summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-04-11dma-buf/sw_sync: Decrement refcount on error in sw_sync_ioctl_get_deadline()Dan Carpenter
Call dma_fence_put(fence) before returning an error if dma_fence_to_sync_pt() fails. Use an unwind ladder at the end of the function to do the cleanup. Fixes: 70e67aaec2f4 ("dma-buf/sw_sync: Add fence deadline support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/a010a1ac-107b-4fc0-a052-9fd3706ad690@stanley.mountain Signed-off-by: Christian König <christian.koenig@amd.com>
2025-04-11drm/hisilicon/hibmc: Add vga connector detect functionsBaihan Li
Because the connected VGA connector would make driver can't get the userspace call, adding detect_ctx in vga connector to make HPD active userspace. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-10-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Add MSI irq getting and requesting for HPDBaihan Li
To realize HPD feature, request irq for HPD , add its handler function. We use pci_alloc_irq_vectors() to get our msi irq, because we have two interrupts now. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-9-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Enable this hot plug detect of irq featureBaihan Li
Add HPD interrupt enable functions in drm framework, and also add detect_ctx functions. Because of the debouncing when HPD pulled out, add 200 ms delay in detect. Add link reset process to reset link status when a new connector pulgged in. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-8-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Add colorbar-cfg feature and its debugfs fileBaihan Li
DP controller can support generating a color bar signal over the DisplayPort interface. This can be useful to check for possible DDR or GPU problems, as the signal generator resides completely in the DP block. Add debugfs file that controls colorbar generator. echo: config the color bar register to display cat: print the color bar configuration Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-7-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Getting connector info and EDID by using AUX channelBaihan Li
Add registering drm_aux and use it to get connector edid with drm functions. Add ddc channel in connector initialization to put drm_aux in drm_connector. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-6-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Refactor the member of drm_aux in struct hibmc_dpBaihan Li
Because the drm_aux of struct hibmc_dp_dev's member is not easy to get in hibmc_drm_dp.c, move the drm_aux to struct hibmc_dp. Then there are some adaptations and modifications to make this patch compile. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-5-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Add dp serdes cfg in dp processBaihan Li
Add dp serdes cfg in link training process, and related adapting and modificating. Change some init values about training, because we want completely to negotiation process, so we start with the maximum rate and the electrical characteristic level is 0. Because serdes default cfgs is changed and used in hibmc_kms_init(), we changed the if-statement to check whether the value is 0. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-4-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Add dp serdes cfg to adjust serdes rate, voltage and ↵Baihan Li
pre-emphasis This dp controller need features of digital-to-analog conversion and high-speed transmission in chip by its extern serdes controller. Our serdes cfg is relatively simple, just need two register configurations. Don't need too much functions, like: power on/off, initialize, and some complex configurations, so I'm not going to use the phy framework. This serdes is inited and configured in dp initialization, and also integrating them into link training process. For rate changing, we can change from 1.62-8.2Gpbs by cfg reg. For voltage and pre-emphasis levels changing, we can cfg different serdes ffe value. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-3-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11drm/hisilicon/hibmc: Restructuring the header dp_reg.hBaihan Li
Move the macros below their corresponding registers to make them more obvious. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250331074212.3370287-2-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-11selftests/landlock: Add PID tests for audit recordsMickaël Salaün
Add audit.thread tests to check that the PID tied to a domain is not a thread ID but the thread group ID. These new tests would not pass without the previous TGID fix. Extend matches_log_domain_allocated() to check against the PID that created the domain. Test coverage for security/landlock is 93.6% of 1524 lines according to gcc/gcov-14. Cc: Christian Brauner <brauner@kernel.org> Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20250410171725.1265860-3-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-04-11selftests/landlock: Factor out audit fixture in audit_testMickaël Salaün
The audit fixture needlessly stores and manages domain_stack. Move it to the audit.layers tests. This will be useful to reuse the audit fixture with the next patch. Cc: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20250410171725.1265860-2-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-04-11landlock: Log the TGID of the domain creatorMickaël Salaün
As for other Audit's "pid" fields, Landlock should use the task's TGID instead of its TID. Fix this issue by keeping a reference to the TGID of the domain creator. Existing tests already check for the PID but only with the thread group leader, so always the TGID. A following patch adds dedicated tests for non-leader thread. Remove the current_real_cred() check which does not make sense because we only reference a struct pid, whereas a previous version did reference a struct cred instead. Cc: Christian Brauner <brauner@kernel.org> Cc: Paul Moore <paul@paul-moore.com> Reviewed-by: Günther Noack <gnoack3000@gmail.com> Link: https://lore.kernel.org/r/20250410171725.1265860-1-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-04-11iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()Nicolin Chen
Two WARNINGs are observed when SMMU driver rolls back upon failure: arm-smmu-v3.9.auto: Failed to register iommu arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8 Call trace: dmam_free_coherent+0xc0/0xd8 (P) tegra241_vintf_free_lvcmdq+0x74/0x188 tegra241_cmdqv_remove_vintf+0x60/0x148 tegra241_cmdqv_remove+0x48/0xc8 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 ------------[ cut here ]------------ 128 pages are still in use! WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8 Call trace: free_contig_range+0x18c/0x1c8 (P) cma_release+0x154/0x2f0 dma_free_contiguous+0x38/0xa0 dma_direct_free+0x10c/0x248 dma_free_attrs+0x100/0x290 dmam_free_coherent+0x78/0xd8 tegra241_vintf_free_lvcmdq+0x74/0x160 tegra241_cmdqv_remove+0x98/0x198 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 This is because the LVCMDQ queue memory are managed by devres, while that dmam_free_coherent() is called in the context of devm_action_release(). Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres callbacks if ops->device_remove() is going to be manually freeing things that probe allocated": https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/ In fact, tegra241_cmdqv_init_structures() only allocates memory resources which means any failure that it generates would be similar to -ENOMEM, so there is no point in having that "falling back to standard SMMU" routine, as the standard SMMU would likely fail to allocate memory too. Remove the unwind part in tegra241_cmdqv_init_structures(), and return a proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since devres will take care of that. Fixes: 483e0bd8883a ("iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent") Cc: stable@vger.kernel.org Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250407201908.172225-1-nicolinc@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-04-11iommu: remove unneeded semicolonPei Xiao
cocci warnings: drivers/iommu/dma-iommu.c:1788:2-3: Unneeded semicolon so remove unneeded semicolon to fix cocci warnings. Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/tencent_73EEE47E6ECCF538229C9B9E6A0272DA2B05@qq.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-04-11iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_groupLouis-Alexis Eyraud
Currently, mtk_iommu calls during probe iommu_device_register before the hw_list from driver data is initialized. Since iommu probing issue fix, it leads to NULL pointer dereference in mtk_iommu_device_group when hw_list is accessed with list_first_entry (not null safe). So, change the call order to ensure iommu_device_register is called after the driver data are initialized. Fixes: 9e3a2a643653 ("iommu/mediatek: Adapt sharing and non-sharing pgtable case") Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reviewed-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183 Juniper, MT8186 Tentacruel Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Link: https://lore.kernel.org/r/20250403-fix-mtk-iommu-error-v2-1-fe8b18f8b0a8@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-04-11iommu/exynos: Fix suspend/resume with IDENTITY domainMarek Szyprowski
Commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") changed the sequence of probing the SYSMMU controller devices and calls to arm_iommu_attach_device(), what results in resuming SYSMMU controller earlier, when it is still set to IDENTITY mapping. Such change revealed the bug in IDENTITY handling in the exynos-iommu driver. When SYSMMU controller is set to IDENTITY mapping, data->domain is NULL, so adjust checks in suspend & resume callbacks to handle this case correctly. Fixes: b3d14960e629 ("iommu/exynos: Implement an IDENTITY domain") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20250401202731.2810474-1-m.szyprowski@samsung.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-04-11drm/xe/vf: Don't expose privileged GT debugfs files if VFMichal Wajdeczko
Some of the debugfs files require access to the registers that are not accessible to the VFs. Don't expose those files on VF drivers. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Tested-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Reviewed-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250403142635.1821-4-michal.wajdeczko@intel.com
2025-04-11drm/xe/guc: Don't expose GuC privileged debugfs files if VFMichal Wajdeczko
Some of the GuC debugfs files require access to the data that is not available on the VFs. Don't expose those files on the VF driver. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250403142635.1821-3-michal.wajdeczko@intel.com
2025-04-11drm/xe/guc: Refactor GuC debugfs initializationMichal Wajdeczko
We don't have to drmm_kmalloc() local copy of debugfs_list to write there our pointer to the struct xe_guc as we can extract pointer to the struct xe_gt from the grandparent debugfs entry, in similar way to what we did for GT debugfs files. Note that there is no change in file/directory structure, just refactored how files are created and how functions are called. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250403142635.1821-2-michal.wajdeczko@intel.com
2025-04-11accel/ivpu: Add cmdq_id to job related logsKarol Wachowski
Add tracking of command queue ID in JOB debug message to improve debugging capabilities. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155939.4049467-1-maciej.falkowski@linux.intel.com
2025-04-11accel/ivpu: Show NPU frequency in sysfsAndrzej Kacprowski
Add sysfs files that show maximum and current frequency of the NPU's data processing unit. New sysfs entries: - npu_max_frequency_mhz - npu_current_frequency_mhz Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155912.4049340-3-maciej.falkowski@linux.intel.com
2025-04-11accel/ivpu: Fix the NPU's DPU frequency calculationAndrzej Kacprowski
Fix the frequency returned to the user space by the DRM_IVPU_PARAM_CORE_CLOCK_RATE GET_PARAM IOCTL. The kernel driver returned CPU frequency for MTL and bare PLL frequency for LNL - this was inconsistent and incorrect for both platforms. With this fix the driver returns maximum frequency of the NPU data processing unit (DPU) for all HW generations. This is what user space always expected. Also do not set CPU frequency in boot params - the firmware does not use frequency passed from the driver, it was only used by the early pre-production firmware. With that we can remove CPU frequency calculation code. Show NPU frequency in FREQ_CHANGE interrupt when frequency tracking is enabled. Fixes: 8a27ad81f7d3 ("accel/ivpu: Split IP and buttress code") Cc: stable@vger.kernel.org # v6.11+ Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155912.4049340-2-maciej.falkowski@linux.intel.com
2025-04-11platform/x86: amd: pmf: Fix STT limitsMario Limonciello
On some platforms it has been observed that STT limits are not being applied properly causing poor performance as power limits are set too low. STT limits that are sent to the platform are supposed to be in Q8.8 format. Convert them before sending. Reported-by: Yijun Shen <Yijun.Shen@dell.com> Fixes: 7c45534afa443 ("platform/x86/amd/pmf: Add support for PMF Policy Binary") Cc: stable@vger.kernel.org Tested-by: Yijun Shen <Yijun_Shen@Dell.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250407181915.1482450-1-superm1@kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()David Thompson
A warning is seen when running the latest kernel on a BlueField SOC: [251.512704] ------------[ cut here ]------------ [251.512711] invalid sysfs_emit: buf:0000000003aa32ae [251.512720] WARNING: CPU: 1 PID: 705264 at fs/sysfs/file.c:767 sysfs_emit+0xac/0xc8 The warning is triggered because the mlxbf-bootctl driver invokes "sysfs_emit()" with a buffer pointer that is not aligned to the start of the page. The driver should instead use "sysfs_emit_at()" to support non-zero offsets into the destination buffer. Fixes: 9886f575de5a ("platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()") Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20250407132558.2418719-1-davthompson@nvidia.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V dataHans de Goede
The Vexia EDU ATLA 10 tablet comes in 2 different versions with significantly different mainboards. The only outward difference is that the charging barrel on one is marked 5V and the other is marked 9V. Both are x86 ACPI tablets which ships with Android x86 as factory OS. with a DSDT which contains a bunch of I2C devices which are not actually there, causing various resource conflicts. Enumeration of these is skipped through the acpi_quirk_skip_i2c_client_enumeration(). Extend the existing support for the 9V version by adding support for manually instantiating the I2C devices which are actually present on the 5V version by adding the necessary device info to the x86-android-tablets module. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250407092017.273124-2-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbolsHans de Goede
The Vexia EDU ATLA 10 tablet comes in 2 different versions with significantly different mainboards. The only outward difference is that the charging barrel on one is marked 5V and the other is marked 9V. Both need to be handled by the x86-android-tablets code. Add 9v to the symbols for the existing support for the 9V Vexia EDU ATLA 10 tablet symbols to prepare for adding support for the 5V version. All this patch does is s/vexia_edu_atla10_info/vexia_edu_atla10_9v_info/. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250407092017.273124-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11asus-laptop: Fix an uninitialized variableDenis Arefev
The value returned by acpi_evaluate_integer() is not checked, but the result is not always successful, so it is necessary to add a check of the returned value. If the result remains negative during three iterations of the loop, then the uninitialized variable 'val' will be used in the clamp_val() macro, so it must be initialized with the current value of the 'curr' variable. In this case, the algorithm should be less noisy. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b23910c2194e ("asus-laptop: Pegatron Lucid accelerometer") Cc: stable@vger.kernel.org Signed-off-by: Denis Arefev <arefev@swemel.ru> Link: https://lore.kernel.org/r/20250403122603.18172-1-arefev@swemel.ru Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11accel/ivpu: Update FW Boot API to version 3.28.3Karol Wachowski
Update firmware Boot API to 3.28.3 version and adjust driver to API changes for preemption buffers. Use new preemption buffer size fields from FW header added to firmware boot API for preemption buffers allocations, if those new fields are zeroed, use old values instead. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155817.4049220-1-maciej.falkowski@linux.intel.com
2025-04-11accel/ivpu: Flush pending jobs of device's workqueuesMaciej Falkowski
Use flush_work() instead of cancel_work_sync() for driver IRQ workqueues to guarantee that remaining pending work will be handled. This resolves two issues that were encountered where a driver was left in an incorrect state as the bottom-half was canceled: 1. Cancelling context-abort of a job that is still executing and is causing translation faults which is going to cause additional TDRs 2. Cancelling bottom-half of a DCT (duty-cycle throttling) request which will cause a device to not be adjusted to an external frequency request. Fixes: bc3e5f48b7ee ("accel/ivpu: Use workqueue for IRQ handling") Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155755.4049156-1-maciej.falkowski@linux.intel.com
2025-04-11x86/xen: Fix __xen_hypercall_setfunc()Jason Andryuk
Hypercall detection is failing with xen_hypercall_intel() chosen even on an AMD processor. Looking at the disassembly, the call to xen_get_vendor() was removed. The check for boot_cpu_has(X86_FEATURE_CPUID) was used as a proxy for the x86_vendor having been set. When CONFIG_X86_REQUIRED_FEATURE_CPUID=y (the default value), DCE eliminates the call to xen_get_vendor(). An uninitialized value 0 means X86_VENDOR_INTEL, so the Intel function is always returned. Remove the if and always call xen_get_vendor() to avoid this issue. Fixes: 3d37d9396eb3 ("x86/cpufeatures: Add {REQUIRED,DISABLED} feature configs") Suggested-by: Juergen Gross <jgross@suse.com> Signed-off-by: Jason Andryuk <jason.andryuk@amd.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Xin Li (Intel)" <xin@zytor.com> Link: https://lore.kernel.org/r/20250410193106.16353-1-jason.andryuk@amd.com
2025-04-11xen: fix multicall debug featureJuergen Gross
Initializing a percpu variable with the address of a struct tagged as .initdata is breaking the build with CONFIG_SECTION_MISMATCH_WARN_ONLY not set to "y". Fix that by using an access function instead returning the .initdata struct address if the percpu space of the struct hasn't been allocated yet. Fixes: 368990a7fe30 ("xen: fix multicall debug data referencing") Reported-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: "Borislav Petkov (AMD)" <bp@alien8.de> Tested-by: "Borislav Petkov (AMD)" <bp@alien8.de> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20250327190602.26015-1-jgross@suse.com>
2025-04-11iommu/ipmmu-vmsa: Register in a sensible orderRobin Murphy
IPMMU registers almost-initialised instances, but misses assigning the drvdata to make them fully functional, so initial calls back into ipmmu_probe_device() are likely to fail unnecessarily. Reorder this to work as it should, also pruning the long-out-of-date comment and adding the missing sysfs cleanup on error for good measure. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/53be6667544de65a15415b699e38a9a965692e45.1742481687.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-04-11iommu: Clear iommu-dma ops on cleanupRobin Murphy
If iommu_device_register() encounters an error, it can end up tearing down already-configured groups and default domains, however this currently still leaves devices hooked up to iommu-dma (and even historically the behaviour in this area was at best inconsistent across architectures/drivers...) Although in the case that an IOMMU is present whose driver has failed to probe, users cannot necessarily expect DMA to work anyway, it's still arguable that we should do our best to put things back as if the IOMMU driver was never there at all, and certainly the potential for crashing in iommu-dma itself is undesirable. Make sure we clean up the dev->dma_iommu flag along with everything else. Reported-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Closes: https://lore.kernel.org/all/CAGXv+5HJpTYmQ2h-GD7GjyeYT7bL9EBCvu0mz5LgpzJZtzfW0w@mail.gmail.com/ Tested-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/e788aa927f6d827dd4ea1ed608fada79f2bab030.1744284228.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-04-11iommu/vt-d: Remove an unnecessary call set_dma_ops()Petr Tesarik
Do not touch per-device DMA ops when the driver has been converted to use the dma-iommu API. Fixes: c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops") Signed-off-by: Petr Tesarik <ptesarik@suse.com> Link: https://lore.kernel.org/r/20250403165605.278541-1-ptesarik@suse.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-04-11iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIsSean Christopherson
Set the posted MSI irq_chip's irq_ack() hook to irq_move_irq() instead of a dummy/empty callback so that posted MSIs process pending changes to the IRQ's SMP affinity. Failure to honor a pending set-affinity results in userspace being unable to change the effective affinity of the IRQ, as IRQD_SETAFFINITY_PENDING is never cleared and so irq_set_affinity_locked() always defers moving the IRQ. The issue is most easily reproducible by setting /proc/irq/xx/smp_affinity multiple times in quick succession, as only the first update is likely to be handled in process context. Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs") Cc: Robert Lippert <rlippert@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Wentao Yang <wentaoyang@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20250321194249.1217961-1-seanjc@google.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-04-11iommu: Fix crash in report_iommu_fault()Fedor Pchelkin
The following crash is observed while handling an IOMMU fault with a recent kernel: kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: ffff8c708299f700 PGD 19ee01067 P4D 19ee01067 PUD 101c10063 PMD 80000001028001e3 Oops: Oops: 0011 [#1] SMP NOPTI CPU: 4 UID: 0 PID: 139 Comm: irq/25-AMD-Vi Not tainted 6.15.0-rc1+ #20 PREEMPT(lazy) Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN50WW 09/27/2024 RIP: 0010:0xffff8c708299f700 Call Trace: <TASK> ? report_iommu_fault+0x78/0xd3 ? amd_iommu_report_page_fault+0x91/0x150 ? amd_iommu_int_thread+0x77/0x180 ? __pfx_irq_thread_fn+0x10/0x10 ? irq_thread_fn+0x23/0x60 ? irq_thread+0xf9/0x1e0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 ? kthread+0xfc/0x240 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> report_iommu_fault() checks for an installed handler comparing the corresponding field to NULL. It can (and could before) be called for a domain with a different cookie type - IOMMU_COOKIE_DMA_IOVA, specifically. Cookie is represented as a union so we may end up with a garbage value treated there if this happens for a domain with another cookie type. Formerly there were two exclusive cookie types in the union. IOMMU_DOMAIN_SVA has a dedicated iommu_report_device_fault(). Call the fault handler only if the passed domain has a required cookie type. Found by Linux Verification Center (linuxtesting.org). Fixes: 6aa63a4ec947 ("iommu: Sort out domain user data") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250408213342.285955-1-pchelkin@ispras.ru Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-04-11drm/i915/debugfs: move PCH type to display capsJani Nikula
Arguably PCH is more relevant to display. Move the information to display caps debugfs. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/a864b7a577ea7a3bd2435e9734e023593edbfd5a.1744295009.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-04-11drm/i915/debugfs: remove i915_display_capabilitiesJani Nikula
Turns out we've added two similar debugfs files. Consolidate on intel_display_caps as it has more info and a driver independent name. IGT has already switched over to intel_display_caps in IGT commit cf837fc17d6c ("lib/dsc: use intel_display_caps instead of i915_display_capabilities"). Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/241c5886cf2e95c694a693bb1b1953f6ae15390e.1744295009.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-04-11x86/i8253: Call clockevent_i8253_disable() with interrupts disabledFernando Fernandez Mancera
There's a lockdep false positive warning related to i8253_lock: WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ... systemd-sleep/3324 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: ffffffffb2c23398 (i8253_lock){+.+.}-{2:2}, at: pcspkr_event+0x3f/0xe0 [pcspkr] ... ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0xd0/0x2f0 _raw_spin_lock+0x30/0x40 clockevent_i8253_disable+0x1c/0x60 pit_timer_init+0x25/0x50 hpet_time_init+0x46/0x50 x86_late_time_init+0x1b/0x40 start_kernel+0x962/0xa00 x86_64_start_reservations+0x24/0x30 x86_64_start_kernel+0xed/0xf0 common_startup_64+0x13e/0x141 ... Lockdep complains due pit_timer_init() using the lock in an IRQ-unsafe fashion, but it's a false positive, because there is no deadlock possible at that point due to init ordering: at the point where pit_timer_init() is called there is no other possible usage of i8253_lock because the system is still in the very early boot stage with no interrupts. But in any case, pit_timer_init() should disable interrupts before calling clockevent_i8253_disable() out of general principle, and to keep lockdep working even in this scenario. Use scoped_guard() for that, as suggested by Thomas Gleixner. [ mingo: Cleaned up the changelog. ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/Z-uwd4Bnn7FcCShX@gmail.com
2025-04-11MAINTAINERS: update my email addressMark Brown
Merge series from srinivas.kandagatla@linaro.org: Update .mailmap and MAINTAINERS to point to the @kernel.org instead of the @linaro.org. Linaro address will stop working in few days.
2025-04-10Merge tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, as expected it has a bit more in it than probably usual for rc2. amdgpu/xe/i915 lead the way with fixes all over for a bunch of other drivers. Nothing major stands out from what I can see. tests: - Clean up struct drm_display_mode in various places i915: - Fix scanline offset for LNL+ and BMG+ - Fix GVT unterminated-string-initialization build warning - Fix DP rate limit when sink doesn't support TPS4 - Handle GDDR + ECC memory type detection - Fix VRR parameter change check - Fix fence not released on early probe errors - Disable render power gating during live selftests xe: - Add another BMG PCI ID - Fix UAFs on migration paths - Fix shift-out-of-bounds access on TLB invalidation - Ensure ccs_mode is correctly set on gt reset - Extend some HW workarounds to Xe3 - Fix PM runtime get/put on sysfs files - Fix u64 division on 32b - Fix flickering due to missing L3 invalidations - Fix missing error code return amdgpu: - MES FW version caching fixes - Only use GTT as a fallback if we already have a backing store - dma_buf fix - IP discovery fix - Replay and PSR with VRR fix - DC FP fixes - eDP fixes - KIQ TLB invalidate fix - Enable dmem groups support - Allow pinning VRAM dma bufs if imports can do P2P - Workload profile fixes - Prevent possible division by 0 in fan handling amdkfd: - Queue reset fixes imagination: - Fix overflow - Fix use-after-free ivpu: - Fix suspend/resume nouveau: - Do not deref dangling pointer rockchip: - Set DP/HDMI registers correctly udmabuf: - Fix overflow virtgpu: - Set reservation lock on dma-buf import - Fix error handling in prepare_fb" * tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel: (58 commits) drm/rockchip: dw_hdmi_qp: Fix io init for dw_hdmi_qp_rockchip_resume drm/rockchip: vop2: Fix interface enable/mux setting of DP1 on rk3588 drm/amdgpu/mes12: optimize MES pipe FW version fetching drm/amd/pm/smu11: Prevent division by zero drm/amdgpu: cancel gfx idle work in device suspend for s0ix drm/amd/display: pause the workload setting in dm drm/amdgpu/pm/swsmu: implement pause workload profile drm/amdgpu/pm: add workload profile pause helper drm/i915/huc: Fix fence not released on early probe errors drm/i915/vrr: Add vrr.vsync_{start, end} in vrr_params_changed drm/tests: probe-helper: Fix drm_display_mode memory leak drm/tests: modes: Fix drm_display_mode memory leak drm/tests: modes: Fix drm_display_mode memory leak drm/tests: cmdline: Fix drm_display_mode memory leak drm/tests: modeset: Fix drm_display_mode memory leak drm/tests: modeset: Fix drm_display_mode memory leak drm/tests: helpers: Create kunit helper to destroy a drm_display_mode drm/xe: Restore EIO errno return when GuC PC start fails drm/xe: Invalidate L3 read-only cachelines for geometry streams too drm/xe: avoid plain 64-bit division ...
2025-04-10ipv6: add exception routes to GC list in rt6_insert_exceptionXin Long
Commit 5eb902b8e719 ("net/ipv6: Remove expired routes with a separated list of routes.") introduced a separated list for managing route expiration via the GC timer. However, it missed adding exception routes (created by ip6_rt_update_pmtu() and rt6_do_redirect()) to this GC list. As a result, these exceptions were never considered for expiration and removal, leading to stale entries persisting in the routing table. This patch fixes the issue by calling fib6_add_gc_list() in rt6_insert_exception(), ensuring that exception routes are properly tracked and garbage collected when expired. Fixes: 5eb902b8e719 ("net/ipv6: Remove expired routes with a separated list of routes.") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/837e7506ffb63f47faa2b05d9b85481aad28e1a4.1744134377.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-10Merge tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: "Mostly minor fixes. Eric Biggers' crypto API conversion is included because of long standing sporadic crashes - mostly, but not entirely syzbot - in the crypto API code when calling poly1305, which have been nigh impossible to reproduce and debug. His rework deletes the code where we've seen the crashes, so either it'll be a fix or we'll end up with backtraces we can debug. (Thanks Eric!)" * tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs: bcachefs: Use sort_nonatomic() instead of sort() bcachefs: Remove unnecessary softdep on xxhash bcachefs: use library APIs for ChaCha20 and Poly1305 bcachefs: Fix duplicate "ro,read_only" in opts at startup bcachefs: Fix UAF in bchfs_read() bcachefs: Use cpu_to_le16 for dirent lengths bcachefs: Fix type for parameter in journal_advance_devs_to_next_bucket bcachefs: Fix escape sequence in prt_printf
2025-04-10perf libunwind arm64: Fix missing close parens in an if statementArnaldo Carvalho de Melo
While testing building with libunwind (using LIBUNWIND=1) in various arches I noticed a problem on arm64, on an rpi5 system, a missing close parens in a change related to dso__data_get_fd() usage, fix it. Fixes: 5ac22c35aa8519f1 ("perf dso: Use lock annotations to fix asan deadlock") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/Z_Z3o8KvB2i5c6ab@x1 Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-04-10io_uring/zcrx: enable tcp-data-split in selftestDavid Wei
For bnxt when the agg ring is used then tcp-data-split is automatically reported to be enabled, but __net_mp_open_rxq() requires tcp-data-split to be explicitly enabled by the user. Enable tcp-data-split explicitly in io_uring zc rx selftest. Signed-off-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250409163153.2747918-1-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11Merge tag 'drm-xe-fixes-2025-04-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Add another BMG PCI ID - Fix UAFs on migration paths - Fix shift-out-of-bounds access on TLB invalidation - Ensure ccs_mode is correctly set on gt reset - Extend some HW workarounds to Xe3 - Fix PM runtime get/put on sysfs files - Fix u64 division on 32b - Fix flickering due to missing L3 invalidations - Fix missing error code return Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/unq5j26aejbrjz5nuvmdtcgupyix5bacpoahod4bdohlvwrney@kekimsi5ossx
2025-04-11Merge tag 'drm-misc-fixes-2025-04-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: imagination: - Fix overflow - Fix use-after-free ivpu: - Fix suspend/resume nouveau: - Do not deref dangling pointer rockchip: - Set DP/HDMI registers correctly tests: - Clean up struct drm_display_mode in various places udmabuf: - Fix overflow virtgpu: - Set reservation lock on dma-buf import - Fix error handling in prepare_fb Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250410122414.GA32202@2a02-2454-fd5e-fd00-d686-8907-6053-f8d8.dyn6.pyur.net
2025-04-10drm/xe: Allow to drop vram resizingLucas De Marchi
The default behavior if the LMEMBAR doesn't match the maximum possible size is to try to resize it. However the user might want to keep, even for testing the behavior with small BAR, whatever size was set via sysfs. Change the module parameter to int and check for negative value. Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://lore.kernel.org/r/20250409-bar-resize-param-v1-1-75bf4df38aa0@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-04-10Merge tag 'irq-urgent-2025-04-10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc irqchip fixes from Ingo Molnar: - Fix NULL pointer dereference crashes due to missing .chip_flags setup in the sg2042-msi and irq-bcm2712-mip irqchip drivers - Remove the davinci aintc irqchip driver's leftover header too * tag 'irq-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-bcm2712-mip: Set EOI/ACK flags in msi_parent_ops irqchip/sg2042-msi: Add missing chip flags irqchip/davinci: Remove leftover header
generated by cgit (git 2.34.1) at 2025-09-21 23:40:27 +0000