidhartha Kumar
Use ksft_test_result_xfail for the tests which are expected to fail. Link: https://lkml.kernel.org/r/20220420215721.4868-3-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21selftest/vm: verify remap destination address in mremap_testSidhartha Kumar
Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy existing mappings. This causes a segfault when regions such as text are remapped and the permissions are changed. Verify the requested mremap destination address does not overlap any existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep incrementing the destination address until a valid mapping is found or fail the current test once the max address is reached. Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21selftest/vm: verify mmap addr in mremap_testSidhartha Kumar
Avoid calling mmap with requested addresses that are less than the system's mmap_min_addr. When run as root, mmap returns EACCES when trying to map addresses < mmap_min_addr. This is not one of the error codes for the condition to retry the mmap in the test. Rather than arbitrarily retrying on EACCES, don't attempt an mmap until addr > vm.mmap_min_addr. Add a munmap call after an alignment check as the mappings are retained after the retry and can reach the vm.max_map_count sysctl. Link: https://lkml.kernel.org/r/20220420215721.4868-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21mm, hugetlb: allow for "high" userspace addressesChristophe Leroy
This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") for hugetlb. This patch adds support for "high" userspace addresses that are optionally supported on the system and have to be requested via a hint mechanism ("high" addr parameter to mmap). Architectures such as powerpc and x86 achieve this by making changes to their architectural versions of hugetlb_get_unmapped_area() function. However, arm64 uses the generic version of that function. So take into account arch_get_mmap_base() and arch_get_mmap_end() in hugetlb_get_unmapped_area(). To allow that, move those two macros out of mm/mmap.c into include/linux/sched/mm.h If these macros are not defined in architectural code then they default to (TASK_SIZE) and (base) so should not introduce any behavioural changes to architectures that do not define them. For the time being, only ARM64 is affected by this change. Catalin (ARM64) said "We should have fixed hugetlb_get_unmapped_area() as well when we added support for 52-bit VA. The reason for commit f6795053dac8 was to prevent normal mmap() from returning addresses above 48-bit by default as some user-space had hard assumptions about this. It's a slight ABI change if you do this for hugetlb_get_unmapped_area() but I doubt anyone would notice. It's more likely that the current behaviour would cause issues, so I'd rather have them consistent. Basically when arm64 gained support for 52-bit addresses we did not want user-space calling mmap() to suddenly get such high addresses, otherwise we could have inadvertently broken some programs (similar behaviour to x86 here). Hence we added commit f6795053dac8. But we missed hugetlbfs which could still get such high mmap() addresses. So in theory that's a potential regression that should have bee addressed at the same time as commit f6795053dac8 (and before arm64 enabled 52-bit addresses)" Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> [5.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21userfaultfd: mark uffd_wp regardless of VM_WRITE flagNadav Amit
When a PTE is set by UFFD operations such as UFFDIO_COPY, the PTE is currently only marked as write-protected if the VMA has VM_WRITE flag set. This seems incorrect or at least would be unexpected by the users. Consider the following sequence of operations that are being performed on a certain page: mprotect(PROT_READ) UFFDIO_COPY(UFFDIO_COPY_MODE_WP) mprotect(PROT_READ|PROT_WRITE) At this point the user would expect to still get UFFD notification when the page is accessed for write, but the user would not get one, since the PTE was not marked as UFFD_WP during UFFDIO_COPY. Fix it by always marking PTEs as UFFD_WP regardless on the write-permission in the VMA flags. Link: https://lkml.kernel.org/r/20220217211602.2769-1-namit@vmware.com Fixes: 292924b26024 ("userfaultfd: wp: apply _PAGE_UFFD_WP bit") Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21memcg: sync flush only if periodic flush is delayedShakeel Butt
Daniel Dao has reported [1] a regression on workloads that may trigger a lot of refaults (anon and file). The underlying issue is that flushing rstat is expensive. Although rstat flush are batched with (nr_cpus * MEMCG_BATCH) stat updates, it seems like there are workloads which genuinely do stat updates larger than batch value within short amount of time. Since the rstat flush can happen in the performance critical codepaths like page faults, such workload can suffer greatly. This patch fixes this regression by making the rstat flushing conditional in the performance critical codepaths. More specifically, the kernel relies on the async periodic rstat flusher to flush the stats and only if the periodic flusher is delayed by more than twice the amount of its normal time window then the kernel allows rstat flushing from the performance critical codepaths. Now the question: what are the side-effects of this change? The worst that can happen is the refault codepath will see 4sec old lruvec stats and may cause false (or missed) activations of the refaulted page which may under-or-overestimate the workingset size. Though that is not very concerning as the kernel can already miss or do false activations. There are two more codepaths whose flushing behavior is not changed by this patch and we may need to come to them in future. One is the writeback stats used by dirty throttling and second is the deactivation heuristic in the reclaim. For now keeping an eye on them and if there is report of regression due to these codepaths, we will reevaluate then. Link: https://lore.kernel.org/all/CA+wXwBSyO87ZX5PVwdHm-=dBjZYECGmfnydUicUyrQqndgX2MQ@mail.gmail.com [1] Link: https://lkml.kernel.org/r/20220304184040.1304781-1-shakeelb@google.com Fixes: 1f828223b799 ("memcg: flush lruvec stats in the refault") Signed-off-by: Shakeel Butt <shakeelb@google.com> Reported-by: Daniel Dao <dqminh@cloudflare.com> Tested-by: Ivan Babrou <ivan@cloudflare.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Frank Hofmann <fhofmann@cloudflare.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21mm/memory-failure.c: skip huge_zero_page in memory_failure()Xu Yu
Kernel panic when injecting memory_failure for the global huge_zero_page, when CONFIG_DEBUG_VM is enabled, as follows. Injecting memory failure for pfn 0x109ff9 at process virtual address 0x20ff9000 page:00000000fb053fc3 refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x109e00 head:00000000fb053fc3 order:9 compound_mapcount:0 compound_pincount:0 flags: 0x17fffc000010001(locked|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 017fffc000010001 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000002ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(is_huge_zero_page(head)) ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:2499! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 553 Comm: split_bug Not tainted 5.18.0-rc1+ #11 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 3288b3c 04/01/2014 RIP: 0010:split_huge_page_to_list+0x66a/0x880 Code: 84 9b fb ff ff 48 8b 7c 24 08 31 f6 e8 9f 5d 2a 00 b8 b8 02 00 00 e9 e8 fb ff ff 48 c7 c6 e8 47 3c 82 4c b RSP: 0018:ffffc90000dcbdf8 EFLAGS: 00010246 RAX: 000000000000003c RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff823e4c4f RDI: 00000000ffffffff RBP: ffff88843fffdb40 R08: 0000000000000000 R09: 00000000fffeffff R10: ffffc90000dcbc48 R11: ffffffff82d68448 R12: ffffea0004278000 R13: ffffffff823c6203 R14: 0000000000109ff9 R15: ffffea000427fe40 FS: 00007fc375a26740(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc3757c9290 CR3: 0000000102174006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: try_to_split_thp_page+0x3a/0x130 memory_failure+0x128/0x800 madvise_inject_error.cold+0x8b/0xa1 __x64_sys_madvise+0x54/0x60 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc3754f8bf9 Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffeda93a1d8 EFLAGS: 00000217 ORIG_RAX: 000000000000001c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc3754f8bf9 RDX: 0000000000000064 RSI: 0000000000003000 RDI: 0000000020ff9000 RBP: 00007ffeda93a200 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000217 R12: 0000000000400490 R13: 00007ffeda93a2e0 R14: 0000000000000000 R15: 0000000000000000 This makes huge_zero_page bail out explicitly before split in memory_failure(), thus the panic above won't happen again. Link: https://lkml.kernel.org/r/497d3835612610e370c74e697ea3c721d1d55b9c.1649775850.git.xuyu@linux.alibaba.com Fixes: 6a46079cf57a ("HWPOISON: The high level memory error handler in the VM v7") Signed-off-by: Xu Yu <xuyu@linux.alibaba.com> Reported-by: Abaci <abaci@linux.alibaba.com> Suggested-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()Naoya Horiguchi
There is a race condition between memory_failure_hugetlb() and hugetlb free/demotion, which causes setting PageHWPoison flag on the wrong page. The one simple result is that wrong processes can be killed, but another (more serious) one is that the actual error is left unhandled, so no one prevents later access to it, and that might lead to more serious results like consuming corrupted data. Think about the below race window: CPU 1 CPU 2 memory_failure_hugetlb struct page *head = compound_head(p); hugetlb page might be freed to buddy, or even changed to another compound page. get_hwpoison_page -- page is not what we want now... The current code first does prechecks roughly and then reconfirms after taking refcount, but it's found that it makes code overly complicated, so move the prechecks in a single hugetlb_lock range. A newly introduced function, try_memory_failure_hugetlb(), always takes hugetlb_lock (even for non-hugetlb pages). That can be improved, but memory_failure() is rare in principle, so should not be a big problem. Link: https://lkml.kernel.org/r/20220408135323.1559401-2-naoya.horiguchi@linux.dev Fixes: 761ad8d7c7b5 ("mm: hwpoison: introduce memory_failure_hugetlb()") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reported-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21clk: qcom: clk-rcg2: fix gfx3d frequency calculationDmitry Baryshkov
Since the commit 948fb0969eae ("clk: Always clamp the rounded rate"), the clk_core_determine_round_nolock() would clamp the requested rate between min and max rates from the rate request. Normally these fields would be filled by clk_core_get_boundaries() called from clk_round_rate(). However clk_gfx3d_determine_rate() uses a manually crafted rate request, which did not have these fields filled. Thus the requested frequency would be clamped to 0, resulting in weird frequencies being requested from the hardware. Fix this by filling min_rate and max_rate to the values valid for the respective PLLs (0 and ULONG_MAX). Fixes: 948fb0969eae ("clk: Always clamp the rounded rate") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220419235447.1586192-1-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reported-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-21clk: microchip: mpfs: don't reset disabled peripheralsConor Dooley
The current clock driver for PolarFire SoC puts the hardware behind "periph" clocks into reset if their clock is disabled. CONFIG_PM was recently added to the riscv defconfig and exposed issues caused by this behaviour, where the Cadence GEM was being put into reset between its bringup & the PHY bringup: https://lore.kernel.org/linux-riscv/9f4b057d-1985-5fd3-65c0-f944161c7792@microchip.com/ Fix this (for now) by removing the reset from mpfs_periph_clk_disable. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220411072340.740981-1-conor.dooley@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-21f2fs: should not truncate blocks during roll-forward recoveryJaegeuk Kim
If the file preallocated blocks and fsync'ed, we should not truncate them during roll-forward recovery which will recover i_size correctly back. Fixes: d4dd19ec1ea0 ("f2fs: do not expose unwritten blocks to user by DIO") Cc: <stable@vger.kernel.org> # 5.17+ Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-04-22ata: pata_marvell: Check the 'bmdma_addr' beforing readingZheyu Ma
Before detecting the cable type on the dma bar, the driver should check whether the 'bmdma_addr' is zero, which means the adapter does not support DMA, otherwise we will get the following error: [ 5.146634] Bad IO access at port 0x1 (return inb(port)) [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60 [ 5.150856] RIP: 0010:ioread8+0x4a/0x60 [ 5.160238] Call Trace: [ 5.160470] <TASK> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell] [ 5.161728] ata_eh_recover+0x3520/0x6cc0 [ 5.168075] ata_do_eh+0x49/0x3c0 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-22Merge tag 'drm-msm-fixes-2022-04-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Revert to fix iommu regression. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtvPo4xD2peAztDMPP2n4utb7d9WQboMFwsba9E8U2rCw@mail.gmail.com
2022-04-21Merge tag 'dmaengine-fix-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes: - idxd device RO checks and device cleanup - dw-edma unaligned access and alignment - qcom: missing minItems in binding - mediatek pm usage fix - imx init script" * tag 'dmaengine-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dt-bindings: dmaengine: qcom: gpi: Add minItems for interrupts dmaengine: idxd: skip clearing device context when device is read-only dmaengine: idxd: add RO check for wq max_transfer_size write dmaengine: idxd: add RO check for wq max_batch_size write dmaengine: idxd: fix retry value to be constant for duration of function call dmaengine: idxd: match type for retries var in idxd_enqcmds() dmaengine: dw-edma: Fix inconsistent indenting dmaengine: dw-edma: Fix unaligned 64bit access dmaengine: mediatek:Fix PM usage reference leak of mtk_uart_apdma_alloc_chan_resources dmaengine: imx-sdma: Fix error checking in sdma_event_remap dma: at_xdmac: fix a missing check on list iterator dmaengine: imx-sdma: fix init of uart scripts dmaengine: idxd: fix device cleanup on disable
2022-04-21RISC-V: cpuidle: fix Kconfig select for RISCV_SBI_CPUIDLERandy Dunlap
There can be lots of build errors when building cpuidle-riscv-sbi.o. They are all caused by a kconfig problem with this warning: WARNING: unmet direct dependencies detected for RISCV_SBI_CPUIDLE Depends on [n]: CPU_IDLE [=y] && RISCV [=y] && RISCV_SBI [=n] Selected by [y]: - SOC_VIRT [=y] && CPU_IDLE [=y] so make the 'select' of RISCV_SBI_CPUIDLE also depend on RISCV_SBI. Fixes: c5179ef1ca0c ("RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Anup Patel <anup@brainfault.org> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-04-21RISC-V: mm: Fix set_satp_mode() for platform not having Sv57Anup Patel
When Sv57 is not available the satp.MODE test in set_satp_mode() will fail and lead to pgdir re-programming for Sv48. The pgdir re-programming will fail as well due to pre-existing pgdir entry used for Sv57 and as a result kernel fails to boot on RISC-V platform not having Sv57. To fix above issue, we should clear the pgdir memory in set_satp_mode() before re-programming. Fixes: 011f09d12052 ("riscv: mm: Set sv57 on defaultly") Reported-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-04-22Merge tag 'drm-intel-fixes-2022-04-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Unset enable_psr2_sel_fetch if PSR2 detection fails - Fix to detect when VRR is turned off from panel settings Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YmAKuHwon7hGyIoC@jlahtine-mobl.ger.corp.intel.com
generated by cgit (git 2.34.1) at 2025-09-11 23:29:00 +0000